Allowing the sounds of navigation in Explorer file Win 8

Similar Questions

• How to allow the user to insert an image file

  Pro 10 using when I test in pro I can insert any file that I like, when I try in the drive I can only select the PDF files.

  Also on a side note how do I give them the opportunity to see the clear image button I know this isn't event.target.buttonClearIcon ();

  It's the JS I use

  Prompt the user to select the file to display on the button

  event.target.buttonImportIcon ();

  Evil. It will work in Reader (XI or higher), but you will only be able to select the PDF files as the image. 'S done it on purpose by Adobe.

• Please help I accidentally deleted the sound from my computer

  I have a xp computer

  Hi shanna,

  There are a hundred things that might be responsible for you no longer have sound on your computer (driver/firmware/software equipment problems, hardware problems, change settings, simple things like the sound is turned down or file corrupt system mute, malware, and many others).

  The way simplest and quickest way to fix this is with the system restore.  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial56.html.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  I hope this helps.

  Good luck!

• Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero. »

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  ====================================
  After making your change did you left click... Apply / OK?
  John Inzer - MS - MVP - digital media experience

• The sound allows you to check the default speakers. However, some applications use some speakers while other applications use different players.

  I produce several channels on mogulus. (see http://theallyvideo.blogspot.com/)

  I use a HP desktop computer smart touch and a few laptops from Sony to run the application studio to mogulus.com.

  Use the mogulus studio, I can watch multiple video streams live as sources and monitor outgoing video as well. There's my video stream live from other computers/producers in 4 different States more video feeds of my two laptops. NOTE: see www.mogulus.com

  I am running Vista on all three machines. (I found that XP cannot handle 4 video stream, I got up to 9 with Vista.

  Audio wise, it has worked on all three computers.

  Mogulus studio, use Adobe to handle all audio and video.
  I can turn on or off the sound of my guests so I can hear them and coordinate that I then put on the air and see how long they need.

  The outgoing video monitor also has an audio mute button. When using the PC's built-in speakers, it's a MUST to mute the audio monitor outgoing when you go live, and then reactivate the sound when he in transmitting the other guests, or playing pre-recorded clips.

  I also have a Microsoft keyboard with maximum volume down and cut the buttons on my desk. Two Sony laptops have the same keys and worked perfectly, controlling the built-in speakers. The keys make it easier to mute the speakers to use the key mute in the studio during the 'live '.

  I had another option for speakers of inhibition to avoid the Larsen effect. It is to plug headphones into the headphone jack on the monitor.
  I could connect the headset, do some direct ads, spots a show pre recorded, disconnect the headset and wander in the 'studio' listening to the show through PC speakers.

  So far has worked flawlessly, with two small problems.

  • (1) I sometimes forgot to mute the speakers when I spotted my local webcam and microphone. This would cause comments as soon as I saw the video and it came out alive. The microphone pick up the sound from the computer speakers.
  • (2) the microphone integrated into the HP desktop computer doesn't have a good sound. The mic's Sony are OK, but too far from my mouth to provide good storytelling.

  I decided that the Microsoft LX3000 USB integrated boom Mic headset would be the perfect complement to solve these two problems. I bought three of them, so I would have them on computers cell phones too.

  I installed the LX-3000 CD according to the instructions. Then I plugged in the USB cable to connect the headset/microphone.

  The sound of the headphones was superb. The boom Mic on the headset is a huge improvement over those built in monitors or webcams.

  Mute the Mic and speaker volume up/down on the cord of the LX-3000 is a convenience too.

  Use the headset no sound PC speakers. So, the echo is therefore more a problem.

  Use of the helmet, it is not necessary to mute the speakers. They are now closed all the time now. So, I go live, make an announcement, then play a prerecorded segment.

  That's where everything went south.

  I take off the headphones so I can take a coffee. I realize that now, I have no way of controlling the segment recorded through the speakers. I have no way of knowing when the segment is about to finish and I need to rush to the computer to make the next segment or live announcement. Being attached to the PC by a foot 3 cord isn't good at all.

  I try to do what I did with the analog headphone. Unplug the headphones to re - turn the speakers.
  No luck there. The speakers are still silent.

  I plug the USB headphones in. NOW I have no sound through speakers or headphones. The microphone in the headphones works well. like the mute of the microphone on the cord of the headset. Reduction in the volume of the buttons on the headset cable move the sliders up and down in the windows sound mixer, but no sound anywhere.

  I re - start.
  Now I get sound from the earpiece. But, not the speakers. All the volume keys on the keyboard, monitor and headset cable + / up and down the volume sliders but have no effect on the speakers or headphones. The helmet is at full volume all the time and PC speakers are silent.

  I look in the Control Panel, "speakers". I see that the 'helmet' has a green check mark and don't "speak". I select speakers and press the button "default". The speakers now have a green check mark.
  No change...
  I reboot...
  Now, the speakers work, but the headphones does not work. Volume controls move the sliders, but do not effect the speaker volume. None of the buttons mute function.

  This is totally unacceptable. The only way to switch between speakers and headphones is through the re-booting the PC and Control Panel. Cannot do when playing a mixture of 15 the second live commercials ads and 30 seconds.

  This is where it gets weird.
  
  While in Internet Explore on the page of mogulus studio, or Flash media encoder, the outgoing audio monitor goes to the HEADSET. If I start another copy of Microsoft Internet explore and reveal my mogulus channel drive, the sound of it goes to the PC SPEAKERS.

  Looking at the volume mixer, I see that if I select the "peripheral" "as speakers SoundMax integrated Digital HD Audio", there is only one application, the 'Sound' volume control and control the sound of the IE. players page.
  If I select "Device", "Microsoft LifeChat LX-3000" I get two Windows sounds and Mogulus Studio applications"

  I get the same results on two laptops from sony.

  NOW FOR THE QUESTIONS.
  OK, so how can I tell Blender what applications go to what audio output?

  Can I set up so that as the studio flash applications will both headphones AND PC speakers.

  Can I make the speaker MUTE button on the keyboard and screen work as they did and set mute the speakers for PC only. That would leave the headphone speakers all the time.

  Except that how can I at least get the +/-and mute keys to work as they did.

  Thank you
  Bob

  Bob, you can proceed as follows which allows different devices to be chosen for different applications in Windows:

  Close all programs, are preparing to open the first program which will use headphones...
  -Right click on the Volume icon and select playback devices
  -Select the headset as default device and open the program that you want to use this device, it will play on the current default device (helmet)
  -Now right click on the Volume icon and select playback devices, set speaker to the default device
  -Open the program you wish to play on the speakers

  The original program will continue to play on the headphones and the second program will continue to play on the speakers.

  Because of the helmet to helmet USB when you unplug them this device is disconnected (uninstalled) completely, she's not as expected with analog headset.

  Where you disconnected the analog headphone the BIOS of the machine would automatically re - routing the sound to the speakers, I do not think, however, that a secondary feature differentiating the speakers in the headphones would be available in the playback devices in this instance.  This is due to the sound card as the primary and the only device in this case and the speakers/headphones being secondary speakers or all outputs simply.

  You will be able to mute/unmute/volume adjustment for all devices in the Volume mixer (the switch A B device with the menu of the device), but I'm not aware of a way to run a stream audio reading by another device using the commands of its standard Windows at this time.

• Exe Explorer file process uses all the computers memory RAM

  I googled this question in many different ways and read the post until my eyes crossed. Tried several different

  ideas, checks, analyses, etc.

  This is on a Dell inspirion 3847 running Windows 7 Pro Service pack 1

  a Intel pentium CPU [email protected] Ghz, 4 GB RAM, 1 TB HD (no graphics card or any other card in pci slot)

  a brother MFC7360 n printer connected to the USB port.

  and the HD: (drive C O/S: 855 GB free of GB 909), (recovery E Drive: 17.5 GB free of 47 gb)

  The extent of the installed software is minimal, (only notable is Office 10, digital meal)

  (Digital software dining room is for the POS system), this computer is not the main computer that is running the POS system

  This computer is just linked to the actual POS in bar. (I stop this program and does not affect the)

  problem or situation that we were conducting.)

  (I can give list if necessary other software that is installed).

  And the essentially the only files on the computer (in addition to operating systems, programs, etc.) are Office, "Word files,

  Excel files.

  And a few txt, rtf, pdf, files (very small amount).

  first just noticed recently what happens, but I'm not the primary user on the computer. I checked

  and it seems that no new software or program have been recently installed or changed.  I have a little

  understanding of what the process Explorer exe is and it functions. (NOT a PRO, not a total newbie,)

  If all goes well enough to find help, and not enough to totally screw up.)

  I'll be watching this thread several times per day until solved if need more information, I'll give you...

  Here are the details of the problem:

  random computer freezes, or runs very slowly or get "out of memory" message (during the attempt

  to open any random program) and when...

  I opened the the Task Manager and in "processes" tab, it shows that there is:

  2 examples of "Explorer"exe "running... it uses a small amount of RAM (approx. 10-15 mb)(with nothing)

  Open, other than the Task Manager). Another example of "Explorer"exe "uses (starts on the same amount of)

  RAM use, without having to open anything else) it will start using more and more RAM up to uses almost all

  the available 4 gigabytes of RAM. Also during this process it uses randomly between 0 and 99% of the CPU.

  The CPU usage seems to vary (couldn't see any stable model).  the amount of RAM used begins bass

  then goes very high and the rest standing for this purpose during a random time. (then sometimes descends

  on its own within 1-5 min.). (sometimes does not lower for awhile). More details needed let me

  know, I'll check all speeds or time it takes for the situation to occur, (if necessary)

  TASK MANAGER:

  I opened the location of two Explorer exe files (both take me C/Windows"... ». (same for both

  not a system 32 file, or any other subfolder, just to 'Windows '.

  The two exe process explore "Descriptions" are listed as Windows Explorer.

  I have "Complete the process" towards the 2nd exe explore (one with high memory usage), just that process and she stops to

  a short period of time (and all works well for the time), but even once, it reappears (no exact time frame on how long until)

  Returns), (can check again and again, if necessary), to see if time is right each time to restart the process.

  If I "End process" to the 1st exe explorer (one with normal memory usage), I lose my office. (which from what

  I understand what needs to happen).

  Also get the same results if the process of "End process Tree" for the 1st and 2nd explore exe.

  Checking "properties" of two everything seems the same info. On the 'details' tab shows all of Microsoft, not

  of course, what happens if an info is important. (any info where necessary, I get and publish as needed).

  I know more and different information is no "resource monitor". but was not sure what would happen if, any info of

  It has been necessary.  If necessary you will get what that is. (let me know this as necessary).

  I've scanned any computer with 3 different anti virus (found nothing) programs

  I ran spybot search & destroy found nothing that had to do with this issue and fix some other issues that we found.

  A little info in 'Folder Options' (the 'windows folders in a separate process to launch' is NOT checked.

  and all the options are defined for the default settings (I think) (not sure if this is important)

  like I said read several messages in various forums (on similar sounding problem)... Some say spoke with

  Microsoft technical support who say 'must be the virus', others say started after the recent "windows update" and others

  say the problem of virtual memory and others say he's changed banks 'office' or the 'thumbnails previews.

  These files, and the other says "shell extensions" are the problem. (many recommended (ShellEXView), to)

  Disable all non-microsoft extensions). I was not looking for it.  My problem does not appear to be any good

  program, type file running that is causing this. It seems to happen when the computer is idle (I realize there are always some)

  process background or system running) but it doesn't have to be all open programs.

  At this point, I am open to almost any idea or suggestion.  I will continue to monitor the post until resolved and will get a

  In addition to the information required (less the credit card or account info bosses banking info HA!) (HA!)

  But seriously some help, thoughts, ideas or directions to another post with response, would be greatly appreciated.

  THANKS FOR ANY HELP!

  Hello

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause of your problem.

  If it helps, try the methods and check them off below.

  Method 1

  As you mentioned in your message that your PC is slowing down or freezing then you can automatically diagnose and repair problems that slow down your computer by running the fixit provided in the link below.

  http://go.Microsoft.com/?linkid=9740820

  Additional information:

  For more information you can check the link below:

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286

  Method 2

  If the problem persists I suggest you to try the different steps in the following Microsoft article and check if this may help. You can skip the steps that you have already tried.

  Optimize Windows performance

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Running Microsoft Safety Scanner: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  Kind regards.

• Since the update Windows 10, my CS5 Photoshop created jpg are no longer visible in Windows Explorer (File Manager)

  Since the update Windows 10, my CS5 Photoshop created jpg are no longer visible in Windows Explorer (File Manager).  I have reset Photoshop like application default for jpg files, rebooted.  Nothing has changed.  The ideas people?

  Hi R_Kelly,

  Hidden folder/file settings was the first place, I checked and kept checking each new reboot.

  I have copied below my temporary solution I posted in another forum thread.

  See point 7.  I found a way to make it visible again.

  1. I can see all jpg files created before Win10 update AND all the jpgs created by other programs, other than Photoshops after Win 10 update.

  2 Photoshop cannot see the newly created Photoshop created jpg files in the file picker at all since Upgrade to Win 10.  I've never had a problem of invisibility of file before winning 10 update.  My hidden files were always checked to be visible.  However, Photoshop can open if listed files in a basic text file search in Windows Explorer in the path of the file "recently used".

  3. the files are not visible or clickable at all in Windows Explorer tree or the Photoshop file selector. They become open and visible when listed in a basic text file search in Windows Explorer in the path of the file "recently used".

  4 Microsoft Office applications can't see the new Photoshop created Jpg files in file, only pre Win 10 update pickers jpg created by other applications and versions.

  5. the problem occurs only with Photoshop jpg created after the Win 10 update.

  6. I checked the settings "Show hidden files, folders and files of the operating system", and they remain as they were, which allows all the hidden to visible objects.  I kept the visibility settings files in this way since the early 1990s.

  Temporary fix below *.

  7. I did yet another simple search of the text Windows Explorer, he finds invisible jpg files less all links 'recently used' who were there yesterday (2nd day after I created the files), I checked the location of file properties file and it entered the original file I saved their.  Using a right-click of the mouse on the file to bring up the menu actions and file properties, I was able to copy and then paste the file into another directory.  I jumped on the directories to see if it remains visible and he (Yes). The new copy is now visible to the pickers of file in Photoshop and Microsoft Office applications.

  LizzyD

• Isolated from network, but still allow the possible file transfer

  Hello

  OK, here's my question... I was not able to find a way to do the following .iso exception which is a pain.

  I want a totally isolated network and yet the ability to copy and paste files to and from the network isolated.  I know it's a bit unintuitive sounds counter but the model I am looking for is similar to VM Workstation where you can completely isolate VM customers and yet you still have the ability to copy files on the isolated network via 'VM actions' to the host or access to CD-rom/floppy of the host.  This model provides access to files via a different mechanism than the network card.  Director of the laboratory has any means to do the same thing?

  My goal is to create a fully functional domain with DNS, DHCP, Wins, etc and I want absolutely not exposed to the public network, but I'll need to have installed the media files and other files in the isolated network.  Any thoughts?

  This may be exactly what you are looking for however it may be enough to solve your problem. Consider the diagram below.

  Set up your machines isolated on the Green Network (network emulation).

  Set up a gateway machine that affects both networks similar to the 'Router' machine above.

  In your case, the machine that affects the two networks could double as a file server which has planned its actions on both networks. Basically, this is equivalent to establishing a gateway that connects two networks.

  The illustration above came from a library of test that allows us to inject the network latency in a connection. The "Router" machine is a simple CentOS Linux box running Linux, the traffic control (tc) to change the settings of latency on each of the two interfaces Ethernet to the router. In your case, instead of putting a router, you could design your own gateway + configuration of the file server.

  In Windows networks, I also put a VPN router configurations and just used MS PPTP VPN connectivity in the network of "isolated." Both techniques work.

• What modules and extensions I disable and enable to allow the files to download for the email as attachments?

  Whenever I try to attach a file to an e-mail, I get the error message "your upload of file failed, please try again". I use Windows XP and have deleted Firefox and reinstalled the browser to the latest version, but also a previous version. I wonder if an add-on or extension must be disabled or enabled allowing any file to be attached.

  Worst case senario is to use error. All disable and enable a.

  Update your plugins to the latest version. Make sure you are aware:

  • https://www.Mozilla.org/en-us/pluginCheck/

  If you see problems see also:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Firefox allows the printing of files PROTECTED on my server. WHY?

  All other browsers RESPECT the fact that a PDF is password protected and does NOT allow this file to be printed. Fire Fox violates this rule, and let's users simply of pass protection and print the files. It really SUCKS! He should fix it to conform to current practices. Is this corrected?

  John, your response to:
  "Basically if the image is published it is likely to be copied in one way or another." Perhaps consider tattoo and or only provide copies low-resolution images in these pdf's.

  I will finish this issue. Anyone who wants to give you detailed perhaps advice do in your original thread

  Firefox allows the printing of files PROTECTED on my server. WHY? / issues/992183
  _{change Link to previous post ~ J99}
  I could certainly copy an image from a pdf file posted or downloaded by browsers other than Firefox. »

  WON'T. I speak NOT of the IMAGE being copied from a screen. This, of course, can be done by anyone. What I'm talking about you, is that FIREFOX, unlike all other browsers, ALLOWS you to print a PROTECTED PDF FILE complete. This should NOT be and this issue should NOT be closed and just brushed side because Mozilla has a MAJOR BUG in their software. Your program should be corrected in order to RESPECT the protection of a file and NOT allow it to be printed in its ENTIRETY.

  NO SATISFACTORY SOLUTION HAS BEEN POSTED. FIRE FOX IS BROKEN AND NEEDS TO BE REPAIRED. PURE AND SIMPLE. DO NOT WHITE WASHING A CONCERN MOST OF YOUR USERS!
  Richard plant

• where did the sound when I installed 10.11.4?    System preferences do not allow to do me anything for the sound preferences.

  where did the sound when I installed 10.11.4?    System preferences do not allow to do me anything for the sound preferences.

  Are there no icon preferably for sound?

  

• I just download v4.0. How can I get the third arrow back button navigation, which allows the selection of a page forward or back?

  I just download v4.0. How can I get the third arrow back button navigation, which allows the selection of a page forward or back?

  Don't know how to get the exact button back (sorry) I dig around too much to do...
  But! Today, I found by chance that by clicking and holding on the back button the same box to popup in last-12-sites and you can stream on the list to return to that particular site.

  Not exactly what you (and me) tried but at least the functionality is there.

  Good luck!

• the sound card for the Pavilion Slimline S3300T will allow me to record audio from the internet?

  I have a Pavilion Slimline S3300T. KC833AV prod # #ABA. OS vista Home Premium 32 bit.  The sound card will allow me to record audio directly from the internet?

  The sound card is not big thing to do with it, but there are third party software out there that will allow you to do.

  WaveTap is recommended by LifeHacker.

  Here is an article on their website explaining how to use it:

  WavTap Audio recordings of your computer by pressing a keyboard shortcut

• I see a file, when I play the sound comes on but no picture any suggestions thanks

  I downloaded a dvd of my home movies that I can see the files, but some play that for 29 seconds and one that says it's a little over an hour just plays the sound, even if I see the picture of him on the record at the beginning.

  Hello

  ·        What operating system is installed on your computer?

  ·        What is the type of file you are trying to play?

  ·        What application are you using to play the file?

  ·        Are you reading DVD file or you saved the file on the computer and then play?

  Method 1: If you play the DVD in Windows Media Player, then run the troubleshooter below and check if it solves the problem:

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Note: applies only to Windows 7.

  Method 2: Alternatively, you can try to install the codec for the file type and check if it helps:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Windows Media Player frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-frequently-asked-questions

  Note: applies to Windows Vista and Windows XP as well.

• I converted a WMV to SWF format and I can't hear the sound in Internet Explorer 8, he plays very well in other software.

  I converted a WMV to SWF format, but I do not see the video. I hear no audio in INTERNET EXPLORER 8. The audio works fine in other software.

  Hello

  (1) you are streaming the videos on Windows Media Player online or just play them online?

  (2) have you installed and updated plugins like Adobe?

  I suggest that you try the methods below to resolve this issue.

  Check whether the sound is enabled in Internet Explorer:

  a. open Internet Explorer.

  i. click on tools and then click Internet Options.

  (b) switch to the "Advanced" tab

  c. scroll down to the 'Multimédia' heading

  d. make sure that "Play sounds in web pages" is checked. Click on 'ok '. Restart Internet Explorer.

  Let us know if that helps.