Alternative to yet?

Similar Questions

• Question on my laptop

  My backspace does not work, when I try to go back he wound work, let me know what I need to do.

  Hey husband,

  I agree with Mike (sometimes and I still need to have mine replaced under warranty); However, before concluding that you need a new keyboard which, if she is no longer under warrany is maybe a bit expensive (and more if you need help), I would check the Device Manager (Start / Control Panel / Device Manager) and see if they keyboard device driver works correctly.  If so, before ordering a new keyboard, I would first try to update the device driver for the keyboard (they should be available on the website of the manufacturer of keyboard).  I would also like to see if the manufacturer can help you with the following tests if you need help with them and also check to see if the laptop has a pre-installed aboard diagostics utility (or if there is one they have available to download) which can test the operation of the keyboard and maybe tell you for some where the shoe pinches.

  Then I would try blowing compressed air in the main grooves (especially around the BACKSPACE key) to see if something got caught in there and who will identify and release the key.

  Then, go to start / Control Panel / ease of access and to activate the on screen keyboard.  Check to see if it works.  If she has the same problem, it certainly isn't a problem with the hardware with the keyboard and the possibility of some type of operating system software problem increases.  If it works, then the possibility of a hardware or device driver problem increases and decreases the chances of an operating system problem.

  If you have another ordinary USB keyboard you can set and use to the place they laptop keyboard, I will try this to see if the problem occurs with this keyboard that already worked very well - if so, the problem is probably not the keyboard, but something related and replace the laptop keyboard will probably solve the problem.  If this proves to be the case, please repost in the following forum: http://answers.microsoft.com/en-us/windows/forum/hardware?tab=all in addition to contacting the manufacturer to see if they can find alternative solutions (since at this point, I would be considering some kind of software problem-probably with the operating system).

  Finally, I would say, if you can, remove the keyboard, clean with a tissue dry and VERY gently clean the keys of the keyboard under the keyboard (mainly key backspace) to replace the keyboard to see if it works now.

  If you try everything before and everything points to a defective laptop keyboard, then replacement may be the only alternative.  Yet it is work first check these alternatives, as they can help identify the problem or solve problems stop you from going in the wrong direction when the results indicate that the problem is maybe if this is probably something else.

  I hope this helps.

  Good luck!

• Yet alternatives CS6

  Are there alternatives to CS6 who don't reincode no video files (MPEG2-DVD, Blu - ray H.264?)

  Michael Sean wrote:

  Are there alternatives to CS6 who don't reincode no video files (MPEG2-DVD, Blu - ray H.264?)

  In my view, DVD architect does not re-encode the files.

  Can ask a friend to test.

• WiFi slow Alternative?

  I have a question about the speed of OS X on a MacBook Pro 15"

  I am running 10.10.5

  Cross checking the material with the used Apple seller I find the map Wi - Fi is only capable of 1.5 megabits per second (Yes mega bits, not bytes)

  You are looking for an alternative to wi - fi.  Is there a dongle or something I can use for this slow Wi - Fi?  I can easily use Terminal to change the values of network to use the new card, but don't know (yet) to be used.

  At this slow speed the MacBook Pro decides he has control available networks once every three seconds.  In addition, no matter what starting an application, login, password, etc.. REQUIRES the MacBook Pro to send messages back on slow Wi - Fi.  Since it is 'Standard Apple' Apple will explain themselves in detail, only "that meets the standards of Apple."  No one will say what are the standards of Apple, but it conforms to standards.

  Can you provide a link to where it shows the MacBook wifi is this slow?

  You have a right speed if you connect via Ethernet to the same network?

  When connected via wifi press post a screenshot of the window that opens when you press on and hold down the Option key and click on the wifi icon in the Menu bar

• Startup fails on Qosmio F20 - alternative to the recovery DVD?

  My Qosmio F20 system restore failed and the OS keeps re-booting and stop alternately. Dare not use the recovery DVDs that I don't have all the files and folders saved yet.
  Don't want to lose them once this system is reformatted. Other options?

  HI Azman,

  First, you will need to identify the cause of the closures (I assume you get a blue screen error followed by a re-boot). You can do this by disabling the automatic restart facility so that the system stops on the blue screen.

  Depending on the error, you may be able to start Notepad in 'safe' mode so that you can back up your data safely.

  Kind regards

• Alternative to MS Excel for viewing and the calculation

  Good evening

  I am looking for an alternative to MS Excel. My use case is:

  (1) collect data using Labwindows CVI

  2) store in .csv files

  (3) with Labwindows CVI to copy data from .csv files into .xls templates

  -some calculations of data is executed by ICB

  -some equations are in the Excel file and get automatically calculated after you paste the data

  -existing charts in Excel templates display data calculated after copying

  Given that the amount of files has grown over the years and data analysis is becoming increasingly heavy, I'm looking for an alternative allows

  (a) possibilities for visualization of data and the flexibility of chaning that later

  (b) calculation within the tool (I don't want to have too many equations hidden in some C programs)

  (c) integration in Labwindows CVI (I can change that... but not quite yet)

  Anyone have a recommendation?

  Thank you!

  Hi ZerMahlMeer,

  Tiara not only allows you to perform a multitude of analyses (very easily I might add) on your data, it provides even the ability to automate the entire data, analysis and reporting through Visual Basic Script.  Another really nice feature of DIAdem is that it copies the data that you import and saves it as. Files TDM that prevents overwriting your original data.  If you did, you might also the scrap of the generation of the .csv file and use the C API of TDMS.  This allows you to save data much faster because of the binary structure of TDMS files and then you can open these files in Excel using the TDM Plugin OR for Excel (free to download) and import natively in DIAdem.

  What you call sounds almost exactly what DIAdem is made.  The only transient pain point can be get used to writing VBS if you don't know the code.  However, most of the things that you do not want to refer to a script (for example data channels) can be simply dragged from DIAdem data portal to the script to generate the script code to access this item.  There is also a script recorder that allows you to perform activities of DTC using configuration dialog boxes and automatically capture this activity in the script, so the rise is also greatly facilitated.

• I just discovered a problem of low disk. Yet, I have a 74.4 GB hard

  Hello

  I have a computer with Windows XP Professional and I just discovered a problem of low disk.   Yet, I have a 74.4 GB hard

  drive and have used only 15.9 GB.   I do not understand someone can help me.   I have a Virus Scanner and

  Registry scanner and I did all the updates to day and automatic updates for Windows.     I'm not a computer Wizard.

  So, please help me!

  Sharon

  Hard disks are disks for data storage that can be divided into one or more partitions (or volumes). RAM is a card that is placed in a memory slot in the motherboard. The motherboard may have a number of slots, often 2 or 4. As a backup of the system RAM memory will be temporarily store data in a file on the hard drive and it's virtual memory.

  Hard drives can be internal (inside the computer case) or external (outside the computer case).

  The system uses the RAM first, as it is faster to access, read and write, and for less immediate tasks of the system swaps out data for later use of RAM in the swap file on the hard drive.

  Not enough memory messages are normally because the system detects that there is a danger that it is shortly will have insufficient disk space to meet the needs of the system. It is perhaps because the allocated disk space is not enough to know that the allotted maximum play needs to be increased, or that there are not enough remaining free disk space to increase the size of the pagefile size. In your case, the messages are related to something else than the more common situation.

  In your case the problem is the Volume Shadow Copy service.
  http://en.Wikipedia.org/wiki/Shadow_Copy

  This service has disk space needs and the reserve system part of the disk only for its use. How it does and how to solve this problem, when things go wrong, is not commonly understood that is why I am fighting to give you simple instructions on how to solve your problem.

  A possible solution could be formatting your hard drive and a new installation of Windows and programs. It is a radical solution to what is an irritant, but probably not a problem that prevents you from using your computer. Reinstalling the operating system is not something I would recommend an inexperienced user company.

  What caused your problem? Most likely it was caused by your anti-virus program or a program like Registry Mechanic, or is the result of damage from malware (virus). You must uninstall Registry Mechanic by Add / Remove programs in the Control Panel now and we hope it's presence did not irreparable damage to the registry.

  What antivirus do you use? If it is Norton or McAfee that needs to go. Norton is particularly good to turn upside down the Windows operating system. If you have Norton you will need specific advice as the removal can be problematic. There are many appropriate freeware alternatives.

• functional content in yet cs6

  As part of my - so far unsuccessful - attempts to restore "functional content" (IE models / menus / buttons etc) still CS6, I visited "my Adobe account".

  AE, DW, PS is rated ok.

  BUT surprisingly, my first Pro status includes 6.0 cs3-4 and 5. -Still is listed as CS3.

  Now - the fact is that I have a full line of CS6 with valid records and the creativity of hassles (not in the cloud )

  I understand that these mistakes can happen but what could I do in order to established a customer status reflecting the reality?

  Back to even and missing library: every web-suggestions have been tested, and I'm about to give up. So: what alternative would you recommend for dvd & bd creation?

  Are you sure that reminder is not CS2? None yet not listed for me because I bought it comes with Premiere Pro. The last recall sold as a standalone was CS2.

  If you have PR CS6, you still CS6.

  You get functional content EN here:

  Reminder help | Download complete library of content/functional content

• FLASHBACK database alternatives

  We are poised to move to 11 GR 2, and so I thought I would ask the question just in case there was something again...

  Are there alternatives to FLASHBACK DATABASE to restore DDL? I was hoping that there is a new feature that I'm not aware, allowing for the same functionality at a lower level, at the level of the schema. I guess that we will not here yet based on the research I have done this morning, but I thought I'd ask.

  Thank you

  -= Chuck

  chuckers wrote:

  We are poised to move to 11 GR 2, and so I thought I would ask the question just in case there was something again...

  Are there alternatives to FLASHBACK DATABASE to restore DDL? I was hoping that there is a new feature that I'm not aware, allowing for the same functionality at a lower level, at the level of the schema. I guess that we will not here yet based on the research I have done this morning, but I thought I'd ask.

  Thank you

  -= Chuck

  The alternative to 'Flashback' is just 'recover' If you want to have an option "move forward." But for "replacement" Flashback Database, I'm not sure I remember something else than he.

  HTH

  Aman...

• Blue yeti, Skype, windows 7 and hearing 5.5

  I'm trying to help a friend record Skype calls using a Blue Yeti mic. Windows 7 and Adobe Audition 5.5. He wants to record the mic signal as audio from Skype at the same time. I tried selecting "stereo mix" as peripheral of entry, but hearing continues to display a sample rate error. I suspect a conflict between the blue microphone and sound card edge. I hope that someone here has a way to make this work!

  This can be a bit of a mine field these days, especially if Microsoft gets in the way - and he does. On the other hand, there is a list of alternative solutions to this - here's a list: How can I record my Skype calls?

• Yet 5.1 crashing after upgrade to the Mavericks

  Hi all

  Like many Mac users, I've recently updated to OS Mavericks. Since then, I had problems with still freeze everytime I try to import anything into it. I get constantly spinning wheel and finally have force quit, stop, restart. I'm currentlyrunning Creative Suite 5.5. I watched the upgrade to 6, but I don't really like the idea of a tax for every month forever, and it seems that there is no guarantee that this step would fix my problems. I'm not even certain that the Mavericks is the cause, but it's the only thing that has changed that I can think of 100%. Someone at - it suggestions?

  It happens too often.

  I honestly lost count times I heard stories from one OS to another (it could still be called OS - X, but in reality each revision is a different OS, using the same name to maintain the myth of the "superiority of the Apple"). So many people I know who run Logic Audio & PT on the same system are getting this problem. They change the operating system and then half of their software simply will not run any failure of plugins, or else load in one application, but not the other, causing large amounts of time either to support online or on the phone to support trying to get things working again, but they usually blame everyone but Apple & themselves.

  A change of operating system is an important thing and a very big deal indeed - before making such a drastic thing, it's really a good idea to do everything saure is compatible as well as ensure that all the drivers are also compatible too (cards sound cards, graphics etc.)

  Never will be supported on Mavericks simply because it is the end of life - Sonic Solutions (who has obtained a license of the AuthorCore again to Adobe) have been swallowed by Rovi (whose business model is based on streaming on demand) who killed Sonic Solutions, at the end of 2012, finally withdraw all support on December 31, 2013. This affecvted Scenarist SD, Scenarist BD 4 and BD5, Code Total, CineVision, all this--gone. The argument was that "optical media are dead", but my cynical mind told me they saw an opportunity to take their main competitor out of the game and went for it. Companies that had spent tens of thousands of pounds on seriously expensive high-end creation & encoding tools suddenly were on their own with no support. Nice gesture, Rovi.

  Another victim here was Adobe, who found themselves with no way to change the license to the authorcore then bye-bye yet. Adobe has made * No * stop supporting yet--people who bought Sonic Solutions he killed, and I don't see Adobe to start from scratch and build their own tool to make that development costs would be enormous.

  Alternatives?

  On a Mac, very few - if any. On the top of my head, I can think of Sony Creative Software for PC (Vegas Pro 12 will be written but not reproducible disc) and DVD-logic (not too sure what are the OS supported - PC, certainly, but not at all sure of Mac). If you need to get replicated discs then AACS is a must and you have the possibility of the DoStudio or Blu-Print (Rivergate software created an add-on for reminder allow the formatting correct the BDCMF, but it also will likely not run the latest Mac OS).

  In short, Sony are now the only player still active in the game and they do not work on Mac.

• [CS6] Export the page created by Alternative layout (InDesign CS6)

  How to export a page created by Alternative page layout in InDesign CS6? Or how can I get the name of the alternative page layout containing a page?

  I can usually export an InDesign page to JPEG using the exportFile of the document. Normally, it works in pageString value of application jpegExportPreferences on the name of the page that you wish to export.

  It works normally:

  // set export range to a custom range
  app.jpegExportPreferences.jpegExportRange = ExportRangeOrAllPages.exportRange;
  
  // set pageString to the name of the page I want to export, e.g. "3"
  app.jpegExportPreferences.pageString = page.name;
  
  // export page to jpg
  doc.exportFile(ExportFormat.jpg, filePath, false);
  

  The problem is, with pages created by the Alternative to the CS6 layout, there may be a lot of pages with the same name of '3 '. ExportFile method should now know the 'type' or the name of the layout of a page to export. Instead of using '3' as the pageString, I need to use something like "iPad h: 3. (See the image below). But I know not possible to get the name of a page layout. Can you please help?

  

  I have not yet CS6, but that's what you're looking for? http://jongware.mit.edu/idcs6js/pc_Section.html -

  alternateLayout	string	r/w	The alternative name of layout for a set of pages.
  alternateLayoutLength	number	ReadOnly	The number of pages in the section layout replacement.

  (It seems that alternate layouts are managed in-house by sections).

• Problems of severe breaking sex with yet

  Hello

  I am creating a project of double film layer and bought even more precisely because she had the ability to produce an image of the RFP for replication. The problem, however, is that it seems to be a serious problem with how still decides to break the layer - which, apparently, everybody knows outside Adobe! I read every message happening and the general consensus is that the manual layer break option or dialog box does not appear for most of the people (including me)-would come only upward when still unable to find a good place to put the layer break between videos. My experimentation, however, suggests that when auto value still simply splits the whole project exactly in half and place the breaking of the layer where it is - no matter if it's in the middle of a scene (as it happens for me). Without an option to set the layer manually break, however, I'm stuck. As well as my project, which is due out by Christmas. I've seen people talk about using ImgBurn and Gear Pro to set the outside layer break problem yet, but it's crazy since I just bought a product on the promise that he should do. Someone at - it no preview if Adobe are listening to this problem, or if there are no other alternatives that do not involve buying more third-party software? I am extremely frustrated by this - and especially the fact that it is spoken on the forums for a good while but nothing seems to happen to sort.

  See you soon,.
  
  

  Paul

  The solution is quite simple:

  Generate tab, do not select a DVD9 but rather a DVD5.

  Make a folder on your hard drive, not an image or a DVD disc.

  Ignore the announcement of the overflow of the disc. Then your project will be written to this file.

  Burn the necessary DVD9 with Toast app via the mode "burn the VIDEO_TS folder."

  Fact.

• Indicators display, VO, custom format method is it yet another way?

  Have you experienced the same thing and had a solution?
  
  Hello
  
  I use JDeveloper 10.1.3.4 and still looking for another way to customize the display of an attribute of a display object.
  
  I have two tables: BILL and PRICE, with a composite foreign key relationship (on the fields LDAP_UID and TERM), as illustrated below.
  

  The BILL table:
  
  NAME       LDAP_UID    TERM   CREDIT_HRS
  ---------- ----------- ------ ----------
  Tom Smith  tom.simth   200902       12.5
  Jane Lopez jane.lopez  200906        4.0
  
  
  The AWARD table:
  
  LDAP_UID    TERM  SOURCE     APPLIED
  ---------  ------ ---------- --------
  tom.smith  200902 Perkins     2000.00
  tom.smith  200906 Direct      1300.00
  jane.lopez 200906 CN           500.00 

  It is at the level of model data businesses, relationship master (Bill) /detail (Awards). Bill is dragged out of the range of data control to the page displayed as a form and scholarships is slipped into the page as a table. When tom.smith connects and chooses the TERM 200902, the master and detail are joined on tom.smith = tom.smith and 200902 = 200902, so the $2 000,00 Perkins Loan is recovered for him:
  

   Name Tom Smith 
   Term 200902
  
  Source    Applied   
  Perkins   $2,000.00

  It works fine but not easy to use: the values in the column of TERMS are a bit cryptic and should be posted in plain language, i.e., 200902 should be displayed as "Spring 2009" and 200906 as "Summer 2009". Advice from the display in the VO cannot handle this. The only other way I know wrote a method in the line of the VO class to do the translation. And here's the result:
  

   Name Tom Smith 
   Term Spring 2009
  
  Source        Applied   
  No rows yet   

  Of course, the "spring 2009" is used not only for display, but also to get to the paintings of master and detail. Of course "spring 2009"! = 200902, so no detail is retrieved for the user.
  
  Question is: is there still a way to customize the display, which does not affect the join of the master and detail tables?
  
  Thanks a lot for your help!
  
  Newman

  Have you thought of using a transient attribute for the attribute that displays your alternative values?

  CM.

• What restoration brings back old bags in the device? I was always told that icloud restoration brings all the bugs back, yet care apple lately told me than vice versa. I'm lost in a cleaner for restoration of backup: icloud or itune?

  What restoration brings back old bags in the device? I was always told that icloud restoration brings all the bugs back, yet care apple lately told me than vice versa. I'm lost in a cleaner for restoration of backup: icloud or itune?

  I've never heard a backup report bugs, however if you are interested in, you can always restore the device as good as new.