alignment of the tip

Similar Questions

• alignment of the bullets for doc epub

  Hello

  I'm trying to format my paper for the publication of the ebook. I use Pages and specifically the ebook eBook template in Pages. I formatted and re-formatted in the last days to try to get my chips to align properly when I export the doc Pages in epub format.

  When I open the document in ibooks, the balls are not properly aligned. Also, when I download the doc epub for kindle and check the appearance of the epub on various e-readers, the bullets look well on android devices, but not on the (strange!) apple/mac devices.

  I tried everything (stripped the formatting and re-formatted 45 times more). I'd appreciate any help.

  Thank you

  Sunni

  Pages v5.6.1 in OS X El Capitan.

  The withdrawal of bullet of level 1 by default is 0 in and withdrawal of text is 0.2 in.. A dash of level 2 under level 1 using the symbols of dash Panel Format is 0.17 in. and his withdrawal of the text remains unchanged at 0.2 in. resembles what follows in the Pages and give a hope prior to export ePub. Regular time to 12 points. But there is a slight tooth out in iBooks to the dash of level 2. Arrgggh.

  Pages                                                                                 iBooks 1.5

  

  Now, adjust us this indent level 2 to be 0.25 with removal of text. It is not properly aligned in the Pages, but is very close to the iBook:

  

  Just another example of the real cost of using Pages v5.

• Alignment of the mouse in flash-based objects is completely wrong

  Since I installed FF 8.0 I continue to have this problem: whenever I try to use an object flash (, video game, YouTube etc.), there seems to be a problem with the alignment of the mouse: the position of the pointer as part of object is different then in the normal window, which means it's really hard to click, as the video game acknowledges that the alignment of the mouse in the window and not 'virtual' in pointer the game. Previously, FF 7, I have no problem with that at all; I tried to reinstall Adobe Flash Player, but it did not work.

  No idea how to fix this?

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

• 4 is not compatible with the protection of the identity of simple past on my HP using the player with the tips of the fingers. How can I make it work? IE9 works very well. Should I stop using FireFox?

  I have a HP DV7-4165 which has Windows 7 64 bit and simple features of the HP pass identity protection using the drive with the tips of the fingers. My Firefox support says "If you have the Firefox browser on your computer when your HP SimplePass Identity Protection software is installed, a Firefox extension will also be installed which enables support for the use of the fingerprints with the browser Firefox." Once I updated to Firefox 4 it no longer works.

  You can get Firefox 3.6.16 here:
  
  http://www.Mozilla.com/en-us/Firefox/all-older.html

• Alignment of the printer

  my printer is not aligned in the Center, the material being printed.  When I do an alignment, at the end it don't tell me a great success.

  Hello missbill,

  Welcome to the Forums of HP's Support.  I understand that you have a lack of alignment with your HP printer.

  To help you, you please provide additional information:

  1. Number of product/brand/model of printer HP do you have? How can I find my model number or product number?
  2. How is the printer connected (USB cable, ethernet or wireless)?
  3. What operating system do you use on your computer (Windows 7, Mac 10.9, Windows 8, etc.)?
  4. Alignment has already been successful?

  Thank you.

• How to align to the left the url in safari browser?

  I want to align to the left of the uRL in the browser of Safri so the favicons are visible and also if I can edit a long URL

  When the URL is centered, click inside the address bar the address left aligns the favicon showing.

  

  

• For an IMAQ image, how is calculated the size of the area of alignment to the left or to the right?

  For an IMAQ image, how is calculated the size of the area of alignment to the left or to the right? My initial assumption of the diagram

  http://zone.NI.com/reference/en-XX/help/370281M-01/imaqvision/imaq_getimagepixelptr/

  is that the left and right are equal. But that doesn't seem to be the case. Can someone tell me the magic formula? A combination of the border width and the width of the image?

  Thank you...

  Andrew

  Andrew_Scott_SPCi.ca wrote:

  All this appeared when I relalized that the mapss Pixel pointer the value 0,0 point of the image, not the point 0,0 of the largest container with areas of alignment and borders. Would be nice if the drawing in the documentation put it.

  This described in help, is not?

  

  Andrey.

• Align with the graphic point nearest

  I have a chart xy with several points. The graph is controlled by a mouse press event, when the user clicks on the chart, he draws a red circle at the point of click. My question is how I would get this to align with the closest point?

  
  

• feature request - alignment of the execution of the front panel window

  I would like he's had a "pair of coordinates", marked by two positions on the Panel before which would serve the rectangle to display at the top left and bottom right positions itself for my front panel when executing. Then I wouldn't have to worry about the State of my eyes when I left edition.  I could simply mark the limits of the display and be assured that all the controls and indicators that were intended to be seen at runtime, would be visible and properly aligned with the window of the group.

  I advise you to take a look at this blog post, that addresses exactly your problem.

  It is the functions of the toolkit OpenG VI Fit window largest decoration.

  Tone

• alignment of the text in landscape mode domestic xperia

  I installed xperia home 8.1.A.0.8 (later for me, not preinstalled with lollipop 5.1.1 so far no update of 8.0.A.1.2) pitcher my Z3, but mode landscape, there is problem with the alignment of text (or envelope). text (app name) is covered by another icon of app´s.

  

  

  The cause for the missing items, sometimes at a Xperia has been found and it will be corrected in a future update to the phone. Thank you for providing us with the newspapers and the video!

  Is the alignment of the text always like this or is it when the search and menu items are missing?

• Alignment of the boring cartridges disorder - PSC 1510 all-in-one

  Hello world.

  By years, I own a robust PSC 1510 that worked really well for me. the problems started when I bought a new HP laptop (pavilion dv6) with Windows 7 hope premium as the operating system. Of course, I have downloaded the latest driver and software available on the HP support site. and everything was still ok since I had to replace the empty cartridges with new ones. then, as usual, the printer starts automatically with the alignment process: it prints a page with the alignment pattern and then asks you to put it correctly into the scanner and take a normal scan.

  but when I finished it the HP solution center software displays me an error message with the following text:

  "accordare no riuscito since it piano inclinato pulito scansione di", which translated from Italian looks like:

  "alignment failed because the surface of scan results to bow.

  WHAT?

  I mean, I always finished this procedure before succesfully on my old PC. What is the problem now? the scanning surface is absolutely perfect!

  However, after the error message, the printer is perfectly usable. But if I turn it off, the next time I turn it on it always starts again vain alignment, consuming a sheet and ink and give the same error message.

  I tried to fullfill the process of alignment with the USB cable disconnected, but even this way won't solve.

  are there different methods to correct this? can I ignore the automatic alignment process by default (I can do it manually when it occurs)?

  any help appreciated. Thank you.

  I run a 64 bit version of Windows 7 Home premium on an AMD dual-core HP pavilion dv6.

  Have you tried to turn the page to see if that makes a difference? Have you tried shoring from one side of the printer during the analysis of the alignment page to see if that helps?

• Menus are aligned to the right

  For some reason, the drop down menus under Windows 7 (Enterprise edition) are all aligned to the right (normally aligned to the left). I have never seen this before, and it's all about a relatively new installation of Windows. See a screenshot: http://www.hostanyimage.com/files/51145352950874579372.png.

  After some googling, I tried to adjust HKEY_CURRENT_USER\Control Panel\Desktop\MenuDropAlignment to different values, nothing helps. Any help? Thanks in advance.

  For some reason, the drop down menus under Windows 7 (Enterprise edition) are all aligned to the right (normally aligned to the left). I have never seen this before, and it's all about a relatively new installation of Windows. See a screenshot: http://www.hostanyimage.com/files/51145352950874579372.png.

  After some googling, I tried to adjust HKEY_CURRENT_USER\Control Panel\Desktop\MenuDropAlignment to different values, nothing helps. Any help? Thanks in advance.

  Hello

  There are a few problems with this behavior. First of all, if you are clicking very near the right edge of the screen, the drop-down menus will appear left everything simply because there is not enough room on the right side of the menu.

  The other problem is that the parameter 'Handedness' has become corrupted or changed. To change this, follow these steps.

  Press the Windows key + R logo to bring up the run dialog box. In the Open line, copy / paste the following text line.

  Shell: {80F3F1D5-FECA-45F3-BC32-752C152E456E}

  Press OK.

  This will start the configuration of the Tablet PC settings dialog (even if you don't have a Tablet PC).

  Select the other tab.

  In the right-handed/left-handed section, place a check in the option Left Handed .

  Click OK.

  This should place the menus on the right side.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Sections of the alignment of the cartridge D2345 C1 thru 17 map; Lines D1 through the D11 and E1 to E11

  Sections of the alignment of the cartridge D2345 C1 thru 17 map; D1 to D11 and E1 to E11 lines are slanted.

  Replaced the cartridges HP21 and HP22 and same result and then cradle will not move message appears.

  Jammed paper or any other obstacle I see there.

  Running Window XP reloaded the latest versions of the drivers installation and updates.

  Tried to print and copy fate starts well but ends up printing off the page and a tilt.

  Test printing with the HP scan doctor indicates eveything OK.

  Tried to foil alignment after attempting a print and same result, Sections C, D and E tilted.

  Is it Terminal? Do I have to pull the plug and look for a replacement?

  Any help will be appreciated.

  Hello OG53

  It doesn't look good if you receive as many different errors. It doesn't sound like the printer may be on its way. Try the rest of the article below, even if it will deal with transport, which may be causing the cartridges to print at an angle. It doesn't look like a problem with the scanning mechanism both with ink system. You want to be looking for a replacement.

  Transport is stuck and will not move

• Alignment of the center of HorizontalFieldManager in a VerticalFieldManager does not

  using BB JDE 6.0

  Device BB torch

  Simulator for the same

  I have an iVFM(Manager.FIELD_HCENTER |) VerticalFieldManager Manager.USE_ALL_WIDTH), and I have a (Manager.NO_HORIZONTAL_SCROLL) iHFM of HorizoantalFieldManager.

  I have a BMPF1 bitmapfield

  I have a RichTextField RTF1 (RichTextField.TEXT_ALIGH_HCENTER)

  I have added the fields to iHFM

  iHFM.add (BMPF1);

  iHFM.add (RTF1);

  I added the iHFM to the iVFM

  iVFM.add (iHFM);

  the bitmap field corresponds to the far left and the remaining space is occupied by the rich text field with the text aligned in the Center. I tried without TEXT_ALIGH_HCENTER, yet the bitmapfield is at the end left and immediately followed by the text of the RichTextField.

  How to align the center of iHFM horizontally in the iVFM?

  Have not tried this, but you may be lucky if you set the style on your RTF as USE_TEXT_WIDTH where the RTF is expanding to the entire width of the available space and which actually look like everything is left aligned when it actually happens in the whole of the entire screen.

• "show the alignment of the antenna-dot11" shows the bug in JA1 12.4 (25 d) for AP1262N

  Hello

  We have a couple of AP1262N-E-K9 AP with firmware version 12.4 (25 d) JA1 operating in conceerne mode.

  I tried to measure the quality of the signal between access points by a Repeater mode adjuster while all others are in root mode. Then I run the following command:

  dot11 Dot11Radio 0 - the alignment of the antenna

  Connected via the cable from the console, the following output is displayed:

  #dot11 AP Dot11Radio 0 - the alignment of the antenna

  Type escape sequence "control ^ ' to abort.

  Response of 64d8.1486.f000 Signal-24 dBm

  [...]

  Response of 64d8.1486.f000 Signal-25 dBm

  * 1 Mar 05:13:59.953: % DOT11-4-UPLINK_ESTABLISHED: the Interface Dot11Radio0, associated with 64d8.1486.f000 AP AP03 [no Wpa2 PSK]

  However, being connected via SSH:

  Dot11 AP # dot11Radio 0 - the alignment of the antenna timeout 2

  Type escape sequence "control ^ ' to abort.

  Type escape sequence "control ^ ' to abort. Timeout in 1 second.

  Obviously, there is no action displayed during the scan.

  So it must subsequently use the command 'show the antenna alignment' to get the values measured signal strength:

  AP00 #sh alignment of the antenna-dot11

  64d8.1486.f000 answer 25% of Signal 0 dBm

  [...]

  64d8.1486.f000 from 22% 0 dBm Signal response

  There are two problems:

  1. the output to 'see the dot11-alignment of the antenna' is incorrect, the value of % represents the signal strength in dBm without - (least). For example "-25 dBm" appears as "25% signal 0 dBm.

  Now, I know that this is only a display error, but it is still not clean. Is this a known issue?

  2. why the values of measured signal strength appear not on the SSH console during the test of the alignment of the antenna?

  Is it compulsory to use the console to see these values? Or is it also a known bug that could be fixed in the latest versions of firmware?

  Thank you for your support.

  Often, this command is used for real bridges and when you're on the roof trying to align its usually from the console. If the output should vary between a console and a ssh session, no.... You are in the CLI anyway.

  Your better off opening a TAC case on it because it looks like a bug of cosmetics.

  Sent by Cisco Support technique iPhone App