All printer drivers disappeared and impossible to reinstall because of print spooler

Similar Questions

• No Audio driver and impossible to reinstall.

  I reinstalled all my system (Windows XP SP3) and have now no sound. (Asus M2N - MX SE Plus Series m/b with Realtek HD Audio Driver)
   
  Drivers Realtek will not install and gives the 0xE0000227 error code. (Version R1.79 driver)
  Try to load the 2.66 version also fails.
  RHD configuration file shows:
  [ResponseResult]
  ResultCode = 0
  [Install progress]
  Confirm the Realtek driver
  Check the Version of operating system
  Realtek HD Audio Driver WDM directory exists.
  Microsoft Bus Driver directory exists
  Remove D:\Program Files\Realtek\Audio\InstallShield
  Copy Microsoft HD Audio QFE MSHDQFE directory
  Copy Realtek HD Audio Driver WDM directory
  Install the Audio driver Realtek HD Audio
  --> SetupAPI result LAAW_PARAMETERS.nLaunchResult = - 1
  InstallShield has been abandoned
   
  Windows does not any device of his work display in Device Manager and reports that no drivers are installed for this device or required.
   
  Any suggestions on how to install the audio drivers, and if this can solve the problem?

  Hello

  Follow these methods and check if that helps.

  Method 1:

  Sometimes this error appears when you install the Realtek High Definition driver in XP. You can download the driver here.

  Follow these steps and check if that helps:

  (a) open Device Manager (start > Control Panel > system > hardware)

  (b) in the 'View' menu Manager, select "devices by connection":

  (c) disable and uninstall it by right click on "Bus Driver for Microsoft UAA High Definition" Audio,

  (d) you can now install the drivers normally and without error.

  Method 2:

  Follow the steps in troubleshooting section and check if that helps:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Satellite A200-1FL: where can I get all the drivers XP and SATA HDD

  Where I can get the controller to sata drives so that it (he, she) can load Xp in Satellite A200-1FL.

  And another serious issue that when available have all the drivers for this model is only it (he, she) has 2 just now in the Journal official page that they are one of the graphics card and wireless. Because I need them for work reasons.

  Thank you

  Hello

  Maybe this topic can help you http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=26040

  Download the drivers, you can find on Toshiba page under http://eu.computers.toshiba-europe.com > support & downloads. Choose the right model A200. In your case, it must be PSAE6. Am I wrong?

  Good bye

• I just updated my creative application of cloud. When I did this, all my applications disappeared and he cannot find a subscription associated with my account. Does anyone else have this problem?

  I just updated my creative application of cloud. Once this is updated correctly all my applications disappeared from my dock. And when I put applications in the dock, he can now find a subscription associated with my account. What the helllll. Anyone else having this problem? I type this, I expect to hear back by the people of the online help.

  Hi André,.

  You could try to connect the Creative outside swarm (in preferences) and before coming back in and see if that helps. The procedure is described here: connect and disconnect activate Cloud Creative applications

  -Dave

• Trashed photoshop CS6 on the staff recommendation. Now impossible to reinstall because I have the upgrade disc. I have a drive CS5 and CS6. Should I install CS5 and CS6?

  I trashed Photoshop CS6 to correct another problem and the expert advisor Adobe. Now, I can not reinstall because I have the update disc. I have CS5 and CS6 records. Should I install CS 5 and then CS6?

  Kglad.

  I juxt writing to thank you for your help. I guess I got my problem fixed. I went through another long Chat session. At the end of the day, I think that they think that the problem is related to the language. I know I deleted a large number of unnecessary languages try to slim down. The error notice I had the language concerned, it still doesn't work, but PS works and no cat said I had installed so English to ignore uninstall it reinstall guest. I don't feel real comfortable with that, but I guess it works. All this is not denying your effort to help me. I appreciate it. I think I found the box aside and giving you an exceptional. Thanks for staying with me.

• Windows 7 Home Premium - default printer disappears and need to reinstall

  I use Windows 7 HomePremium and have a HP OfficeJet Pro 8500.  Regularly, sometimes daily, the printer disappears from devices and printers.  Only the printer devices disappears.  The fax device is still there.  I have to completely reinstall the printer from scratch.  Windows 7 is pre-installed - this isn't an upgrade of Windows 7.  The event viewer shows that the default printer is passed to the OfficeJet to MS one Note (I have MS Office 2010 installed, but this is also a problem with MS Office 2007).  At this point, the device for the OfficeJet disappeared from the list of devices and printers.  The loss of the unit of the printer seems to happen randomly.  I hope someone can help.  I've seen other assignments of the loss of a printer, but I found no solution.

  Hi bob,

  I suggest you run the scrubber to the HP website driver and check if there are conflicts in the drivers. The link to the raccoon driver is:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-80955-1&LC=en&DLC=en&cc=us&lang=en&OS=4063&product=3752462

  After you run the scrubber to the HP website drivers, you can try to uninstall and reinstall the drivers for your printer and check if it helps you to solve the problem.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Virus or not? All the icons disappeared and the programs need to be reinstalled.

  I turned on my computer this morning to find my wallpaper completely changed to the hp one. Also, half of my icons disappeared from my office. Programs that remained must be reinstalled for some reason any. Help, please. I just want to know what happened and make sure that I do not have a virus. Thank you.

  Hello

  There is no way sure of 100% to prevent it from happening again, and we don't really know the cause.
  A glitch like this is sometimes due to an update (Windows, the utility of the Antivirus system manufacturer, or)
  another program) and the cure is just another reboot, as it was this time. Although the actual cause is
  still unknown.

  Good for backups of your data, switch off the machine, and follow these steps.

  1 make a Restore Point (how to restore the link is only if you need to do).

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. don't run SFC and CheckDisk to ensure that no corruption is involved.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• wireless printer shows offline and impossible to reinstall the printer software

  original title: offline wireless printer

  my printer is offline and it wont let me not reinstall the software? I also restored the computer to a date where he worked and which did not help... It works when I plug in the usb cable, but not through the wireless... but my Wi - Fi works on the laptop... operating system 64-bit of Windows 7

  Hello

  1 did you recent hardware or software changes to your computer before this problem?
  2. what exactly happens when you try to install the printer software? You get the error message?
  3. what exactly happens when you try to print by connecting the wireless printer?
  4. What is the brand and model of the printer?

  Uninstall the printer drivers and related software, and reinstall them.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

• Since the new update of firefox, I lost my pop up blocker and impossible to reinstall, my home page to open when I click on the n of the firefox browser cannot set

  Since the new update of firefox, I can't put my home page, it opens to a blank screen, I also lost my pop up blocker and I can't reinstall restore my computer to an earlier point and still can not set my homepage and restore my pop-up blocker. I tried all the suggestions and I still have this problem. Can you help me or do I uninstall mozilla firefox.

  • Backup and restore Firefox profiles information

  Then:
  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from mozilla.org office (or choose the download for your operating system and language on this page) and save the file to install it on your computer.
  2. Once the download is complete, close all Firefox Windows (or open the Firefox menu

     

     Click the close button

     

     ).

  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Do not use an uninstaller to third parties as part of this process. This could permanently delete your Firefox profile data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. They can be retrieved easily unless they have been backed up on an external device! See back up and restore the information contained in the profiles of Firefox.

  Please report to say if this helped you!

  Thank you.

• all my icons disappeared completely, impossible to go to start... the screen is empty expect to connect to the internet

  fix Windows he had run, but still no visible icons

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I click. Firefox is strictly. All html codes disappears and I'm looking at lines and lines of purely text.

  I don't know how to explain it better. A screenshot would be perfect, but I can't understand how to add that. I uninstalled Firefox and reinstalled. I uninstalled Firefox and all my favorites and everything related to Firefox, restarted my computer and then reinstalled Firefox. The problem persists.

  Can solve you the problem for a short time by reloading the page without going through files cached? You can do this by using the CTRL + SHIFT + r keyboard shortcut.

  If it works and you have a Samsung system, you may disable or delete the program Samsung Support Center, which can remove the files from the cache of Firefox at unpredictable intervals.

• I've deleted the FSX folder and impossible to reinstall

  I deleted the folder (Files/Microsoft Games/Flight Simulator X can) FSX-

  1. the installation program will perform the update...
  2 Configuring Windows Installer...
  3. preparation of the installation...
  4 welcome to flight...
  5. flight Simulator...
  6.removing... (There is nothing to remove)
  7. copy new files...
  8. - II.
  9 error 1722...
  10. Rolling back...
  11 fatal Error 1603
  12. the wizard has been interputted...
  Screenshots of all say:

  http://img7.yfrog.com/i/screenshot27k.jpg/

  http://yfrog.com/0yscreenshot28gj

  http://yfrog.com/07screenshot29onj

  http://yfrog.com/3dscreenshot30nj

  http://yfrog.com/0xscreenshot31tj

  http://yfrog.com/0pscreenshot32ikj

  http://yfrog.com/0yscreenshot33nej

  http://yfrog.com/0zscreenshot34oj

  http://yfrog.com/5ascreenshot35ij

  http://yfrog.com/2pscreenshot36j
  http://yfrog.com/0lscreenshot37vdj

  http://yfrog.com/0pscreenshot38uj

  Hello mkaysi, welcome.

  My suggestion would be to try this:
  1. download but do NOT install the MSXML4 SP2 update from here:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3144b72b-b4f2-46DA-B4B6-c5d7485f2b42&displaylang=en
  2. download AND install the utility Windows Installer Cleanup from here:
  http://support.Microsoft.com/kb/290301
  4. open the Windows Installer Cleanup utility from the menu START. Should be found in:
  START > Windows Install Cleanup >...
  5 locate the FSX entry in the list, select it and remove it
  6 click on START
  7. click on "Control Panel."
  8. click on "Folder Options".
  9. uncheck "hide hidden files & folders".
  10. click on 'Apply' at the bottom right
  11. close all windows
  12. click on START
  13. click on 'computer '.
  14. click on "Local disk (c :))".
  15 go in Program Files\Microsoft Games\Flight Simulator X
  16. If there is any files, delete them
  17. Subsequently, go back one folder and delete the folder of the Flight Simulator X
  18. Once this is done, close all programs, restart the computer and then try to reinstall the game
  Let us know what happens
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• XPS 15 9550 CPU speed is as low as 0.75 ghz after manually installed windows 10 with all the drivers installed and BIOS updated

  I just bought this XPS 15 9550 in January, and I really appreciate it at first.

  However, one day, as pushed microsoft update to 10586 version of windows 10 and the machine will always fail to install the update, so I decided to download the image file and install it myself.

  The installation went smooth, but after a few days use, I found the computer is very slow during playback of videos and games and I came to find the speed of the CPU shows the label of performance in the Task Manager always will be 0.75 ghz and 0.78 ghz. He cannot go above that. I also found that the use of the CPU cannot exceed 30%.

  I've already updated my BIOS to 1.1.19, reinstall the system, a few times, choose the battery mode high performance, etc and this does not help.

  I also downloaded the power of intel and found gadget for my processor power consumers are still weak and the speed of the CPU is always not 0.80 ghz.

  In addition, I encountered the problem that after plugin the AC power, the speed of the CPU will fall to 0.39 ghz...

  Someone at - it an idea of what is happening here and how can I solve the problem? I'll really appreciate it. Thank you.

  I had my problem is solved. Follow these steps:

  1. download gadget power intel, you can search online for it.

  2. check the power of your CPU (package pw...) rate and open the videos and applications that will constantly consume the CPU power. See if the power is still weak.

  3. If the power is still weak, try to update your BIOS (download dell drivers and the new version should currently be 1.1.20) and see if things are getting better.

  4. If the power is still low, you must contact dell technical service to replace your hardware (my computer has replaced the northbridge, southbridge, I forgot, but after replacing, the CPU works fine)

  Note: If you run games using your discreet graphics card, such as starcraft II and you found that it's extremely slow, it is possible that your cpu is capped.

• Why my gadgets in the sidebar suddenly disappeared and cannot be reinstalled

  Without warning, and having not installed, all my gadgets sidebar disappeared!  I can't add them either!  All I get when trying to give me a little i in a circle in the upper left corner of the area where the gadget should be and the x to close the it and the part of gadget drag icon!

  MrFixit fails to solve the problem; Scans of SFC report no errors and Microsoft support is useless and unwilling to help!

  How can I restore my gadgets, ensure the same function, as expected, the load every time that I boot?

  Thanks for any real help here.

  This article could help.

  Difficulty for Gadgets displays do not properly in Windows 7 and Windows Vista - the Winhelponline Blog:
  http://www.Winhelponline.com/blog/gadgets-not-displayed-correctly-Windows-7-Vista/

  And. Note that Microsoft recommends to disable Gadgets due to an identified vulnerability recently. See notice of security of MS here.

  Microsoft Security Advisory (2719662): vulnerabilities in Gadgets could allow Remote Code execution:
  http://TechNet.Microsoft.com/en-us/security/advisory/2719662

• Extensions disappear and unable to reinstall?

  Have used PS 2015 since version without any problems. Today, my tk_actions Panel no longer works, so I rebooted PS. reboot as the extenion is no longer on the menu. Tried to reinstall page myaddons, nothing. Tried to install via the extensions Manager manaully, nothing. Tried to reinstall all adobe programs, yet will not appear. again tried to install it via the extensions Manager, but now Photoshop does not appear in the list...
  very frustrated now that I know that the extension is compatible, it works on my other machine and that he was working on this one there until yesterday. any ideas?

  Have you looked at the web developer TK_ACTION Panel site checks and update or the Setup instructions for 2015 of CC.   There is no extension Manager for 2015 of CC.  Its function was moved to the creative Cloud Desktop Applications and as far as I know The Cloud Desktop creative Application has bug inside when it comes to install the updates and extensions.   I get notifications every time I start my computer that there is an update for CC something on behance.  If I choose to install the update, I see it updated and get notification that Adobe Photoshop CC has been updated.  I know that I see the same thing the next time I start up.  So, I no longer install the update of behance.

  I have two machines with the creative cloud thereon. My workstation has CS6, CC, CC 2014 and 2015 installed CC. My 3 Surface Pro comes from Photoshop CC 2014 and 2015 CC.   On my workstation, I use help > Browse and modules to add a.  I have been informed that the add-on has been installed successfully on my desktop on my Surface Pro 3, I received a message the add-on could not install.   When I looked into what I found on my workstation the add-on has been installed in Photoshop CC. That it has not been installed in Photoshop CS6, CC 2014 or 2015 CC.  So I user menu help > modules, browse and use the Remove button to this module.   I put the menu help > Browse modules on my does not use the list.