Selection of the target profile?

Similar Questions

• dynamically start VI selected on the target of the PSC

  I'm under LabVIEW 2011SP1 on a Win7 machine. My application uses MFC to monitor temperatures and control 6 radiators (PID feedback) during heating and soak segments of a profile. Cooling segments are passive, without control aspects, I need monitor temperatures until some set point is reached, then another segment heating and dipping. I have coded segment heating, from set point via the shared variables in network to the PSC (cFP2200) controller. My thought is to write a second VI to follow the phases of cooling passive thte, but then I have to be able to switch back between the two screws on the target. This is the right approach (and if so how)? Or would it be better to make a huge VI to manage the two scenarios?

  TIA

  lmd2

  You switch between them or you would be able to run in parallel with each other?

  Of what you have described, I'd written a VI main to control the VI you've written as well as the new VI passive surveillance as the Subvi.

• Its Smartphones Custom Contact SMS blackBerry overrides his Email selected in the active profile

  OK - I've been googlig it ALL morning. I would like to know if there is a fix for this.

  I put a bunch of ringtones customized for friends and family, as I always have with my previous Blackberry (8310, 8900 and 9000) devices...

  With the 9700 When you change a ringtone to contacts, you will need to change the sound of their messages. Now I didn't have different sounds for different contacts when it came to mail, so, I selected just the noise I had chosen when customizing my normal profile in the hope that all texts of all users play the same sound. Text messaging works very well. However, emails... not so much. Because I HAD to change their sound messages, now - whenever I get an email from one of the contacts that have a custom ringtone, the tone of the text goes off instead of the email, I chose! I have emails and texts is going to separate folders... I guess this happens because the custom only option it gives me is to change users 'message' noise and not "sms or e-mail.

  I want to have custom ringtones for people when they call me and a tone for all sms/mms and a tone for all the emails. I am angry.

  I know that other people have this problem... Help someone. I want to throw my phone = /.

  [email protected]

  PIN: xxxxxxxxxx

  EDIT: Personal information removed - information such as the PIN & personal e-mails are prohibited for safety reasons. Please private Message (MP) this user.

  Hello katierestes,

  This feature is by design, custom messages alert applies to all messages (email, SMS, MMS), there is no option to specify TEXT of e-mail when you customize the alert contact.

• Where are stored the camera profiles?

  Using Windows 7 Ultimate 64 bit PS CS5 Extended with LR 3.

  I searched my hard drives (which are all indexed) for hours and can't find where the target profiles are stored.  Googling for answers various suggestions of folder, but none are on my machine.  I can't locate all PCL files, all files .dcp, .dcpr files.  There is no folder called lens profiles or LensCorrections no permuations of these names.  No registration in one of the Adobe directories with names of lens or camera in them.

  I also downloaded and installed the software creator of lens in the hope that he would point to where the profiles are stored, but it does not work.   I'm totally stumped.

  Where I would put a LCP for LR or PS file could find them?  Both programs display profiles for my camera and my lenses some, so you have profiles stored somewhere on my system?

  Thank you!

  Profiles of the camera and the lens are stored in

  C:\ProgramData\Adobe\CameraRaw

  on my Windows 7 64-bit computer. Windows Search won't find it because it is excluded from the index.

• Part 3 EtherCAT Slave: importing XML Device Profile succeeds on host but fails on the target

  Hello

  I'm trying to control a 3rd party via EtherCAT servo drive:

  • Master: NOR-cRIO 9024
  
  
  • Slave: Beckhoff AX5203

  I downloaded the files of unit on official website of Beckhoff Description: http://www.beckhoff.com.au/english.asp?download/elconfg.htm (Beckhoff_EtherCAT_XML.zip)

  I followed the instructions to http://digital.ni.com/public.nsf/allkb/FDA1318A8909D02C862574510060DB62 to import the profile description of the device.

  Curiously, the import was successful for the host (and I can now access this device in the LabVIEW LVPROJ file), but it failed for the target.

  Why could this be? (There are no diagnostic messages)

  

  Hi JKSH,

  Looks like you are using NOR-Industrial Communications for EtherCAT 2.7 or later. What is you project connected to the target when you try to import the file? How are you connected to the target? What is your firewall block FTP transfers? Do you need the ability to programmatically discover slaves EtherCAT (such as DSM or using the VI of Modules Refresh)? If you just want to program the EtherCAT Slave in the LabVIEW project, import the device description files to the host is all that is needed.

  Best regards

• Unbound invocation open the target application selection worksheet.

  Hello

  I'm looking to create an invocation to share a link, but also a picture. I want to open a worksheet that contains apps to draw in order to share an item.

  Q_INVOKABLE void DataItemModel::shareImageUrl() const
  {
   bb::system::InvokeManager manager;
   bb::system::InvokeRequest request;
   request.setAction("bb.action.SHARE");
   request.setMimeType("text/plain");
   request.setData( this->getShareUrl().toUtf8() );
   manager.invoke(request);
  }
  

  Q_INVOKABLE void DataItemModel::shareImage() const
  {
      QString dir = QDir::tempPath() + "/image.jpeg";
      QFile file(dir);        // Saving the image to the file system because the invocation requires it. My images are    downloaded and kept in memory only
      if (file.open(QIODevice::WriteOnly))
      {
          file.write(m_image->getRawImageData());
      }
  
      bb::system::InvokeManager manager;
      bb::system::InvokeRequest request;
  
      request.setAction("bb.action.SHARE");
      request.setMimeType("image/jpeg");
      request.setUri("file://" + dir);
  
      manager.invoke(request);
  }
  

  Here's how I call from QML

                //Inside a ListView...
               listItemComponents: [
                   ListItemComponent {
                       type: "item"
                       DataItem {
                           contextActions: [
                               ActionSet {
                                   ActionItem {
                                       title: qsTr("Share image url")
                                       onTriggered: {
                                           ListItemData.shareImageUrl();
                                       }
                                   }
                                   ActionItem {
                                       title: qsTr("Share image")
                                       onTriggered: {
                                           ListItemData.shareImage();
                                       }
                                   }
                               }
                         ]
                   ]
  

  In both cases, it only starts the BBM application.

  Since it is a unrelated call, I would expect sheet of selection of the app to show where I could choose NFC Bluetooth, messaging, Facebook, etc. and the plethora of other applications that support sharing.

  To aggravate something like it for a sharing URL works from QML (I wasn't able to share an Image this way via QML however). He opened a sheet with a list of applications in the choice. It is totally confusing, because it seems to be the exact thing I've done in C++.

                                 InvokeActionItem {
                                      query {
                                          mimeType: "text/plain"
                                          invokeActionId: "bb.action.SHARE"
                                      }
                                      onTriggered: {
                                          data = ListItemData.shareUrl
                                      }
                                  }
  

  How would open the worksheet selection app using the framework of the call?

  I had this problem as well a couple of weeks and solved it. When you call and independent, the system will select a logon request. You is better to use a call related, but do not specify a target.

  QString path = QDir::current().absoluteFilePath("shared/photos/avatar.jpg");
  m_pInvocation = Invocation::create(InvokeQuery::create().parent(this).mimeType("image/png").uri(QUrl::fromLocalFile(path)));
  
  m_pInvocation.trigger("bb.action.SHARE");
  

• How read the Archive.msf and .sbd files stored on the backup media without restoring the current profile?

  I have stored vast e-mail Archives of files on backup media to free hard drive memory. How to read Archive.sbd and Archive.msf selected files without restoring them to the current profile? Can I create a new profile and restore it temporarily?

  Tbirds mail-container has a pair of files

  (1) - name of the container (with no extension) here are all the emails one after the other.
  (2) container - name.msf one type of index, if deleted itwill be restored

  If there is any subcontainers, there is also a container - name.sbd which is a directory (map)
  In this directory there are new pairs or even directories.

  Files without extension is the mbox files. As they exist even when there is simply a directory .sbd and not emails, you need only point to this mbox (empty) file to load the tree entire (folder - map-) use the ImportExportTools add-on.

• Why firefox can not open with the default profile. It should be renamed?

  trying to install "malwarebytes" for extra protection, the Norton toolbar on firefox has been reduced in size by losing my option "Vault". This prompted reinstalling on securities Notion which then prevented the opening of firefox. Internet Explore works well but I use firefox for years so why change. Firefox won't open (even after being uninstalled and downloaded and reinstalled. The message 'your firefox profile cannot be loaded, etc.' following the instructions of your forum, I locate a profile with the word 'profile' embedded file. The word "profile" in the flow path is preceded by a weird name (such as a foreign name). Path =
  'C:\Users\Owner\AppData\Roaming\Mozilla\Firefox\Profiles\bzjajhor.default-1419035389504 '. This file needs to be renamed and can they?

  Please help me to go back to firefox. Thank you

  Do not rename a profile folder.
  It seems that there is a problem with the profiles.ini.

  See:

  • https://support.Mozilla.org/KB/how-run-Firefox-when-your-profile-missing-or-inacc

  This is usually caused by a problem with the file profiles.ini and the profile marked as the default value = 1 in this file is no longer present on the hard drive.

  • Windows: %AppData%\Mozilla\Firefox\
    C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • Linux: ~/.mozilla/firefox/
  • Mac: ~/Library/Application Support/Firefox /.

  You can use one of them to make Firefox/reuse to create a new default profile:

  • Remove the profiles.ini file to force Firefox to create a new default profile
  • Use the Profile Manager to create a new profile
    Use "Choose a folder" when you create a new profile to select the location of a lost profile and recover this profile
  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Can I restore my favorites if they were saved to the same profile on another computer?

  Then my mother one of our computers restored without telling me or backup of one of my favorites. If I signed in the same profile of Mozilla on my computer that I've been on one that was wiped out, my favorites are in the places.sqlite file? If they are, how can I access and restore my bookmarks in Firefox?

  I have also two old files .json I tried repeatedly to import into Firefox by using the function "restore" and installed Friefox 27 to try to use my key to recovery without result. Can someone recommend a method of restoring my favorites that I have not yet tried, or tell me what I am doing wrong? Thank you in advance!

  Press Alt or F10 to bring up the toolbar. Then select
  Bookmarks. Access key is < Control >(Mac: < command >)< shift > B.
  Once the window is open, the top of the page, press the button
  Import and backup. Select export bookmarks to HTML and follow
  prompts and save it in a HTML file. Copy the file to another computer.
  Repeat the above instructions, BUT select Import Bookmarks in HTML,

• Thunderbird does not work properly after copying old content profile in the new profile, what can I do

  My old laptop crashed, but fortunately I got the hard drive out, who now works as an external drive. I installed TB on my new laptop computer. I copied the contents of the old file to profile in the new profile file and start of TB. I have all my files of pace, but TB does nog works correctly. After that connection, it takes forever to load the new messages, when I leave a message to another, the first answer I get is "TB not responding' and after a few minutes, I finally get to the next message. Same story with 'reply' or 'delete '. I already tried to delete the index file and have tuberculosis still indexing message folders, but this did not help.

  I noticed that my old profile files seems to have a sort of double files in the subfolder Mail, old accounts. For example: pop.tele2.nl, pop.tele2 - 1.nl, pop.tele2 - 2.nl. I'm not sure what they are (they seem to hold different versions?) or is it relevant?

  When I search the AppData/Roaming/profiles I'll find it (on the old and the new hard disk as well) but I can not navigate on him (some parents of hidden file)? I checked the rights on the files of my account profile (Administrator rights). I don't know what to do more, so I hope to help.

  Re: for example: pop.tele2.nl, pop.tele2 - 1.nl, pop.tele2 - 2.nl.
  Here's the e-mail accounts for pop e-mail account. If you have several addresses on the same server, it will have the same name but an additional example:-1 appended to the name. If you got an e-mail account, it can also create and add the additional number. Why you have several, I can't say with certainty what caused them without knowing what you have done. The point being, you must have the directory Local pointing to one that is correct and has all your existing emails.

  Profile files are hidden files.
  http://KB.mozillazine.org/Show_hidden_files_and_folders

  Info on profile:
  http://KB.mozillazine.org/Profile_folder_-_Thunderbird

  What local directory is set to the e-mail account?
  "Tools" > "Account settings" > "Server settings" for the e-mail account
  bottom right under "Local Directory"
  It will say something like this:
  C:\Users\User account name\AppData\Roaming\Thunderbird\Profiles\abc12345.default\Mail\pop.tele2.nl

  Copy paste the info on this issue, so I don't know which e-mail account you use.

  How many email accounts you listed in the left pane in the account settings? You have just the one pop email account and local folders?

  What antivirus do you use?
  If you McAfee please read;

  • https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

  How many emails you have in the Inbox folder?
  It is advisable to use the Inbox folder as a mailbox for incoming mail, and not as a general storage. Suggest you create folders and move all the emails in the Inbox in other appropriate folders, then right-click on Inbox and select "Compact".

  Good info explaining what is compaction and why it is important:

  • https://support.Mozilla.org/en-us/KB/compacting-folders?ESAB=a & s = Compacting & r = 0 & As = s

  It is also a good idea to Archive mail older than a few months.
  Implemented for archive by month and keep the structure of archive folders. These emails will still be visible by 'Archives' folder and in your profile, but check-in will reduce the size of files and therefore less memory use during their opening.
  Info on archiving Options:
  https://support.Mozilla.org/en-us/KB/archived-messages

• The FireFox profile e-mail spam

  Got this e-mail this morning. I don't know that it is not yours. My profile E-mail address is marked as do not show.

  Date: Saturday, July 28, 2012 18:14:46-0400
  From: "Mozilla Firfox Award" < [email protected] >
  Re: Mozilla Firefox Award

  Dear: Winner email,

  You have been selected in the price of current Mozilla Firefox which is held this second quarter 2012.We the Promotion Board are pleased to inform you that
  you alongside 9 other lucky winners have been approved for a payment of $1, 2 m Dollars (1 million, two hundred thousand United
  States Dollars only). If you have received this e-mail, this means that you are one of the ten 10 luckywinners.

  COMPLAINTS OFFICER: name: Mr. Fred Moore Courriel: [email protected]

  We recommend also to provide under list information as soon as possible:

  YOUR FULL NAME:
  YOUR FULL ADDRESS:
  SEX:
  AGE:
  COUNTRY:
  OCCUPATION:
  PHONE/FAX/MOBILE:

  We are pleased to have you among our lucky winners.

  Yours Sincerely,

  Ms. Mercy Davis.
  Coordinator online.

  What he has already done to https://support.mozilla.org/en-US/forums/contributors/708534

  firefox.org is not a Mozilla site.

• How can I import passwords from the old profile?

  I had problems with my laptop (do not start) last week and I managed to save some stuff from the hard drive before reinstalling Windows. Now I'm on duty, I don't know how to import passwords from Firefox seems to have changed a little. I managed to restore my favorites, but that's all.

  Also, is there a way I can import my old browsing history?

  Thank you very much. x

  Yes, this place is not the Firefox profile folder, but the location of the folder that contains the files to create a new profile new model.

  See:

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • "Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders.
  • http://KB.mozillazine.org/Show_hidden_files_and_folders

  Go to: Control Panel > Folder Options > "View" tab > under "Hidden files and folders", select "Show hidden files and folders".
  
  To see the file extensions for all files uncheck "Hide extensions for known file types".

  • XP: C:\Documents and Settings\ < user > < profile > \Application Data\Mozilla\Firefox\Profiles\.
  • Vista/Windows 7: C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.

• cannot get past error - could not connect the user profile service

  My HP desktop computer has windows 7 - I can't get past - error message "user profile service failed to connect ' & 'impossible to load the user profile'!"  By clicking on the ICON that displays windows closes and repeats the error message read... a new user account must be defined the user upwards and copy the previous settings account - but I can't get there.

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• ArraytoChannels error 'cannot be added because the channels of the target are not all the same length.

  Hello!

  After the end of my second day of test error, I put this question on the table:

  I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.

  I confirmed that:

  the RowData sizes and the ChannelNames are equal,

  both spend the isarray = true test,

  I change the order of the ChannelNames,.

  I have reconnected/disconnected from the oConnexion every time, nothing has changed.

  Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:

  oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")

  Call OpenSQLConnection
  Set oRecordset = CreateObject ("ADODB. Recordset')
  Call SelectWell
  Call GetWellStateIDs

  Data.Root.Clear
  for j = 0 to ubound(oTables,1)

  sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
  oRecordset.Open sSQLSting, oConnexion
  Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
  for i = 0 to orecordset. Fields.Count - 1
  oFieldNames (i) = orecordset. Fields.Item (i) .name
  next
  oArray = oRecordset.GetRows (-1, 0, oFieldNames)
  Set oGroup = Data .root .ChannelGroups .Add (oTables (j))

  oArray, oFieldNames arraytochannels
  oRecordset.close
  oConnection.Close
  next

  Sub GetWellStateIDs
  sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
  oRecordset.Open sSQLSting, oConnexion
  oArray = oRecordset.GetRows)
  WellStateIDFirst = oArray (0,0)
  WellStateIDLast = oArray (0, ubound(oArray,2))
  oRecordset.close
  EndSub

  Sub OpenSQLConnection
  Set WshNetwork = CreateObject
  oComputerName = WshNetwork.ComputerName
  oDB = "MX2. Player.DB ".
  Set oConnexion = CreateObject ("ADODB. Connection")
  oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
  oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
  oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
  oProvider = oProvider & oDB
  oConnection.ConnectionString = oProvider
  oConnection.Open
  EndSub

  Another clue. If you check using DIAdem

  Microsoft Windows Script Debugger

  you are able to install the debugger in DIAdem.

  It would potentially have shown that the command does not work as expected.

  Sorry for the inconveniance

  Andreas

• How can I change the target directory for NOR-DAQ 6.9.3?

  I try to install NOR-DAQ 6.9.3 on a new laptop computer.  I tried to change the target directory, but the installer does not allow me to change it.  Is it possible to change the directory?

  When you say that the installation program does not let you change the directory target, you receive an error?  In my view, is it possible to change the target directory by selecting the feature in the feature tree, then by manually changing the target directory to the bottom of the installer.  When this is done, a pop up will occur who says a new folder will be created to save the files to.