Alignment between dreamweaver and browser problem

Similar Questions

• Photosmart C4480 - sharing between XP and Vista problems

  I have my Photosmart C4480 connected via USB on my desktop running Windows XP. I have a home network set up between the desktop and my laptop running Windows Vista 32-bit. Sharing works files and the computers can succesfully mutually ping no problem.

  I have the printer to share in XP, but Vista does not see the printer on the network. I installed the printer drivers on both computers.

  I know that's not where he's going, but maybe someone will read it. I called the technical support and spent 57 minutes on the phone and got anywhere, not less than 40 of the 57 minutes were spent in complete silence. The only stage of the tech support rep asked me to do is to download the latest drivers on the laptop, but then me has said he did not install. After 57 minutes, he sent me an email with a link to the plug of the printer. He asked me to read him what it says beside 'Connectivity' which of course was USB 2.0. I had already tried to explain once Mr the difference between a printer wireless and a shared printer on a wireless network. Clearly, he never had the image. After reading the option of connectivity USB 2.0 for the guy, he noted that the printer could not be used on any wireless network. So frustrating. Very, very disappointed in HP technical support. Very, very unlikely that I buy another HP product.

  Someone help me please.

  I'll pass by this very detailed and try to think you don't know what you're doing so that the directions are clear and easy for anyone to understand.

  1. you must first install the printer on the computer on which it will be connected to via USB (Windows XP computer in my example). Follow the exact instructions that came with the printer for best results. The directions are simple and clear and the steps must be performed in the order that they advise for a correct installation.

  2. After you have the printer installed and working properly on your computer, the printer is directly connected to via USB, use the installation CD to install all the drivers on the computer you want to access the printer over your home network (Windows Vista computer in my example). When you put the installation provided in this computer CD click on Install or Setup or anything else that is similar in option you are given in the menu. When you get towards the end of the installation, Setup prompts you either to connect the printer to the computer or to continue and complete the installation without connection. You want to complete the installation without the printer connection.

  3. now that you have all the appropriate drivers installed on computers you want to set up your network. On the computer on which the printer directly connected (computer Windows XP in my case), you want to run the Network Setup Wizard to set up the printer share. In Windows XP, you want to click on start > my network places. This will open the my network places window. In this window on the left side, you should see a few options in the section "network management". Click 'set up a home or small business network. This will open the Network Setup Wizard. You will notice that one of the bulleted items listed for what you can do with a network is "share a printer. Follow and complete all the steps in the Network Configuration Wizard. When you are finished, your network must be configured and ready to go.

  4. now you want to turn on sharing the Photosmart C4480. Once more on the computer on which the printer directly connected via USB (once again, the Windows XP computers in my example), you want to click on start > Control Panel > printers and faxes. In this menu, you should see your newly installed Photosmart C4480 printer. Right-click on the printer and select "Properties". This will open the window properties of HP Photosmart C4400 series. You will notice that the window has several tabs at the top. Click on the "Sharing" tab, select "share this printer" and name the printer in the "share name:" text box. Do not the complicated name. I used "HP C4480" for mine. Click 'OK' to close the window and save the changes.

  5. you need to know what the IP address of the computer with the printer connected directly via the USB port, so that we can ensure that your network is configured correctly and that the other computer (Windows Vista in my example) is capable of good communicate with the Windows XP computer. On the Windows XP computer that is connected to the printer, click on start > all programs > Accessories > command prompt. This will open the command prompt window. Type "ipconfig" and press ENTER. This will show you your IP address, subnet mask and default gateway. Note your IP address. There will be a series of four numbers, separated by three points (for example 192.178.1.2). You can close the command prompt window now.

  6. now you know what the name of the computer is on the network. Click the Start button then right-click on "My Computer" and select Properties. This will open the "System Properties" window You will notice that there are several tabs at the top of this window. Select the "Computer name" tab The name of the tab may vary from one computer to another, but there will be a tab named 'Computer name' or 'Network name' or something similar. Select this tab. On this tab, you will see "full computer name:" and then to the right of that will be the name of your computer on the network (the computer DESKTOP for example). Note that. Click 'OK' to close this window.

  7. now you are done on the computer on which the printer directly connected via USB. Get on your other computer (Windows Vista computer in my example). In Windows Vista, click Start > Accessories > command prompt. This will open the command prompt window. Type "ping IP address" and press ENTER. Put your IP (e.g. 192.178.1.2) where I typed "IP address". It tests communication between computers and display the results when the test is performed. If all goes well, it will say something like 4 packets sent, 4 packets received, 0% lost. If packets have been sent but not received then you have a network problem which must be settled before the printer you will work.

  8. assuming that the ping was successful, you are almost finished. Close the command prompt window. Always on the Windows Vista computer (the computer not directly connected to the printer via the USB port), click Start > network. This will open the 'network '. Now your computer will search and display all present on your network. It may take a minute or two so be patient if nothing appears immediately. Finally the name of the other computer should appear (e.g. OFFICE). Double-click the icon above the name of the other computer. This should now show a list of all that on the other computer on the network. The common things to see here are printers and a "SharedDocs" folder You should see that the listed here HP Photosmart C4480. It is listed under the name you gave to the printer in step 4 above. Right-click on the printer icon and select 'connect '.

  9. This will open the "Windows printer Installation" window and says "connecting to the PRINTERNAME on computername. I don't remember exactly what happens the first time you do this, but it can ask you for installation and others. If so, just follow all the steps, it gives you, and he needs to connect to the printer.

  10. at this point, you are ready to go. You should now be able to open Microsoft Word or another program and print on the printer HP Photosmart C4480 from the Windows Vista-based computer on your network. The Photosmart C4480 will very probably not already set as the default printer so you will have to select in the menu of the print window in the "Printer name" drop It can open a window saying that the computer connects to the printer when you do this. After that when you click on print, your document should be sent on the network of the Photosmart C4480.

  11. If you want to set your Photosmart C4480 printer by default on the computer, it is not directly connected to (Windows Vista computer in my example), click Start > Control Panel. This will open the Control Panel window. Under the heading "Hardware and sound", click on "printer".  This will open the Printers window. You should see the "HP Photosmart 4400 series on ComputerName" icon in this window. Right-click on the icon and select "Set as default printer". After that, you should see a green and white check mark next to the icon of the printer. The Photosmart C4480 is now set as default printer on the computer, and whenever you print from any application will automatically be selected Photosmart C4480 printer.

  Hope all that made sense and solves your problems. If you please, after back and let me know if make you it work, or if you have other questions. I'll be more than happy to try to help!

• network between XP and Vista problems

  I have 2 computers on the private network, an XP and a Vista.

  XP is connected with the ethernet cable to the internet router, Vista with wireless adapter.

  I installed the fix on the XP computer as it appears on the network of map.private Vista network, sharing files on both computers.

  On Vista, I can see and access the shared files on the XP computer. No problem in that direction.

  On XP, I see an old Vista computer network configuration (with an extra disk and other than common shared files) that I can't seem to update.
  XP does not see or update the new configuration on Vista computer and I cannot delete the old configuration (shows "open" or "explore" option only).

  Microsoft no longer supports Live OneCare, the XP computer had Norton and MS security essentials Vista instead.

  Previously, the networking was thin between 2 computers.

  I tried repeatedly to share files on the computer to Vista, but since the changes, sharing does not seem to take.
  Records are marked as shared, but when I check the details, shows only the user account from the vista computer.

  Previously, he showed "everyone" as well.

  Since this is the most obvious difference, I guess the problem is with the settings on the computer Vista, has perhaps to do with the switch to Ms security essentials.

  Any suggestions?

  Hello

  (1) what exactly happens when you try to delete the old configuration? Do you receive an error message?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try the steps from the link below.

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: If the problem persists, then try to adjust your Windows vista computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Windows 7 and browser problem

  must run windows in safe mode with network to have a browser work properly.  using IE and Firefox.  Web site fisting comes in following correctly sites just tab of waiting for web site that this problem appears only when you run windows in standard mode.

  Hi Robert

  Since Internet explore and Firefox works well in safe mode with networking, it seems that some third-party programs or modules may be the cause of this problem.

  We can try the following steps to get this problem resolved:

  Method 1

  We can identify which particular program or Internet Explorer causing module does not work in Normal mode by running the clean boot.

  We can see the following article in the Microsoft KB to perform the clean boot

  http://support.Microsoft.com/kb/929135/en-us

  Note: When you are finished troubleshooting, follow the steps mentioned in the article to reset the computer to start as usual.

  Method 2

  If disabling modules and third-party programs don't resolve the issue, we can try to reset the internet Explorer & check if that solved the problem

  We can try the following Microsoft Fixit to Internet explore that automatically detects the number and fix it.

  http://support.Microsoft.com/mats/ie_performance_and_safety

  We can also manually reset internet Explorer by following the below mentioned steps

  1. close all Internet Explorer Windows and Explorer that are currently open.

  2. start Internet Explorer.
  On the Tools menu, tap or click options Internet. If you don't see the Tools menu, press ALT.

  3. in the Internet Options window, tap or click the Advanced tab.

  4. press or click reset. If you are using Windows Internet Explorer 6, click restore default.

  5. in the dialog box Reset Internet Explorer settings , tap or click reset.

  Select the Remove personal settings check box if you also want to delete the browsing history, search providers, accelerators, home pages, the Tracking and ActiveX filtering of data protection.

  6. when Internet Explorer has finished the application default settings press or click closeand then press or click OK.

  Out and then start Internet Explorer.

  The following Microsoft Knowledge Base article can be returned for more information on this.

  http://support.Microsoft.com/kb/923737/en-us

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  After obtaining Internet Explorer works fine in normal, you can try uninstalling Firefox and reinstall to see if it works.

  Hope that the steps mentioned above has solved the problem, if you need any clarification, or even help please write us back, we will answer you as soon as possible.

  Thank you

• Alignment in Firefox and Safari problem

  OK, I have problems with my site. It works perfectly in IE but in Firefox or Safari, there a problem of alignment on two pages. I tried everything to separate in separate columns, use GIFS for spacing around and line up some left CSS qualities... still nothing. It seems that the two right-hand columns lined up too high. The left column is in the right place relative to other pages. If please check and tell me what you think. The 'other info' and 'Show map' links should be directly aligned with the element corresponding to his left.
  
  URL of the questions:
  http://www.nicholasanderin.com/activities.html
  http://www.nicholasanderin.com/accomodations.html
  
  Thanks for the help.

  Thanks to you two. Observation of Gary has worked for one of the pages. I think I'll try the nested tables to make the work of other one. Thanks for the help!

• Communication between computer and printer problem

  Why can't I print my documents, they go into the queue and do not print?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Please direct me to a comparison between Dreamweaver and Muse

  I used Dreamweaver in the past and never used Muse. Muse looks easy to use and useful tool, but I'm curious to know what you can do in Dreamweaver which cannot be done in Muse.

  Hi Jeff,

  As you mentioned you want to make your site in a quick and less complicated, considering this, I would recommend Adobe Muse,

  It is very easy to learn and also it's built in FTP function available in Muse,

  Please go through this video tutorial for more understanding on muse-

  Adobe Muse CC tutorials | Learn how to use Adobe Muse CC

  Create a sensitive site with Adobe Muse | Adobe Muse CC tutorials

  Kind regards

  _Ankush

• Link between PC and Mac problem

  Hello.  We have 3 Mac running OSX 10.5.x and Adobe Std CS5 and they share their creations of Illustrator, images, etc., on a NAS file server.  Recently, I downloaded the CS5.5. trial version for a PC running under Windows XP Pro and on the same network with the same file access and security.  All machines use CIFS to access files.

  PC user will create an Illustrator file in one of these shared folders on the NAS and the link in images of an another shared folder on the NAS and save.  When a Mac user opens the Illustrator file, however, none of the links are valid for the user Mac is to add a link to these images and re - save the file.  Should what changes I do on the PC side to stop this problem?  Must the PC be on CS5, too?

  Open the file on the mac, in the links palette choose an image missing, and in the links flyout choose infomration link to show you where AI is looking for the file.

  Always happens to each link
  Could be a problem of config on the server with the way directories are perceived by the side mac. The simplest solution is to save the images next to the illustrator file.

  It happens to some links.
  Might be a problem file naming using characters that are not allowed as :/ %-in the name of the file or and linking folder_name.

• Choose between MySQL and Oracle - problem with MySQL text columns?

  Hello.
  
  New to this forum and Oracle please go easy on me.
  
  I'm selecting data in a MySQL database.
  
  This SQL works very well: -.
  Select 'Device_Label' Device"@ed_link «»
  where "Device_ID" = 6665;
  Here, the MySQL Device_Label column is of type varchar (255).
  
  This SQL fails with the error - ORA-00904: "Device_Tag": invalid identifier
  Select 'Device_Tag' Device"@ed_link «»
  where "Device_ID" = 6665;
  Here, the MySQL Device_Tag column is of type text.
  Column Device_Tag certainly exists and is populated.
  
  Is the problem related to the MySQL type text column, and is there a solution?
  
  Thank you.

  Hello
  The ora-997 because of the entry door is not a restriction of the Oracle. You cannot use a table defined as a long in the create table... as select statement..., you would see the problem even if it was a copy of Oracle for Oracle.
  If one of the columns of MySQL are translated as a long in Oracle you will hit this problem.
  The bypass alone is to avoid columns long or you can try to create a view in MySQL by using the cast function, which converts the columns that translate to long something and then use it in the create statement.

  Kind regards
  Mike

• questions of dump Dreamweaver and web development

  Hi I'm new here and I'm totally noob in programming

  I have a few questions

  PS: Sorry if some of them illogical

  Dreamweaver 1 - what to do exactly

  2. what the different between dreamweaver and ip board or smf...

  3 - who is the best

  4 - What ip board exactly

  5-can I use both (dreamwweaver and ip board)

  5. What is the best language for web development (html and css...)

  Thank you very much and sorry for my questions stupid and boring

  How to integrate the forum with tapatalk

  Ask your developer to forum software.  I have no idea.

  2 - who is the best manufacturer of Community Council

  I think that it is very subjective.  Depends on what you need, how much you want to pay, and the learning curve required to use and maintain. Which is better for you is maybe not the best for everyone.  You'll need to shop around and decide for yourself.

  3 What else I need to build a forum/website more than

  HTML

  CSS

  JavaScript

  Depends on the forum software that you decide to use.  If you want a dynamic website of conduct, you will also need to learn programming like PHP & MySql server-side.

  4. can you give me some sources to learn dreamweaver and ip Board

  Dreamweaver Tutorials:

  Learn Dreamweaver CC | Adobe TV

  Intellectual property office, you're on your own.  Check the website of your developer.

  Nancy O.

• Browse catalyst prepared - export between inside and outside as in the catalyst?

  Hello world

  Dear people of Sony, is possible to add a feature to export / trasncoding files between In and Out marks only as in catalyst go? Was surprised not to find, very handy when there is a large file that has two or more WB settings required, to export part of the file with the parameters a, marking the section with inside and outside and then adjusting those yet to export the or other parts of the shooting with an another WB settings?

  I know there is a feature to copy sections of the files ' between inside and outside "only but it would have been more convenient to have it as in catalyst browse my humble OPINION."

  Or is there a simpler workflow that I'm missing out on?

  See you soon

  Max

  P.S. Thanks to solve the strange Maj WB problem that I reported earlier, Travis and team, I have since reinstalled catalyst prepare 2015 and in awe of the capabilities of the software. Great job.

  Hi maximdryginsony:

  Thanks for the question.

  I think the function of catalyst to prepare that can solve your problem is a subset of creation. What you can do is put an In/Out point with a WB setting, and then click Log. Create a subclip (see screenshot). This will create a subelement with the color settings.

  

  -Travis

• site made with Dreamweaver and Fireworks download problems

  I created a site using Dreamweaver and Fireworks (both through creative cloud). When I'm working on files in a program, there is no problem. Even when I preview the files in a web browser, I don't see any problem. Once the site is downloaded, however, a white rectangle appears on the image that shows what page you are rather than the image that is supposed to be there. I have double and triple checked all my work files and I am not find all errors. The homepage is the only page that it doesn't have to. I deleted and re-uploaded twice to see if I may have missed something, and I still have questions. I even rebuilt files. Nothing moves. If someone could give advice, I would be very happy.

  The URL is www.victoriasurliuga.com

  Joint is a picture showing this on a single page.

  

  I see a number of problems.  Not least of which is the fact that there is no REAL content anywhere on this site.  It's just from the images.  Now, consider this.  Images of the text cannot be "seen" by screen readers, translators or indexed by search engines.  If people turn off images to save their mobile data plans, they see absolutely nothing on this web site.  It is very sad and a waste of valuable web real estate.

  I'll assume that you are not a professional Web Designer & Fireworks appeared to be an easy way to make your web site.  But it's a graphical application.  It is not a replacement for software like Dreamweaver or Muse of real web creation.  You have to start over.  Next time use FW for graphics only.  Use DW or MU to build your web pages and content.

  And to answer your question about the missing image.  This path points to the files on your local hard drive that you see.

  file:///users/Danielle/desktop/Surliuga%20Website/home/images/bio_r2_c4.PNG

  Nancy O.

• Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome.

  Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome. Specifically, a large part of Tumblr and Facebook menu has been changed in another language (Russian, I think). I tried reinstall Firefox, clear the cache and reset firefox to its default state. None of them helped. Any suggestions on how to fix this?

  Hey again,

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  I hope this helps!

  Curtis

• Whenever I type the letter between f and h (he can't come in here or the problem occurs, so I will use 'p' instead), the locking of the keyboard and an informal search screen is displayed in the toolbar. Also happeninp in emails and 'my documents' but no

  I can't use a certain letter on my keyboard when in Firefox, email or my documents without the Freezin' screen and a pop up appears in my toolbar for a brousin site. The character I can not type is the letter between f and h in the alphabet. I have no problem with this letter in other applications, so I know that's not the keyboard. How to make and use this letter?

  This has happened

  Don't know how many times

  Is a week by o

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use 'Disable all add-ons' on the start safe mode window.
  You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")

• I'm having a problem sharing back and forth between xp and vista & get the error that I don't have permission to access files

  original title: sharing of Vista with XP

  I'm having a problem of sharing back and forth between xp and vista.  I've set up the sharing, but I still get the error message that I don't have permission to access files

  Kill / disable the Vista password protection option. If you have installed a separate firewall, configure it.