Stacking and align the pictures of the Moon

Similar Questions

• HP Envy 110 Series printers and I tried several times to reprint documents m in different qualities and align the cartridges, but the lines of words have dragged through them

  I have a HP Envy 110 series printers and I tried several times to reprint documents m in different qualities and align the cartridges, but the lines of words have dragged through them and are not clear. Much of the document is blurry and cut through. Any suggestions?

  Read this article, he describes some steps on how to use the printer utility that came with the printer to run a few steps that might improve the print quality, including cleaning the print cartridge and other procedures.

• Whenever I reboot, it reorganizes my desktop icons and aligns the Office right

  Separated from this thread.

  I have the same problem.  Whenever I reboot, it reorganizes my desktop icons and aligns the Office on the right.  Like everyone else, auto arrange is disabled.  What a real answer and fix?  Hello MS, someone from home?

  Hello

  Welcome to the Microsoft community forums. Let me help you with your concern. You may experience this problem if align icons on the grid is enabled. Follow these steps and check.

  1. Right-click on the desktop.

  2. Select display, uncheck Align icons to grid and the auto arrange icons.

  3. Now move the desktop icons, restart the computer and check.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Size and align the Image with Perspective Warp

  How do you get an image to the size and align it with the perspective distortion, unless I approach this wrong?

  You don't say how you approaching.  If something has a look of perspective.  He has a perspective not shape, size and resolution.   First of all, you need to resize the image to the size of the shape's aspect ratio. the boundaries of the shape. Hide the image resize to this form. Perspective transform the layer just perspective-looking mask.  And also to position the layer.

  To tell the truth do not know how to automate all this.  Automate everything resizes images for the limits of the perspective transform the final location of the image.  I align the image resize without perspective the limits of location and hide the image to the shape in the image of the perspective transformation.  I finished the automation here.  I leave the user with the responsibility to transform the layer to add the look of the perspective and rotation. I have no idea how to do to automate rotation and the appearance of perspective or create to a template that can be filled with automation of Photoshop.

• Open several IMG in stack and align in the defined pattern

  Hello everyone.

  I know manage ps but related to scripts in the ps I'm a real noob. because of that I want to post this robot the script should have and I am grateful for each index or to start.

  The attachment shows the model how images should be aligned.

  1. open a new document with a given size (this is done manually, got a .psd here with adjustmentlayers)

  2 import six images (lets call them from A to F) in the layerstack (unter eventually all adjustment layers)

  3. align six images as shown in attachment: picture A go on position 1, image B go in position 2 and so on.

  4. save the image in specific format (.tif)

  I hope some of you can help me with the good points of departure, I don't expect a full script, but some good contours and keywords would be great.

  Thank you

  

  As for example to create a PSD with all your images, but add them by using file - place, this will create dynamic objects.

  Once you have done this, then the PSD could be a model.

  The following Script could replace it all smart objects with the first six papers selected in Bridge...

  main();
  function main(){
  if(!documents.length) return;
  var SOs = getSOPlusIDs();
  //reverse the layer order if required
  //SOs.reverse();
  if(SOs.length != 6){
      alert("There should be 6 Smart Objects and you have " + SOs.length);
      return;
      }
  if (!BridgeTalk.isRunning( "bridge" ) ) {
      alert("You need to select your files in Bridge!");
      return;
      }
  var bridgeFiles = GetFilesFromBridge();
  if(bridgeFiles.length < 6 ) {
      alert("You need to select at least 6 files!\rOnly " + bridgeFiles.length + " files selected!");
      return;
      }
  for(var a in SOs){
      selectLayerById(Number(SOs[a][0]));
      replaceSO(bridgeFiles[a].toString());
      }
  }
  function replaceSO(SO){
  var desc = new ActionDescriptor();
  desc.putPath( charIDToTypeID( "null" ), new File( SO ) );
  executeAction( stringIDToTypeID( "placedLayerReplaceContents" ), desc, DialogModes.NO );
  };
  function selectLayerById(ID, add) {
      add = (add == undefined)  ? add = false : add;
   var ref = new ActionReference();
   ref.putIdentifier(charIDToTypeID('Lyr '), ID);
   var desc = new ActionDescriptor();
   desc.putReference(charIDToTypeID('null'), ref);
   if (add) {
    desc.putEnumerated(stringIDToTypeID('selectionModifier'), stringIDToTypeID('selectionModifierType'), stringIDToTypeID('addToSelection'));
   }
   desc.putBoolean(charIDToTypeID('MkVs'), false);
   executeAction(charIDToTypeID('slct'), desc, DialogModes.NO);
  };
  function getSOPlusIDs(){
     var ref = new ActionReference();
     ref.putEnumerated( charIDToTypeID('Dcmn'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
     var count = executeActionGet(ref).getInteger(charIDToTypeID('NmbL')) +1;
     var Names=[];
  try{
      activeDocument.backgroundLayer;
  var i = 0; }catch(e){ var i = 1; };
     for(i;i		   

• How to uninstall TOSHIBA Bluetooth Stack and all the drivers?

  Hello! I installed TOSHIBA Bluetooth Stack of [here | http://aps2.toshiba-tro.de/bluetooth/?page=download] or, more precisely of the [here | http://aps2.toshiba-tro.de/bluetooth/?page=download-toshiba] (8.00.12 |) Windows 2000 / XP / Vista / Windows 7 x 32 | Multilanguage) (_I have windows xp_). I tried to connect my phone with it, but it didn't work the way I expected.

  As I did not, I tried to uninstall, but I had problems there too. :( I was able to uninstall it from the Control Panel / Add-Remove programs and I also uninstalled in Device Manager, but it does not work too.

  It is more drivers, and they are all on my system: in my departure much I option 'connect too', in the Panel, I "Bluetooth Local COM" and Bluetooth devices Manager also lights up while windows starts... I had to remove all those things, but I don't know how? Help, please!

  Also, if someone could explain to me how to transfer data through your Toshibas Bluetooth, that would be nice too - in this case I would not uninstall it. Only in this case when it seems useless to me, these drivers are only bothers me. They spread throughout the system as someone wanted to hurt me! xD

  Thank you once again, people! :)

  * EDIT *: I now have to stop bluetooth manager executed departure while windows starts, so now it's less a problem. I don't particularly want some unnecessary processes slow down my computer. On the other hand, there is a problem that I have not mentioned - the computer restarts it self without reason in some cases. However, it seems that these reboots are associated with uninstalling programs - especially during attempts to uninstall toshiba bluetooth stack. Anyway I'll examine this reboot problem a bit more tomorrow perhaps it relates only to install/uninstall these drivers toshibas.

  Post edited by: samir89ns
  the reason for the change: I forgot to say certain things

  I use laptops Toshiba and Toshiba BT for years and I've never had no problem to connect my mobile phone using the BT software. I use it mainly to transfer data (photo made by mobile phone).
  It is so easy to make the connection between the computer laptop and phone so I n t understand why you have all these problems.

  If you n t need it disable Autostart BT software.

  You have for Toshiba laptop?

• Lousy print quality no matter how many times I clean and align the printer.

  I really like this printer, so don't want to give up on this! Then... color printing is fine. Is the black which is ruin. Clean the printheads several times and the report that prints shows the problem... printing of text is faded in task, lack of parts or lines through the text and others. I've lined up the heads and that works great... have replaced the black ink cartridge, but still the same issue.

  Any ideas would be great... we had a paper jam at the time but it is erased, but perhaps it damaged something? Or is it a manual cleaning, I can do that could clarify this?

  THX... ~ Paul

  And so... I continued to clean the print heads, repeatedly... dozen or several times and it finally started getting better little by little. Clean them some more and finally got the head to complete alignment properly. Then I'll call this resolved for now, and there you have it... clean, clean and clean...

• DNG import a stack and align as a smart object without rasterising?

  I can't do this without rasterising. It would be a great help for my workflow. Is there a solution for this option to prevent a destructive change?

  Any help much appreciated.

  Ryan

  You can't do an align layers with a dynamic object - I tried. Most of the time when you make a layer to align, it is followed by a merger of the layers, which also won't work with the statement of objections, as PS does not change the tones to mix properly, so I think Adobe don't think it would be nice to have so MUCH to this effect.

• align the cells with shared values

  3.6.1 the numbers

  I would like to compare two columns and align the cells, if they are equal. Ideally, I would like to include the adjacent cells in the second column in the alignment.

  Example:

  Run the formula (if possible) to format the following text:

  

  As follows:

  

  Hi cnickflight,

  Easy to do by transferring the data to another table.

  

  Table 1 contains the original data. I reduced the names of fruits to three letter codes to reduce type them, but this does not change the process.

  Column A of table 2 contains a formula that copies the existing data in column A of table 1 and insert null strings when there is no data in the table 1.

  The formula is entered in cell A2 and filled down.

  Table 2::A2: = IF (ROW () −1 > COUNTA (table 1::A),"', SHIFT (table 1::$A$1,ROW()−1,0))))

  Fill until the end of the column.

  Columns B and C contain a VLOOKUP formula. The formula is the same in the two columns, with the exception of the number indicating which column of the table, the returned value must come. The version of 'testing' of the formula in B2 is shown. When filled to the bottom, this formula should copy the names of fruits where they are both on the table 1, in the line that they appear in column A, and display a triangle of error in the lines where there is no name in column B to the one in the column (and in the rows where column A is empty). The error message for each of them should be "VLOOKUP couldn't find the requested value."

  Table 2::B2 (trial version): = VLOOKUP ($A, table 1: $b$ C, 1, FALSE)

  (FALSE appears in the formula as 'exact match' editor)

  If the behavior is as described, add IFERROR before VLOOKUP, and , "") after the closing parenthesis to match the 'final version'. " (See "why two versions? below.)

  2::B2 (final version) of the table: SIERREUR = (VLOOKUP ($A, table 1: $b$ C,1, FALSE),' ')

  2::C2 (final version) of the table: SIERREUR = (VLOOKUP ($A, table 1: $b$ C,2, FALSE),' ')

  Fill both until the end of their respective columns. Results should now be as shown above.

  Note: Why two versions?

  Function SIERREUR is ideal for use as a trap for the error, but it acts on all errors, not only the one you plan to trap. Best practice is to add to this trap only if you are sure that the formula generates other error messages that awaits you and using in this case we know VLOOKUP, who has been charged with finding an "exact match" will throw an error when it does. Function SIERREUR catches this error and puts a string anywhere in the cell, making it appear empty.

  Kind regards

  Barry

• How can you align the image in a slide show widget?

  I add a slideshow widget. His images are "fill the frame proportionally. I didn't want the image to resize, so I made 2500 px wide because that is what I want it to fit across the screen. There is no way to align the image once in the widget to the right or left...

  Should I have to export as HTML and then go inside the code and align the image? Or is there a way to do it?

  I had a look at your website, and I can tell that you used one of the widgets by default slide show. You are certainly able to control the position of the images in the slideshow hero once they have been added.

  To change the alignment or the position of an image that is part of a slide show widget:

  1. With the selection tool click on the widget to select.
  2. Then, double-click on the image.
  3. This will select the edge of the image. You can now drag to the position of the image.
     
  4. Or alternatively, you can select one of the corner handles and change the size of the image.
     

• Align the stars...

  Hello...

  I'm looking to align several stars (five-pointed ones) to Center... (the problem is the horizontal alignment). Question is, how to work once on this subject?

  I tried / know the following:

  1. the bounding box is not "related" to the center of the star - kind have passed the road to manually move the Center. Duplicating and resizing of the star... it does not align horizontally.

  2 have you tried not to move downtown. Same result as 1. above

  3 have you tried the course of transformation, multiple stars created, expanded and dissociated. Made with both the Center adjusted manually than the default Center. Identical to 1. above

  4. have you tried to create a circle and aligning the stars to that... no luck

  In all cases the smaller copies seem to climb to the top... the sense that the top edges are closest to each other and lower edges are variable with more.

  Important point is copies... the original aligns on a circle. Copies only.

  Yes, it is possible to enter the Center points and line them up but surely there must be a way "automatic"?

  BTW, have tried this only with a star 5-spoke - like in the American flag. I doubt that the problem exists in a star with an even number of points.

  The frame enclosing is not "related" to the center of the star

  Here, you hit the nail on the head. So what you have to do is to find the geometric center of the star like this (use of bearings commented) to help:

  

  Using of the place where the lines cross as your Center, draw a (highest) larger rectangle than the bounding box of the star, colour it None and combine them with the star. Remove the two lines. Now you can automatically align.

• Stacking and trunking

  Hello

  I have a question regarding trunking in combination with the stacked switches. In my example, I have two switches that are stacked and stacked switch. I placed all the sales employees in VLAN 10 (put first in the stack) and the management VLAN 20 (second switch in the stack) on switches employees stacked. The servers are on 30 VLAN on the switch stacked.

  I need to assign trunkports between two switches stacked in order to allow the stacked switches communicate?

  Thanks in advance!

  The ports that are used for the stacking shouldn't be junction ports.  They are only dedicated for stacking, and once the two (or more) switches are stacked together, they become a single logical switch.  Think about your carpet as a simple switch.  You only need ports of connectors for the connection between the battery and the only stacked switch.

  I hope this helps.

  B

• How can I change the layout or the size of the photos in my Gallery?  I have started a project and downloaded some pictures of her.  Now when I click on projects opens the gallery page and I do not see the pictures because the vertical photographs are dis

  I have started a project and downloaded some pictures of her.  Now when I click on projects opens the gallery page and I do not see the images because the vertical photographs are displayed on the monitor.  I tried all layouts different portfolio and it does not change the way my photos appear in the gallery.  They are too big!  Here is my example.  Astriya photography

  Thanks for the help!

  Place the cursor over an image and a pencil appears on the side. Click on it and you will get the options including one to change the width and alignment. This seems to be the only option currently.

• How drag and drop a picture into a shape of the object?

  On my old Lion system that I used to be able to drag a picture from iphoto in the shape of the object open in Pages.  I can't be able to do more.  The system changed?  I tried to use Inspector (under help), but it won't let me access the file of the photo on the right.

  You can drag and drop a picture in a form in v4.3 Pages ' 09, but this can be done in any version of v5 Pages. Quite different applications, as well as more recent Pages has lost about 100 features that were in its antecedent.

  Check if you have Pages ' 09 v4.3 in your Applications: iWork ' 09 file. If so, use it.

  Pages v5 requires that you select a shape, and then on the Image tab in the right panel, you choose Image, scale to fill fill, and then select your image for the background. You cannot select this image from the inside, but you can add text to the form that will appear on your image.

• How to transfer pictures from iphone to PC and keep the date, time and place

  How to transfer pictures from iphone to PC and keep the date, time and place

  Hello Grumpelfuerer,

  Thank you for using communities of Apple Support.

  If I understand your message that you want to import your photos from your iPhone 6 s, as well as for your Windows PC. I would like to save my photos on my computer as well. There are two ways to do this. You can use the iCloud photo library allowing to synchronize photos between your devices or import your photos to your PC using Windows Photo Gallery. This article will provide you with the steps that you can use for both options:

  Import photos and videos from your iPhone, iPad or iPod touch

  Best regards