alpha c full OS dev
does anyone have this file? OS 10.1.0.1483 for DEC
solved
Tags: BlackBerry Developers
Similar Questions
-
"Alpha device blackberry 10 dev program ended? What's wrong?
Today, after I turned on my dev alpha device I've seen this screen, I could not get into the operating system, what to do? ALSE satisfy everybody do this?
Others have had this problem this week.
What has worked for others is to close and restart your DevAlpha device, and the message must clean up.
Some had to do this several times.
Don't forget, these devices have been set for a 'dead' date which was extended until the end of this year.
-
Alpha C dev problem - alpha device blackberry 10 dev program is over...
I got this message after I upgraded to the latest firmware and now it won't go away, even after a reboot. Also tried to re - load the firmware, but no luck.
Help, please.
Update on this problem:
My problem has been resolved, but it took a replacement of the device to solve.
I'll be shipping the defective unit to BB, so I hope they can figure out what went wrong and prevent other developers.
-
Question of BB10 Dev Alpha: debugging token is invalid
I'm trying to get a token of debugging on my dev alpha device and it just cannot work. I can create, validate, and install the token, but it generates an error: debugging token is not valid. Or not applicable for this device.
10.0.4.197 OS version
Build ID: 196525
PIN: 29D939F4
Start: 28 June 21:32:34 UTC 2012
I use BlackBerry 10 WebWorks SDK 1.0.0.15
I just restarted the device. It is currently 21:26 according to my computer clock and the BB10 clock is synchronized with the clock of my computer... it of doesn't look right... the listed start time is 5 minutes in the future.
Here's what I did.
blackberry-debugtokenrequest -storepass storepass -devicepin 29D939F4 debugtokens\BB10_Dev_Alpha_debugtoken_29D939F4.bar
Info: Debug token created.
blackberry-debugtokenrequest -verify debugtokens\BB10_Dev_Alpha_debugtoken_29D939F4.bar
Issue date: 28 June 2012 02:02:59 CEST
Expiration date: 28 July 2012 02:02:59 CEST
Features:
702102004Info: Debug checked token.
I checked the device PIN above (702102004) is correct. This is the decimal version of my device PIN (29D939F4)
I tore the debugging, and here's the manifest token:
Archive-manifest-Version: 1.2
Archive-created-by: BlackBerry BAR package v1.4The package author: XXXX
Package name: debug.token
Package version: 0.0.0.8
Package-Type: debug-token
Package-author-certificate-Hash: XXXX
Package-author-Id: XXXX
Package-Id: XXXX
Package-Version-Id: XXXX
Package - Issue Date: 2012-06 - 29 T 00: 02:59ZDebug-token-system-Actions: run, multi_window, multi_instance, run_air_native, run_native
Debug-token-expiration Date: 2012-07 - 29 T 00: 02:59Z
Debug-token-device-Id: 702102004I was thrown for a moment of the date (Date of show-package -: 2012-06 - 29 T 00: 02:59Z) until I realized it was just
my current time converted to offset - 0. I am currently in Toronto, where it is now UTC - 4.
blackberry-deploy -installDebugToken "C:\Program Files (x86)\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.0.15\debugtoken.bar" -device 169.254.99.117 -password password
Info: Send request: install Debug Token
News: Expired session reset
Info: Send request: install Debug Token
Info: Action: install Debugging token
Info: File size: 2273
result::successYet, the device don't like this token. Here is the result.
Any ideas to know what could be the problem here?
Thank you
Stem
Rod,
I had the same problem with my alpha chips and debug dev. Setting date/time is the source of the problem.
Here is the fix:
- The mode of development
- Set your date/time to June or the date in the past.
- Check your token security and debugging
- Debugging token becomes valid
My date is June 25
Let me know if this solution worked for you! Worked for me.
-
Q10 issue: call BlackBerry World
I'm trying to make a link to our page of Blackberry World of Q10 application vendor. It works on Z10 correctly but Q10 begins the World of Blackberry app and shows a black screen.
I invoke with: appworld://vendor/
Any idea?
You have applications that are supported currently Dev Alpha C or Q10, out in the world of BlackBerry? I imagine that the Alpha C and Q10 Dev will filter applications that are not built/released for them.
In my app, I see my name of the seller and a back (with a black screen between the 2) button when I open my page of the seller in the world of BlackBerry on the Dev C Alpha, but I see all my apps when I open on the Z10. My applications do not yet support the Dev C or Q10 Alpha.
-
Selection of the target profile?
I use win 7-64. I have a Sony (Zeiss) 55 mm/1.8 ZA lens. Camera Sony Alpha 7R (full screen)
I start the Sony FE profile download and select the lens. Normally, it works well and Lightroom comes automatically with the correct target/profile.
Sometimes I download new photo (exactly like I always do) and the selection of Sony FE lens is not found. Only Sony and automatically zoom is selected and nothing else is available to choose. That's why Lightroom automatically select the lens bad nothing else is available, while most of the time it works perfectly and nothing changed in the download procedure.
Any solution, bug?
Yes indeed, the answer is very simple, but someone needs to put you on the right track! Thank you for that.
I'll look into the details.
For what is Hasselblad is I look further. I can build my own one, but it is very difficult to make a good calibration, particularly on extreme good lenses like Zeiss from Hasselblad lenses.
In any case, I'm happy to close this call.
-
I wish I had a mask only for a time on my images. I mean, it's... I have 30 seconds of footage, I want to leave say 10s and 15s to see that some of my images, the rest when I want images unmasked. After this point, I don't want anything hidden more head room. How I managed to do this was by double-clicking on the rectangle tool (this mask set whole sequences). Can I use hold keyframes to change the mask at the desired time. Is there a way to say just After Effects to turn off the mask (see the sequence with no masks) on some images. Thank you
There are about a dozen ways I can think of to achieve your goal.
- Use the track matte and simply animate the opacity. You could use a duplicate of your images with a mask or just draw a shape layer.
- Put two masks on your film. The first would be created by selecting the film layer and double click on the rectangle tool. The second mask will be drawn to hide the box allowing you to hide or show. Then the mask modes would be possible to assign to add and animate you the opacity of the rectangular mask.
- Draw a mask and then animate mask expansion. This would give a nice effect if you also anime feather mask as the expanded mask.
- Use Effects > channels > presets and animate Alpha Set of Alpha to full
- Use Effects > channels > channel shift and animate take Alpha's Alpha to full
- If you use CC 2014 you could use effect > channels > presets with alpha set to Off, then add an option of composition using the mask and animating the opacity
I could go on and. If there is no animation required for a mask I almost always use a matte. I find much easier to deal with for most of the projects.
-
Features of Alpha dev - am I missing something?
Listening to some sessions recorded at the BB Jam Americas, I wonder if Dev Alphas others are less limited than mine... So, I just want to check:
I'm under 10.0.9.388 - it's the latest build, right?
I've got:
- Contacts
- Browser
- Calendar
- BBM
- AppWorld (demo only)
- Games (something to do with Scoreloop, I think)
- Camera
- Parameters
- A 'coming soon' page where will be the hub
Everyone keeps raving about the predictive keyboard and I've seen the videos of him, but I do not have ' never get it on my DevAlpha - I can see and change the settings for the predictive keyboard in settings, but I never receive any predictions or self-corrections anywhere.
Only when everybody is - or y at - it something wrong with my camera?
(I'm just wondering, because with the announcement that the apps presented in October/November would preferentially star, it seems we should have everything that we need to apply the wonderfully integrated apps, they're asking for... but I'm not sure how I can invoke (& test) something that's not here yet.)
Thank you
Anna
My app: Get set - get up! Get ready for the revolution snooze.
You have the game expected of applications. 10.0.9.388 includes all of the features that made a demo in the Keynote of conference BlackBerry Jam. Some press saw the latest releases with the experience of a full keyboard as well.
-
BB Dev Alpha - another problem after security wipe
Initially, the unit has lost ability to connect on the computers (it's not recognized on any computer to which it was connected).
So I decided to do a security wipe. After the wipe whenever the phone tried to load the operating system, the progress has reached 100% and stopped. I downloaded the autoloader driver DevAlpha A / B 10.1.0.1485 and tried to reinstall the operating system with its help, but he refused to install with error messages "OS is not material", "this file does not match the device. Then, I downloaded an older version of dev alpha drivers (DevAlpha 10.0.10.263 autoloader), but he got the same errors.
After updating these attempts of the device reached the start progress 100%, then restarts, once and once more. Software link cannot start the firmware recovery process. It is also interesting that the device hardware ID is not listed here.
I have read a number of topics dealing with similar issues of DevAlpha on the support forums, but some of the solutions are outdated and others do not work for my device. Can someone give advice? Thank you
P.S. here is the log of 10.1.0.1485 driver:
C:\Downloads\Programs>Autoload-DevAlphaA_B-10.1.0.1485 RIM Wireless Device Command-Line Auto-Programmer Version 3.10.0.29 (Win32) [Apr 1 2013 19:59:10] Copyright 2012 Research In Motion Limited Connecting to Bootrom: Resetting Device: Connected [ Uploading RAM Image 0x80238984 ] [############## 100 ##############] QCFMv1/v2 Hybrid File containing: Radio Signature Trailer: EC521_512 Signer: 0x48584E51 (QNXH-OS-1) EC521_256 Signer: 0x4C584E51 (QNXL-OS-1) [ Writing 0x006E0000 ] [############## 100 ##############] QCFMv1/v2 Hybrid File containing: IFS, OS, User File System IFS/OS Version: 10.1.0.1485 DEV Hardware ID: 0x06001A06 RIM BlackBerry Device Metrics Version: 3.18 Build Date: Apr 13 2013 Build Time: 10:23:20 Build User: ec_agent STP Protocol Ver: 0.0.4 (release OS) Signature Trailer: EC521_512 Signer: 0x48584E51 (QNXH-OS-1) EC521_256 Signer: 0x4C584E51 (QNXL-OS-1) --> OS does not match hardware. (C: 0X06001A06 H: 0X8500240A O: 0X051D0001 ) Error: Failed to load images. Error: This file does not match this device!
And here is the log from 10.0.10.263:
C:\Downloads\Programs>Autoload-DevAlpha-10.0.10.263.exe RIM Wireless Device Command-Line Auto-Programmer Version 3.10.0.15 (Win32) [Dec 20 2012 22:31:59] Copyright 2012 Research In Motion Limited Connecting to Bootrom: Resetting Device: Connected [ Uploading RAM Image 0x8022E584 ] [############## 100 ##############] QCFMv1/v2 Hybrid File containing: IFS, OS, User File System IFS/OS Version: 10.0.10.263 DEV Hardware ID: 0x06001A06 RIM BlackBerry Device Metrics Version: 3.18 Build Date: Jan 27 2013 Build Time: 11:33:05 Build User: ec_agent STP Protocol Ver: 0.0.4 (release OS) Header Version: 2.0 Num Chunk Headers: 6 Headers Length: 65120 Chunk Header: Type: 0x06 Chunk Header: Type: 0x08 Chunk Header: Type: 0x06 Chunk Header: Type: 0x05 Chunk Header: Type: 0x09 Chunk Header: Type: 0x89 Signature Trailer: EC521_512 Signer: 0x48584E51 (QNXH-OS-1) EC521_256 Signer: 0x4C584E51 (QNXL-OS-1) --> OS does not match hardware. (C: 0X06001A06 H: 0X8500240A O: 0X051D0001 ) Error: Failed to load images. Error: This file does not match this device!
This means that you run z10 full os on your alpha dev b. To correctly flash has another version to it, make sure you download Z10 STL100-1 automatic loader, no Dev Alpha B one.
-
Video HTML5 don't play online on Dev Alpha after update to 10.9.9.339
Dev Alpha used to play HTML5 videos inline (similar to the PlayBook), which has helped some cool design if you were paying attention.
After the update to 10.9.9.339 videos are no longer play online (the device trying to play their full-screen and displays the video controls even if it has not been specified according to the HTML5 specification), and the layout is broken.
I wasn't able to find a way to force videos to play online as before, nobody knows how to do this on a device BB10?
Here is a simple example of HTML code:
Grateful for your help!
Check out this thread:
-
Resolution of the smartphone BlackBerry Dev Alpha 10
What will be the alpha of resolution Blackberry 10 dev device? It will be same as Simulator? How he gona be in real aircraft?
Need for clarification
Dev Alpha device resolution is 1280 x 768. The real device resolutions will be as follows:
1280 x 768 for the first full touchscreen device
1280 x 720 for future devices full touchscreen
720 x 720 for models with a physical keyboard.More information about this is located in the following developers blog:
http://devBlog.BlackBerry.com/2012/08/BlackBerry-10-screen-resolutions/
I hope that info helps!
-
Blocked dev Alpha B PIN device
My Dev Alpha B has been blocked recently. I already wrote several times to:
Especially I have not yet received response. [email protected] guys have even asked to confirm if the device is still blocked but then he stopped also reply on my email. Can someone help from Blackberry, please?
[email protected] finally unlocked it
-
Impossible to test in app dev alpha A
Hello
I need to test in-app on my alpha dev A. I purchase followed all of the steps for testing in sandbox mode. But when I try to add the release that it does not show the option for alpha dev and so I get the "Not available for this device" message when trying to download app on app World sandbox mode.
I need to test in-app. How can I do?
I've just loaded Alpha-A Dev with the last external beta, 10.0.10.263 and was able to find and install downloaded applications only for Z10 models that dev Alpha was not as a device supported successfully.
After making the changes on the supplier portal, it may take up to 6 hours for those on the device because of caching.
-
debug the symbolic question missing date or in the future feature alpha #dev
Hey please help
I installed a debugging token in my alpha dev unit and added many examples of applications, all running well!
but all of a sudden because of the connection with any other pc or something I don't know he said if poster devlpmnt than debug token mode is installed but its is not valid
error is friendly date in debugging token is missing or in the future!
Error No. East of 881
Please help I tried new chips from the back to the top and also tried to re - register using new keys to the SJC!
also removed debug token frm my camera but still the same error please help
Hi, I also have just got my alpha dev and having the same problem and fixed it.
There are two changes that I've made, so I do not know which set:
1 change the date, clock and time zone in your alpha camera to adapt to your computer
2 open the SDK software, choose the menu Run > Run configurations... > download tabs > Uninstall, then install...I think that the first solution will solve this problem, but if not then try the second solution
-
Hi all
I had a problem to install channel BBM in my Dev Aplha C.
Just curious, that dev Alpha C power to install BBM channel? or not?
If allowed, how can I install it. coz I already got the keycode and also the keycodeloader file.
but it does not work to download BBM channel in my Alpha of Dev C.
How do I?
Thank you before...
You can go directly to the betazone and registered.
You can find the link to install BBM channel.
want to help you.
Maybe you are looking for
-
Satellite U200 - 10 H - pattern of the need for the sound card
Schematic map his need for Satellite U200 - 10H. Microfone don't supply no work, there is a short circuit or an electrostatic.
-
How to rid error 0x800ccc17 blocks the sending and receiving of mail
I'm administrator, have opened the mail in windows for years without having the password. Child wanted to do something with the camera and was needing a password when visiting I typed in and I--decided I had ever before so deleted. Now error ox600ccc
-
How can I connect to a remote scanner (Hp Laserjet 2940 printer on network) using Windows 7 Fax/Scanner. It says scanner is not connected, but I am able to print remotely.
-
How do I synchronize ipad2 for laptop
How can I sync iPad 2 with windows 7 laptop?
-
I use headphones on my computer, but lately it dosent play a sound if I: start the computer and set it to Hibernate, then identify yourself again, he says that "no headset is plugged" and made this little troubleshoot thing dosent do anything except