Alienware 17 R3 - BSOD ISSUE/FIX - killer E2400 Ethernet Driver / Version: 1.1.56.1236_A01

Similar Questions

• BSOD issues before and after a clean windows 7 installed

  Hey, I get BSOD issues after a clean install of windows and I also replaced my RAM with sticks again because I thought that my memory was damaged for some reason any. Is it possible that my hard drive is bad?

  Here's my minidump file:

  https://www.dropbox.com/s/paqnfyylg5yw2bw/012416-20420-01.dmp?DL=0

  Hello

  Since you did a clean install this strongly points to material with only one
  small chance, it is the BIOS, chipset drivers or others. Could be the hard drive, the
  wiring for the hard drive or other hardware.

  BugCheck F4, {3, fffffa800df48060, fffffa800df48340, fffff80002b97f40}

  ETW unavailable minidump
  Probably caused by: ntkrnlmp.exe (nt! PspCatchCriticalBreak + 92)

  Ntkrnlmp.exe is a component of Windows which means than anything else he has led astray.

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  ---------------------------------------------------------------------------------------------

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  ========================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) in fact
  delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
  memory and possibly check the connection/contacts on the hard drive. Memory could
  be the problem, so if you have more than 1 stick swap them in and out to see if the
  problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
  have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other software to control.

  Also check the wiring on the hard drive.

  =========================================================

  BCCode: F4 0x000000F4<-- read="" this="">

  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION
  https://msdn.Microsoft.com/en-us/library/ff560372%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  =========================================================

  These can help:

  Remove ALL power. Then carefully remove the cards one time and put them
  back in their locations. Do the same for memory, then the cables. A coward or
  corroded connection point may cause strange problems.

  Reinstall the expansion cards
  http://pcsupport.about.com/od/fixtheproblem/SS/Reseat-excards.htm

  How to reinstall a desktop memory Module
  http://pcsupport.about.com/od/fixtheproblem/SS/reseat_memory.htm

  The relocation of the supply and internal data cables
  http://pcsupport.about.com/od/fixtheproblem/SS/Reseat-power-cables-data-cables.htm

  Reinstalling your RAM, graphics card and hard drive
  http://www.YouTube.com/watch?v=DLxNPBQBfT8

  ---------------------------------------------------------------------------------------

  You may need to check with the mother system/card manufacturer or a computer
  Shop (that makes its own service in the workshop).

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Pavilion 15 laptop: Could you please tell me why I get a BSOD if I updated my graphics driver AMD?

  I am facing this problem for months, I never update my graphics driver as usual, it slows down the PC and causes the BSOD. I use the graphics driver that is downloaded from the HP site and it does never BSOD. But sometimes my ATI graphic driver stops working, updates Windows shows me an update for the driver, but every time I've updated to use, the computer stops working, and it gives me screen all black when I turn it on, so I have to reinstall windows again and again if I've never updated my graphics driver. My PC is HP Pavilion E033TX 15, I hope someone could help me solve this issue. Thank you!

  Do not let Windows update to install the AMD\ATI driver. Change the Windows Update settings for "Let me know if there are updates available so I can decide whether to download and install updates" to avoid the problem reoccur.

  Computers laptop switchable graphics require a specially updated the driver provided by HP for your laptop.  It is not available through Windows update. You are not alone with this problem. The same problem happens to other brands of laptops owners who have the switchable graphics function.

• How can I fix my EPSONstylus DX4050 DRIVER

  How can I fix my EPSONstylus DX4050 DRIVER

  Hello

  Epson - Support
  http://www.Epson.co.UK/support

  As Epson OEM is responsible for the proper functioning of the hardware of the printer and the drivers they provide.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD.

  How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD. Sometimes, when I click on one of the disks that it opens, but the page for the drive is empty. It also says to insert a disk, sometimes when there is a disc in the drive. How this can be fixed.

  Hi vtdubu,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• Connection not lost of Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller no windows 7 64 bit does not fixed the driver version v2.4.7.29_WHQL

  Connection not lost of Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller no windows 7 64 bit does not fixed the driver version v2.4.7.29_WHQL.

  It's sad to see how Samhrutha answer to the question in this way.

  The driver does simply not good.
  The only option to address this situation in the meantime a driver that works, disable features in ' Configure, Advanced tab "on the actual card.
  Different properties exist here. Try to enable / disable some of them. It helped for me on Win7 x 64 ASUS MB.
  Kind regards
  fundutzi

• [Need help] New Alienware X 51 BSOD when using the Ports of USB 3.0

  Hello world

  Today, I received my Alienware X 51.  After you set up the system, I plugged my external hard drive USB 3.0 one of the 3 USB ports on the back of the unit.  The system immediately blue armored and closed.  I let the system restart normally, only to find he Blue filtered and restarted again.  After the third BSOD, I deleted all devices on the computer and let it restart.  It has not crashed this time.  Always plug the devices back to demonstrated that when 3 USB hard drive was plugged into the system, the PC crashed.  I am able to reproduce this constantly: hard drive goes in, system hangs.

  I stayed on the phone with Dell technical support tonight, but all they could tell me to do is find another USB 3 device for test ports with.  Since I have none is available, I'm looking at the community of users for more help.  For the record, I managed to extract the files from BSOD dump.  Here is the latest in graphical format:

  

  Anyone seen this before?  My troubleshooting course consisted by uninstalling the driver for the Renesas Electronics USB 3 hub controller supplied with the system and reinstall the drivers using a package available on the Dell (http://downloads.dell.com/Pages/Drivers/alienware-x51.html) website.  It did not work.  I also tried to format the hard drive, but the BSOD persisted.  Needless to say, I am ideas.

  The drive works fine in a USB 2 port.  Of course, I am disappointed that I am not able to use the higher speeds of USB 3 port at this time.

  Anyone seen this before?  Any suggestions on next steps?  What information can provide this help?

  Thank you!

  I am surprised that this post was did not yet a member of Dell since there is a patch to do this, apparently, I had this problem when I arrived to an external hard drive a few days ago

  Remove the current driver for Renesas installed on your Alienware then click on the link below

  http://am.Renesas.com/products/tools/introductory_evaluation_tools/starterkits_evaluation_boards/usb_3_demo_card/index.jsp

  or just click here

  • RENESAS USB3 Host pilot 30230 setup.exe

  installation, this will fix the blue screen issue

• i7 - 2600 k on Windows 7 BSOD issues

  I'm having a problem with Windows 7 and World of Warcraft.  I'm not very well filled with code it (again, I am currently in school for her), but I can build and configure computers.  Anyway, dump files do not speak to me how they could some of you so here.

  https://docs.Google.com/open?ID=0B4L7RMcYZxlBNm55S3dOREh2VVU
  https://docs.Google.com/open?ID=0B4L7RMcYZxlBclM4OG9xSXlFTmc
  https://docs.Google.com/open?ID=0B4L7RMcYZxlBM2wzVUx3bm1rWDQ
  I hope someone here can help.

  Hello

  Don't forget to check with their forums and support of the game Builder as it is possible for
  gambling problems or others to be involved which are known for their. Considers that a
  absolute must do.
   
  ------------------------------------------------------------------------------------------------------------------

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way? Heat associated
  does not always mean too much heat because it is very possible that something is too sensitive
  to normal levels of heat, even

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  =================================================================

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information on using BlueScreenView, MyEventViewer and other
  Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ==================================================================

  Results verified BlueScreenView WinDBG / DumpCHK.
  
  The Bug_Check were all GenuineIntel 124 CAUSE pointing to the processor that
  isn't a certainy. It is possible the CPU, heatsing, the compound between them or even
  drivers or other causes to participate.

  Error checking 124, {0, fffffa8010ad5028, be200000, 5110 a}
  Probably caused by: GenuineIntel
  MODULE_NAME: GenuineIntel
  Nom_image: GenuineIntel
  FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE
  BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE

  BiosVersion = 3302
  BiosReleaseDate = 15/05/2012<-- the="" bios="" is="" very="" up-to-date="" however="" there="" is="" a="">
  He is involved with ASUStek for updates, check the chipset of low level drivers and the
  leading edge and separate device drivers.
  BaseBoardManufacturer = ASUSTeK Computer Inc..
  BaseBoardProduct = SABERTOOTH P67
  BaseBoardVersion = Rev 1. XX

  1. be sure to use the steps indicate above to reinstall all the memory cards and cables. Check
  the vents to be sure, they are clear and that all fans are functioning.

  2. check the Processor heatsink of heat and the compound between them.

  3. check with ASUStek support, their drivers and documentation online and ask in their forums
  about known issues with this model.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  4 use all other methods in the troubleshooters below and those in the next message.

  ----------------------------------------------------------

  BCCode: 124 0 x 00000124

  This is usually heat related, faulty hardware, memory, or processor even if it is
  "possible" he is associated (rare) driver. To be able to remove ALL and reinstall all the cards, memory
  and cables (at both ends) - actually delete and replace - are not just tight. Ensure
  the system has proper ventilation - add a small fan blowing in the contributions. Carefully
  Inspect the card mother and other cards for damage. Pay attention to the fatal material
  error implicitly. You may need a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or system manufacturer support.

  Check the processor heat sink having and the compound between the processor and
  the causes of the heatsink that are common.

  There has been a few cases where Norton/Symantec and other antivirus/security
  programs have caused this error.

  BCCode: 124 0 x 00000124

  Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug
  verification indicates that an unrecoverable hardware error has occurred. This bug check uses the error
  data provided by the error Architecture WHEA (Windows Hardware).

  0 x 00000124<-- read="" this="">
  * 1289.html http://www.faultwire.com/solutions-fatal_error/the-System-encountered-an-uncorrectable-Hardware-Error-0x00000124-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP - HP 15-r110tu laptop not: wireles developments (DRIVER_NOT_LESS, BSOD) issues

  A few days ago my laptop has stopped to connect wireless to my modem
  
  I ran the self-services of troubleshooting, and they told me it was a driver/hardware problem
  I pinned it down to my reltekRTL8723BE adapter, but I couldn't solve this
  
  then I set up a connection wired and re-installed in the hope that it would fix
  
  now I get random BSOD errors (DRIVER_NOT_LESS etc.)
  
  I tried the tutorial about this fixation on the HP site, but after reinstalling the driver with HP recovery assistant gave no result I'm not sure how to proceed
  
  If I had to guess, I'd say the current version that I can download is not stable on my system, but that is beyond my level of skill at this point
  
  apreciate any help

  Hello again,

  Sorry for my delayed response, I got some busy days.

  So because the problem persists we will try to install the driver manually:

  Open Device Manager > go to "Card Networks" > right click on your network adapter > and select unisntall, if a menu appears you to uninstall the driver and then suggest you remove the driver do Yes aswell questioning.

  Now install the downloaded HP (right click Run as administrator.)

  Have you tried this as well?

• Server 2003 BSOD Issues...

  Hi, I need your help to help control the bsod problems...

  a vm machine (Server 2003) our customers has been keep crashing for 3 days @midnight.

  the dump file is at the following link.  (9, 24.9, 25.9, 26 minidump file.   file dump of 25.9/9/26)

  http://1drv.Ms/YgJ6QO   (onedrive)

  Thank you very much ~

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• EVGA Nvidia Geforce 8400 GS issues: [FIXED] screen and the sound does not [FIXED] virgins

  I have a HP Compaq dc5750 I just got an EVGA Nvidia Geforce 8400 GS, and I'm having a problem with it. I disassembled the computer cover and installed, replace the cover, turned on the computer and the monitor not power not on. So I decided that I had to disable the integrated graphics card (ATI Radeon Xpress 1150), then I added the card even once. Still happens... Monitor powers on without the new graphics card. My monitor is 8 years old and lacks a DVI port. I have to connect the monitor to the graphics card to make it work? I want just this card to work.

  UPDATE: white screen problem is fixed, but the sound does not (no audio installed device) even if the audio driver is installed

  Hello

  This kind of question is mainly caused by the sound card driver is not not compatible.  Contact the hardware manufacturer directly to confirm the driver is compatible or not.

  Test the issue with another pair of speakers or headphones, or you can plug the device of reading to another port to see the result.

  In the meantime, you can also see if the playback device is disabled. To do this, please check the following steps:

  1 Please, click Start-> Control Panel-> Sound.

  2. on the playback tab, right-click on the empty square and then click on "show disabled devices".

  3. check if your playback device is disabled. If so, right-click on it and click Activate.

  1. Please click Start, type services.msc and press ENTER.

  2. double-click on Windows Audio.

  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Then please click on "Stop" under "Status of Service" to stop the service.

  4. click on "Start" under "Status of Service" to start the service.

  Reinstall the audio device

  1. click on start, type Device Manager, click on Device Manager to open it.

  2. expand ' audio, video and game controllers ".

  3. right click on your audio device, and then click on uninstall.

  4. check "delete the driver for this device".

  5. click on OK.

  6. after that, restart the computer, the device and the driver must be reinstalled automatically.

  Please check if the problem can be solved now.

  If the problem persists, please install the latest driver of sound card on the manufacturer.

  I found the problem... once again: I had to go to the BIOS and enable Audio integrated. My audio integrated uses Realtek High Definition Audio instead of Nvidia High Definition Audio.

• BSOD issues after update 8.1

  My computer has no problems with Windows 8.0.  After the Windows 8.1 update, the system will BSOD crash leave once all the hours to once every few minutes.  I didn't notice all patterns on the block;. It is not obviously related to the execution of any piece of software. Often, the error message is different from the previous.  Some I've seen include:

  • Structure criticizes Corruption
  • Kernel security check failed
  • Memory management
  • IPF in nonpaged area
  • Unhandled Thread Exception system
  • Attempt to write to Readonly memory

  The research I've done has led to assume that it is a driver issue, but I am not sure. Today, the computer has to reset several times without warning and without displaying any error messages at all.  How can I get to the bottom of what's going on and solve the problem?  Any help would be greatly appreciated. Thank you!

  Thanks for the information.

  Your RAM is faulty and must be replaced.

  Kind regards

  Patrick

• Rio's issue fixed

  Just a general question about gaps in my knowledge. We used a fixed point in the Rio, which is fine. If I do some basic math, say the multiplication of two numbers in the format 20,4 IE integer size 4 and 16 bits after the decimal point and then I get a number of 40.8. Should I re - convert this back to 20.4 or can I leave it and just continue. LabVIEW will make space for all the variable solutions or should I do it manually? I can see if I'm doing a lot of multiplies and adds the numbers get bigger and bigger.

  Also, I saw an article where the programmer made the move to the right and chipping itself but the fxp block for me? for example I multiply two 8.4 numbers and get a 16.8 who do I shift to the right and re-scale. What is recommended for the addition, division, and multiplication.

  Thank you

  I don't know what you're asking here.  What do you mean by, "LabVIEW Will make way for all the different solutions?"  By providing the result as a value of 40.8, LabVIEW is to ensure that there is enough space for any results.  You can continue with this value, but afterwards, you should it retract.  With number requires more bits more FPGA resources, and there is a maximum number of bits that can be used to store a value.  It is up to you to know how you want to handle this scaling.  Sometimes, it is more important to preserve the most significant bits and lose resolution.  In other cases, you can know in advance the normal range of entries and can accept the overflow for unusual entries in order to maintain the resolution for typical values.  There is no specific best practice.  See warnings and recommendations for the use of fixed point numbers and.

• Issue fixed

  I have a simple test program that is a digital FIR filter. I'm simulate for Rio indeed, as I have similar problems there.

  as it is, the program in the picture below actually works well. Should null to a sample rate of 1/4 what it does. However, if I replace the table of fixed point zeros

  with am initialize the function array (see the diagram below), and then it breaks down. The reason I want the matrix of initialization, is that it could be quite a large table - say 400 values inside and I don't want a load of hugh of fixed point zeros there. I changed the format of the initialization of zero to fixed point, but it still does not work.

  Thank you

  FXP values in the table are of different type of FXP (32-bit, 16-bit length of whole word) than where initialize you the array (1.bit length), so the results will certainly vary. You must ensure that the constant is of the desired type.

  The constant you use to initialize the shift register is also 1 bit, probably not enough.

  Why do you not use autoindexing on the coefficient table?

• I've corrected the 10 Feb Windows update BSOD issue. What to do next?

  Like many others my infographic died with a BSOD after the windows update Feb10th. Returning the suggested KB977165 had no effect, but fortunately after returning all the updates, my computer is back to life.
  I have now a computer with windows update disabled with an update waiting that I suspect is causing the BSOD again if I turn on updates.
  The various forums etc I found will tell you how to recover your computer on but none that I have found tell me if I can go back to windows update or how carefully remove any update caused the BSOD.
  I haven't tried the "no support for Windows Update problems" for an answer and gave with an automated response telling me to try here.
  Can someone please point me to a 'next steps' to recover completely from this?

  I've heard reports of infected, media files cj. The two movies and songs that have been downloaded through Limewire.  If I hear anything else about it, I will be sure to post it here. All the protection we use still depends on who is using the keyboard or mouse click.

  Suggest that you scan the system with Malwarebytes anti-malware , too.  Download the free version, install and allow update when installed.
  Then click on the button scan and use the default quick scan setting. Once the scan is complete click on the button to display the results.
  If sure all detected object is checked and then click on the button select Remove.
  If nothing is detected, I would start the system into safe mode and do a Full scan, too. It will take time to finish but worth it.

  One way that you would be able to be almost certain to 100% that you have detected and deleted all the bad creatures is to shoot on the hard drive, install it as a slave on another system and then scan the HD active.
  Or you can create a BartsPE or Linux boot cd and the scanner without having to shoot HD.

  Anyway is not elegant, to say the least, and not give the same level of confidence you would have with (ugh) formatting and reinstalling.
  MowGreen Services consumer safety update