alimentatore per SERVER DELL PowerEdge 1800

Similar Questions

• Upgrade of ram per server DELL PowerEdge 2950

  Buongiorno,

  necessitiamo di assistenza per UN PowerEdge 2950 venduto a nostro client nel 2008, by cui ormai fuori co (he e S/N FJ0C34J).

  It client vorrebbe fare della di 16GB ram upgrade.

  In attesa di risposta, in want pre-empted by attenzione

  Buongiorno,

  Unfortunately no vendiamo più banchi di memoria per questo modello di server.

  Who can find I banchi di memoria currently available alla vendita.

  Accessories.euro.Dell.com/.../genselector.aspx

  Marco

• Step to convert the current Dell PowerEdge 1800 server in Esxi 4

  We have production server, which is Dell PowerEdge 1800 with Windows SBS 2003 with 3 hard drives in RAID. And then, we want to make this server as VMware Esxi 4 with the same Windows 2003 SBS server. We will replace the 3 new hard disks, but new readers are not the same as the old disks. What is the right next step? Because it comes to the production server, we cannot lose all data.

  1. use VMWare vCenter Converter to convert the current Windows 2003 SBS to VMWare workstation

  2. Replace with 3 new hard drives and install VMWare EsXi 4 CD

  3 use VMWare vCenter Converter to load WMWare workstation image into the new server Esxi 4.

  Please let me know if this is the correct order? Is there a risk? Thank you!

  Welcome to the community - that sounds about the right order =

• Request preventivo sostituzione card mother server Dell PowerEdge R610

  Buongiorno,

  Abbiamo need di UN preventivo per sostituzione card mother relative al server Dell PowerEdge R610 fuori co Service Tag GGFN25J.

  Restiamo in attesa di una vs cortese risposta.

  Todas

  Alberto Daponte

  IBN Savio Srl

  Buongiorno, the sto contattando via e-mail.

• Card LaCie esata PCI card on windows 2003 server Dell poweredge T410 error code 10

  Hi guys, I am trying to install a new card Lacie esata PCI card (http://www.lacie.com/products/product.htm?pid=11217) on windows server 2003 on Dell poweredge T410. Windows detects the card and install the driver, but then, it shows an error code 10 "device Can not not started. I tried the update, uninstall, reinstall, adding Lacie driver CD through the "Hardware Wizard', chaning PCI card slot by 4 to 1. But nothing has worked. So please let me know if you think that there is a fix for this solution. Thank you

  Hi Rlap,

  The question you have posted is related to Windows Server and would be better suited to the TechNet Discussion groups. Please visit the link below to find a community that will provide the support you want.

  Windows Server Forums: http://social.technet.Microsoft.com/forums/en/winservergen/threads

• Windows 7 on the server Dell PowerEdge T620

  Can I install Windows 7 on a Dell PowerEdge T620 server with these specs?

  Card mother TPM

  Intel Xeon 2.00 GHz E5-2620, cover 15 M, 7.2GT / s QPI, Turbo, 6 c 95W

  Chassis with up to 8, 3.5 "hard drives of type Tower

  1333 MHz RDIMMs 1

  8GB RDIMMS, 1333 MHz, low-voltage, Dual Rank x 4

  Intel Xeon 2.00 GHz E5-2620, cover 15 M, 7.2GT / s QPI, Turbo, 6 c 95W

  600 GB 3.5 inch 15K rpm, 6 GB/s SAS Hot Plug hard drive

  PERC RAID controller integrated H710, Cache 512 MB of NV, full height

  16 x SATA DVD + /-RW Drive (with RAM) for Ms 2008 R2

  Worst case, you can resell, install a server on it, operating system etc and put it in your living room to show off :)  The case of CaseLabs looks cool, but you'll have to do the same kind of work at home get compatible (and inter compatible) parts for it.

  As I said, there is a good chance that everything will be installed and working fine... just to prepare for the unknown, when venturing off the beaten path.  If you have someone knowledgeable who can at least get you headed down a direction where there is a visibility for success, it would be useful... good luck!

• DELL PowerEdge 1800 Raid SCSI

  Hello!

  At the moment im dealing with a DELL PowerEgge 1800. It is used for BS that development issues - not a productive machine. Performance problems caused by SCSI for Dell Perc 4 controllers are well known, according to me. This is exactly my problem.  :|

  Attached to the Perc 4 there are 4 pcs. 146 GB pluggable hard drives to hot home. I want to change the Perc to something with more performance - but without changing something to minimize costs.

  I'm not able to find something suitable in the HCL for ESX4 (which is not to say it is not written there...). I need a single channel U320 raid controller with PCI - X or PCI-E interface. I Don t mind if it is not listed in the HCL (server is for test and dev only)-he comes to work.  And need a fairly cheap controller card.

  At first I thougt on an Adaptec 29320-R. But I read that this type of controller only is not supported by ESX 4 more because of the 64-bit compatibility.

  So I see two ways:

  1: find a suitable map (see above). Someone at - it ideas?

  2: return o ESX 3.5 because they could be more controllers can be used in this scenario. The 29320-R can be used here?

  THX in advance for your ideas...

  Martin

  In the compatibility section of material from the VMware site... ([http://www.vmware.com/resources/compatibility/search.php?action=search&deviceCategory=io&productId=1&advancedORbasic=advanced&maxDisplayRows=50&key=&release] = 13 & datePosted =-1 & partnerId = 4] & [] ioTypeId = 1 & manufacturer [] = - 1 & vid = & did = & svid = & ssid = & rorre = 0)

  Site of Adaptec 29320ALP card supports support RAID 0, 1, and 10 only.

  The card 39320 is also listed in the HCL

  With several controllers Adaptec SCSI RAID more listed, you have to choose between. I am assured to seek those who would compatible with ESX/ESXi4 u1, but as far I can see, at least compatibility version 3.5.

  At this point, you will need to search with the features really, you need and a price you can get purchased cards.

  VCP4

• Mio Server DELL PowerEdge T310 parte non più [MS]

  Buongiorno,

  Server of it our PowerEdge T310 con only 12.1 OpenSuse, e crashato e non più riusciamo a farlo centred.

  He nostro e HDD in raid 10.

  He codice di che viene riportato e error:

  i8042 no controller found.

  POI cerca di do lo start di a startup fast di linux.

  Diagnostica seems to che Attraverso I brain siano intatti e che no, siano if HW.

  Attendiamo sua risposta.

  Grazie,

  Simona

  Salve,

  Dal tag Bolivia vedo che configurazione del sistema e senza controller raid by cui he #10 di cui e parlate raid raid software made dall'OpenSuse, oltretutto error i8042 no controller found e a di d led to the linux kernel error.

  Per quanto far nostra assistenza, in questo caso specifico, this exclusively di problemi hardware che occupiamo da quanto da voi sembrerebbero no esserci reported.

  Nel caso abbiate non ancora efffettuato the material diagnostica consiglio di effettuarla quanto prima, nel caso, invece gia sia stata effettuata e this non siano would be if he caso che vi rivolgiate ad a sistemista by the riparazione/ripristino del operating system linux.

  Speaking saluti

  Manual

• upgrade brain Server DELL PowerEdge T320 Service TAG: 50JJF62

  Salve,

  MI servono due per questa macchina brain.

  Q.TA 2 x 2 TB near Line SAS 3Gbps

  oppure

  Q.TA 2 x 2 TB, near line SAS 6Gbps

  Saluti

  Riccardo

  Buongiorno, di upgrade development cars required by it business service.

  Questo forum if occupied della risoluzione di guasti per sistemi fuori co.

  Todas

• PROBLEMI WINDOWS SERVER 2012 R2 SU SERVER DELL PowerEdge R210 II PUMPS

  Ho downloaded the Immagine ISO della versione di prova dal portale di microsoft di Windows Server R2 2012, accendo it server accedo went fruit F10 by prima cosa ho tried a rates come sorgente CD my it sistema mi international it following message "do not find the catalog file. Make sure that the catalog Windows (R) and Dell (TM) update packages for Windows (R) are userd' o tentanto Reed selezionando FTP my it sistema mi international it following message "updates that you are trying to apply are not up-to-date approved from Dell.

  Potete darmi directions in merito. Grazie

  Buongiorno, io ho asked su information come procedere... No ho asked UN preventivo di spesa

• Server Dell Poweredge 2950 break [GRO] disco

  Buonasera,

  abbiamo UN Server come in oggetto, tell UN disco o nn adapter rotto.

  Come we can turned out assistenza e preventivo?

  This extremely UN tecnico.

  Grazie

  Rimaniamo in attesa di riscontro VS

  Salve,

  the sto contattando by mail

  Saluti,

• Dell Poweredge 1800 Raid 5 accidental removal of the HARD drive

  I was trying to see the type of Raid HARD drive I wanted to upgrade the server. Out-of-disk HARD 3, 2 were disconnected. I turned off the server and then reconnected the HARD drive. The Raid is currently offline. It displays 00, 01 are missing and 03 as connected.

  How can I get the raid, data are crucial and I know if I have INIT all data will be lost.

  Then you will need to enter CTRL-R, highlight the PERC controller in the upper left corner of the VD MGMT screen, foreign and import.  Then see if your boots OS and your data is accessible.

• "lack of Member" PERC server Dell Poweredge 2500 3/di start table

  Help!  Beginner in need of wisdom.  Knew lot of two drives (one in each table) until you restart.  Notice the message in the BIOs and changed the discs indicated without DISCONNECTION.  We rebuild with problem but that of the table of the BONE (0) will not rebuild.  Cannot figure out how in the world to access the controls for the system to know that the drive has been changed.  This system works, just slow down (half the readers in this table).  Management software has not been installed correctly and it is old.  IT Assistant is obsolete, but does not open and the one who took his place is not present.  I get a message that says that the table server is not installed.  I know, it's a nightmare.  Is there a brave soul who pities the old man trying to help?  I'm ready to learn, but have a long way to go.

  Theflash1932 thank you very much for your answer. My God richly, bless you and yours. Management software has not been loaded and in addition, we examined more problems arise. We have abandoned the old server and doubled these functions on a newer server already deployed. Thank you for your willingness to help. Keebo

• PowerEdge 1800 Server

  I have a Dell PowerEdge 1800, which has worked very well for 10 years, and I intend to replace it in the fall.  Last night, something happened and the motherboard got a little warm, and the system is dead. I found a replacing MB and was looking for a new power lift the thing and get some flexibility to order a new one and get it all moved on and running.  Dell has no idea about food, and I'm tired of doing tossed.
  Is anyone know by chance the part # for this power supply?
  I am trying to order it so it will be there tomorrow or the next day and I don't think even afer of power supply I found a MB. I started thinking about it after that I came home.

  Help!

  GD323 and U2406 numbers... There may be other parts numbers, all interchangeable and compatible inter.

  https://www.Amazon.com/Dell-0GD323-PowerEdge-non-redundant-supply/DP/B00686KCOO/

  http://www.memory4less.com/m4l_itemdetail.aspx?Itemid=1440027556&PartNo=0U2406

• Server Tower Dell PowerEdge T110 II

  Hello

  For server Dell PowerEdge T110 II Tower

  If I choose

  Microsoft (r) Windows (r) Server 2008 x 64 R2 SP1 Standard Edition(5CAL), FI, S-Chinese [included in price]

  as the operating system, why then I an error like

  The version of Microsoft Windows Server 2008 R2 SP1Operating system was to have 40 GB or 80 GB maximum hard Drivepartition. To solve the problem, please use the links provided.

  choose which hard drive configuration?

  Kind regards

  Once you go to the section "Installation of boot (to Windows (r) OS only) Partition" and select 40 or 80 GB partition error you are referencing disappears.

  Let us know if you have any other questions.