All-in-one HP Photosmart 2575: HP Solution Center

Similar Questions

• HP 4315 all-in-One: application of the HP Solutions Center in point 8.1 of Windows

  Windows 8.1 installed and reinstalled driver for HP 4315 All In One.  The HP Solutions Center's application is not found and I can't locate it on the web.  I followed the link to HP, but the solution Center wasn't there.

  Hello

  Only a set of available drivers for your printer for Windows 8.1, the HP Solution Center is not available for any later operating system.

  You can find no workaround available HP solutions Center below:

  http://support.HP.com/us-en/product/HP-OfficeJet-4315-all-in-one-printer/1138382/model/1138383/document/c03467277

  And below, you can find no workaround available for the box program to HP tools:

  http://support.HP.com/us-en/product/HP-OfficeJet-4315-all-in-one-printer/1138382/model/1138383/document/c03467279

  Kind regards

  Shlomi

• Photosmart 2575: HP Solution Center does not work

  I recently got a new PC with Windows 8.1.
  After installation of my printer HP 2575 (purchased in 2006) with the Setup file recommended AIO_CDB_2570_Full_Win_WW_140_408 - 4.exe I discovered that the HP Solution Center did not work.
  I received the message that the printer was not found.
  But printing works perfectly, so that the part of the installation was successful.
  I tried to uninstall and reinstall the printer in many ways, including:
  -Uninstall using Uninstall_L1.bat, Uninstall_L2.bat, Uninstall_L3.bat, with reboot between the two.
  -Installation of the printer driver just in a first time, then installation of the center of HP solutions after reboot.
  The result net is now HP Solution Center shows "HP Solution Center cannot start because your device is incomplete." When I try to start it (so it's even worse than before).
  V4.7.0.29 HPPSdr.exe print and Scan doctor says, "a later version of the program is available for this product.
  When I use HPSupportSolutionsFramework - 11.51.0049.msi to identify the right driver, I get the same AIO_CDB_2570_Full_Win_WW_140_408 - 4.exe driver file that I have already installed.
  Let HPPSdr.exe begins to extract what he considers the right driver gives the file AIO_CDB_2570_Full_Win_WW_140_408 - 4.exe I already downloaded.
  I have not actually tried to use the downloaded file, because the download crashed when only a few MB left.

  @Carl-H,

  Welcome to the HP community!

  I will do my best to make some useful suggestions in order to get the Solution Center installed and running on your system Windows 8.1. Please first test best in the printer, as this will show us if there are hardware problems, what could be the cause of all the failures of software.

  If copies seem to be working, try the following steps:

  1. perform a clean boot, restart the PC and try to run the installation.

  2. use the tool File Checker system for lack of repair or corrupt system files , run the scan to find the files corrupted on your computer. You can run the scan up to three times to see if he'll get all the bugs.

  3 cancel the registration and re - register the Microsoft Windows Installer service:
  1. click on the Start menu and type "cmd" in the search field and press ENTER.
  2 type "msiexec /Unregister" and then press ENTER.
  3. Type "msiexec/regserver" and then press ENTER.
  4 reboot your PC and try the install again.

  4. create a new profile user account with administrative privileges on your PC and run the Setup from there to see if it is correctly executed.

  Let me know the results, good luck

  Say thank you for the answer by clicking on the thumbs upwards

• HP Officejet 5610 all-in-one: need to Downlad HP Solution Center so I can't scan on my HP printer user

  I tried to reinstall the software and drivers for my HP Officejet 5610 all in one printer, but when I start the installation process on my notebook (Windows 7 64-bit) a window appears and says that it cannot find the specified file. I download the sofware and complete player file but for some reason whenever I try to install this same error window opens and I can't complete installation.  The error log says the file not found X:\hpzsetup.exe source. Any body to meet this problem and if you have how can I find a way to install the HP Solution Center.  My printer works fine, but I do not have the scan software. Of suggestiuons or ideas are appreciated.

  Thank you very much for the link to HP Scan range. I downloaded and installed and it works fine. Just as good as what I had in the HP Solution Center.  I really appreciate your help

• OfficeJet Pro 8500 All in one – disappear from the HP Solution Center guard

  Background:

  I have two HP all-in-one devices, at the office of one while a 8500 A909a and at home and Officejet 7310 all in one.

  My Dell laptop running Windows 7 Professional 32 Bit.

  I had the laptops and printers for several years, the two were connected through connectiosn fine wired via routers with printing/scanning also up and running by the HP Solution Center.

  If I work in the office and he wanted to scan a document I woul open Solution Center and left two printers would come to the top. I could click on the installed 8500 in the office and it worked fine. Even if I was at home I opened Solution Center, click the 7310 and could very well sweep.

  Problem:

  In recent weeks the 8500 keeps disappearing from the HP Solution Center. He still appears in Control Panel and other applictaiosn of windows like Word and I can print again, BUT not is more visible in the solution Center.

  I load the installation of the driver software (recently downloaded from the website of HP, file name OJP8500vA909_Full_14 (1)) and charging/install the 8500. It takes about 20 minutes to make. The 8500 appears then, but with a suffix like Officejet 8500 (7) after him in the solution Center.

  I can scan then very well but the next day when I start and get to the center of the Solution, it has disappeared again. It's infuriating and wastes a lot of time.

  Please tell us what can I do to load the correct software once and for all for allowing me to use two printers without them disappearing from the solution Center.

  Thanks in advance.

  Hi HPhep42,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  Driver and complete software of HP Officejet Pro features

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  Update Adobe Flash Player

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• Optical recognition of characters (OCR) is available with the all-in-one HP Photosmart 7515?

  A scan of roc is available with the all-in-one HP Photosmart 7515?

  Hello
  The software provided for your device does not include OCR functionality
  As you can find listed in the specification of digitization, text files like TXT or RTF are not supported by the HP software:
  [SPECIFICATIONS]

  You can use a solution of OCR 3rd party to analyze as editable text.

  If you have Microsoft Office suite, there is a good chance of the suite to provide this type of functionality:

  Office 2007 or 2010:
  http://www.howtogeek.com/HOWTO/14595/OCR-anything-with-OneNote-2007-and-2010/

  Office 2003:
  http://agsci.PSU.edu/it/how-to/perform-OCR-with-Microsoft-Office-2003-document-imaging

  Kind regards
  Shlomi

• I can't receive faxes on my all-in-one HP Photosmart 3100

  I recently installed Windows 7 32 bit. Now I can't receive faxes on my all-in-one HP Photosmart 3100

  Hello Travis_C,

  I managed to fix this problem in all things, read the manual. It seems that the automatic response was some how turned 'OFF' and this is why no faxes received. Thanks for your reply,

  See you soon

  BJP1

• all in one HP Photosmart B111h printer black cartridge 5514

  Set us up our new all-in-one HP Photosmart 5514 B111h printer yesterday.  The black cartridge seems to print does not always and printer don't align.

  Here is the document Print quality for your printer troubleshooting: http://support.hp.com/us-en/document/c02914910

  The printer may not properly align if she isn't black printing. Try the procedure described in the document, in particular one to clean the print head. Are there no black at all in prints? If you follow all the steps described in the paper and still can not black to print correctly, you will need to contact HP for warranty support.

• All-in-one HP Photosmart C3140: pension / Reset C3140 all-in-one for gift

  Hi all

  I'm retiring my all-in-one HP Photosmart C3140 printer/scanner. Is there a way to reset it completely, reformat or erase all the settings and memory on the machine, especially all preliminary scans?

  I scanned documents with the bank details, social security numbers, etc. on the device, and want to be sure, that it is perfectly clean before giving. (That, or I guess I'll take a hammer to the old fashioned way!)

  Thanks for your advice.

  More complex? I guess that not on this printer. That's what the textbook says.

• I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print all programs except

  I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print to all programs except the HP Image Zone. It shows the right default printer. When I print a photo 4 x 6 prints only part, and it is slightly enlarged. My operating system is Windows XP. Do you need any other information? Thank you. Peggy

  Hi PeggyOlson,

  It is an older program used with your 2570. Try to download and install the new photo software from the link below.

  HP Photo Creations

  HP Photo creation FAQ

• All-in-one HP Photosmart C4150 says paper when it is not

  All-in-one HP Photosmart C4150 said paper when it is not. I reload paper and press ok and get the same answer

  In general, this is due because the rollers of the printer is dirty, or are not engage as they should. The document below should help you to solve the problem. If this does not work, you can have a sensor or other mechanism, out and need to replace the printer. Let me know what happens.

  http://goo.GL/US1fV

• All-in-one HP Photosmart Premium C309g-m requires the password wireless

  All-in-one HP Photosmart Premium C309g-m we recently had to ge to a new Westell router for the wireless. the printer connects when we put the password but anytime the commection to the router go out it will not reconnect until the password is released. He seems to forget the password.  System indicates that the software is up to date for the printer.

  Hi ckmcgraw,

  Welcome to the Forums of HP Support! I see that you have recently changed your wireless router and now when he loses the connection, you must enter the password on your HP Photosmart C309g to reconnect to the wireless network. The reason why this could happen, it's every time, it loses the connection to the router assigns a new IP address, which would require a password for the network.

  You can set a static IP address for the printer, which should solve your password entry wireless every time, he loses the connection. See the steps below:

  • Print a network from the front of the printer Configuration Page. Note the IP address of the printer.
  • Type this IP address into a browser to reveal the internal settings of the printer.
  • Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  • On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  • Use 255.255.255.0 for the subnet (unless you know it's different, if so, use it)
  • Enter the IP Address of your router (on the Page of the Network Config) for the gateway.
  • Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  • Click 'apply '.

  Please let me know the result, I hope this helps!

  Thank you

• Is the all-in-one HP Photosmart C4280 capable wireless?

  Wireless all-in-one HP Photosmart is capable?

  No, unfortunately, the HP Photosmart C4280 all-in-One is NOT Wi - Fi capable.

• How can I remove the personal info of all-in-one HP Photosmart Premium C309 Fax?

  I want to sell all-in-one HP Photosmart C309 of my daughter. I did a reset using the # and 9. Should I do something else?

  Hi, the reset #9 should be enough

• All-in-one HP Photosmart 3310: 2 HP inkjet printers different... same problem

  The time which was formerly set via the network apparently to I remember ever setting the time on one or the other. Today, I noticed for the first time that both of the printer are turned off as follows:

  HP Photosmart 3310 all-in-One - Time is 19:43 locally the printer indicates 19:12 (thirty minutes slow).

  HP Photosmart Premium Fax C309a series - time is 19:43 locally the printer indicates 19:35 (slow 8 minutes).

  Two of these printers previously seemed auto-sync the time on the display panel. Is it possible that my ISP has started to block the NTP port or something?

  Hmm, no, I just connected to 0.pool.ntp.org via ntpdate on my linux machine, and he was not blocked. So it's something on these printers has gone wobbly.

  Hi @tcagle53,

  Thanks for joining the Forums of HP Support with your request for time to printer.

  I understand that you have 2 printers and a HP Photosmart 3310 HP Photosmart Premium Fax, and each printer is showing incorrect. I would like to help.

  The printer usually have the user set the time and Date when the printer is in the configuration. Sometimes things like power outages or to unplug the printer can cause time to read properly.

  You can set the time to the correct time using the printer control panel.

  To set the time on the HP Photosmart 3310 device:

  

  To set the time on the HP Photosmart Premium Fax:

  1. press on the installation program button.

  2. press the button arrow down to select Preferencesand then press OK.

  3. press the down arrow button to select the Date and timeand press OK.

  I was not aware of the printers synchronization automatically at the time of the computer, but sometimes the built-in Web server (EWS of the printer) will have a setting "Synchronize with the time on the PC" that can be selected if the printer is used on a network.

  

  Once the built-in Web server is in charge there should be a tab somewhere near the top of the window.  If you click on Date and time parameters should be able to be selected on the left side. If the sync option of the printer with the computer time is available it usually a checkbox to check before you click apply. Printer not all have this option.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!