Align the labels and the lovs in a proper order?

Similar Questions

• Alignment of label and SimpleTextField

  Hi all

  Is there a built-in method to align all labels and values as the ObjectList control done automatically on 4.6? In other words, the label is left justified, but the field is right justified.  I find that given the difference between the field and its entry - while poor design of a full application size, it gives a much more aerodynamic look on a small screen.

  This is the default alignment:

  First Label: FirstFieldSecond Label: SecondFieldThird Label: ThirdField
  

  This is the alignment that I'd like to see

  First Label:               FirstField
  Second Label:             SecondField
  Third Label:               ThirdField
  

  The label is left-aligned, while the field is right-aligned and right-justified.

  I tried a simple solution by a LabelField (FIELD_LEFT) and a SimpleTextField (FIELD_RIGHT) to a HorizontalFieldManager, but the two fields are always to the left without the space between the two. My other thought is to extend FieldManager to explicitly place the fields - giving etiquette, the minimum size and maximum width SimpleTextField possible - but I still need to justify the text in this area which I was not able to make the right successfully.

  Alternatively and perhaps better to give a consistent experience across devices with larger screens, would be the alignment as

             First Label: FirstField          Second Label: SecondField           Third Label: ThirdField
  

  It's the label fields are right justified in the field wider label. and value fields are justified to the left in the same field.

  Ideas/suggestions? I'd appreciate also your comments on whether it's worth the practice - is acceptable default alignment for you?  Your users seems acceptable/usable without any major problems?  As to the incompatibility between the alignment of text and labels, vs objectlistfields fields (this is what bothers me the most..)?

  Thank you

  Marc

  Take a look at the UserListScreen in the example below.

  How to-backup and restore of small amounts of data using SyncItem
  Article number: DB-00092

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800625/How_To _...

  Out of the box, she will achieve the results that match your third example.  For ages in the right-aligned sample, add the "LabelField.USE_ALL_WIDTH". Style DrawStyle.RIGHT"age LabelFields.  This is the alignment you want (your second example).

• align the JLabels and JTextFields vertically in different areas

  I have 3 TitledBorders to 3 different areas of my frame.
  Each region has its own components - JLabels, textfield, etc..
  How to align the JLabels and JTextFields vertically in different areas?
  for example, for the following test program, how to configure label1, label2, label3 so that their right sides all align them vertically and
  TF1, tf2, tf3 so that their left ribs all line up vertically?
  

  import java.awt.GridBagConstraints;
  import java.awt.GridBagLayout;
  import java.awt.GridLayout;
  import java.awt.Insets;
  
  import javax.swing.JFrame;
  import javax.swing.JLabel;
  import javax.swing.JPanel;
  import javax.swing.JTextField;
  import javax.swing.border.TitledBorder;
  
  public class TitledBorderDemo extends JFrame {
    public TitledBorderDemo() {
      super("TitledBorderDemo");
  
      JTextField tf1 = new JTextField("hello", 6);
      JTextField tf2 = new JTextField("hello", 12);
      JTextField tf3 = new JTextField("test");
      JTextField tf4 = new JTextField("test2");
  
      JLabel label1 = new JLabel("1234567890ertyuiyup label");
      JLabel label2 = new JLabel("zzzzzzzzzzzzzzzzzzzzzzzzzzzzzz long label");
      JLabel label3 = new JLabel("short label");
      JLabel label4 = new JLabel("test");
  
      JPanel panel_tf = new JPanel(new GridBagLayout());
      JPanel panel_pf = new JPanel(new GridBagLayout());
      JPanel panel_ftf = new JPanel(new GridBagLayout());
      
      GridBagConstraints constraints = new GridBagConstraints(0, 0, 3, 3,
              0.0, 0.0, GridBagConstraints.WEST, GridBagConstraints.NONE,
              new Insets(10, 10, 10, 10), 0, 0);
  
      constraints.gridx = 0;
      constraints.gridy = 0;
      constraints.gridwidth = 2;
      constraints.anchor = GridBagConstraints.WEST;
      panel_tf.add(label1, constraints);
      
      constraints.gridx = 2;
      constraints.gridwidth = 1;
      constraints.anchor = GridBagConstraints.EAST;
      panel_tf.add(tf1, constraints);
  
      constraints.gridx = 0;
      constraints.gridy = 1;
      constraints.gridwidth = 2;
      constraints.anchor = GridBagConstraints.WEST;
      panel_pf.add(label2, constraints);
  
      constraints.gridx = 2;
      constraints.gridwidth = 1;
      constraints.anchor = GridBagConstraints.EAST;
      panel_pf.add(tf2, constraints);
      
      constraints.gridx = 0;
      constraints.gridy = 2;
      constraints.gridwidth = 2;
      constraints.anchor = GridBagConstraints.WEST;
      panel_ftf.add(label3, constraints);
  
      constraints.gridx = 2;
      constraints.gridwidth = 1;
      constraints.anchor = GridBagConstraints.EAST;
      panel_ftf.add(tf3, constraints);
  
      constraints.gridx = 3;
      constraints.gridwidth = 1;
      constraints.anchor = GridBagConstraints.WEST;
      panel_ftf.add(label4, constraints);
  
      constraints.gridx = 4;
      constraints.anchor = GridBagConstraints.EAST;
      panel_ftf.add(tf4, constraints);
  
  
      panel_tf.setBorder(new TitledBorder("JTextField1"));
      panel_pf.setBorder(new TitledBorder("JTextField2"));
      panel_ftf.setBorder(new TitledBorder("JTextField3"));
  
      JPanel pan = new JPanel(new GridLayout(3, 1, 10, 10));
      pan.add(panel_tf);
      pan.add(panel_pf);
      pan.add(panel_ftf);
      this.add(pan);
    }
  
    public static void main(String args[]) {
      JFrame frame = new TitledBorderDemo();
      frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
      frame.setSize(600, 450);
      frame.setVisible(true);
    }
  }

  I forgot how tedious GBL can be straight out of the box, since I usually use a helper class that I wrote for the work of constraints (a common approach).

  Anyway, here's a sample program ussing the technique I described previously. Note the horizontal on the panels of 1st and 3rd spacers that are used to "take out" the text fields so they line up on the left with the text of Group 2 field. I also added some glues at the end of these panels to make each Panel to fill in the same width.

  import java.awt.*;
  
  import javax.swing.*;
  import javax.swing.border.*;
  
  public class TitledBorderDemo extends JFrame {
    public TitledBorderDemo() {
      super("TitledBorderDemo");
  
      JLabel nameLabel = new JLabel("Name");
      JTextField nameText = new JTextField(20);
  
      JLabel addressLabel = new JLabel("Address (City & State)");
      JTextField addressText = new JTextField(40);
  
      JLabel phoneLabel = new JLabel("Phone");
      JTextField phoneText = new JTextField(20);
  
      int longWidth = addressLabel.getPreferredSize().width;
  
      GridBagConstraints constraints = new GridBagConstraints();
  
      //--------------------
  
      JPanel p1 = new JPanel(new GridBagLayout());
      p1.setBorder(createBorder("Name"));
  
      constraints.gridx = 0;
      constraints.gridy = 0;
      constraints.anchor = GridBagConstraints.EAST;
      constraints.insets = new Insets(4,6,4,6);
      p1.add(nameLabel, constraints);
  
      constraints.gridx = 1;
      constraints.anchor = GridBagConstraints.WEST;
      p1.add(nameText, constraints);
  
      constraints.gridx = 2;
      constraints.anchor = GridBagConstraints.WEST;
      constraints.fill = GridBagConstraints.HORIZONTAL;
      constraints.weightx = 1.0;
      p1.add(Box.createHorizontalGlue(), constraints);
  
      constraints.gridx = 0;
      constraints.gridy = 1;
      constraints.fill = GridBagConstraints.NONE;
      constraints.weightx = 0.0;
      p1.add(Box.createHorizontalStrut(longWidth), constraints);
  
      //--------------------
  
      JPanel p2 = new JPanel(new GridBagLayout());
      p2.setBorder(createBorder("Address"));
  
      constraints.gridx = 0;
      constraints.gridy = 0;
      constraints.anchor = GridBagConstraints.EAST;
      constraints.insets = new Insets(4,6,4,6);
      p2.add(addressLabel, constraints);
  
      constraints.gridx = 1;
      constraints.anchor = GridBagConstraints.WEST;
      p2.add(addressText, constraints);
  
      constraints.gridx = 2;
      constraints.anchor = GridBagConstraints.WEST;
      constraints.fill = GridBagConstraints.HORIZONTAL;
      constraints.weightx = 1.0;
      p2.add(Box.createHorizontalGlue(), constraints);
  
      constraints.gridx = 0;
      constraints.gridy = 1;
      constraints.fill = GridBagConstraints.NONE;
      constraints.weightx = 0.0;
      p2.add(Box.createHorizontalStrut(longWidth), constraints);
  
      //--------------------
  
      JPanel p3 = new JPanel(new GridBagLayout());
      p3.setBorder(createBorder("Phone"));
  
      constraints.gridx = 0;
      constraints.gridy = 0;
      constraints.anchor = GridBagConstraints.EAST;
      constraints.insets = new Insets(4,6,4,6);
      p3.add(phoneLabel, constraints);
  
      constraints.gridx = 1;
      constraints.anchor = GridBagConstraints.WEST;
      p3.add(phoneText, constraints);
  
      constraints.gridx = 2;
      constraints.anchor = GridBagConstraints.WEST;
      constraints.fill = GridBagConstraints.HORIZONTAL;
      constraints.weightx = 1.0;
      p3.add(Box.createHorizontalGlue(), constraints);
  
      constraints.gridx = 0;
      constraints.gridy = 1;
      constraints.fill = GridBagConstraints.NONE;
      constraints.weightx = 0.0;
      p3.add(Box.createHorizontalStrut(longWidth), constraints);
  
      //--------------------
  
      JPanel panel = new JPanel(new GridBagLayout());
  
      constraints.gridx = 0;
      constraints.gridy = 0;
      constraints.fill = GridBagConstraints.HORIZONTAL;
      constraints.weightx = 1.0;
      panel.add(p1, constraints);
  
      constraints.gridy = 1;
      panel.add(p2, constraints);
  
      constraints.gridy = 2;
      panel.add(p3, constraints);
  
      this.add(new JScrollPane(panel));
    }
  
    private Border createBorder(String title)
    {
      TitledBorder b = new TitledBorder(title);
      b.setTitleColor(Color.RED.darker());
      return b;
    }
  
    public static void main(String args[]) {
      JFrame frame = new TitledBorderDemo();
      frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
      frame.pack();
      frame.setVisible(true);
    }
  }
  

• Spacing between the label and the value

  I hope it is a simple guy.
  
  Does anyone know how to increase the space between the LABEL of the element and the value of the ELEMENT.
  
  Any help much appreciated.

  Hello

  Are your right-aligned labels?

  If so, use instead the following:

  style="padding-right:10px"
  

  This allows to insert a gap of 10px between the end of the label and the end of the cell

  Andy

• Align the two signals and measure the Phase Shift

  Hello

  I do an experiment in which I use the NI USB-6221 DAQ card. The jury is able to make 250 k samples/second. I want to measure two voltages in a circuit and find the phase shift between them at frequencies between 1 and 10000. First I ouputted a wave sinusoidal frequency variable through the Commission and applied to a test circuit. Then I used the Board to measure the two tensions consecutively (thus reducing the maximum sampling frequency at 125 k). I used the signals align VI and measured the two phases and then calculates the phase shift (VI attached in Phase 1). It worked well for the test circuit I built in which the phase shift went way logarithmique.20 degrees ~84.5 degrees and then stabilized. At frequencies above 5 000 Hz phase shift must have remained constant, but it varies more or less 1 degree. When the phase shift is 84.5 degrees, present a degree of variability is not particularly explicit. When I asked my program on the circuit that I really wanted to measure, the phase shift went from-. 5 degrees up to about 1.2 degrees. The change in the values of phase shift at high frequencies (> 3000) was environ.2 degrees. Given the small phase shift, this variation is unacceptable. Now I tried to use a sequence to each blood individually (increase the maximum sampling frequency to 250 k) and then align the two signals and measure the phase of each shift. When I use align it and re - sample Express VI to realign the two signals, I get the message "error 20333 analysis: cannot align two waveforms with dt even if their samples are not clocked in phase." Is it possible to align two signals I describe here? I enclose the new VI as Phase 2

  Matthew,

  I think I have an idea for at least part of the problem.

  I took your program data and deleted stuff DAQ.  I have converted the Signal on the chart control and looked then what was going on with the signal analysis.

  The output of the Waveforms.vi line has two waveforms, like the entry.  However, arrays of Y in the two waveforms are empty!  It does not generate an error. After some head scratching, reading the help files and try things out, that's what I think is happening: the time t0 two input signals are 1,031 seconds apart. Since the wavefoms contains 1,000 seconds of data, there is no overlap and may not align them.

  I changed the t0 on two waveforms are the same, and it lines up.  The number of items in the tables is reduced by one. Then I increased the t0 of 0.1 seconds on the first element. The output had both greater than the entry by dt t0 t0 and the size of the arrays was 224998.  Reversing the t0 two elements shifts the phase in the opposite direction.

  What that tells me, is that you can not reliably align two waveforms which do not overlap.

  I suggest that you go to 2-channel data acquisition and that it accept the reduced sample rate.  You won't get the resolution you want, but you should be able to tell if something important happens.

  You may be able to improve the equivalent resolution by taking multiple steps with a slight phase shift. This is similar to the way that old oscilloscopes of sampling (analog) worked. Take a series of measures with the signal you are currently using.  The make enough average to minimize changes due to noise. Then pass the phase of the signal of excitement to an amount that is smaller than the resolution of phase of sampling rate and repeat the measurements.  Recall that I calculated that for a 5 kHz signal sampled at 125kHz, you get a sample every 14.4 degrees. If shift you the phase of 1 degree (to the point/mathematical simulation), you get a different set of samples for excitement.  They are always separated by 14.4 degrees.  Take another series of measures. Transfer phase another degree and repeat.  As long as your sampling clocks are stable enough so that frequency does not drift significantly (and it shouldn't with your equipment), you should be able to get near resolution of what you need.  The trade-off is that you need to perform more measurements and may need to keep track of the phase shifts between the various measures.

  Lynn

• What programs are getting extract comments and keywords and put them in the labels and captions in Picasa?

  What free programs I would like to extract comments and key words and put them into computer-based labels and legends Picasa? Is this possible with MSVB 2008 or 2010 Express? I'm not a real programmer, but I can hack a bit (in the old sense of the 1980s the word hack). I tried searching internet but no combination of the words comment, tag, keyword, and legend get something usable. Too common words, everything matches. BTW, I use XP, cannot afford to Windows Vista SE (that's my name for 7)

  What I want to do is to add tags and comments to the photos that I am scanning. It is a long-term project to archive all the family of the peaks. Some dating back to 1900 photo of great great grandparents. The key here is long-term. I thought that the properties/summary/comments (and keywords) would be likely to be on board for many years (legacy stuff). Jac I can't find any program that uses or leans on them today! And I just saw a pic of the Win7 properties and guess what? No summary! Picassa is quite widely used but who knows. Nothing is stable for a long time. Can not even get to diskettes and CDs and cassettes now become more difficult to find. And DVDs are on the side too. How can I put the photos on the long term and accessible storage?

  My plan is to use Picassa and .jpg. I'll put a copy of Picassa on every DVD that I use (in data mode). I'll do a mode DVD video slide show as a backup. The disks are pretty cheap even for me. I will not use double layer, but too unreliable. And I intend to check them every few years for readability. I have a few CD that can be read even with 12 years older data recovery programs.

  So if anyone has any comments, suggestions or additions, let it go. I think that it is indeed an important subject, keeping old data accessible.

  Hello

  You can post the issue here for more information:

  https://groups.Google.com/a/googleproductforums.com/Forum/#! categories/picasa/picasa-for-windows

• HP Envy 110 Series printers and I tried several times to reprint documents m in different qualities and align the cartridges, but the lines of words have dragged through them

  I have a HP Envy 110 series printers and I tried several times to reprint documents m in different qualities and align the cartridges, but the lines of words have dragged through them and are not clear. Much of the document is blurry and cut through. Any suggestions?

  Read this article, he describes some steps on how to use the printer utility that came with the printer to run a few steps that might improve the print quality, including cleaning the print cartridge and other procedures.

• The data including labels and descriptions added to a photo in the photo library remains with photo

  original title: data including labels and descriptions added to a photo in the photo library remains with the picture even if I switch to a new computer without photo gallery

  I have some family photos and historical photos for my family genealogy. I am tagging these and adding descriptions such as when and where they were taken and that the opportunity was, etc. This information will always be with digital photography when I send to someone or see it on another computer?

  I have some family photos and historical photos for my family genealogy. I am tagging these and adding descriptions such as when and where they were taken and that the opportunity was, etc. This information will always be with digital photography when I send to someone or see it on another computer?

  ============================================
  Some metadata is stored in a database exclusive and is
  not written back to the photo files.

  If you right click on a photo and go to... Properties Summary / tab.
  Tip... you can see the data included.

• Whenever I reboot, it reorganizes my desktop icons and aligns the Office right

  Separated from this thread.

  I have the same problem.  Whenever I reboot, it reorganizes my desktop icons and aligns the Office on the right.  Like everyone else, auto arrange is disabled.  What a real answer and fix?  Hello MS, someone from home?

  Hello

  Welcome to the Microsoft community forums. Let me help you with your concern. You may experience this problem if align icons on the grid is enabled. Follow these steps and check.

  1. Right-click on the desktop.

  2. Select display, uncheck Align icons to grid and the auto arrange icons.

  3. Now move the desktop icons, restart the computer and check.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Align the text field and a button.

  Hi all

  I use Oracle APEX 5.0.1.

  I tried to create a search page that contain a text field and a button.

  But I can't align the text field and button, so they can have the same top position.

  Could someone please help me solve this problem?

  

  Thank you and best regards,

  Troy.

  Hello.

  Have you tried to add a css attribute to the button? like: style = "top: 4px;

  Concerning

• If I have the two LOV in the same table then how to connect when I select first and second LOV value also change?

  Mr President

  If I have the two LOV in the same table then how to connect when I select first and second LOV value also change?

  My two fields are FLOW AND DR_NAME

  FLOW = ACCT_ID

  DR_NAME = ACCT_NAME

  I created with success of LOV for these fields.

  First LOV gives acct_id in the debit field and second LOV gives the value of acct_name to dr_name.

  How can I report these lov, it's that when I change my acct_id then acct_name also change

  I have these two tables

  CREATE TABLE "NOM"  (
    "ACCT_ID" VARCHAR2(7) NOT NULL ENABLE, 
    "ACCT_NAME" VARCHAR2(50) NOT NULL ENABLE, 
    "O_BAL" NUMBER(13,2),
    CONSTRAINT NOM_PK PRIMARY KEY ("ACCT_ID")ENABLE
     
     );
  CREATE TABLE "VOUCHERDET" (
    "V_ID" VARCHAR2(9) NOT NULL ENABLE,
    "LINEITEM" NUMBER ,
    "DEBIT" VARCHAR2(7) , 
    "DR_NAME" VARCHAR2(50), 
    "CREDIT" VARCHAR2(7) , 
    "CR_NAME" VARCHAR2(50), 
    "PARTICULARS" VARCHAR2(100), 
    "AMOUNT" NUMBER(21,2),
  CONSTRAINT VOUCHERDET_PK PRIMARY KEY ("V_ID","LINEITEM")ENABLE, 
  CONSTRAINT PUR_SAL_LINE_POD_FK FOREIGN KEY(PROD_ID)
    REFERENCES PRODUCTS (PROD_ID)ENABLE,  
  CONSTRAINT VOUCHERDET_DEBIT_FK FOREIGN KEY ("DEBIT")
     REFERENCES "NOM" ("ACCT_ID") ENABLE, 
  CONSTRAINT VOUCHERDET_CREDIT_FK FOREIGN KEY ("CREDIT")
     REFERENCES "NOM" ("ACCT_ID") ENABLE,  
  CONSTRAINT VOUCHERDET_V_FK FOREIGN KEY ("V_ID")
     REFERENCES "VOUCHER" ("V_ID") ON DELETE CASCADE ENABLE
    );
  
  

  Concerning

  so, instead of this second ActId, choose ACCT_NAME:

  

• Stacking and align the pictures of the Moon

  I took 20 full moon pictures with my digital SLR. I tried to stack them to produce a clearer picture with less noise, but its does not work. Can someone help me please?

  Here are the steps I use

  1. the use of the file - Scripts - load files in a stack

  When this check all two "attempt automatically Align Source images" and "Create Smart object after loading layers"

  2. Select the smart object

  3. go to the layer stack Mode - Smart Objects - median

  If there is a problem in aligning the layers change the above to:

  1. the use of the file - Scripts - load files in a stack
  Do not check not "trying to automatically Align Source images" and "Create Smart object after loading layers.

  2 reduce the opacity of the layers and use move to align manually

  3. increase the opacity to 100%

  4. create a smart object from the layers (layer - Smart Objects - Convert to smart object)

  5. Select the smart object

  6. go in the layer stack Mode - Smart Objects - median

  Hope this helps

  Dave

• Size and align the Image with Perspective Warp

  How do you get an image to the size and align it with the perspective distortion, unless I approach this wrong?

  You don't say how you approaching.  If something has a look of perspective.  He has a perspective not shape, size and resolution.   First of all, you need to resize the image to the size of the shape's aspect ratio. the boundaries of the shape. Hide the image resize to this form. Perspective transform the layer just perspective-looking mask.  And also to position the layer.

  To tell the truth do not know how to automate all this.  Automate everything resizes images for the limits of the perspective transform the final location of the image.  I align the image resize without perspective the limits of location and hide the image to the shape in the image of the perspective transformation.  I finished the automation here.  I leave the user with the responsibility to transform the layer to add the look of the perspective and rotation. I have no idea how to do to automate rotation and the appearance of perspective or create to a template that can be filled with automation of Photoshop.

• How to set the color of the label and hintText inputText

  Hi all

  I use jdev 11.1.2.4.0 version

  in my case, I want to label and hintText the color of the amx:inputText component.

  so I create a class css "myStyle. CSS '.

  < skin-added id = "s1" >

  > skin id < mobileFusionFx < / skin-id >

  css/mystyle.css < name-sheet-style > < / style sheet name >

  < / skin-add >

  < / adfmf-skins >

  Thank you

  Manish

  If you can't find things yourself, you're going to struggle.

  http://www.Ateam-Oracle.com/debugging-MAF-applications-on-Android/

• [Solved] GL: Opening and closing periods does not display the LOV book

  Hello

  I created a new book and associated with the profile option ' GL: Data Access set 'and' GL: name of the book ' at the level of responsibility.

  

  I created a new responsibility to access my book.

  

  When I tried to open a period for the first time since the new responsibility, I'm not able to see all the values in the LOV Leder.

  

  Am I missing any installation?

  Thank you

  Saida

  Hello

  Try running the following question with your access_set_id in parameter:

  SELECT DISTINCT lgr.name, lgr.ledger_id, acc.access_privilege_code, lgr.latest_opened_period_name, lgr.first_ledger_period_name, lgr.short_name, lgr.chart_of_accounts_id

  OF acc, gl_ledgers lgr gl_access_set_ledgers

  WHERE acc.access_set_id =: PARAMETER.access_set_id

  AND lgr.ledger_id = acc.ledger_id

  AND lgr.object_type_code = 'L '.

  ORDER BY lgr.name

  If this script returns no rows check your request competitor status "General Scriptures accounting installation program". It seems that gl_access_set_ledgers materialized view was not refreshed successfully. Submit the program accounting General Ledger Setup again and check that the program has completed successfully.

  Kind regards

  Dmitry