all my emails, go to the Outbox and are not sent. How should I do

Similar Questions

• Try to delete an e-mail message that is in my Outbox and are not sent because the attachment is too large of a file...

  I wrote a short message to two of my employees, and I have attached a 2-page magazine article I scanned.  The attachment was found to be 50MB in size. I don't know how it happened and I didn't notice it until I hit send.  Never, the message is sent because I assume that the file size is too large.  I tried for three days to remove my Outbox message, but I can't seem to remove it.  Any suggestions on how I can get rid of it and start again? Thank you very much!

  Just check to work offline , and then delete it from the Outbox.

• When I send an email, my email goes to the Outbox and stays there forever.

  When I send an email, my email goes to the Outbox and stays there forever.

  Go to file | Work offline, then in the shipping box and remove it.  If you have this problem a lot, then your sent items folder may be corrupted.  Try to go to file | Identities and the installation program and new identity and then add your account and see if things work very well.  See also www.oehelp.com/OETips.aspx#3

  Steve

• When you send an Email to someone not in my contact list "Check names" appears and says not in the contacts list, and are not sent.

  original title: sending Emails

  When you send an Email to someone not in my contact list "Check names" appears and says not in the contacts list, and are not sent.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you use a POP3 Protocol account, please post on the forum network, e-mail and put online:

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  If you use Hotmail, please report it to Windows Live Solution Center, son of Hotmail:
  http://www.windowslivehelp.com/forums.aspx?ProductID=1 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• in the folder windows images, photo icons are the same and are not actually see a little image of the image. How to make this happen

  in the folder windows images, photo icons are the same and are not actually see a little image of the image. How to make this happen

  Hi tonutot,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. only happens in the pictures folder?

  Check and make sure that the bottom of settings is set correctly on the computer.

  (a) in the currently open folder, click organize on the toolbar, and then click folder and Search Options.

  (b) click on the view tab, and then deselect the always show icons, never thumbnails check box.

  (c) click on apply and OK

  Behavior and change folder views

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-folder-views-and-behavior

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The cutting tool are not sent Snip to the e-mail recipient.

  The cutting tool are not sent Snip of recipient of mail on Windows Live Mail 2011.  Had worked on earlier versions.  Click on the send Snip button, and nothing happens.

  A couple of things you could try.

  Launch the tool captures via a right click on it and select 'run as administrator '.

  See if the uninstallation and reinstallation of the Snipping Tool makes a difference.

  This is a quote from Ronnie Vernon.

  "Try refreshing the Snipping Tool installation. This tool is part of the Tablet PC optional components in Windows Vista.

  Open Control Panel, click Classic view in the task pane.

  Double-click programs and features.

  Click on the 'activate Windows features and turn off' in the task pane.

  This window may take a few minutes to display.

  When the options appear in the list, scroll to the "Tablet PC Optional Components" and remove the check mark for this element.

  Click OK, quit everything and restart the computer.

  This allows to uninstall the "Snipping Tool" System.

  Once the computer restarts, go back to the Panel and repeat the same procedure.

  This time the check box adds the "Tablet PC Optional Components".

  This will install these components in the system with a new copy of all the files. »

• I have an email stuck in my vision of the box. Are not sent and cannot be deleted. How he get out of here.

  He has been there 3 days.  Systems turned on and turned off several times and as e-mail remains in the Outbox.

  You don't mention what email program you use. If Outlook Express check for working offline and deselect the preview pane and see if it will remove this way. If this is not the case, the sending, or sent items box is corrupt.
   
  Proceed as follows for the Outbox and if the problem persists, repeat for the sent items after you move the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the DBX file for the folder in question {Outbox.dbx} and delete it.  Another will be created automatically when you open OE.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

• When I try to send an e-mail message in Outlook Express 6, it gets stuck in the Outbox and is not sending.

  Help!  When I send a message it is said there is a mistake, but there is no error and he actually sent the message.  It gets stuck in my Outbox and if I don't delete it will continue to send over and over again!  What can I do?

  original title: OUTLOOK EXPRESS 6 - problem

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• the back and are not virtual machines running on Isilon

  Hello vExperts.

  Could someone please share the details of the back and to not execution of virtual machines on EMC Isilon...

  We have a problem of IOPS / serious storage s, don't have just enough time zones and no money in the budget for more, but we have an Isilon with certain capabilities, I don't have all the details in front of me that I write this message about what nodes and others look like but soon as I have them I will add them in the post.

  For now, if someone wants to throw me some knowledge around deployment of virtual machines on Isilon before blindly go us in that direction that would be great

  Thanks for you input in advance!

  In short: not to run virtual machines on Isilon.  Been there, done that, didn't like it much at all.  You will cause you grief.

  We tried with KVM and ESXi and neither works well. EMC has tried to run, but even their its saying not to.

  I love Isilon but not not for hosting virtual machines.

• Windows Mail - Vista - how to delete mail that is "stuck" and are not sent? Outgoing mail is connected to the top and I can't erase it, delete the mail.

  Foolishy I tried to send two videos through Windows Mail - Vista - I guess they were too large and will not, can not send - I would like to delete the mail and clear the path - I can't understand how do - "Server: smtp.att.yahoo.com - Protocol: SMTP Server Response - 421 Service not available - transmission - closing Port: 25 No. secure (SSL) Server error." ': 421 error number: 0x800CCC0F "is the response I get.

  You archive files. Work in offline mode? You should be able to see and open the Outbox always.

  If all else fails:

  How to remove an Undeletable Message stuck in Windows Mail
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  If still no joy, try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

• Installed all updates from MS, but the history update are not available in the MS Update screen.

  When Windows Update is run on my PC, the entry 'Review your update history' in the display of Windows Update is inactive, i.e., it cannot be activated to display the updates installed. All updates via the last previously downloaded and installed, with no error reported during installation, according to C:\Windows\WindowsUpdate.log.

  What it takes to turn the update history?

  Hello
   
  Let us, perform the steps below and check if everything works well under Windows Update history.
   
  Method 1. Reset Windows Update components.
  I would ask you to reset the Windows Update components and check if we get the history of Windows Update works again.
  Here's how:
  1. Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  2. at the command prompt, the following line, and then press ENTER after each:
  net stop wuauserv
  net stop bits
  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 Catroot2.old
  net start cryptsvc
  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 c:\windows\system32\wuaueng.dll
  regsvr32 c:\windows\system32\wucltux.dll
  regsvr32 wups2.dll
  regsvr32 c:\windows\system32\wups.dll
  regsvr32 c:\windows\system32\wuwebv.dll
  net start bits
  net start wuauserv
  net start Eventlog
  3 output
  4 restart the computer.
  For more information, see the article below:
  http://support.Microsoft.com/kb/971058
   
  Method 2.
  If the error still persists please provide us with the error log:
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.
   
  Method 3.
  I would also recommend to install the Windows Update Agent to manage the updates on your computer.
  Download and install the Windows Update Agent to manage updates for your computer.
  Follow the link below to download and install Windows Update Agent:
  http://support.Microsoft.com/kb/949104
  
  Please let us know if this helps you resolve the problem or if assistance is needed.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What are the elements and ARE NOT able to go 100% width?

  I don't understand why sometimes it will save me items 100% and others it won't.  I'm doing something wrong?  Thank you!!

  Many of us are waiting for the Muse to go fully sensitive!

  In a Word, the following will:

  -Blocks of text (can paste items such as photos or graphics "as text" to emulate the delicate design)

  -Executives 'Rectangle '. Use them as containers for photos using the option of filling background photos

  -properly installation files (% or dp, but NOT the res canvas defined) animate .oam Board (it is huge - if questions just quickly running the open edge wack animate do your thing and re-export in the time it would take to dig up of workarounds online)

  -a large number of widgets such as slideshows, compositions,.

  Do the following:

  -Paste the images

  -pasted graphics and assets

  -pasted most of flash animations (except if you set up beforehand in the swg file)

  -Group items

  -some pin elements

  -just a few widgets too

  -resolution sets the oam and pasted the html files

  This list is not exhausistive at all, but is the stuff I encountered more frequently. You should still be able to get 90 percent of what you want to be % defined by thinking a little off the beaten path.

  Hoipe and good luck, it's useful! :-)

• I can't get the page to scroll properly. It looks like its swimming pool when I go up and down the page and takes forever. How should I do?

  I had a conflict of interest in order to get rid of one of the display drivers.
  Since then, the page is a not properly scroll. I had this happen in the past and that you do not remember how I fixed it.

  This help if you disable smooth scrolling?

  Tools > Options > advanced > general: navigation: "Use smooth scrolling".

• I have several computers I need to reinstall the xp/vista os in and it tells me when I put the codes on computers that the cd keys are not valid, how can I solve this?

  I had to wipe the hard drives on these systems, valad codes exist on computers, I received a message that my system vista s code was wrong also, I could entered the wrong one, because it is a laptop that has been around the world a couple of times on a submarine with me, if the thumbnail has been somewhere and I can't tell if it's a q.o , or a c.

  What can I do about it?

  Ive been fixing computers for a few weeks now and I'm starting to think that if I wipe the hard drives with a nuclear weapon that program its easier then in case of problems the problems generated by my children,.

  Ive still 3 more fix, but this last one won't let me in him and the custom of vista, that either, I left my vista ultimate go on this one and put xppro on it, I don't like vista and I wanted to do that for a while, is there anyone to call, I can take photos of computers or video , or start a webcam, to provide evidence of the stickers,?

  Dan Falcon

  yellowbronco

  MS/CS/SS USN - Ret / tell.

  Hello

  You can access the link that provides information on how to identify, locate, and replace a product key

  http://support.Microsoft.com/kb/811224

• Turned on its side during the cleaning of the screen and do not know how to restore properly.

  cleaning keyboard and press something and he hit my screen do not know how to restore

  Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

  If this does not work: right click on the empty desk > graphics > Rotation.

  See you soon.

  Mick Murphy - Microsoft partner