feature request - alignment of the execution of the front panel window

Similar Questions

• Connection monitor extra/DVI-I connection EVS-1464 (showing the front panel)

  Hello

  Developing a Vision System using the following:

  • LabVIEW 2010 SP1
  • LabVIEW 2010 SP1 real-time
  • Vision development 2010 SP1
  • EVS-1464

  My question is:

  How can I view my front panel, running on the Exchange virtual server on a monitor connected to the DVI - I output of the EVS-1464?

  Thanks in advance!

  Roy

  Hi Roy, I'm not sure if actually read Hossein that KB or not, but she deals with the display on the front panel on the network on a Windows computer, not on via the connection of the monitor on the Exchange virtual server running LabVIEW RT.

  To answer your original question, no, it is not possible to look at the façade of standard LabVIEW on the RT system today. All the code used to display all the buttons on the Panel before the user interface, controls, and indicators are simply not present in LabVIEW Real-time and is only visible on a separate computer that is running the development environment or by using a web browser that has the plugin installed LabVIEW.

  Have a display of the UI on RT is certainly a requested feature and it would be available someday. You can see this request: http://forums.ni.com/t5/LabVIEW-Real-Time-Idea-Exchange/Real-time-display/idi-p/1391108 . He has some good ideas for what other alternatives exist today also.

  However, it is a way to use the monitor on the Exchange virtual server and other LabVIEW RT systems output. Module Vision Development includes video RT on the screw that can display any image on the connected monitor. You can either display images captured from cameras or images custom overlay text and simple graphics objects (lines, circles, rectangles, etc.). It is certainly more effort than normal front panel editor in LabVIEW but it could be adapted to your needs if you want some things to be displayed. You will of course have no mouse/keyboard so that you cannot interact with any display of the elements directly.

  Eric

• How to add a record button on the front panel to save waveform data

  Hi, I'm new kind of LabVIEW and I worked on a code for an agilent oscilloscope communicate via GPIB and so far it works well on the collection of these two analog channels one by one, "Not UNLIMITED" but it does the trick (vpp, Vrms, frequency, etc.).  I've added the feature to add data to a .csv file waveform (problem: opens a dialog box until the user gathers all the data.) Solution: I want the user to save the. File CSV whenever he wants to use later on the front panel). I've added another feature to get a snapshot of the curve waveform (problem: opens a dialog box.) Solution: I want the user to save the JPEG file, whenever he wants to take a snapshot ("take snapshot" button on the front panel)).  I work with the agilent hp54645d driver. I have attached my code, if someone can tell me please how do I do this (maybe cabling and structures are solutions do not know). Thank you in advance.

  I would recommend adding a case structure just around the two record VI and a button to check the condition of the structure of each case. If you want a button to control both save functions you can put the two record functions in the same structure of business controlled by a single button. You are right in saying that the loop will cause your code runs until the stop button is pressed or until the stop condition is met. If you are wanting the while loop to stop once the recorded information you can use the button that you use to control structures case to also stop the while loop. I hope this information helps.

• A button on the front panel reset

  I use a record button on the front panel, in the mode "change when you press on. I have run the VI, then press the record button. After having intercepted the VI, the button lights. How do the button return automatically to the OFF state during execution of the VI next time?

  Set the property to "False" node, it will reset.

• Is it possible to call a .exe (non-LabVIEW, such as Notepad) in a child windown on the front panel?

  I would like to launch a stand-alone .exe inside the front of my VI.  It is a piece of software by the provider of a sensor that I try to incorporate in my VI.  I was able to find how to call the .exe using the .NET constructor and invoke nodes.  However, the application opens in its own window.  Is there a way to run from a child window within the façade (ideally, within a tab on the front panel control)?

  I'm in LabVIEW 8.6.

  Thank you.

  smercurio_fc wrote:
  I don't think that it actually works. My understanding is limited about this feature, but since I read it only works with the pop-up windows and windows that are already children. The application's main window is not a child window.

  I've done it before.  I have attached a simple example using Notepad.  Make sure that the notebook is already open no open files.  Since the example is not the position of the child window, the position relative to the window will be the same, because it is off the desk.  So, make sure the upper left corner of the Notepad is close to the origin of the desktop computer.

• Best way to reset all controls on the front panel except one?

  Hello world

  I have an interesting problem, whereby I need to run successive tests using a test station which has several indicators on the front panel. At the end of each test, I need to reset all to default values, with the exception of a control (Test ID) who needs to keep his information - its value is used in an initialization status for test to ask for information from a database, so it can not be reset with the rest controls.

  I post all orders at a time using a reference ThisVI and VI Default Vals.Reinit All method, but this will obviously reset my control values (Test ID) as well. Any suggestions on how to keep properly or may store this information control while resetting all others. I can reset individually others but there is a little and more can be added as this system is developed.

  I don't really know what is the right way to proceed, and Labview has maybe one trick in his bag that I know to work around this problem.

  Thanks in advance for your suggestions,

  Alex

  Flank the node invoke with two nodes in the value property of the control to maintain the value. To the left we read as well as a right and the wires together. Connect three nodes with a thread of error to establish the order of execution.

  First reading place value on the wire, which is then written after the values have been reset to the default value.

  

• Sub - VI does not open (error 3 could open the front panel)

  I work for the VI (the version of Labview 2011 trail), I created a Subvi. At the same time, I opened this Subvi to adjust terminals connection - what I've done before - and after saving the file and its closure, the Subvi is remained unadjusted. In fact, I am not able to open the Subvi more. And when I want to open the file in a VI (e.g. running VI in windows), I get "' load the error code 3: could not open the front panel." "

  I can't also preform any task for example the recording of the main program for an older version, because this Subvi is present in the program.

  Nevertheless, the VI still works as a Subvi in the mainprogram I wrote - in how it worked until I adjusted the connection terminals.

  Is it possible to solve my problem without having to rewrite the entire Subvi? The Subvi about is attached in this post.

  I thank in advance

  PS. After the closure of Labview, it sends an internal report of the caveat.

  Hi all

  I added this issue to an existing bug report (what we call a request for Corrective Action); There was one reported with Labview 2010. I added this matter to him. The reference of this application is CAR #251753. With this reference, you can always ask the status of this bug report.

  Best regards

• Disabling the controls on the front panel

  Hello

  Currently, I am working on trying to disable/gray out between 10-20 controls on the front panel when you press a start button and then allowing them the end of the test. Currently I use the property nodes, all of which are connected to a constant of the State in which I want that works perfectly. My question is that there is another way other than having a bunch of knots of padding property to the top of my structure of the event. Ive read where people had Subvi, which has used references to make this same feature, but is there a way of doing things in the block diagram of my current VI? Thank you!

  Need references of your controls on the front panel, so this can be fast, because you can select more than one, and with a right click you create references.

  I have attached a version LV2010.

  Edit: another review:

  Must be created only once these references. Usually, it's comfortable group all the references in a cluster, use this thread through your entire code. This way you can just ungroup references to the actual location, you have to play with, put them in a table and use the above FOR loop to change their properties...

  Like this:

  

• Want 5530: want to scan from the front panel of the printer computer

  Hello

  I am not able to use the scan to computer function from the front panel of the printer to a PC recently updated.

  On the front panel, I press 'Scan', then 'computer '. The name of the computer to which I want to scan is listed, so I select it. The scan preview screen appears then I press 'analysis '. After a standby display told me that the computer does not have to check the cable, etc...

  The PC is turned on, and the connected user.

  Printer is connected directly to the PC via USB cable.

  PC operating system is Windows 64-bit 10.

  Printer is 5530 want all-in-one.

  HP Print and Scan Doctor no problem.

  I tried with a disabled firewall.

  I uninstalled and reinstalled several times (using a new download of HP).

  When I open the printer software 'manage the scan' is not listed (only the Scan item is 'search for a Document or a picture", that works).

  Test page will print from PC.

  Another PC (running Windows 8.1, connected via a network) seems to work.

  Any suggestions?

  Hello

  Thank you for using the HP Forums.  You can try this:

  Please uninstall and reinstall the software COMPLETE features, follow these steps:

  1 uninstall the software from your computer

  Try this program to uninstall Microsoft

  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...

  2. download and save the software COMPLETE features (do not install online)

  The following resources will help you:

  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  3. install the FULL feature software "saved".

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  If you are installing via a USB connection, connect the USB cable only when prompted by the software.

  Let us know if it works!

• Binding the controls on the front panel programmatically

  It seems that Programmatic binding the controls on the front panel do not work when they are located in a tab control.

  Is this a known problem in LV 8.6?

  If the control of the façade is already bound to a URL of PSP you can link to another URL using DataSocket URL property during execution of the VI.

  

  If the front panel control is not bound to a URL of PSP, then you cannot attach it to the URL of the PSP when the VI is on. You can use the method AttachDataSocket of VI to change the link while the original VI is stopped (in edit mode).

  

• HP EliteDesk 800 G2 Small Form: The front panel audio connector - this only made type to use for headphones and microphone

  Hello

  I am trying to determine what type of audio 3.5 mm plug to put into the connector on the front panel for the use of a headset to make video communications.

  could be - sleeve, ring and end cap (mono audio and microphone)

  or

  could be - sleeve, ring, ring and tip (stereo sound and microphone)

  Having read through the manuals and nothing is said on the type to use.

  Hello world

  Just plugged the connector 4 poles on my headset combination for my mobile phone (cellular) and the box of pop - up asked me to select headset or microphone - no selection for both.

  Looks like the right sleeve is for headphones only, and the left one is for headphones or micro - selectable by the user and not the two on a single sheet.

  Everything explained by the practice - but not the paperwork in the manuals.

  #5 for microphone or headset - menu popup is displayed after you insert a 3.5 mm plug to select that one but not both at the same time.  (So I can't use my headset to phone)

  Thank you

  Son

• WANT 411c: MFP ENVY 411c lights on the front panel

  I find anywhere a note detailing the two LEDs on the front panel of the printer.  Of course, the left is the power light and the Start button / stop.  The other, 1/2 "to the right, has an icon as the icon of WiFi or wireless, or whatever it may be as an antenna with a radiating signal left and right of it.  What is this for?  It seems that there is a hole below and to the right of the symbol, but nothing ever shows up.  I turned off the wireless and turn it back on and or State shows a light here.  I reinstalled the software checks to see if that mattered and it made no difference.  I also unplugged the router and the printer, and that has not changed anything. It is connected to my wireless network and works very well.  What this has to do with some additional services such as ePrint?  I just lost some of them September 1, 2016.  Perhaps the only light when something just one of them?

  Hello

  That your work as expected wireless connection, there no problem with the wireless printer, just with his lamp wireless card.

  The lamp to indicate the wireless connection is turned on and must turn on once connected wireless.

  They have nothing to do with ePrint or any Web service, it must turn on once connected to a local wireless network.

  As you mentioned that you are connected and the printer maintain a wireless connection, it's probably just a blown bulb.

• Presentation of connector to the front panel DC7700

  Hello

  Cannot find the necessary schema in the database to support HP I hope someone on the forum can direct me to the table of connector on the front panel of the system (format minitour Convertible) DC7700 Board; It is available to the pins that tells me where to connect the various switches, LEDs etc on a new case.

  Any advice welcome.

  Peter

  FOUND IT!... in a previous post of the forum [see '' info DC 7700 Convertible Minitowers (CMT) motherboard?']  Among other things - who - shows that I had not scanned the tech Ref guide closley enough!  ;~[

  And thank you "mdscole" to highlight the trail.

  ;~) !!

• e9180f: removal of the front panel? e9180f

  Hello, I need to clean my power swith (on the upper edge of the front panel) due to a spill of food products.  I have a side removed by removing a screw in the back and then dragging to the rear of the side panel. I don't remember if I already had the cabinet apart one more than this. The front panel can break, but I fear I will "break the BAD thing. I'm sure that WD - 40 or other cleaner used by switch electronic only should be OK. Thank you all for help.

  Please see HP document "remove the front cover HP Pavilion elite e9000, HPE-100 series desktop computers" for instructions on removal and replacement of the cover.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Satellite A200-1N1: "Satellite" LED on the front panel does not light up

  Hi people!

  I noticed that my LED with the word "Satellite" on the front panel lights.

  You have all the hypotheses on the causes?

  Hi Maresha,

  The front 'logo' LED is enabled or disabled using a BIOS "Display front Logo" option that can be set on IT or OFF you need. Access your BIOS settings (F2 at startup) and check that this setting is set to 'ON '.

  Kind regards