Alias of VISA to the Protocol TCP/IP without MAX

Similar Questions

• Make Oracle ASM is supported via the Protocol of the TCPS?

  Hello
  
  Make Oracle ASM is supported via the Protocol of the TCPS? The connectivity of the ASM is supported via SSL connection? I'm not able to get documents appropriate for this setting. Could you help me find the configuration related to this?
  
  Thanks in advance.
  Kind regards
  Mukesh

  Bjoern Rost says:
  I have no idea what TCPS is supposed to be, and I don't know why you would want to use SSL when connecting to an instance of the DSO. ASM communication takes place between an instance of Oracle (database) and an instance of the ASM on the same host, and I simply don't understand why you would want to encrypt it.

  Agree with that.

  The ASM and the database are always on the same host. They communicate with each other directly through a CRS daemon.
  It is NOT possible to have the ASM remotely on another server. Discussions about protocols is therefore not useful

• Lost the remote TCP/IP connection through NOR-MAX

  "" Hi, I try remotely LeCroy WaveRunner 104Xi oscilloscope through "resources VISA TCP/IP" option in Control Panel OR MAX, but the VISA session is lost (0xBFFF00A6) right after I viWrite the '* IDN?" order several times.

  Here's my full configuration process:
  1. install the Passport VISA LeCroyVICPPassportInstaller_1.0.8.exe , LeCroy oscilloscope

  2. setting of the session to follow the instructions (as per joint, LAB_WM827.pdf)

  [by the way, I'm not able to configure the session as "VCIP:'type', I only be able to configure the session asTCPIP0:: 1861:OCKET" ""]
     
      TCP/IP resources VISA-> Create TCP/IP new resource...-> Raw Socket
     Set the IP address: 137.57.96.8 (this IP address is successful to be ping by PC and this address is of course belong to the 104Xi WaveRunner oscilloscope)
  Set the port number: 1861

  3. then, there will be a new resource under "resources VISA TCP/IP". Select this option and 'VISA Open Session'. A dialog box will be retractable to the communication of the instrument.

  4. go to the tab "viSetAttribute", the value VI_ATTR_TCP_KEEPALIVE to VI_TRUE, VI_ATTR_TMO_VALUE the value of 15000.

  * NOR-MAX Version: 3.1.1.3004
  * Connection: The ethernet cable is used through the server (No 1 to 1 connection) of the company,

  "After all this, I send '* IDN? \n"(dans l'onglet viWrite ), it returns the value 0 (which means no error occur) and return 6 counts. " So I try to read a buffer (in the viRead tab), but it send me error timeout (VI_ERROR_TMO). After that, I erase the buffer in viClear. Then, I repeat same steps, this time he (viRead) return me connection lost error (VI_ERROR_CONN_LOST).

  This situation is repeated every time that I reopen it new session. In the meantime, I also doubt that the viWrite did send the command to the oscilloscope or not. The oscilloscope was no response after that I have send "ASET" (WaveRunner 104Xi order for autosetup oscilloscope) through the viWrite tab.

  I am out of ideas now.

  What's my configuration OR-MAX problem? or hardware problem? or a server problem?

  Please advice... need help badly.

  Thanks in advance.

  Hi wcsoh,

  Alan and LeCroy Support here...

  Use the type of connection (LXI).  The problem is that when you use the connection TCP/IP (ACIP) type, you cannot configure the WaveRunner 104MXi as a resource of VISA's TCP/IP in MAX.   Note that MAX is not 'hip' to recognize any instrument type TCPIP, including extended via ACIP LeCroy.  To use LXI, go to utilities > utility configuration... and then to the 'Remote' tab, where you will find the button on the left side of the screen of config to use 'LXI '.  If you don't see this button, you will probably need to update your firmware.

  With the type of connection (LXI), you can automatically find the scope through MAX, enter this amount as a VISA TCP/IP resource and configure an alias as well...  You can also point your web browser to the IP address of the bezel, and you will see a status page with information, including the name VISA always useful resource to use when you configure the scope in MAX.  (Note, however, there is no need to use MAX at all when the connections of VISA to LeCroy oscillloscopes!)

  Here is a link to an application note written by me which deals with the LXI interface, including information about the configuration of MAX to show scope: http://www.lecroy.com/tm/library/AppNotes/LXI/LXI_Interfacing_AppNote.pdf

  Do not hesitate to contact me for any question!

  Best regards

  Alan Blankman

• NiVisa with the Protocol P849

  I have a piece of equipment that requires P849 protocol via RS232-C. I can connect to the device using NOR-M & A Explorer on device COM1 (ASRL1). The Protocol is simple, send ascii 5 (character ENQ) and equipment with ascii 6 (character ACK) responses for the handshake. Then the commands start with ascii 2 (character STX) follow-up followed by ascii 3 (character ETX). I see the right answers but keep getting errors TMO... I tried different settings of VI_ATTR, but no progress.

  Is this just a problem with the settings VI_ATTR or NiVisa can simply not to handle this Protocol?

  Diary of NOR-SPY home.

  Thanks in advance.

  I can't help with the Java application, but I did a couple of different ways, and you do not really set the size of the buffer - you set the number of bytes to read into the buffer.

  If I need to check that the equipment responds with the correct characters, I will first put the term tank turn off. then, after the entry VISA, I'll use the function to determine the number of bytes in the buffer (VI_ATTR_ASRL_AVAIL_NUM). I'll pass this number to playback VISA. I'll analyze the string returned for anything that is unique or more characters I want. It is in a loop, and if the expected characters are there, the loop stops. If they are not, so the loop continues. I place a function of time-out (separate from the integrated delay of VISA) and returns an error if characters are never seen. The characters form a chain that I pass to this function of general reading.

  Another technique to use is simply not care if the instrument is back all the correct acknowledgments and simply read what is returned. In this case, I have a loop with the VI_ATTR_ASRL_AVAIL_NUM function and leave the loop when the number is greater than 0 (there also a function of time-out here as well if the instrument never replies with anything). Then another loop is called and there is also VI_ATTR_ASRL_AVAIL_NUM to change the number of bytes to read VISA. This loop stops when the number of bytes is 0.

  What technique do you use is up to you. There is more in the first technique of error checking. The second is rather Hyperterminal works. You get just whatever the instrument sends.

• Darkness of 8.4 (1) vpn L2L filter ASA when you specify the Protocol and port

  Hi all - I've spent many hours trying to diagnose this and have read several discussions and the Cisco docs unsuccessfully...

  Situation: two sites running Cisco ASA 5520 on 8.4 (1) with L2L IPsec on the public internet between each of them. The configuration of IPsec and associated routing works as it should and we are able to pass traffic between networks private behind each device as expected. The problem occurs when you try to block sessions using a vpn-filter group policy configuration.

  Each site has 3 private subnets that are able to communicate correctly without the vpn-filter configuration. We want to restrict access to specific protocols, hosts, and ports between each network.

  SITE A: 10.10.0.0/18, 10.10.64.0/18, 10.10.128.0/18

  SITE B: 10.20.0.0/18, 10.20.64.0/18, 10.20.128.0/18

  When we apply a filter-vpn configuration which restricted access only two guests, as follows...

  SITE A: vpn_acl_x_x_x_x list extended access permit ip host 10.20.0.1 host 10.10.0.1

  SITE b: the ip host 10.10.0.1 allowed extended access list vpn_acl_x_x_x_x host 10.20.0.1

  ... the configuration works correctly. However, when we try to lock the configuration more far and specify the protocols and ports, as follows...

  SITE A: vpn_acl_x_x_x_x list extended access permit tcp host 10.20.0.1 host 10.10.0.1 eq 22

  SITE b: vpn_acl_x_x_x_x to the list of access permit tcp host 10.10.0.1 host 10.20.0.1 eq 22

  ... and then try to establish a SSH connection between 10.10.0.1 and 10.20.0.1 or vice versa, the package is stopped on the side of the SOURCE. ..

  Mar 22 11:58:01 x.x.x.x 22 March 2011 14:34:56: % ASA-4-106103: vpn_acl_x_x_x_x of the access list refused tcp to the user "" inside-data/10.10.0.1(59112)-> outside-iptrans/10.20.0.1(22) hit - cnt 1 first success [0xd8d1c1b4, 0 x 0]

  I would really appreciate it if someone could shed some light on what is wrong with this Setup.

  SOLUTION
  

  The ACE must be implemented on the source and the end of the tunnel destination to facilitate this configuration.

  EXAMPLE 1: allow SSH two-way communication between hosts on each network (SITE A can connect to SITE B, SITE B can connect to SITE A)...

  SITE A:
  access-list vpn_acl_x_x_x_x extended permit tcp host 10.20.0.1 host 10.10.0.1 eq 22
  access-list vpn_acl_x_x_x_x extended permit tcp host 10.20.0.1 eq 22 host 10.10.0.1
  SITE B:
  access-list vpn_acl_x_x_x_x extended permit tcp host 10.10.0.1 host 10.20.0.1 eq 22
  access-list vpn_acl_x_x_x_x extended permit tcp host 10.10.0.1 eq 22 host 10.20.0.1
  

  EXAMPLE 2: allow communication one-way SSH between hosts on each network (SITE A can connect to SITE B, SITE B is unable to connect to SITE A)...

  SITE A:
  access-list vpn_acl_x_x_x_x extended permit tcp host 10.20.0.1 eq 22 host 10.10.0.1
  SITE B:
  access-list vpn_acl_x_x_x_x extended permit tcp host 10.10.0.1 host 10.20.0.1 eq 22
  

  Very good and thank you for this post. Please kindly marks the message as answered while others may learn from your post. I think that you have started a very good discussion on vpn-filter for tunnel L2L.

• Add the Protocol for magnet links Manager

  I try to get firefox to call a custom software when it encounters a magnet url. I added the Protocol (HKEY_CLASSES_ROOT > magnet > shell > open > order) with regedit. It seems be added correctly, since Chrome is able to understand without additional configuration.

  I tried to add the boolean Network.protocol - handler.expose.magnet in subject key: config in firefox. Nor have the false value, no real changes anything.

  The error I get is along the lines with "firefox doesn't know how to open the magnet Protocol because it is not associated with any program"(mon message n'est pas en anglais traduction donc pas exacte). "»

  In addition, no record of the magnet is available under programs in the firefox settings.

  My version of Firefox is 17.0.1
  The association of programs I put in regedit is 'E:\Program\Python27\pythonw.exe' 'E:\Program\Misc\magnet_add.pyw' '%1'

  Thanks in advance for your help

  Did you check that?

  • http://KB.mozillazine.org/Register_protocol

• Name of the Protocol have disappeared from the link tooltip

  Previously, when I hover over the link on a page, it showed tooltip like this:
  http://www.Google.com/
  but now it shows www.google.com. It's confusing, how to get back a normal behavior?

  The Protocol (http://) was removed from the URL in the location bar for http:// only pages in Firefox 7 and newer versions. Secure pages will always show the https:// Protocol. This can be confusing for some users. There is also a bug known, where if you copy the URL after selection of the awesome bar dropdown (but before loading the page) it does not include the http:// part.

  Users can revert to the old behavior by setting browser.urlbar.trimURLs to false in about: config

  1. type of topic: config in the URL/address bar and press the Enter key
  2. If you see a cautionary, accept it (promise to be careful)
  3. Search = browser.urlbar.trimURLs
  4. Double-click the pref in the lower panel of toggle it on 'false' OR , do a right-click on the pref in the lower panel, then choose "Toggle" switch it on "false."
  5. close the topic: config tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• I try to get Firefox to open Vuze when I click on a magnet link, I get the following message: Firefox doesn't know how to open this address, because the Protocol (loving) is not associated with any program. tell me the solution

  When I try to open a torrent using magnet, I get the following message. Firefox doesn't know how to open this address because the Protocol (loving) is not binding to any program.

  I had this problem and just reinstalled Firefox. Problem solved. In my case, I believe that it is through the installation of FlashGet. Although I uninstalled FlashGet, it had outstripped the Magnet links / Protocol. I hope this helps you with your instance. Fortunately, I had Setup for my version of Firefox (7.0.1) registered and used that but you might need to search for your current version or install a later version

• After that the upgrade of my URL bar no longer displays the Protocol.

  After that the upgrade to Firefox 7.0 my URL bar is no longer shows me what protocol is used when you use http port 80. How can I turn this feature on?

  The Protocol (http://) was removed from the URL in the location bar for pages http:// only. https:// pages will always have the Protocol. This can be confusing for some users. There is also a bug known, where if you copy the URL after selection of the awesome bar dropdown (but before loading the page) it does not include the http:// part.

  Users can revert to the old behavior by setting browser.urlbar.trimURLs to false in about: config

  1. type of topic: config in the URL/address bar and press the Enter key
  2. If you see a cautionary, accept it (promise to be careful)
  3. Filter = browser.urlbar.trimURLs
  4. Double-click the pref in the lower panel of toggle it on 'false' OR , do a right-click on the pref in the lower panel, then choose "Toggle" switch it on "false."
  5. close the topic: config tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Problem of the intranet: "Firefox doesn't know how to open this address, because the Protocol (k) is not associated with any program."

  Creation of an intranet to a collection of security videos and am linking to a video through a picture icon in the form of:
  < a href = "K: \'link to the movie" > ""
  < /a >

  Overview on the works of IE9, the movie starts when the splash screen is clicked, but in Firefox, I get the alert "Firefox doesn't know how to open this address, because the Protocol (k) is not associated with any program."

  InterLan VLC is the video player by default on the PC. I don't want to put video controls anywhere in the page.

  I code for XHTML 1.1 strict with CSS 2.1, and Firefox 5 handles all of my eccentric styles while IE9 has a few issues, while Firefox is my browser of choice.

  Looking at my Options in Firefox, 'File Windows Media audio/video' is configured to use VLC.exe, so I'm always looking to solve this problem.

  Any Suggestions?

  You must use the Protocol file:// (file:///k:/link_to_movie).
  Easier to see the links to use are to open a file via file > open a file

  • http://KB.mozillazine.org/Links_to_local_pages_do_not_work

• [Solved] Message "Firefox can't open this address, because the Protocol (icyx) is not associated with any program. icyx://stream-16.streamsolutions.co.UK:9102

  Hello
  Firefox doesn't know how to open this address because the Protocol
  (icyx) is not associated with any program.
  This happens when I open a radio station - lmradio.net / and then try to
  play with my Windows media player. All of a sudden, it happened that I had no problem before yesterday.
  My OS is Windows 7 Pro.
  Concerning
  David Rennie

  You install the Orban/Coding Technologies AAC/HE-AAC Player plugin.

  This solves the problem.

• I have updated and now when I try to log on to Web sites with fingerprint reader, I get "Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program."

  I have updated and now when I try to log on to Web sites with fingerprint reader, I get "Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program."

  What is the Digital Persona fingerprint scanner? If it's that they have abandoned, for more details, see https://support.mozilla.com/en-US/questions/799388

• Impossible to download music - error message reads "Firefox doesn't know how to open this address, because the Protocol (wmms) is not associated with any program."

  I bought a song to download from Wal - Mart.com and received the error message when I tried to download the song. "Firefox doesn't know how to open this address, because the Protocol (wmms) is not associated with any program." I've never had a problem before. I paid for this download & even I can't access it.

  The site of Wal-Mart offer a plugin or program (Walmart MP3 music downloads) to manage this Protocol?

  See:

  • http://MP3.Walmart.com/store/help/help.htm
  • http://MP3.Walmart.com/store/help/downloading.htm

  On a protocol must be enrolled in a program for Windows that supports this Protocol.

  See also http://kb.mozillazine.org/Register_protocol

• It began to appear in the first inch of each merchant site I visit with the new version, "Congratulations!" Every $5 spent at JCPenney saves you a chance to win a $500 gift card. I have run scans and nothing appears not infected, but I do not understand t

  It began to appear in the first inch of each merchant site I visit with the new version, "Congratulations!" Every $5 spent at JCPenney saves you a chance to win a $500 gift card. I have run scans and nothing appears not infected, but I don't get that annoying block in Internet Explorer. I uninstalled and reinstalled firefox and when I did, the first thing is present at his inauguration was a message that says: "you have joined the shop now...". "something or another and I had to click OK, it was a microsoft OK message. How can I get rid of this?

  URL of affected sites

  http://www.BestBuy.com, target.com, any site of retail trade

  Your problem can be caused by Malware. You can run and update according to free anti-virus software:

  1. Malwarebytes (free version) - http://www.malwarebytes.org

  2. Spybot Search & Destroy - http://www.safer-networking.org

  3. Spyware Terminator - http://www.spywareterminator.com

  In addition, there are a number of forums, you can use to help get rid you of your infection. It is:

  • Bleeping Computer
  • Safer-Networking Forums
  • Spyware Warrior forums
  • SpywareInfo Forums

• Replicate Readynas does not - code output: 12 (error in the protocol stream)

  Hello, I hope someone can help,

  Having a problem with a 212 and repeated.

  I get the below error

  Files size: 312,82 GB

  Total of files transferred from size: 0 B

  Average speed: 0 B/s

  Exit code: 12 (error in the protocol stream)

  It worked until 6.5.2 update and I have restarted both readynas since then and still today.

  Anyone know what is happening?

  Thank you for your answer, you're the only guy who answers on here haha!

  We have 8 different jobs repeated or main nas and 6 of them work and 2 did not, after changing the routes over which the readynas uses to go to the internet, they are all seem to be working now, very strange as the other 6 worked a treat.

  You can mark it as fixed, will update all the nas with the last update this week.