(All the choices) does not work online dashboard

Similar Questions

• The administrator password for all computers on the network does not work for ONE of the computers on the network

  original title: the computers of network/administrator password

  The administrator password for all computers on the network does not work for ONE of the computers on the network. I need to log on as an administrator to install software, but the password does not work. It works on other computers, but not this one. How is this possible and how can it be solved?

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work

  I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work

  Hello JesusVigo,

  Thank you for visiting the Microsoft answers community.

  Have you tried to use the disk of Windows XP, or Windows Update running default drivers to search for best driver for your sound card?

  Also, I found only 1 driver on your system gateway Web site is located here.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• just has got rid of the virus and responsible for all the disks but given the wifi does not work

  WiFi doesn't work do not

  just has got rid of the virus and responsible for all the disks but given the wifi does not work

  Hello

  Check with the system manufacturer or the actual WiFi device manufacturer and ask in their forums (if any)
  for problems known.

  Actually, try updating your driver:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have published my muse built Business Catalyst site and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  I recently published my muse built the Business Catalyst site for preview and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  Hello Jimw93000314,

  Are you preview site in the edge browser? When you preview the page in the browser Muse create a local server to give you the preview in the browser. With the edge browser, there was a reported issue to access the local server.

  Please click the link below that shows the steps to enable the browser to edge.

  http://StackOverflow.com/questions/30334289/cant-open-localhost-in-Microsoft-edge-project-spartiate-dans-Windows-10-APER cu

  I'm sure this will help.

  Kind regards

  Vivek

• Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How can I uninstall the programs of the

  Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How do I uninstall the programs of the broken laptop and not running before installing on a new? Sincere friendships Fabian

  Hello

  If you have access to the machine, turn off Adobe CC applications by the signature of the application.

  Please see connect and disconnect to activate Cloud Creative applications

  Kind regards

  Sheena

• The keypad does not work on my computer hp laptop g72,

  The keypad does not work on my laptop hp g72, NumLock, slash, star, dashboard and more keys only work all digital and 'point' or 'period' keys don't work. Help, please.

  Hello

  You need to contact HP support, check their online documentation and drivers, diagnostics and ask for their
  Forums about known problems.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite L300 - 1-5 - the screen does not work

  Recently, I encountered a problem with my laptop, the screen does not work.
  I tested my inverter of the screen and my backlight lamp to see that if that was the problem, but they both worked perfectly, I then tried the entire screen with the parts and that worked too. (I tried in my friends Toshiba Satellite L300 - 217)

  Then I looked around online and got told to try to connect my laptop to an external monitor, so I did and the screen didn't work there either. So now I'm stuck, I have tried everything even made sure all connections aren't loose etc but it still does not.

  Anyone know what the problem with my laptop?

  Thank you, Tom

  Hey Buddy,

  > connect my laptop to an external monitor, so I did and the screen didn't work there either.
  This means that the internal monitor is ok and the reason must be the graphics card or card mother herself.

  I guess for now, you get only a screen empty and nothing happens on your laptop?

  In this case, you should contact the closest service provider authorized in your country. Just get in touch with the guys and ask for help. They can check the cell phone and fix it! ;)

• iPhone 5: objective of the camera does not work after update iOS 10

  Hello everyone.

  I swear to you that I have no idea how do... after a few weeks since the release of iOS 10, yesterday I force myself to be updated - the situation with iOS 9.3.2 became crash and unbearable lag every second. The fact is that I update, I like the system and use it for a few hours. Check the camera this morning, I see that the focus does not work. Now I also see AE / AF Lock, light changes whenever I tap on one side or the other, but not to focus. Not even close or far, nothing to do. I have not tried in the settings to do a full erase, I had no way to restore it since I do not have a backup.

  I tried to clean the lens - already cleaned, I tried to give him a few small nicks and follow the many guides online. I rebooted and everything done. Nothing has changed.

  The last photo was taken last night and has been developed. So I don't think it's a hardware problem and if so, how has it happened? A few hours ago the iPhone is fallen, but tell me if it makes sense. If it's a software problem, what could I do?

  I would avoid the assistance. It is a used iPhone, never jailbroken. I don't have a lot of confidence with the help, in 6 or 7 years he never went - iPhone always bought used and always worked very well.

  PS: I have no way to get into DFU, as iTunes does not see my iPhone. Up to iOS 9 that I had no problem even if I had enough of the device with the cable isn't original, but barely now lets load ("This accessory may not work").

  Hello

  I also have an iPhone 5 and I tested the question and mine is fine, how bad was the fall that you mentioned? Sometimes problems can come and go. Also try to reformulate your device.

  After this answer please.

  Thank you Will

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• The mouse does not work on my new Satellite L750/L755

  Hello world

  I bought a toshiba Satellite L750/L755 but the mouse does not work, I have no control on it that if I use an external mouse, while I have put pressure on the touchpad.
  I tried the following options:
  I updated the driver - I changed the operating system

  but nothing, still the same problem. Next laptop will be a Mac for sure.

  I look forward to hear from you

  Daniele

  Hello Daniele

  It's really strange that the touchpad does not work even if you have installed the right driver and installed the operating system again. At the first moment, we can say there is probably a hardware problem, but please be sure touchpad is listed in the Device Manager and also active correctly (FN keys).

  Check it please all the properties of the mouse.

• Satellite Pro 4200 overheating because the fan does not work

  I have a satellite Pro 4200 and it keeps overheating because the fan does not work I went in and everything seems ok but then I power it upward but the fan does not work someone can help? all cables are connected the fan run at all.

  Hello

  And how to help her in this situation? If you are sure that it cooling fan doesn t work 100% needs to be replaced.
  By the way: did you clean the unit and remove the dust?

• ATL-TAB within the APPLICATION does not work

  I'm a convert from windows and love the mac but Alt - Tab within the application does not work - very annoying. I often have multiple windows in the same application, and if the only way to go is to use 4 fingers Mission control, it's terrible because Mission control lists all windows in a small size and pain to know that you want to go. While with alt - tab, I can quickly cycle or just go to the last which is often I want to go to.

  It is one of the major issues Mac usability for me.

  Any tips? or addons?

  Thank you.

  Cmd -'

  Curiously, this document has the wrong shortcut. Keyboard shortcuts in Mac - Apple Support

  They have to move to the next application window is to go to the previous application window.

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• I created a Web site and it is actually connected live. My login is working locally, but it does not work online. Could you please help me?

  I created a Web site and it is actually connected live. My login is working locally, but it does not work online. Could you please help me?

  Hi Hervé Joseph,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the MSDN Internet Explorer development Forums.

  Please post your question in the MSDN Internet Explorer development Forums