i7 - 2600 k on Windows 7 BSOD issues

Similar Questions

• I've corrected the 10 Feb Windows update BSOD issue. What to do next?

  Like many others my infographic died with a BSOD after the windows update Feb10th. Returning the suggested KB977165 had no effect, but fortunately after returning all the updates, my computer is back to life.
  I have now a computer with windows update disabled with an update waiting that I suspect is causing the BSOD again if I turn on updates.
  The various forums etc I found will tell you how to recover your computer on but none that I have found tell me if I can go back to windows update or how carefully remove any update caused the BSOD.
  I haven't tried the "no support for Windows Update problems" for an answer and gave with an automated response telling me to try here.
  Can someone please point me to a 'next steps' to recover completely from this?

  I've heard reports of infected, media files cj. The two movies and songs that have been downloaded through Limewire.  If I hear anything else about it, I will be sure to post it here. All the protection we use still depends on who is using the keyboard or mouse click.

  Suggest that you scan the system with Malwarebytes anti-malware , too.  Download the free version, install and allow update when installed.
  Then click on the button scan and use the default quick scan setting. Once the scan is complete click on the button to display the results.
  If sure all detected object is checked and then click on the button select Remove.
  If nothing is detected, I would start the system into safe mode and do a Full scan, too. It will take time to finish but worth it.

  One way that you would be able to be almost certain to 100% that you have detected and deleted all the bad creatures is to shoot on the hard drive, install it as a slave on another system and then scan the HD active.
  Or you can create a BartsPE or Linux boot cd and the scanner without having to shoot HD.

  Anyway is not elegant, to say the least, and not give the same level of confidence you would have with (ugh) formatting and reinstalling.
  MowGreen Services consumer safety update

• BSOD issues before and after a clean windows 7 installed

  Hey, I get BSOD issues after a clean install of windows and I also replaced my RAM with sticks again because I thought that my memory was damaged for some reason any. Is it possible that my hard drive is bad?

  Here's my minidump file:

  https://www.dropbox.com/s/paqnfyylg5yw2bw/012416-20420-01.dmp?DL=0

  Hello

  Since you did a clean install this strongly points to material with only one
  small chance, it is the BIOS, chipset drivers or others. Could be the hard drive, the
  wiring for the hard drive or other hardware.

  BugCheck F4, {3, fffffa800df48060, fffffa800df48340, fffff80002b97f40}

  ETW unavailable minidump
  Probably caused by: ntkrnlmp.exe (nt! PspCatchCriticalBreak + 92)

  Ntkrnlmp.exe is a component of Windows which means than anything else he has led astray.

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  ---------------------------------------------------------------------------------------------

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  ========================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) in fact
  delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
  memory and possibly check the connection/contacts on the hard drive. Memory could
  be the problem, so if you have more than 1 stick swap them in and out to see if the
  problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
  have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other software to control.

  Also check the wiring on the hard drive.

  =========================================================

  BCCode: F4 0x000000F4<-- read="" this="">

  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION
  https://msdn.Microsoft.com/en-us/library/ff560372%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  =========================================================

  These can help:

  Remove ALL power. Then carefully remove the cards one time and put them
  back in their locations. Do the same for memory, then the cables. A coward or
  corroded connection point may cause strange problems.

  Reinstall the expansion cards
  http://pcsupport.about.com/od/fixtheproblem/SS/Reseat-excards.htm

  How to reinstall a desktop memory Module
  http://pcsupport.about.com/od/fixtheproblem/SS/reseat_memory.htm

  The relocation of the supply and internal data cables
  http://pcsupport.about.com/od/fixtheproblem/SS/Reseat-power-cables-data-cables.htm

  Reinstalling your RAM, graphics card and hard drive
  http://www.YouTube.com/watch?v=DLxNPBQBfT8

  ---------------------------------------------------------------------------------------

  You may need to check with the mother system/card manufacturer or a computer
  Shop (that makes its own service in the workshop).

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Migration to new hardware for Windows 7 professional issues

  I would like to copy a copy OEM licensed Windows 7 Pro 64 bit on a new computer.  I understand that the OEM license is linked to the original machine.  I want to just clone the old machine to a new machine - who has updated the hardware - and then ask the license OEM Windows 7 Pro 64 bits provided with the new machine to the cloned OS.  Simple operation - licences should be covered, and then I don't have to reinstall and reconfigure all my apps.

  It is, gets Windows a BSOD, probably because the drivers installed are not compatible, starting with the motherboard chipset and video card, etc.  I need Windows for a new analysis of material to get new material.  I tried to use devcon rescan from the cmd line, but it comes back very quickly and does not seem to make any changes to the drivers installed.

  Any help appreciated.

  Thank you!

  Bill

  See this tutorial.  A program such as Acronis True image can also do that.

  http://www.SevenForums.com/tutorials/135077-Windows-7-installation-transfer-new-computer.html

• Windows live mail issue when my wife deleted our email, we lost our files and folders

  Windows live mail issue when my wife deleted our email, we lost our files and folders

  Thank you for visiting the Microsoft answers community site.

  The question you have posted is related to Windows Live Mail and would be better suited in the Windows Live Solution Center.

  Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/forums.aspx?ProductID=15

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 BSOD and receiver code error BCCode: 9f

  Original title: Windows 7 BSOD
   
  Hey guys I just built my first system and it was a lot. I used the trial version of Windows 8 64-bit for about a week I had to wait for my windows 7 to arrive. Windows 8 everything went fine with no problems. Then I installed windows 7 and ever since then, every time I leave my system alone for an hour or two, I'll be back to see that it crashed because of this error message below. Can I use my computer all day, video, editing, etc, but when I close all and leave for an hour, I'll be back to see that I have broke down. I try to leave it overnight to install my steam on games but crashes after about an hour.
  Any help would be great.
  Error message:
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  More information about the problem:
  BCCode: 9f
  BCP1: 0000000000000003
  BCP2: FFFFFA80070A4A10
  BCP3: FFFFF800047C43D8
  BCP4: FFFFFA80097AB010
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1
  Files helping to describe the problem:
  C:\Windows\Minidump\122112-20077-01.dmp
  C:\Users\Ryan\AppData\Local\Temp\WER-58203-0.SysData.XML
  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt
  Data sheet:
  Intel i5 3570 k @3.4 ghz
  Cooler Master Hyper 212 Evo
  Z77 UD5H Gigabyte motherboard
  EVGA Gtx 670 FTW
  Corsair Vengeance 8 GB 1600
  Corsair HX 750w PSU
  Seagate Barracuda 7200 rpm 1 TB
  Cooler Master Storm Stryker
  Edit: I thought it might have something to do with memory, so I ran Memtest 86 + 4 hours and had no error: P

  Hello

  Thanks for posting your query in Microsoft Community!

  According to the description, you are receiving BSOD (Blue Screen of Death) and receive the error code BCCode: 9f.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

  Did you do changes on the computer before the show?

  I suggest to follow the steps of the items listed below and check if it works.

  Error message when you try to resume a Windows 7 or Windows Server 2008 R2 to Hibernate computer-based: "Stop 0x0000009F"

  http://support.Microsoft.com/kb/977186

   

  Stop error when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby or into hibernation, or when you restart the computer: "0x9F".

  http://support.Microsoft.com/kb/975599

   

  stop "0x0000009F" error message when a computer enters and fate of putting into hibernation in Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/981848

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Works Suite 2003 will not install on windows 7. compatibility issue?

  Original title: Works Suite 2003 will not install on windows 7. compatibility issue? If so how to solve it.

  I tried to install Works Suite 2003 on my laptop using Windows 7, 64 bit. He has a problem loading and wants to perform a clean boot. The boot minimal instructions do not apply to windows 7, so how can I get this Microsoft program on this computer running a Microsoft OS?

  Hello

  ·        Which edition of Windows 7 you are using?

  Works Suite 2003 is not compatible with Windows 7. Click on the link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=works%20Suite%202003%20&OS=64-bit

  You can try the byAndre.Ziegler suggested in his previous post suggestions, but note that XP mode will only work if you have Windows 7 Professional / Enterprise / ultimate.

  Apart from this, you can install the program in compatibility mode and check if it works or not.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  See the article mentioned below for the minimum system requirements for the continuation of the work 2003.

  Works Suite 2003: Minimum system requirements for the Installation of Works Suite 2003

  http://support.Microsoft.com/kb/331105

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista - MSE updates OK if via Windows updates &#62; BSOD?

  Hi yesterday my Vista very reliable (32 bit Home Premium SP2 on a Toshiba Satellite Pro L300d 4 GB of RAM) Blue installation proposed - this never happened before in 2 years of use!

  I use MSE for about a week or two, & find it fine - in fact my first full scan has detected a Trojan horse that the previous program never seen or reported.
  The BSOD pending symptoms that start (just before logon is displayed), the ORB does not appear either or if this is the case there is no sound. Then the connection at the time where MSE starts to load a lock-up followed the BSOD (which is just a big bar at the bottom of the screen).
  I can retrieve using the last point of restoration (which was the installation of a definition of ESM by Windows Update). This morning, I applied a definition through MSE & everything was OK. This definition appeared in WU previously but I had not updated via WU. I applied it through MSE & everything was OK.
  Anyone has any ideas as to why this is happening?
  TIA

  Hi-brush,

  Thank you for following up on that.

  I'm glad that you were able to get up and running.

  Let us know if you have any other questions on this or other issues.

  Best regards

  Matthew_Ha

• Alienware 17 R3 - BSOD ISSUE/FIX - killer E2400 Ethernet Driver / Version: 1.1.56.1236_A01

  This question/correction is in what regards the Alienware 17 R3 model. It has not been tested and confirmed for other models! ***

  The following information is presented to assist you (and DELL) with a DRIVER from DELL problem that causes WINDOWS 10 fixing to the accident of BSOD & MAKE YOUR SYSTEM unable to boot in windows desktop!

  I have listed the factors that are causing the problem and then follow up with what (I have laboriously have troubleshooted for over a week now) pilots are currently working without problem. I hope that this helps you turn it back on, and if you have a message of the moment and let me know! ((DELL-S'IL VOUS PLAÎT PASSER CE LONG À N'IMPORTE QUEL DÉPARTEMENT DE PRESSE NOUVEAUX PILOTES!)) PLEASE PATCH/FIX!))

  Device Manager > network adapters

  Bluetooth (personal area network) device / driver Version: 10.0.10586.0 (21/06/2006)
  (Heading RFCOMM Protocol TDI) Bluetooth device / driver Version: 10.0.10586.0 (21/06/2006)
  Killer e2400 Gigabit Ethernet Controller / Driver Version: 9.0.0.5 (27/04/2015)
  Killer Wireless-n | a | AC 1535 Wireless Network Adapter / Driver Version: 12.0.0.137 (23/08/2015)
  ***************************************************************************

  Control Panel > program and features

  Suite of killer Network Manager / driver Version: 1.1.54.1220
  Killer wireless drivers / Driver Version: 1.1.56.1236
  Qualcomm Atheros Bluetooth 61 x 4 Suite (64) / driver Version: 12.0.0.102
  ***************************************************************************

  Latest drivers available from dell.com (Alienware 17 R3)

  Killer Wireless-AC pilot 1535 / Version: 1.1.56.1236_A01
  ((Nom de fichier/.exe: Network_Driver_2WDXK_WN64_1.1.56.1236_A01))

  Killer E2400 Ethernet Driver / Version: 1.1.56.1236_A01
  ((Nom de fichier/.exe: Network_Driver_C95MK_WN64_1.1.56.1236_A01))

  Driver Bluetooth Killer Wireless-TA 1535 / Version: 10.0.0.102_A00
  ((Nom de fichier/.exe: Communications_Driver_PJ4XH_WN64_10.0.0.102_A00))
  ***************************************************************************

  When you try to install the Killer Ethernet Driver E2400 / Version: 1.1.56.1236_A01, the following problems occur:

  -ATTENTION ERROR/InstallShield DLL custom Action
  [Exclamation point in a yellow triangle] "Cannot find the entry point of the function"TweakLOMPerformance", make sure that it is implemented. .

  -L'installation will not continue or complete until you click a button 'OK' for the above warning ERROR

  -Once you click on 'OK', the installation will be complete and inform you that your system needs to reboot. At this point, 1 of 2 things will happen
  -1. The system will be blue crash screen immediately when the complete installation
  -2. The system will be blue crash screen after reboot, at the stage of account log-in/enter windows password

  -There are three possibilities BSOD:
  1 BAD_POOL_HEADER (most common result)
  2 KERNEL_SECURITY_CHECK_FAILURE
  3 IRQL_NOT_LESS_OR_EQUAL

  -Once the BSOD occurs, you will not be able to boot in Windows 10. The system will crash, restart, crash, reboot, and then win 10 implements its program of recovery/repair of the system. If you have a system restore, then you can reverse this pilot plant successfully, which will allow you once more in Win 10 w / no another BSOD. If you do NOT restore the system save point, your options become more extreme: 1. restore/Reset before installing the affected driver listed above; 2 restore/reset; 3 NOTE: Starting Windows hotfix fails to solve the problem

  Variables

  On an another Alienware 17 R3 (exactly the same card/construction material), installation and the following drivers work correctly without BSOD:

  Device Manager > network adapters

  Bluetooth (personal area network) device / driver Version: 10.0.10586.0 (21/06/2006)
  (Heading RFCOMM Protocol TDI) Bluetooth device / driver Version: 10.0.10586.0 (21/06/2006)
  Killer e2400 Gigabit Ethernet Controller / Driver Version: 9.0.0.8 (28/07/2015))! ANOTHER DRIVER VERSION VS. Above!
  Killer Wireless-n | a | AC 1535 Wireless Network Adapter / Driver Version: 4.0.1.137 (03/09/2015). ANOTHER DRIVER VERSION VS. Above!
  ***************************************************************************

  Control Panel > program and features

  Suite of killer Network Manager / driver Version: 1.1.56.1236! NEW VERSION of DRIVER!
  !!! NOT INSTALLED/NOW! (Tueur sans fil pilotes/Driver Version: 1.1.56.1236))
  Qualcomm Atheros Bluetooth 61 x 4 Suite (64) / driver Version: 12.0.0.102
  ***************************************************************************

  TCOLE334:
  Thanks for the solid recommendation; your post on the removal of the Dell printer provided Killer drivers (wireless network and ethernet), and then update directly from the site of the murderer himself worked like a charm.

  So, for anyone who has an Alienware 17 R3, or face a similar problem with BSOD by Killer drivers, I can confirm the work of solution of this TCOLE334 and fixed my issues surrounding network causing BSOD drivers.

  Now if only we can get our BSOD problems resolved with the Dell SupportAssist program. Starting from 04/03/2016, I'm waiting on an update of PC Doctor directly (I have been in contact with them for the last month now and work with them to try to resolve this breaker program.) I emailed plant minidumps, memory.dmp, newspapers, etc. We'll see. Patience is a virtue!)

• BSOD issues after update 8.1

  My computer has no problems with Windows 8.0.  After the Windows 8.1 update, the system will BSOD crash leave once all the hours to once every few minutes.  I didn't notice all patterns on the block;. It is not obviously related to the execution of any piece of software. Often, the error message is different from the previous.  Some I've seen include:

  • Structure criticizes Corruption
  • Kernel security check failed
  • Memory management
  • IPF in nonpaged area
  • Unhandled Thread Exception system
  • Attempt to write to Readonly memory

  The research I've done has led to assume that it is a driver issue, but I am not sure. Today, the computer has to reset several times without warning and without displaying any error messages at all.  How can I get to the bottom of what's going on and solve the problem?  Any help would be greatly appreciated. Thank you!

  Thanks for the information.

  Your RAM is faulty and must be replaced.

  Kind regards

  Patrick

• Windows 8 BSOD due to CORE 41

  I had 3 blue screens in the last 24 hours. There is no way that this is something that I downloaded because I did not download anything less than last month.  The issue began last night (29/01/2014 right before midnight).  I have no idea why he got the BSOD because I just played on my Playstation with the laptop, just sitting there.  All of a sudden, the error message came up saying that the PC has encountered a problem and needs to restart. I looked in the case log and error that happened that were all the same, core 41, apparently, it has to do with the power of the laptop? Also, I never had this older problem on my laptop which is running windows 7 pro, just on windows 8.  I looked online for a fix or why it can happen, but nothing seemed to be my problem, or a fix. Here's the breakdown of what has happened last night until about 20 minutes before this post:

  -turned on pc about 10:30
  -I went to play playstation
  -on 1.5hrs later, BSOD
  -rebooted pc
  -I went to bed and decided to download digital copies of all the movies of Fast and Furious from Amazon
  -to 06:20, BSOD aroun
  -tour of pc at 07:45
  -Turn on pc around 18:00
  -at 19:36, BSOD
  Like I said all the BSODS were due to the 41 core error and I have never had this problem since last year when I bought the laptop or my mobile older which has windows 7 pro.
  The pc that I use now, the same one that had errors, it's an ACER Aspire, V3 - 771 G with windows 8, intel core i7, 8 GB of Ram
  Yet, I don't know why this problem continues to be, especially of 3 times in 24 hours WTF!
  There is a known issue with the Logmein driver dated 24/01/2014 causing BSOD with error code 0 x 44 and the titile of "MULTIPLE-IRP-END-APPLICATIONS.

  We are advised to remove or to contact the developer of a patch, update, work around, etc.

  Failing that I would return to an older version until a pilot no bug is released.

  LogMeIn Hamachi virtual Miniport driver. Driver update site: https://secure.logmein.com/products/ios/

• Windows 8 BSOD caused by ntoskrnl.exe

  Hello.

  I get a lot of the dreaded BSOD lately.
  From the beginning I thought that it's nvidia drivers. Update of those fixed everything except a BSOD I get.
  Now I get the same BSOD, and it is caused by ntoskrnl.exe and playback memory problems.
  I've been all around you are looking for assistance and use of memtest86 without result.
  The Msinfo32 and .dmp files are located here: DMP.zip 
  Anyone have any idea what may be causing this?
  I couldn't find the RAM that I use in the compatibility table for the motherboard. So that's what I think may cause the problem.
  Any help is greatly appreciated.
  Kind regards
  Arve

  Hi Arve,

  All attached files of the DMP are the bug check IRQL_NOT_LESS_OR_EQUAL (a) .

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high. The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If we look at the call stack:
  
  STACK_TEXT:
  "fffff880 '0335caf0 fffff880' 06a4d817: fffff880 00000000' fffffa80 ' 00000008 fffffa80 ' 12fdbe10 00000005' 00001f80: nt! KeSetEvent + 0x2ad
  fffff880 '0335cb60 00000000 fffff880': fffffa80'00000008 fffffa80 '12fdbe10 00000005' 00001f80 fffffa80' 1458a6a0: MBfilt64+ 0 x 1817
  fffff880'0335cb68 fffffa80'00000008: fffffa80 '12fdbe10 00000005' 00001f80 fffffa80 '1458a6a0 fffff800' 9bc62d4c: 00000000' 0xfffff880
  fffff880 '0335cb70 fffffa80' 12fdbe10: 00000005' 00001f80 fffffa80'1458a6a0 fffff800 '9bc62d4c fffffa80' 1458a6a0: 0xfffffa80'00000008
  fffff880 '0335cb78 00000005' 00001f80: fffffa80 ' 1458a6a0 fffff800 '9bc62d4c fffffa80' 1458a6a0 fffffa80 ' 1458a6a0: 0xfffffa80'12fdbe10
  fffff880 '0335cb80 fffffa80' 1458a6a0: fffff800 ' 9bc62d4c fffffa80 '1458a6a0 fffffa80' 1458a6a0 fffffa80 ' 12fdbe10: 0 x 5 ' 00001f80
  fffff880 '0335cb88 fffff800' 9bc62d4c: fffffa80 ' 1458a6a0 fffffa80 '1458a6a0 fffffa80' 12fdbe10 fffff880 ' 02fc9f00: 0xfffffa80'1458a6a0
  fffff880 '0335cb90 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! ViPendingCompleteAfterWait + 0xc4

  Cannot load the image MBfilt64.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for MBfilt64.sys
  ERROR: Module load completed but symbols can be loaded for MBfilt64.sys
  Probably caused by: MBfilt64.sys (MBfilt64 + 1817)

  ^^
  Driver Realtek HiDefinition Audio (referred to as Creative Audio Driver file).

  If we run a lmvm on your:

  4: kd > lmvm MBfilt64
  start end module name
  fffff880 '06a4c000 fffff880' 06a5a000 MBfilt64 T (no symbol)
  Loaded symbol image file: MBfilt64.sys
  Image path: MBfilt64.sys
  Image name: MBfilt64.sys
  Timestamp: Thu Aug 30 23:40:32 2009 (4A7267B0)

  ^^, Yours is dated 2009 ~ The most recent is AFAIK as early as September 2013, via - Realtek site

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  To update this driver as soon as POSSIBLE.

  -----------------------------------------------------------

  In addition, to provide peace of mind regarding your request of RAM. If you receive a card mother and they have a list of the RAM compatible in the manual, etc., this is called a QVL (qualified suppliers list). It is simply a list of RAM which has been tested internally and is PROVING to be quite compatible 100%. If the RAM is not on the list, it is not by all means, implies that the RAM will be inconsistent and cause problems. Actually today is very rare. Your RAM doesn't seem to be the issue at all in these accidents.

  Kind regards

  Patrick

• controls in title bar of window missing in windows 10 (known issue)

  I have problems with the controls of 3 (minimize, maximize, close) window on the top right, since the upgrade to windows 10. They are no longer at all. Everyone knows this? is this a known issue?

  It was in fact 40 beta. I downgraded to 38.1 release and it seems to work now.

• Satellite A660-1CJ - 8.1 Windows crashes - BSOD bridge.sys

  Hello

  I have a Satelite A660-1CJ, running Windows 8.1 and he already broke 5 times with a BSOD:
  DRIVER_IRQL_NOT_LESS_OR_EQUAL (bridge.sys)

  What can I do?

  Hello

  It seems that the bridge.sys is causing the BSOD.
  Bridge.sys is a Windows system component.

  Toshiba says that the Windows 8.1 is not supported on Satellite A660 series.
  What does that mean?
  This means that Windows 8.1 drivers are not released by Toshiba.

  I assume that you have installed drivers in your own hand and probably one of the drivers causing the BSOD.

• HP Envy TS m6-k015dx: HP Envy Bluetooth Windows 10 connectivity issues

  I've upgraded to Windows 10 recently (even if she will be as a downgrade) and have experienced problems with the wireless and bluetooth connectivity. specifically, I can't keep a solid connection on any wireless network while my bluetooth is turned on.

  He'll keep disconnection, and when he says that I have a stable connection I don't always get all internet.  He said that there is a problem of DNS probe.

  As well as wireless issue while bluetooth is turned on, I also had problems with the connection to an audio device via bluetooth.  I recently received Coulax QX8 bluetooth headphones and they connect on my phone (iPhone 6s), but when I try and connect to it on my laptop, it is not figure it out.  I activated the devices to the discovery of the notebook in the settings, but I still don't see it appear.  Help, please.

  And before all the messages about drivers, YES, I update my bluetooth and Wifi drivers, through both the HP Support help and directly by the driver and the Device Manager.

  Current drivers

  Bluetooth: Intel Wireless Bluetooth, version 18.1.1525.1445

  Wireless: Intel Centrino Wireless-N 2230, version 15.18.0.1

  Please let me know if bluetooth or wireless number, or if it's just with Windows 10 on this product!

  Hello @sambody47,

  Thanks for the quick response!

  Keep your eyes on Windows Update.  If ever the drivers become available for your product, it will be pushed through this program.  You can check this site for the drivers as well:

  HP products - where to find Windows 10 drivers and software for my model?

  Because Windows 10 drivers are not yet available for your product, on the site of HP; You can try to use the solutions on this site to work around the problem.  Please let me know the results:

  How to: install and update drivers in Windows 10

  If you're still having problems, try to use back to a previous generation option, in your system settings: HP Notebook PC - upgrade to Windows 10

  Remember that this feature is available only for 28 days, after the installation of Windows 10.  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!