All of a sudden my HP all-in-one (j4580) only displays the FAX info on screen and will be only TELEC.

Similar Questions

• After the reset of all plug-ins has recently installed the plugin no longer works and will not reinstall. It will not be displayed in the modules arrived saying that he installed

  I recently had to reset my plugins by using 12 Firefox in safe mode to get rid an extension/add-on causes a redirection problem. All was well, except for a plugin I need is no longer works. It is called 'missing-e' and is for Tumblr.

  I tried put it back at least 5 times, according to their instructions and am now here, after they said it was a browser issue. I do I get invited to install on firefox, I install, I get the message that it has been installed correctly - but then it never appears in the Extensions or Plugins area under modules area (even if nothing never appears in the Extensions). And the features, it allows tumblr are not enabled.

  The 'missing-e' people sent me here say they believe that it is a browser problem.

  -> Create a new profile to check if your profile is causing problems, as described in this article-> Basic - a new profile troubleshooting

  • Now, launch Firefox with the new profile.

  -> IF this new profile works, then you can retrieve your history, passwords, bookmarks, etc. from the old profile, as described in this article-> recovery of data from an old profile

  Check and tell if its working.

• My L7680 HP Officejet all-in-one prints only about 1/4 of a photo. Help desk services is not a problem.

  My L7680 HP Officejet all-in-one prints only about 1/4 of a photo.  Help desk services is not a problem.  Is there a solution? MHow

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP L7680 - set for your version of Windows
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=2512009&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Office, all icons display the logo of Media Center and open in Media Center

  original title: I went on the windows media center site now all my displat the globeand media desktop icons, I can't delete and allof them light up to media library when I click it

  I recently did a system restore to a previous time.i a site in windows media center and I don't know what I did but now all my desktop icons display the globe Centre of Neda and I can't do something because it keeps going mto windows media center

  Hello

  1. what operating system do you use?

  2. you have an error message?

  I suggest you follow the link and check.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

• ENVY 5530 e-all-in-One Series: My ENVY 5530 e-all-in-one prints only two pages of a multi-page document.

  My newly installed (Jan 2015) ENVY 5530 e-all-in-one prints only two pages of a document with several pages of my HP desk top 500-123ea, windows 8.1. Message on PC "Unable to print document", it's even on Double or single sided printing.  A ran Scan doctor, OK; reloaded software and Firmware from the Hp site. He spent hours and hours of reading the elements of list of support HP; Impossible to talk online with HP. very in angry and frustrated. This HP product seems not as "fit for purpose". I will give HP Feedback after this announcement and rate accordingly. I beleve others have similar experience of this problem. HP is aware?  Is anyone out there that can help?

  We gladly invite you.

  A Roll-up update is already available since December, although it seems that the description is not being updated accordingly.

  Follow the section "get the hotfix rollup for Windows 8.1"in my previous link, which can be obtained by installing the package or by using Windows Update, this is the update that the articale refers... ".

  Shlomi

• all in one fail to print the order 968

  Dell All - In - One Printer968 not answer the print command. How can I fix?

  GLORIAFOSTER,

  First remove the print jobs to remove all blocked the queue print jobs, and then restart your computer and try printing.

  Brand and model of your computer and the operating system is useful. 32-bit or 64-bit?

  What program anti-virus and firewall are you using?

  The Dell 968 printer using the usb cable connection or the wireless adapter? If the wireless adapter has been the printer connected to the network before?

  Rick

• just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL

  just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL

  Vista Home premium 32-bit

  Hello

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  ABon the Defender being turned OFF

  With MSE installed Windows Defender is supposed to be disabled.

  MSE has been designed with its own version of Windows Defender under its own program.

  If the two were running, it would cause system conflicts.

  See you soon.

• HP OfficeJet 7310 all-in-One used to have the support of .pdf. Under XP. Have a legal version of Adobe 9.

  HP OfficeJet 7310 all-in-One used to have the support of .pdf.  Under XP.  Have a legal version of Adobe Acrobat 9 Standard.

  Will have problems with the printer fax function.  Has chosen to re - install the software disk.  Came across all sorts of questions.  Downloaded the latest drivers for 7310 / XP.

  Now the .pdf is not available.

  List of available options: HP Imagzone Express, e-mail, Microsoft Word, Paint, Microsoft Photodraw, Adobe Photoshop Album 2, Adobe Photoshop, Microsoft PowerPoint and save to a file.

  Used to have Adobe Acrobat.  He want to come back.

  Hello

  My suggestion: scan of Acrobat, it is much easier to control. Simply open Acrobat, create the file from a scanner.

  Kind regards.

• install hp officejet j4550 all-in-one for drivers from the Web site. all works except scan option

  all-in-one for drivers from the Web site. all works except scan option

  what OS you have... Windows 7, Vista XP? and when you try to scan it is out of the front of the printer or from the software of the PC... and when you try to analyse what is happening.

• C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  Message: Script error...

  OK if you use IE9 32-bit

  Latest version of the driver from HPupdate

  Same problem on 2 different PC - running Win7 Home premium, another the proff of Win7, both 64-bit

  Hello borisgit,

  As you have noticed one solution is to run IE9 in 32-bit mode. You can also try running the 64-bit version of IE9 as administrator to work around this problem.

  Script error when you try to print from Internet Explorer 9

• HPC6180 function to scan lost all-in-one photosmart when changing the broadband providers

  After changing the broadband providers I could no longer use the functions to scan my printer on the network. Print still works perfectly, but when I tried to scan I got a message telling me that the scanner could not be found.

  It is a symptom that is very similar to the one described elsewhere on the forums - but the problem in my case was not fixed by any amount of uninstall and reinstall the software. If all goes well, describing the fix here I can someone else save a lot of time.

  When the scanner is installed first the device name is stored somewhere, and even if the software is uninstalled and reinstalled L4 is still remembered the old name.

  The diagnostic scanner utility shows clearly a name that cannot be 'ping' because it is not the same as the new name for the printer. The suffix shown by the diagnostic Scanner differs from that shown in an IPCONFIG/all (the connection-specific DNS suffix).

  Thus, in may a case my original router was distributing the domain suffix '.» «Home» so my printer was HPxxxx.home for the scanner software. When I installed a new router that he used the ".config" suffix if the printer has become HPxxxx.config and the software couldn't find it (even when re-installed).

  It seems that ONLY the scanner software uses this mechanism to talk to the printer - printing features are not affected. But with the scanner software you're looking for the wrong name it can't possibly work. Even if you re-install the software or 'fix' references. Home in the registry to point to HPxxxx.config something somewhere modifies the registry return entries.

  SOLUTION:

  Find a way to change the router to distribute a different suffix - the same as your old router. In my case it was impossible in the GUI of the router then I 'saved' the configuration of the router in a modified file - the name of the suffix in the file text - and re - load configuration in the router.

  Now the printer is HP software and I can't figure out how to fix the HP software to recognize a new name.

  I hope someone saves some time - but unfortunately there are a lot of reasons that the scan function may suddenly stop working - as evidenced by the publication on the subject.

  Good luck!

  So, the SOLUTION is to re - configure your new router to use the same domain as your old router suffix. Router usually come with a configured arbitrary domain suffix - and the HP software is not resisted this development.

• ALL IN ONE C3180 - ERROR "FAILS THE NEXT CARTRIDGE: 3 COLORS.

  HELLO AND I HOPE YOU ANSWER ME. I HAVE THIS PROBLEM FOR LIKE a YEAR, I BOUGHT a PRINTER ALL IN ONE C3180 3 YEARS ago AND all of a SUDDEN WHEN I TRIED to PRINT a MESSAGE SURGIT IN SAYING ' THE NEXT FAILED of CARTRIDGE: 3 COLORS ' THE PROBLEM IS that HE OWNED a COLOR CARTRIDGE inside AND he WAS NEW AND ORIGINAL. I THOUGHT MAYBE IT WAS EMPTY, I BOUGHT A NEW ONE AND A PLACE. BUT I LOST MY MONEY BUY A NEW ONE, AND WHEN I PUT IT, I HAD THE SAME PROBLEM. THE INK IS FLASHING. AND I CAN'T PRINT IN BLACK OR BECAUSE IT IS SAID THAT HE BOTH CARTRIDGES ON. ANY IDEA? BECAUSE, I HAVE REINSTALLED THE DRIVER, AND NOTHING HAPPENED. I BOUGHT 2 MORE BECAUSE I THOUGHT HAS A PROBLEM OF INK, BUT NOTHING HAPPENED. I CAN'T USE IT AT ALL AND I HAVE BLACK AND FULL COLOR CARTRIDGES. Thank you.

  I HAVE WINDOWS XP BUT I TRIED WITH VISTA ALSO AND NOTHING happened.

  I called HP because I was really frustrated and tired and have no guarantee. I was told that this isn´t a cartridge problem, it is a technical problem of the printer itself. they have a sensor to detect each cartridge and that the sensor has failed. So I need to replace the part or just buy a new.

  hope this information helps someone else.

• Because I downloaded the update of firefox I have more the firefox screen and will work not all of my favorites. Why?

  After I downloaded the latest update firefox I knew he disappeared. The opening of the screen is no longer the fox logo. The area of search in the toolbar indicates that leads research. And I find that not all my favorites still work. Example-I have to go to att to access my e-mail. That's fine if that's the way it is supposed to work, but if so I would like to know how to change my home screen - or at least the first thing I see when firefox opens on the site of att that I usually use my computer for e-mail. I'm also used to use google search and I'm an old lady of cat crazy I'm not really ready to change the way that I am familiar with my computer.
  Ideally, I get photo fox with the google search screen and click on the marked bookmark mail back on my computer?
  I'm not computer unless it is as it always has. Thank you, dawn

  Hello dawn, please be aware that there are malicious sites that will trigger the update of fake reviews/popups that try to get you wrong download software bundled with adware. never click on such websites or run these files offer - updates are managed automatically by firefox and do not download any file to it (always manually, you can check if you're up-to-date by going to firefox > help > about firefox).

  Please try these steps to find your firefox:

  1. Reset firefox (this will keep your bookmarks and passwords)
  2. then go to firefox > addons > extensions and where there are still extensions listed there, disable them.
  3. go to the windows control panel and remove all installed software recently where you don't know what he has or other suspicious looks.
  4. Finally, run a full scan of your system with security tools like the free version of malwarebytes and adwcleaner to ensure that adware is not present in other parts of your system as well.

  Fix Firefox problems caused by malicious software

• HP Envy all in one PC: Recovery Manager, the system restore is disabled by a virus

  Had a virus on my all in one PC envy after a free update to windows 10. Computer has been closing down could not get antivirus to work fast enough. After reboot system had disappeared. There is now no operating system. HP Envy Recovery manager, System Recovery is not highlighted, do not not the possibility to do a restore? Virus stronger than I've ever met. Thank you in advance.

  NIP

  Hello;
  
  Let me welcome you on the HP forums!
  
  It would NOT in fact the virus which prevents HP Recovery Manager to work.

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine. It's pretty much guarantee that no HP recovery will work: http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/HP-Recovery-Manager-Blocked-After-Windows-10-Upgrade/td-p/5170752

  What you would really need to do, is to erase the entire disk and restore your PC using something known as HP recovery media.

  HP recovery media is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs. You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update". If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entry and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  If you have difficulties to find a phone number, then try: 1 (800) 474-6836
  
  If HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• Flag r-110 all-in-one: how to use the microphone internal hp r-110 all-in-one

  I know where the internal microphone, but how to use it? I always had an external mic in the past. My r-110 HP all-in-one is new so still get acquainted with it. What I need to set up the microphone and if yes, how and where. Win 10 has a configuration of mic with voice training / recgonition, but it does not show internal mic as a choice so I'm stuck! I would try to make a recording of the voice, but have no idea how activate the microphone. HELP and THANKS

  @terrib

  System is (perhaps) one of:

  Results for ' Pavillion r - 110 all in one " (51)

  Select System > product Home Page >

  Product information > category: specifications

  Form example:

  20 - r110d of HP TouchSmart all-in - One PC product specifications

  Microphone and Webcam are located at the front of the computer, along the top edge (top of the screen).

  

  If your taskbar contains the small speaker icon,

  Right click on the speaker icon >

  Playback devices > recording >

  Check / confirm that the "internal microphone" is selected as the default device

  You can also find the control of 'His' in:

  Control Panel > display icon > Sound

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.