All components are similar in Flash IDE of CC (they look ok when it is compiled)

Similar Questions

• NSS4100 RAID DOES NOT START, please check that all components are present

  Hi, NSS4100 storage system could start the raid10.

  The message is:

  --

  The RAID boot failure
  Please check that all components are present

  --

  All disks are present, as you can see in the picture as an attachment. The system has been restarted twice. Is there a possibility to start the raid without losing data?

  Thank you, Dan

  There number so that you can configure for RAID Array (JBOD, RAID0, RAID1, RAID5, RAID5 + Spare and RAID10). I read your posted, the system configured for RAID10. RAID10 is operated like a pair of mirror of data.

  Here are a few RAID array information:

  (1) JBOD (no data protection, when your drive is bad.) You have lost all the data). The notion of read/write date is the same for PC. Fast at the beginning, but the data you have on the disk, it will eventually slow down.)

  (2) RAID0 (no data protection, however, to write the disk data is better in performance. A drive is dead, then the data is lost)

  (3) RAID1 (data protection. A drive is dead. Others always in activity and degrades performance.)

  (4) RAID1 + Spare (Similarly for RAID1, just an automatic rebuild RAID1 for when a drive broke down)

  (5) RAID5: (Protection of data. Minimum of 3 disks. Authorized a disc goes down)

  (6) RAID5 + Spare: (data protection. Need 4 drives. Auto regeneration when a faulty drive)

  (7) RAID10: (Protection of data. Working together with the disc into the slot 1/2 is first pair and disks in the 3/4 Groove is the second pair). This is important because the disks in the Groove 1/2 cannot be placed on the slot 3/4 if she already had the information RAID10. Error I've seen since the GUI is like to drive may have been moved or exchanged around unintended.

• all components are empty

  Windows 8 and Thunderbird 31. When I run Thunderbird it comes up with the bar menu and tools, but shutters are white. The error console has the following error:

  TypeError: windowFrameColor is not defined from 17/08/2014-17:08:25
  Resource://GRE/modules/Windows8WindowFrameColor.jsm line: 25

  When I click on the line of the resource, it opens a file with line 25A highlighted:

  let windowFrameColorHex = windowFrameColor.toString(16);
  

  Here is the content of the file:

  / * This form of Source Code is subject to the terms of the Mozilla Public

  * License, v. 2.0. If a copy of the MPL was not distributed with this
  * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
  

  "use strict";
  const {classes: Cc, interfaces: Ci, utils: Cu, results: Cr} = components;

  This. EXPORTED_SYMBOLS = ["Windows8WindowFrameColor"];

  Cu.Import ("resource://gre/modules/Services.jsm");
  Cu.Import ("resource://gre/modules/XPCOMUtils.jsm");
  Cu.Import ("resource://gre/modules/WindowsRegistry.jsm");

  const Windows8WindowFrameColor = {}

   _windowFrameColor: null,
  

   get: function() {
     if (this._windowFrameColor)
       return this._windowFrameColor;
  

     let windowFrameColor = WindowsRegistry.readRegKey(Ci.nsIWindowsRegKey.ROOT_KEY_CURRENT_USER,
                                                       "Software\\Microsoft\\Windows\\DWM",
                                                       "ColorizationColor");
     // The color returned from the Registry is in decimal form.
     let windowFrameColorHex = windowFrameColor.toString(16);
     // Zero-pad the number just to make sure that it is 8 digits.
     windowFrameColorHex = ("00000000" + windowFrameColorHex).substr(-8);
     let windowFrameColorArray = windowFrameColorHex.match(/../g);
     let [pixelA, pixelR, pixelG, pixelB] = windowFrameColorArray.map(function(val) parseInt(val, 16));
  

     return this._windowFrameColor = [pixelR, pixelG, pixelB];
   },
  

  };

  If anyone can help with this?

  This was reported at least 2 other users I know. Their solution was to revert to the version 24.6 until they fix version 31. He has problems at the moment.

• An Execute method after a fragment components are instantiated

  Hello
  
  I would like to know how to run a fair method after a fragment of the page is loaded and its components are instantiated.
  
  My use case is: I want to run a 'disableAllInputComponents' method that iterates all the elements entry and modify their attributes 'disabled' to 'true '.
  
  I tried to replace the 'refreshRegion' method in the ComponentClass, but it does not work. The components are not yet instantiated. It's the same problem when I run the service in the Get accessor of the layout parent (a form of panel presentation).
  
  Can I use a variable "readonly" in a pageflow scope and check its value in each of the components of each fragment with an EL Expression, but I would like to know if it is possible to have a generic function that I can apply to all forms.
  
  I work with JDeveloper Version 11.1.2.3.0.
  
  Thank you
  Alain S.

  Hello
  You can override a method isAttributeUpdatable

  Check this thread: {: identifier of the thread = 2236147}

• Need an event to find out when my components are no longer displayed

  Greetings!

  Funny that it is difficult to make such an obvious thing GUI development.

  I have a series of custom components in a viewstack. When one of them get away because the user clicked to see another component, it should be able to know that it is removed! Or at least, there should be a 'aboutToBeDisplayed' event so that it can reset its content!

  These obvious manifestations are in Java, MFC, QT, etc... But I can't find it in Flex!

  Any help would be appreciated!

  When a viewStack changes, the components are not explicitly added or removed.  They are just hidden and displayed.

  You can do things with the show and hide the event:

  http://www.Adobe.com/LiveDocs/Flex/3/langref/MX/core/UIComponent.HTML#event:show

  http://www.Adobe.com/LiveDocs/Flex/3/langref/MX/core/UIComponent.HTML#event:hide

  With a ViewStack, you can also use the change event:

  http://www.Adobe.com/LiveDocs/Flex/3/langref/MX/containers/ViewStack.HTML#event:change

  According to your specific needs, some may be better suited that relate to the components being added or removed from the scene:

  http://www.Adobe.com/LiveDocs/Flex/3/langref/MX/core/UIComponent.HTML#event: Add

  http://www.Adobe.com/LiveDocs/Flex/3/langref/Flash/display/DisplayObject.HTML#event: added

  http://www.Adobe.com/LiveDocs/Flex/3/langref/Flash/display/DisplayObject.HTML#event:addedT oStage

  http://www.Adobe.com/LiveDocs/Flex/3/langref/MX/core/UIComponent.HTML#event:remove

  http://www.Adobe.com/LiveDocs/Flex/3/langref/Flash/display/DisplayObject.HTML#event:remove d

  http://www.Adobe.com/LiveDocs/Flex/3/langref/Flash/display/DisplayObject.HTML#event:remove dFromStage

• Ensure that all components work

  How can I check if all components are working properly?
  I did the running image DB and AbbBatch seems to connect to the DB. Now, how can I check if PIA and Tuxedo work correctly?
  
  I ask because I have a message when opening http://pia_imagename:8000 / ch
  The application server is down at the moment.
  CHECK THE LOGS OF APPSERVER. THE SITE STARTED WITH INTERNAL DEFAULT SETTINGS, REASON OF: bea.jolt.ServiceException: invalid Session
  
  Published by: Ivan Levendyan, November 12, 2009 01:48

  Ivan,

  On the server App package, the default domain name is APPDOM, hosted by psadm2 user.
  In all cases, you must make sure that your db connection works before running the Appserver.
  Try:

  sqlplus sysadm/SYSADM@YOUR_DB_NAME
  

  If this does not work, edit the file /etc/tnsnames.ora (owned by root) according to your DBNAME.
  Attention, somehow, in this tnsnames.ora, SID = is used, replace it with SERVICE_NAME =... In addition, the SERVICE_NAME is the form of YOUR_DB_NAME.corp.peoplesoft.com, you could confirm by executing the following on the database as user oracle server:

  lsnrctl status
  

  Nicolas.

• Flash IDE components in Design Mode of Flex 3. Can they be visible here?

  Hello

  IM Explorer Flex to get a grip on its concepts and am currently looking into building components in the Flash IDE. Although I suppose that its likely that when you are more familiar with Flex you produce your components in Flex, as I said Im exploring its concepts and would like to know where and how the IDE Flash fits into the work.

  I made a simple component Flex in the Flex IDE, which shows well, when I run the Flex project. But it does not show in Flex Design Mode.

  I exported the Flash as a SWC component and added the SWC to the Flex library path. The symbol in the Flash IDE extends UIMovieClip. Now, I read in 'to using Adobe FlexBuilder 3"(p.67) that the Flex components Panel lists only visible components, according to literature"components that extend UIComponent.

  Note that my question is to be visible on the stage in Design Mode, and not in the components Panel. As UIMovieClip does not inherit from UIComponent (and the UIComponent class does not seem to be available in the Flash IDE), is also the cause that the component of the IDE Flash is not visible on the stage of Flex in Design Mode?

  Can someone confirm or deny this?

  Kind regards

  Marcel

  Hello

  For the IDE flex component, it works only if its a MXML component. It's that it would render in Design view 'stage' if it's a MXML component.

  If it is an actionscript class, it must be available as a library in the porject so that it can be rendered in DV.

  If the component you are trying is an actionscript class, please try to move it to a library and use it in your project to see it in DV.

  In FlashBuilder 4, we support made of UIMovieClip objects that are in the library (SWC) and added to the project build path.

  Kind regards

  Out straggler

• All my plugins keep crashing after I tried to use them. The two most important, I really want to work are silverlight and adobe flash player, but for some reason, Firefox 9.0.1 crash them. All plugins are updated

  All plugins are updated. This has only started happening recently. Plugins seems to start for a few seconds (not more than 5) and then crash. Chances are that there is more than a problem with Silverlight and Flash, but they are the only two I use really.

  Follow the suggestions mentioned in the following articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Solve problems with plugins like Flash or Java to solve the common problems of Firefox
  • Clear the Cache and Cookies

  Check and tell if its working.

• all my components are grey in multisim11. Path to my configuration in the global preferences file is also grayed out, can not change the standard cfg

  all my components are grey in multisim11. Path to my configuration in the global preferences file is also grayed out, can not change the standard cfg

  Hi Escapermark,

  Take a look at these articles to the knowledge base, one should set the gray on the problem:

  http://digital.NI.com/public.nsf/allkb/609A763289E6E81D8625739F0052151F

  http://digital.NI.com/public.nsf/allkb/2719D00E36A4D53A8625721300685B3F

  http://digital.NI.com/public.nsf/allkb/B3D720348D55D0C5862575BA00560908?OpenDocument

• Entering a project LV file in VSS, all files in the project are omitted. Only the shell project and settings are vs. No idea why?

  Entering a project LV file in VSS, all files in the project are omitted. Only the shell project and settings are vs. No idea why?

  Chuck72352,

  Hello! It's my understanding you need to add the files separately to Source Code control with the .lvproj file.

  This is a lot of information on Source Code in LabVIEW control practices.

• All ADF Faces components are suggested to have IDS

  JDeveloper 11 GR 1 (11.1.1.1.0) material emits warnings in the code editor if ADF Faces components have no ID is specified in the page. 'S done it by marking the corresponding component tags using orange lines below them. Why some components should have IDs if we must not reference them anywhere? (For example, most < af:group >, < af:separator >, input/output components with no dynamic link with other components and so on.) Is there a way to remove warnings "When using ADF Faces, it is suggested that all components have IDS" appear on the screen, because these fake warnings (which are everywhere) could prevent see me more most important possible?

  You can disable this message by using the tools-> preferences-> audit Faces-> profiles-> Rules-> ADF-> ID of component rules

• Several components are listening to the same custom event?

  I tried to make the transition from Flash to Flex and I've been struggling with this one for the last two days. I used to do a lot of SEO _root.moviecontainer.mylable.text, but I'm trying to get the idea of demonstrations, dispatchevents, etc. down and get SEO for Flex to manage. The simple explanation of what I'm trying to do is to have a component triggers an event and either dynamic broadcast to all components that subscribes to this event (the number of components listen to will change during execution and so I don't want to directly refer to these objects). I would like to be able to generate other objects during execution and to associate them with this event dynamically. I tried to add an addListener (customEvent) to listen to the dispatchevent(), but I had no luck with this method until now. Raises the event, but I can't understand how to associate other components with it. I guess that having only three parts to it: the component that triggers the event, the event itself (custom) and the component that is listening for the event. And none of the components know anything of the any of the other components that exist. The trigger could be raising an event 3, 10, or 100, other components are listening, but he doesn't know how many elements are tuned, nor she cares & maybe even wait for one component which is capable of raising the event, he is listening the listening component, or there could be a total of 10 components capable of triggering this event. If you did it at the end of the present, thank you. This has been a headache for me, and I'd appreciate any help offered. Thank you.

  iTextArea is a brother of iButton and isn't in its parent chain, so it will not be a propagated event.

  Perhaps you could put a Manager in the Application that redistributes events and listen for them in iTextArea.

  Tracy

• In the Flash IDE, how can I scale the contents of a symbol without their appearance throughout the FLA?

  In the Flash IDE, I would like to scale the content of a symbol and then conversely fits a all instances of the chronology of this symbol.

  We have animations that were created to double the size of the size of the intended end-use. Of course, we can reduce bodies to 50%, but this isn't what we want to do. And here's why.

  Our use case for these animations means assign some of the contents of the symbols for performance reasons bitmap data. If we simply reduce the instances, the bitmap content is always twice as large as necessary.

  Yes, just make the symbols that only contain a bitmap image.

  Another tip, your bitmap image is either going to be recorded in the middle or top left. If it's in the Middle, you can select, Panel convert 50%, convert to bitmap, transform Panel 200%. If it is registered in the upper left corner (not sure how this would happen!), it is best to use the properties panel to the half of the width/height, convert to bitmap, set a height double width.

  Either way, in the case where you didn't know that, in one of these fields of property you can do math. Do not sit there work on which half of something is mentally, or in what position of x, it would be if it was 1234 pixels to the right. You can go on the ground and add: "/ 2" for example and all width was, it's now half that. Similarly, for the x position, you can add "1234" after the existing x value, to move that many on the right.

• Error 'the Application components are missing' no disc to reinstall

  I have the error message on my next mac I need to install some of the components are missing. I don't have the disc so the solutions has to move from its current location to photoshop CS5: / / / applications/adobe photoshop CS5, but I have no idea how! Any help please.

  Thank you

  Please download it again Internet Setup and keep a copy of it for future use.

  http://prodesigntools.com/all-Adobe-CS5-direct-download-links.html

  Please download the Mac file, navigate to the directory where you saved the installation file and double-click on the dmg

  • Follow the instructions on the screen to install
  • When you are prompted for a serial number, enter your serial number and complete the installation.

  Follow the instructions mentioned carefully.

  Kind regards

  Ashutosh

• How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  The SWF file can be used in the same way as the CFC, which means that you don't need to "visually show" anything when it is loaded. Your code can use the classes and assets incorporated into the SWF, just as a SWC file. So if someone just to load the SWF file to see what was in it that they see nothing. They could however access programmatically to what anyone on the inside just like you, if they went to that level. But it is not as easy as just racing as SWF to see what is inside.

  I hope that all packaging several separate sovereigns will allow you to load and unload only what you need to keep the RAM usage as low as possible with a minimum load SWF.

  If you are ready, please mark all useful/correct so we can filter without response. You're welcome and good luck!