All-in - one C6100 HP turns on and off several times

Similar Questions

• Computer not start, screen black, I have to turn on and off several times (I have Vista)

  When I turn on the computer, you hear the sound that is running, but I get a black screen with a white underscore on the upper left. Click on keyboard and nothing happened. I must turn on and off several times and then I get the Windows Vista logo.

  If the 2 methods below do not work, you may have to reinstall Vista:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• AXC600-NR308 TURNS ON AND OFF SEVERAL TIMES

  Hello world

  My AXC600-NR308 Office comes power on and off several times for different length of time, but never long enough for windows load.

  It is a victory that 8 90 days upgraded to win 8.1 to win 10. With 4 GB of ram.

  can someone help me. Thank you.

  EARL

  earlmatthews,

  If you didn't have this problem with Windows 8.1, you can come back and switch to Windows 10 once again.

• at the start, computer turn on and off several times before finally starting

  Product: Hp Pavilion M9177C-B

  OS: Vista Edition Home Premium

  Approximately 2 weeks, when you start the computer by pressing the Start button, blue starting light turns on, then turns off maybe 6 + times before it turns finally for good and then I can hear the hard drives being accuated.  I fear that one of those moments that she not turn for good. So, I took the computer on at all times and just close the devices.

  Hello slodave,

  As you hear hard drives or anything on the spot for a while, it seems that the problem may be due to your diet.

  You can look at the power Panel there should be a light on the subject. See if it shows that it begins well before the computer actually turns on (so it comes at the time 6 + it is turn on/off).

  If the food will then replace just to continue normal operation.

• Hello! I use a PC and have problems loading my homepage of Muse. First of all, I made one with the address "nordensstjarnor" and updated several times without any problems. And once, I couldn't download on 'nordensstjarnor' any longer. Don't know why, s

  Hello! I use a PC and have problems loading my homepage of Muse. First of all, I made one with the address "nordensstjarnor" and updated several times without any problems. And once, I couldn't download on 'nordensstjarnor' any longer. Don't know why, when he got the address "nordensstjrnor". That me ok at first, but now I really need to give the first address once again, "nordensstjarnor". But when I try, the alternative of the site of ' publish on ' old isn't here. And if I try to create a new one, but with the old URL, the box turns red. What can I do?

  The reason why you cannot change nordensstjarnor.businesscatalyst.com is because a different Adobe ID is used for the publication of this site.

  t * [email protected] is used for the publication of nordensstjarnor.businesscatalyst.com

  t s. * [email protected] is used for the publication of nordensstjarnorindex.businesscatalyst.com

  You must make sure that Adobe ID is used in account publish, so that you can see a list of the websites published under this account. Go in Edition > Preferences > publish on Business Catalyst > publish with accounts

  You can pass the accounts for you can also make changes to the sites.

  Thank you

  Sanjit

• Laptop computer CHARGER is turned on and OFF from time to time.

  Hi guys...

  I use an HP laptop and the Windows 7 operating system. Product name-Compaq 420, product number WT919PA #AB4.

  Today, I found that the light on the wall cell phone charger (orange led) is flashing (on and off) from time to time (once it is turned on and wait a few seconds, it is DISABLED. Then again, it is activated) when I pluged in charger. This continues. It is so to charge and then does not charge. I checked the status of the battery using HP Support Assistant, and it indicates the storage capacity of the battery is low.

  Can someone please help solve this issue? Why laptop computer charger light is on and off occasionally? Please help me guys!

  Thank you!

  Yes, it is OK to remove the battery.

  Remove the battery:

• HP 7410 all-in-one (will not turn on or off)

  Strange situation where the power button activates or disables the boot process.  Continuously display the start Word "Invent" with the HP logo.  May not know how to clear this or initiate the start?

  This can be caused by a wireless card has failed in the 7410.  If you can live with a wired LAN connection, you can solve the problem by unplugging the cables from the card wireless as described on this page.  (Ignore the ads...)  I've seen some reports that suggest to remove the cable, starting the device and plug and reconnect may work with the wireless, then available, but I just use mine wired lan.

• monitor flickers, after having turned it on, have to turn off and on several times to make it work

  The monitor flicker

  When I turn on my monitor it flickers, then return, must turn on and off several times and then finally works.  Just started in Charleston that happens, it's a sign that my monitor is exhausted?

  Hello

  This should ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  --------------------------------------

  Check the cable at both ends. Try the monitor on another computer because it could be the monitor.

  The issue could be the video card in order to check with the system manufacturer (manufacturer of motherboard for custom
  systems) or if actual video card manufacturer a separate device.

  If there is a separate video card you may need to remove ALL power and then remove and reinstall
  the map - in fact, remove and replace - do not just tight.

  The video driver may need to check updated and then re-installed with sources of support above.

  I hope this helps.

• Photosmart 7520 e all-in-one printer not turn on, green transformer upward and then turns off.

  7520 E Photosmart all-in-one printer not turn, transformer green light comes on then off again once, unplug the left and I tried once again even.

  nothing is dead.

  Hi woldtopper,

  I understand your Photosmart 7520 is not turning on and will remain lit. Please follow the steps in troubleshooting in the following document; The HP printer will not be running or to respond when the power button is pressed.

  If the problem persists, I recommend calling HP and let know, the issue and the steps you have already performed. It may be able to let them know that you completed all the steps in the HP document #c01321436.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  I hope this helps.

• PRI all-in-one HP Deskjet 3520: Deskjet 3520 printer all-in-one copy, but will scan and print computer

  This printer has always worked well... used only occasionally. The cartridges are fine.  Everything prints out fine computer, it scans very well, but does not copy.  Looks like it's copy, but shot out a blank page.

  Welcome to the HP community @273frustrated,.

  I understand that your 3520 Deskjet is no copy making more correctly however, you can print and scan without a problem. I will do my best to help! I might be far away but I suspect that there could be a problem with the printhead and it printing black ink. I say this because when you print from your computer, normally the ink colors mix to create a composite black, and when you print copies, it's only the black ink cartridge that is used.

  I want you to try a power reset and make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Please also try the procedure described in this guide and get back to me with the results when you're done and I hope that we can reach a resolution!

  Testify of my answer by hitting the thumbs up below and press the button "accept as Solution" if I have you helped a resolution!

  I hope this helps you!

  • Printer prints a blank Page or doesn't print black or color ink for the series of e-all-in-one-HP Deskjet Ink Advantage and Deskjet 3520 printer

• Xbox one constantly turning on and off without touching

  Hello, I bought an Xbox one a few days ago, and he played upward. I got it on 23 or 22 and it worked perfectly, I tried to turn it on today and it turned power then he was playing this noise on and off many times. I think there may be a scratch on the power button because it is a gamepad Wii U, so theres a tooth, it will glitch because it is easy to get, like the Xbox on the power button is sensitive. Can someone please help me and tell if they have had the same problem as me. Please answer me as soon as possible!

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  • Announcement
    PLEASE READ. Introducing changes of case review & forum

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.

• TE2000 - screen turns on and off quickly

  Hi all

  My TE2000 was wrong flashing. The screen turns on and off quickly, sometimes every second quarter or so, it seems, so bad that I can hardly read the display. It's like someone is pressing the lid-switch very quickly.

  It happens sporadically. Sometimes it won't happen for a few minutes. Other times it flashes just once or twice, and still other times, it becomes unbearable and continues for minutes at a time.

  Someone has an idea of what could be the cause? I looked into the screens of replacement on e - bay and cannot find a lot...

  Hello

  Have you tried to check if this problem also appears on external monitor?
  Not? Try to do that! If it doesn't appear that on the screen TFT internal display then it s not a graphics chip malfunction but display or a failure of inverter FL.

  Looking for a second hand TFT screen?
  It seems that the laptop TE2000 supports a 14.1 "1024 x 768 TFT color screen
  Therefore, you can use each view of each laptop that supports the 14.1 screen size

  Good luck

• structure of the event to turn on and off a LED

  Good afternoon

  I would like to activate a part of my algorithm according to the value in another part. To make it easier, I symbolize the value by a button and tried a structure of user event to turn on or turn off an LED located in another while loop.

  I can turn on the LED, but unfortunately I can't spend off of the LED thereafter.

  It is possible to change the structure of the event and select the option "change value". However, I would like the fatest way to turn on and off using the structure of the event and the Bay. I mean I would like activate a part of the algorithm only if the button is enabled for not having a continuous audit of the value of the button by the structure of the event.

  Please, if anyone has an idea to turn off the LED (after the switch on), add a comment without hesitation.

  I will be happy to solve this simple problem.

  Thanks in advance for your help.

  Ragards

  You have a race condition.

  When you click stop, it's a race about whether if the event gets not saved and destroyed by the removal of the stem all loop against sending the same user in the lower loop.

  Why it only seems to happen with the case of false must be a quirk of how the code is compiled and the order, it is run.

  If you put a step between your Boolean switch and LED, for me anyway, the error is now generated on the true case of the structure of matter (always false for switch.).

  If you put a constant error in the lower loop and wire while guaranteeing the Unregister event so that you now it does not run until the two while loops are arrested, then I don't see a mistake regardless of the value of the Boolean switch when you click stop.

• I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

  I had some trobele with my computer and had to take it when I got it. The firewall was working fine. I do not know

  If you date something on it so that it remains not.

  I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

  Hey Roscoe,

  If you're still using MSE, I doubt there's this problem.  This made a few changes to the Windows Firewall during installation (if necessary), but certainly nothing that would cause it to turn on and off like that.  It could be malware (malware can cause anything), but frankly more sounds like a file systems or corruption or some type of problem with your Windows Firewall or security setting or your operating system in a more general sense rather than the malicious software.  I will refer you to experts who specialize in this kind of thing, but if they tell you it's a malware problem, then come back here and we will be happy to help you solve it.

  For that matter as described, please post here to get the best advice from specialists in this: http://answers.microsoft.com/en-us/windows/forum/security?tab=all which will be more than happy to help you.  You will probably need to uninstall the other firewall you have installed so they can diagnose the problem properly and without hindrance (not just disable it, but completely uninstall to be sure) - but they can tell you more on this subject.  Don't forget up next to the Windows Version to use the dropmenu to choose your version if you find yourself in the most appropriate forum for your system.

  I hope this helps.

  Good luck!

• Loading with interruptions, screen turns on and off

  I always put my phone in silent mode and plug it in before going to bed. I noticed it turns the screen several times during loading. I can't that assume this is caused by the brief on the charger, the screen always turns when the phone is connected.

  When the battery is almost full, it often becomes extreme the screen starts to turn on and off quickly. This morning, I took a screenshot of the use of the battery before disconnecting. It shows a decrease in the rate of load to 100%, indicating my phone set on another light show.

  I tried two different Chargers, (one came with the Z3C we speak, the other with my Xperia V) a magnetic cable and mini-usb ordinary and even three Sockets different. Problem persists.

  While I do not notice an impact on the performance of my farm, I'm afraid that it will destroy my battery finally. My phone is only six weeks old. Someone at - he seen this before? Any ideas to fix this?

  

  Hey guys,.

  I finally thought to it: it turns out that a clock plugged into another outlet in the same room was the cause of the problem.

  I hope that my battery was not too suffer from these sessions of loading bumpy.