All files in Windows Explorer appear as an icon of the blank white page

When I start my computer, I open Windows Explorer and open a folder to look at a few pictures, everything seems in good condition. All icons and thumbnails display correctly. So, I'm going and open a file to view it, or go back on the record and then go back in the. All icons that originally appeared as the icon or the correct thumbnail now appear suddenly, like a blank white page. I tried to rebuild the icon cache and don't have any managed to solve the problem. Please help me if you have any suggestions, what could be wrong... Thank you!

Aaaah, as a matter of fact Yes! I have solved my problem. I hope this works for you also. I discovered that when I started the Task Manager and look under 'Process' there was a dllhost process that gradually consumed more in addition to my memory. It would slowly increase until that eventually the entire system would crash and I have to restart. So I solved it by putting a term simply the dllhost process. Every once in a while, however, I see the same problem product and I must go to the Task Manager to check... and of course, this same dllhost will eat all my power of transformation. So I just 'End process' on this topic again. Not a big problem because it happens less frequently than once a month to me and its an easy fix. So start up the Task Manager and see if you have a dllhost using an insane amount of memory. If so, this is probably what is causing your problem. I really hope this has solved your problem because it was a huge pain in the * for me. Very frustrating. I must also point out that the first time I tried to stop, it would just pop up again, so I had to close about 5 times in a half-hour time stretches on probably. DO NOT 'end process' on ALL Dllhost however as it may cause other problems with your computer. Just end the process if she consumes a ridiculous memory... amount as more 1 000 000. Oh yes, I also wanted to add that I was a little nervous about to terminate a process dllhost due to potential problems said it could cause, but when I finish this one, one that consumed all of my memory, no negative side effects occurred, none that I noticed.

Tags: Windows

Similar Questions

  • How can I pay what columns appear on all records when windows Explorer opens?

    original title: Windows Explorer in Vista

    How can I configure how windows Explorer opens?

    How can I pay what columns appear on all records when windows Explorer opens?

    Why vista is so frustrating use?

    Hi SuppyLives,

    You experience problems in the customization of Windows Explorer?

    Method 1: You can run the fixit available in the link below and then check

    Diagnose and repair Windows files and folders problems automatically

    http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us?EntryPoint=lightbox

    Method 2:  You can see the steps provide in the article below

    How to modify your folder view settings or customize a folder
    http://support.Microsoft.com/kb/812003

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
    How to back up and restore the registry in Windows

    You might want to know

    Work with files and folders
    http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-files-and-folders#section_2

    Demo: Working with files and folders
    http://Windows.Microsoft.com/en-us/Windows-Vista/demo-working-with-files-and-folders

  • All of a sudden I can't copy files in Windows Explorer in any method

    Suddenly I can't copy files in Windows Explorer in any method - I get a message from Clipboard "item not added: Format not supported by the Office Clipboard." Never had a problem before, same thing for any type of file, Word or jpg. Am on Windows 7 and Office 7. Have rebooted and done a virus scan, but cannot get this to work.  I can always copy the text from various sources, the problem is only with files.

    Close office word... If you have opened it.

    I personally do not know why you would want to copy instead of cut.

    Unless you like the duplicate files.

    Somewhere the Office clip board interferes with windows clip board,

    Most love because you have Office Open in another window and the clip Panel Office setting is set to always open or at least to check and change these settings.

  • List of copy of the files from Windows Explorer in the form of text in an application...

    Windows will always add something, or a menu item to copy a list of files in Windows Explorer in the form of text in an application?  I would like to run a DOS command (dir c: /s > c - example.txt) as I did years ago, but as I'm sure your aware, constantly been availible for years and your virtualization Windows MS-DOS command line is incompatible with my new computer... All solutions would be grately appreciated.

    Thank you
    Dave

    Hi Dave,.

    I have good news for you:

    There are two ways to do what you want:

    The first is the simplest and is already in Windows 7 (and Vista by the way):

    1. highlight one or more files that you want to know the way in Explorer.
    2. press and hold the SHIFT keyand right-click on one of the highlighted files.
    3. when the popup menu appears, click the entry in the path of the copy which appeared as if by magic, because you're now the SHIFT key.

    A slightly better method, IMO, but it takes a little extra work is to add an extension to the send menu to allow you to right-click on one or more files and choose send to-> Clipboard (as name).  This somehow me seems more practical, because I'm used to the way in which the rear PowerToys when.  Such an extension, which also adds a nice Panel to help you manage the menu send to, is a neat package small freeware called send to toys, by Gabriele Ponti, which can be downloaded here: http://www.gabrieleponti.com/software/index.html#sendtotoys

    A nice feature of the program send to toys, is that you can even have it put quotes around any path to file that contains white space.  Practice indeed!

    I hope this helps!

    -Christmas

    P.S., A command line similar to BACK tool is still (and always has been) available.  On the start menu, select: Start -> all programs -> Accessories -> command prompt.  Or you can just run: CMD.exe

  • Do a right mouse click on the name of the file causes Windows Explorer stop.

    Do a right mouse click on the name of the file causes Windows Explorer stop.

    The problem is sometimes caused by a third-party extension. ShellExView can be useful to see what shell extensions have been introduced in the Explorer. Lire read on this topic, then scroll down to download the x 86 (32-bit) or x 64 (64 - bit) version here near http://www.nirsoft.net/utils/shexview.html

    When you run it, click the column of company for sequence entries in alphabetical order. Suppose Microsoft entries are in good faith and focus on others. Is something listed that is useless or unknown? If so, select it and click the Red (on top left) task to turn it off. You can find it easier to disable them all and then reactivate (green area) one at a time and try to explore until the culprit is found.

  • Cannot find the Favorites file from Windows Explorer in Windows XP. Does not currently have IE in Windows XP

    I have been using Windows XP for a while.  I am always connected in Windows Explorer through the icon 'Butterfly '.  Never interested in Internet Explorer - too cluttered screen.  I have several files in Windows Explorer and virtually none in Internet Explorer 8.  How can I find the Favorites file

    Windows Explorer so I can import them from a new laptop with Windows 7? There, not too many people who understand what I'm saying

    Tommy,

    You've done a good job answering my question.  Somehow, and I don't know how I did it I accidentally erased all the favourites I had accumulated for quite some time.  I have not found these missing Favorites in the trash that is where I would have expected to have. But that's another story and not a good thing.  I have so appreciated your efforts and I hope at some point I can get these favorites - wherever they are now.

    Sincerely,

    ECK Wolf

    Can try:
    http://www.Piriform.com/Recuva

  • How to display Canon Raw CR2 files in Windows Explorer

    I've been long going in circles!

    What I have to do to be able to view the CR2 on Canon Raw file in Windows Explorer in Windows 7. I tried the MS RAW Image thumbnailer but which does not appear only in the works on XP.

    Any ideas?

    Thank you very much

    Roy


    I've been long going in circles!

    What I have to do to be able to view the CR2 on Canon Raw file in Windows Explorer in Windows 7. I tried the MS RAW Image thumbnailer but which does not appear only in the works on XP.

    Any ideas?

    Thank you very much

    Roy


    ===========================================
    No guarantee... but perhaps the following links would be worth a visit:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    FastPictureViewer WIC Codec Pack RAW
    A free collection of 32 and 64-bit RAW image

    decoders for Windows 7, Vista and XP.
    http://www.FastPictureViewer.com/codecs/
    (if this software works for you... programmers
    ask for a donation to fund future developments)

    Also... the FastStone Image Viewer freeware can be worth a try:

    FastStone Image Viewer
    http://www.FastStone.org/FSViewerDetail.htm

    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • When searching for files in Windows Explorer (WIN 7), can the railways under folder reading "c:\help\me\please" instead of "Please (c:\help\me)?

    When searching for files in Windows Explorer (WIN 7), can the railways under folder reading "c:\help\me\please" instead of "Please (c:\help\me)?

    Thank you!

    What you can do is to do a search, right-click on any column heading (for example name, folder, etc.), and then click "Folder path" from the list that appears.  You can also click to turn off the folder.  The next time you're looking for in this area, this column of path of the folder should appear.  You can drag the columns in a different order also.

  • Cannot open files from Windows Explorer

    Original title:

    All the files in my Windows Explorer now say ((somethingEx:_Documents).library - ms) I need help. What can I do to fix this? I can't open all the files in Windows Explorer?

    Help please. I can't open all the files in Windows Explorer.

    Hello

    1. What is the exact error code?
    2. Have you made changes on the computer before this problem?

    Provide us a screenshot of the Explorer window to SkyDrive so that we can better understand the issue and therefore provide you with the troubleshooting steps.

    Download pictures and files

    http://Windows.Microsoft.com/en-us/SkyDrive/add-photos-files-FAQ

    Please come back with the information needed to get help.

  • By double clicking on a file in Windows Explorer it only starts the program it does not open the actual file.

    By double clicking on a file in Windows Explorer it only starts the program it does not open the actual file.  1 program, all the others still work ok.

    This option is used to work, I installed a viewer of this program option (it's a based CAD program) and after that I uninstalled the viewer that he would not even start the program, he was trying to launch the viewr.  I noticed that the file association was still for the Viewer so I changed it back, but he now throws only program.  Under right click, properties, file Type: it is said the extension only where it used to say the name of the program.

    Thank you

    Sam

    Hey Sam,

    Default configuration program.

    http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

    If this does not work, then contact the Help Viewer support.

    All the best!

  • Debug Assertion Failed - make a right click on a file causes Windows Explorer to stop working

    Make a right click on a file causes Windows Explorer to stop working and then turning it back on.

    Message I get is:

    The Degbug Assertion failed

    C:\Windows\explorer. EXE

    File: f:\dd\vctools\crt_bld\self_64_amd64\crt\src\memcyp_s.c

    Line: 62

    Expression: sizeInWords > = count

    I hope someone can help. Thanks in advance.

    Looks like a ShellExtension incompatible.

    Run ShellExView [1] and disable all NON-Microsoft extensions. If the error are gone select 3rd party addons 1 followed by the other to detect the addon that causes the problem.

    André

    [1] http://www.nirsoft.net/utils/shexview.html

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • I need to print hundreds of pdf files in time of quick of a folder. Could you please suggest any method by which I can print a bunch of pdf files in windows Explorer.

    Hi, I need to print hundreds of pdf files in time of quick of a folder. Could you please suggest any method by which I can print a bunch of pdf files in windows Explorer. Thanks and regards, Madhav

    Then do it in batches of 15

    or

    Several PDF Download printer 1.4.1 - Freeware Files ... .com

    How to print More than a single PDF at the same time . eHow.com

  • When I click on a video file in Windows Explorer, I get the message "not found xvidcore.dll', shortly followed by the message" Windows explorer has encountered a problem and needs to close. "

    original title: xvidcore.dll not found.

    Nice day

    When I click on a video file in Windows Explorer, I get the message "not found xvidcore.dll', shortly followed by the message" Windows explorer has encountered a problem and needs to close. "  The screen becomes blue white.  I am operating Windows XP SP3.  Any advice much appreciated

    Thank you, Brian Newman

    No guarantee, but it might be interesting to try to download
    and install the XviD Codec:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    XviD Codec
    http://www.xvidmovies.com/codec/
    (name of the file to download: Xvid - 1.3.2 - 20110601.exe)

    Good luck...

  • When I create a new folder in Windows Explorer, I hit F5 to refresh the screen, the file disappears.

    When I create a new folder in Windows Explorer, I hit F5 to refresh the screen, the file disappears. If I try to create the same again, I get a message that I already have a folder with that name. It is nowhere on my computer.  I've searched for it & he's not here.

    R.Click on the desktop, properties, desktop, customize, web, search & check

    "lock desktop items" closes when thru.

  • I want to display the Nikon D7000 .nef files in Windows Explorer/widows Webcam live picture and use some ice with them in Windows Vista.

    I want to display the Nikon D7000 .nef files in Windows Explorer/widows Webcam live picture and use some ice with them in Windows Vista. I think that Microsoft's current camera raw codec not support.nef files from Nikon D7000. Furthermore, I would also like to use Adobe .dng files in files. VISTA has native free codecs for the same. Please season a solution?

    original title: Micorsoft Camera Raw Codec

    As far as I lnow... the following codec pack is
    the most current available from Microsoft.

    Microsoft Camera Codec Pack
    http://www.Microsoft.com/download/en/details.aspx?ID=26829
    (Windows 7, Windows Vista Service Pack 2)
    This package will allow RAW supported
    camera files visible in Windows Explorer

    The following retail software is not Microsoft
    but maybe worth a visit:

    FastPictureViewer Codec Pack
    http://www.FastPictureViewer.com/codecs/

Maybe you are looking for