Align the cell content in the classic SQL report top

Similar Questions

• Change the line color of the standard SQL report

  Hello
  
  I'm trying to follow this post to change the color of a line in the APEX SQL report. Change the color of line - report SQL Oracle APEX
  
  It is a little outdated and trying to figure out how to get to this page: http://img7.imageshack.us/img7/4782/columntemplate.jpg 4.2 APEX where I can put under condition of background color.
  
  
  I use Theme 13 (inheritance) and make a copy of the report area. Published, but could not find an equivalent section of this screenshot of the apex 3.1.
  
  Any help appreciated.

  William Wallace says:

  I'm trying to follow this post to change the color of a line in the APEX SQL report. Change the color of line - report SQL Oracle APEX

  It is a little outdated and trying to figure out how to get to this page: http://img7.imageshack.us/img7/4782/columntemplate.jpg 4.2 APEX where I can put under condition of background color.

  I use the theme 13 (legacy)

  Ugh.

  and make a copy of the report area. Published, but could not find an equivalent section of this screenshot of the apex 3.1.

  This suggests that you look at the definition of region page, or even simply the definition of region model. What you need here is a copy of the report model.

  1. go in Home > Application Builder > Application > shared components > models.

  2. Select theme 13 theme filter, the Filter Type reports and click OK.

  3. create a copy of the Standard report model by using the icon copy in the list.

  4. Select the new report template and edit it as shown in the thread linked to above, paying special attention to the content of the second post. (It is of generic column template definition page that contains the section in the screenshot).

• How to adjust column widths individual classic SQL report

  Hello

  I use Oracle APEX v4.2 with IE8 browser and basically tries to adjust widths of individual columns in my classic SQL report. Basically, I have three columns I want to spacing, so that the width of the entire region for the report is used, but am not sure how to proceed.

  I drilled in individual columns and specified the column widths as the element, but in vain.

  Would appreciate help on how to do this for each column and hope that I do not need to change the model of report (if possible).

  Thank you.

  Tony.

  Tony F. says:

  I use Oracle APEX v4.2 with IE8 browser and basically tries to adjust widths of individual columns in my classic SQL report. Basically, I have three columns I want to spacing, so that the width of the entire region for the report is used, but am not sure how to proceed.

  There is an element of uncertainty in what we suggest as well, because you have not specified the theme and the report of model that is used. This information is required for any question of formatting or the visual layout.

  I drilled in individual columns and specified the column widths as the element, but in vain.

  Report in some themes templates may be missing in the #COLUMN_WIDTH substitution string # required for use of the declarative column widths, as shown here: Re: width of column in reports

  I don't know why it would be missing from a theme of so-called "modern" (perhaps the lack of documentation affects even the Oracle theme designers), but you can add it to the models listed in this thread.

  Width of the element applies only to controls on a form in a table.

  Would appreciate help on how to do this for each column and hope that I do not need to change the model of report (if possible).

  This can be done using selectors CSS attribute (for the themes of quirks mode non-traditional, because you are using a legacy version of IE). Add a style sheet in CSS Inline property page:

  #ALIAS,
  td[headers="ALIAS"] {
  width: 40%;
  }
  

  where the ALIAS value in the attribute selector matches the required column alias, and the width property specifies the column dimension required and the units.

  Note that the percentage widths will be compared to the width of the report table. Therefore, it may be necessary to also specify widths (100%) for the table of report and its components. Exactly how is based on the report, the region and the page templates and theme used, information that was not provided.

• The classic XP Mode top bar doesn't turn blue when the window selected

  See the question. Incidentally, it is possible to up the star selected a color other than yellow?

  Hmmm, and your windows theme is classic or something else? Blue is a feature of the classic windows theme.

  Yellow stars. See http://forums.mozillazine.org/viewtopic.php?f=28 & t = 2031971

• At the top of the PAGE Sql report SQL_ID

  Hello

  on 5.6.4 we generate report TOP SQL for guarded Oracle DB. But SQL_ID isn't in them. Any way to make them?

  Thank you.

  I don't see anything exactly like 'SQL_ID"in properties DBO_Top_Sql (attached).

  Have you seen this property in a Foglight dashboard? If so, you should be able to add to the DBO_Top_Sql report.

  Kind regards

  Brian Wheeldon

• Search bar in the classic report

  How to add a search bar in the apex sql report?
  
  Sanjay

  Hello

  Create a TextField and a button on your sql report.
  a process of writing on 'Send' to search for the data in your report about what you put in this textfield element.
  call this process of this button.

  hope this will help you.

  Thank you
  Jitu

• SQL report

  How can I make the Apex SQL report that follows (two versions)?

  Thank you very much.

  Participation of students in the meetings.

  Students = Aris, Maria

  Meetings = 1, 2, 3 (2014-1-5, 15-1-2014 and 2014-1-25 respectively).

  Participation = 0/1 (absent/present).

  __________________________________________

  Report version 1

  Meeting 1 meeting 2 3

  1 1 ARIS 0

  Maria 1 0 0

  __________________________________________

  Report version 2

  Meeting 1 meeting 2 3

  2014 1-5 15-1-2014 2014-1-25

  1 1 ARIS 0

  Maria 1 0 0

  __________________________________________

  Here's the diagram:

  create table students

  (

  primary key not null ID number,

  name varchar2 (80)

  );

  create table meeting

  (

  primary key not null ID number,

  date of meeting_date

  );

  create the table student_meeting

  (

  primary key not null ID number,

  student_id number of non-null reference student (id),

  meeting_id number of non-null reference meeting (id),

  number of presences,

  check (presence in (0, 1))

  );

  insert into values student (11, "Aris");

  insert into values student (12, 'Maria');

  Insert in the encounter of the values (1, '' 2014-01-05);

  insert into values of meeting (date 2, '' 2014-01-15).

  Insert in meeting values (3, '' 2014-01-25).

  insert into student_meeting values (101, 11, 1, 1);

  insert into student_meeting values (102, 11, 2, 1);

  insert into student_meeting values (103, 11, 3, 0);

  insert into student_meeting values (104, 12, 1, 1);

  insert into student_meeting values (105, 12, 2, 0);

  insert into student_meeting values (106, 12, 3, 0);

  commit;

  What you want is called a matrix or pivot table dynamic PivotTable report... Take a look at this link RPF (as long as you eon ar 11g for a database...) for example: Vishal blog: methods of creating matrix in Oracle APEX report

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• Dynamic SQL report on Oracle apex4.0

  Hello world
  
  I have two reports on a single page. One is the Interactive and another report. Sql based on the selection of the line (using the check box) in the interactive report, sql report should display the selected columns.
  
  Note: the report must be loaded every time that a line is selected and without subjecting it to a button
  
  Can someone please suggest?
  
  I'm using oracle Apex4.0
  
  Concerning
  REDA

  I think that you are storing the values in the boxes. For example, your interactive report query looks like:

  SELECT '"AS CHECKBOX, T.*.
  OF UNE_TABLE T

  and in 'Attributes of report', the CHECKBOX is displayed under "Standard report column.

  * 1 a control list hidden input champ.*
  It will store a selected values of list of checkboxes. If it is long enough, for example. 1000.
  Let's say that the entry name is: P000_X_CHECK_LIST

  * 2. Create a dynamic Action *.
  This dynamic action is supposed to fill the P000_X_CHECK_LIST with a list of values, separated by ': ' character.
  These values will be an entry for the SQL report.

  Name: updated checklist
  Event: change
  Selection type: jQuery Selector
  jQuery Selector: input: checkbox

  Action: Set

  Set type: Expression JavaScript

  function check_list() {}
  var n = "";
  $(":checked").each (function () {}
  n = n + (n === « » ? ("': ': ') + $(this) .val ();
  })
  return n;
  }
  check_list();

  Selection type: item (s) - P000_X_CHECK_LIST

  * 3. Set the query "SQL report" with this magic formula *.

  AND SEARCHED_ITEM IN)
  SELECT the item
  FROM (SELECT REGEXP_SUBSTR (str, ' [^:] +', 1, LEVEL) point)
  FROM (SELECT: P000_X_CHECK_LIST str)
  THE DOUBLE)
  CONNECT BY LEVEL<= length="" (regexp_replace="" (str,="" '[^:]+'))="" +="">
  )

  for example:

  SELECT O.*
  OF SOME_OTHER_TABLE O
  WHERE SEARCHED_ITEM IN)
  SELECT the item
  FROM (SELECT REGEXP_SUBSTR (str, ' [^:] +', 1, LEVEL) point)
  FROM (SELECT *: P000_X_CHECK_LIST * str)
  THE DOUBLE)
  CONNECT BY LEVEL<= length="" (regexp_replace="" (str,="" '[^:]+'))="" +="">
  )

  * 4. Adjust the dynamic Action: *.

  Advanced: Event scope: 'live '.

  * 5. Add real action more dynamic Action: *.
  Action: update
  Selection type: region
  Region: The region of the "SQL report.

  Volia!

  Best regards
  Krzysztof

• align the cells with shared values

  3.6.1 the numbers

  I would like to compare two columns and align the cells, if they are equal. Ideally, I would like to include the adjacent cells in the second column in the alignment.

  Example:

  Run the formula (if possible) to format the following text:

  

  As follows:

  

  Hi cnickflight,

  Easy to do by transferring the data to another table.

  

  Table 1 contains the original data. I reduced the names of fruits to three letter codes to reduce type them, but this does not change the process.

  Column A of table 2 contains a formula that copies the existing data in column A of table 1 and insert null strings when there is no data in the table 1.

  The formula is entered in cell A2 and filled down.

  Table 2::A2: = IF (ROW () −1 > COUNTA (table 1::A),"', SHIFT (table 1::$A$1,ROW()−1,0))))

  Fill until the end of the column.

  Columns B and C contain a VLOOKUP formula. The formula is the same in the two columns, with the exception of the number indicating which column of the table, the returned value must come. The version of 'testing' of the formula in B2 is shown. When filled to the bottom, this formula should copy the names of fruits where they are both on the table 1, in the line that they appear in column A, and display a triangle of error in the lines where there is no name in column B to the one in the column (and in the rows where column A is empty). The error message for each of them should be "VLOOKUP couldn't find the requested value."

  Table 2::B2 (trial version): = VLOOKUP ($A, table 1: $b$ C, 1, FALSE)

  (FALSE appears in the formula as 'exact match' editor)

  If the behavior is as described, add IFERROR before VLOOKUP, and , "") after the closing parenthesis to match the 'final version'. " (See "why two versions? below.)

  2::B2 (final version) of the table: SIERREUR = (VLOOKUP ($A, table 1: $b$ C,1, FALSE),' ')

  2::C2 (final version) of the table: SIERREUR = (VLOOKUP ($A, table 1: $b$ C,2, FALSE),' ')

  Fill both until the end of their respective columns. Results should now be as shown above.

  Note: Why two versions?

  Function SIERREUR is ideal for use as a trap for the error, but it acts on all errors, not only the one you plan to trap. Best practice is to add to this trap only if you are sure that the formula generates other error messages that awaits you and using in this case we know VLOOKUP, who has been charged with finding an "exact match" will throw an error when it does. Function SIERREUR catches this error and puts a string anywhere in the cell, making it appear empty.

  Kind regards

  Barry

• Cell.Contents not correctly resolve the empty strings if in excess... Is this a Bug or me?

  Greetings, Folks.

  It's driving me crazy. I can reproduce the problem over and over again. I'm missing a reason why cell.contents would be assessed differently in the case of condition in excess than no? I don't understand...

  Here is the scenario of. CS6, Win7, VB.Net (but the logic is simple so stay with me...).

  Object in question is a line of 3 cells with values in the respective cells: text, double value, double the value.

  Here's the problem. (gitc = 1 in all these test cases)

  If Not HasValue (curRow.Cells(gitc + 1). Content) then

  Here's the simple function called by the line above:

  Private Function HasValue (value as object( ) As Boolean

     If IsDBNull (value) OrElse value = "" Then Return Fake Else Return True

  End Function

  That is the problem. The code works as expected, provided that the referenced line is not in a State in excess, the object is a text value, and of two values, where the function returns an appropriate assessment. But if the line is in a State in excess, the object resolves in three empty strings ("" ") and as a result, the function returns the wrong assessment.

  Here the rub. If I lie down (or shorten) the column that puts a DIFFERENT line in the place in excess, the same result occurs to this different line, so I know that's not the values.

  Sorry for the long explanation, but I felt that it is important to give as much information as possible when you ask for help.

  Thank you very much for any help and/or an overview.

  TT

  Ah, I am a JavaScripter, but the Council is good even if the syntax is incorrect.

  The fact is that, if the cell is in excess and then its content is indeed empty. What is not empty is the subject of the text in the cell. You probably should look into it. In JavaScript is:

  myCell.texts [0] .silence

  Dave

• Style of play based on the cell content

  Is it possible to use GREP or something to apply the style to its cells ' contents?

  Location:

  I have a table of about 10 K lines and in the cells of a column contain display symbols. They have different colors. Manually is a living hell for me.

  Use it (MyColorCellStyle should be set to your cell style):

  if (app.selection.length == 1)
  {
            app.findTextPreferences = null;
            app.findTextPreferences.findWhat = "<266a>";
            myResults = app.selection[0].findText();
            for (i=0; i
  Not bad, considering that I'm down with a case of the sniffles & me 'ead is' urting.
  		   

• Please help - value of the long column of SQL report required in a separate cell

  Hello.
  
  I need to create a SQL report with the structure as below:
  
  Country city vertical Business details for the State (detail desc)
  MY Quincy Healthcare US
  It is a detailed desc value that is displayed in a different cell.
  It is a detailed desc value that is displayed in a different cell.
  It is a detailed desc value that is displayed in a different cell.
  It is a detailed desc value that is displayed in a different cell.
  US MY Braintree, HE
  It is a detailed desc value that is displayed in a different cell.
  It is a detailed desc value that is displayed in a different cell.
  It is a detailed desc value that is displayed in a different cell.
  
  I came across a solution where you can hide/show the column value in another cell. But my requirement is that it should be displayed when the page opens, and the user will not have to click a button to see the value. This is mainly for their presentations, and printing. so its very annoying for them to click on the buttons so much to see the value of desc of detail for each record. I'm new to Java script, please help

  I'm not sure to understand your needs - you are showing us 2 data lines, lines 7 or 9? You want the long description of detail on the same line, or below?

  I'll go on the assumption that you are showing us two rows, and long descriptions in this example are found along 3 to 4 lines, and you want long descriptions under the details. In this case, I suggest using "column name" models They are much easier to use as they appear when you look at everything first, so bear with me.

  Under 'shared components', select 'Models' and click then on create yellow > button. You create a report model, from scratch. On the last page of the wizard, select "Named column (model line)" for the type of model. This will create a model rather generic (and useless), which you'll have to edit; I don't know why they chose to not send you directly in the editor. When you change it, you will see that the single field whose value is 'Model line 1', and it is set to:

  #1##2##3##4##5#
  

  To meet your needs with basic features, change it to something in the sense of:

  #COUNTRY##STATE##CITY##VERT#
  #DETAILS#
  

  Then, you probably want to put something in the position of the column model, such as:

  CountryStateCityVertical Business
  Details
  

  Applies to whatever you want, of course the CSS styles.

  Using the model is simple: If your report, select the model and make sure that your SQL returns values using the column names specified in your model. Otherwise, you will see "#COUNTRY #" literal text in your report.

  You can get fancy with these, of course, as the application of different styles for alternating rows, but I'll leave that as pretty good to help you get started (I hope).

  -David

• By matching SQL reports in a region so that all the top edges are aligned

  I have 3 parts of SQL report in column 2. I want to display so that their top edges are aligned.
  
  Approved 40 report conditional Tests (column 2)
  60 unlicensed tests conditional statement (column 2)
  80 approved count by Build report (column 2) conditional
  
  What actually happens is that the reports are all centered vertically towards the middle of the largest report (above). Here's a raw ASCII picture:
  
  Tests approved
  Category #.
  Area 1 100
  Area 2 100 * unapproved Tests *.
  Category in box 3 100 # * approved number of construction *.
  Area 4 100 area 1 50 11.0.1 700
  Box 5 100 area 2 50
  Field 6 100
  Area 7 100
  
  As the report the leftmost is the highest, two other reports eventually centered vertically in the middle of the report to the left.
  
  Instead, I would like that all the top edges lined up like this:
  
  Approved tests Trials not approved Number approved by build                           
  # Category 11.0.1 # 700
  Area 1 100 area 1 50
  Area 2 100 area 2 50
  Area 3 100
  Field 4 100
  Field 5 100
  Field 6 100
  Area 7 100
  
  Nothing I have tried so far has worked. Someone has an idea how to do this? Thank you...

  You could try to wrap areas in the regions of html that essentially give you the ability to specify a valign = top for parts of report.
  Thus, your zones to look like this:

  30 report start - contains source = (div) region

  Approved 40 report conditional Tests (column 2) Contains 45 report 2 - Start

  60 unlicensed tests conditional statement (column 2)

  Contains 65 report 3 - Start

  80 approved count by Build report (column 2) conditional

  85 end - report ".(mobster) »

  Replace the rafters of)

  There may be a more elegant solution with models or level of CSS page or something...
  But it should work.

  Published by: Bob37 on Sep 17, 2010 15:33

  Published by: Bob37 on Sep 17, 2010 15:33

• Sorry, this content is not allowed when you try to post in the PL/SQL forum.

  Hello
  
  Also the command SQL and reserved words, the formulations used by my request.
  about 37 contained lines:
  
  row_cnt, rec_cnt, disc_amt, item_id, tmp_tot, amount, PMI.
  
  Am confused as to what word/s was considered at fault.
  
  can send the contents of any message to the moderator for verification?
  
  Concerning
  Zack
  
  Published by: Zack.L on July 25, 2010 17:20

  Ah, I see John "440bx - 11 GR 2" figured out that the word problem was "discount" on the sorry, this content is not allowed when you try to view.. (I replaced the "c" by "& #99;" here to avoid the same fate.)

• Align the top of the cell

  I put a spry menu in a table cell but need to align to the top of the cell. I used to be able to do this in older versions of DW simply aligning the 'top', but it does not work. not sure if it of the spry menu or changed the way to align cells in a table to the top.

  > how to align the table
  > cells to the top has changed.

  HTML has not changed. DW would have nothing to do with it.

  This will be aligned with the top of the cell

  To say that the more we would need to see your code - please show us.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "jojo6x" wrote in message
  News:gfuku0$9IS$1@forums. Macromedia.com...
  > I put a spry menu in a table cell, but need to align to the top of the
  > cell phone.
  > I used to be able to do this in older versions of DW, lining up only
  > "high."
  > but it does not work. not sure if it's the spry menu or how to align
  > table
  > cells to the top has changed.
  >