always print print test printer after each document page

Similar Questions

• 5150 how cancel info page that prints after each document?

  After each document to print on my deskwriter 5150, it prints a page of information that includes:

  File name, directory, model, title, subject, author and so on (about half a page).  I don't know what I did so that it starts to do that, and I can't stop.  I'm killing trees useless with this and pulling my hair and I want him to stop!  Any help will be appreciated gratefully.  Thank you.

  azgirlinfl

  Are you printing from Microsoft Word? Because the word (or MS Office 2007) has the ability to print the Document properties after that the document itself is printed. To disable it, click on the button of MS Office (or whatever we call it) to the left of the Office Ribbon and click Word Options. Now click on display, and under Print Options, uncheck "Print Document Properties". This should prevent this.

• K5400 prints the alignment page after each document

  I have a HP Officejet Pro K5400, which insists on an alignment page printing after each document.

  It's on Windows XP Pro SP3, if that makes a difference!

  I've tried everything I can think of to clarify this, but he persists.

  I know it's the printer, I moved and installed on another PC, and the error moves with the printer!

  Can someone tell me how to stop this, as HP don't seem to know!

  Message edited by JimW on 22/12/2008 08:26

  Excellent!

  Installation of new heads, (both for security), sorted!

• HP Envy 120 printer prints OK but the error message after each document

  After upgrading the firmware in my printer, I now get a window pop up with the title, "Unable to communicate with printer" at the end of each document.  The error message should be cleared before the next document in the queue will print.  Each document prints correctly despite the error message.

  Another thing that may cause this condition besides the update of the firmware is this: I have set up my printer for wireless printing, which worked OK.  However, I am currently using the printer with a wired USB connection.  Of course, the version non-reseau of the printer is selected as my printer 'default' regarding this error report.  The update of the firmware was held at the same time that change this "setup".

  Hey @rrbNevada,

  Welcome to the Forums of HP Support!
  
  I understand that your printer HP Envy 120 seems to have an error "Unable to communicate with the printer" after each print job is printed and this problem seems to have started after an update of the firmware running and change your connection type. Maybe it's a coincidence.

  For me to help you I need to know what operating system you print since?

  What is my OS?

  For now, I would like to run the print tool HP and doctor Scan. It is a practical tool that will 'fix print' questions automatically for you. It will scan the computer for any conflict of driver printer HP, connection problems and other issues that can cause problems with your printer. It will also try to fix these problems for you.

  HP Print and Scan Doctor

  If printing HP and doctor Scan fails to solve your problem, I recommend a complete uninstall and reinstall of your software and drivers for a clean slate to work with.

  Uninstalling the printer software

  After you have uninstalled the drivers and the printer software I need you to reinstall. To reinstall, I add two documents of reference below:

  Installation for USB under Mac OS X

  Installation of USB on Windows

  Because you use the printer for network and USB connections on your computer I suggest you first run installation from USB.

  Once the printer is installed for USB, then you can add in the wireless version.

  Adding a printer wireless on Windows:

  1. open the Printer Assistant software on your desktop. It should resemble a black printer icon and has your options of Scan inside.

  2. click on the 'utility' on the top tab

  3. click on 'software and configuration of the printer.

  4 enforce "connect a new device" for the network connection.

  This will add two copies of your printer and both will be implemented properly for scanning and printing.

  Adding a printer wireless on Mac:

  1. Click The HP utility icon in the Dock.

• HP LaserJet M2727 MFP Series PCL 6 - prints the blank page before and after each document in all cases

  HP LaserJet M2727 MFP Series PCL 6
  prints blank page before and after each document in all cases
  Does anyone else have this problem.

  It must be a preference setting, but I watched three times and CAP does not seem to determine what setting to change.

  See if they help you:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01477176&prodTypeId=18972&prodSeriesId=3377075

  http://h30499.www3.HP.com/T5/printers-LaserJet/LaserJet-M2727-NF-can-I-suppress-blank-pages-with-this-printer/TD-p/2359555

  http://superuser.com/questions/315522/computer-prints-blank-pages-before-and-after-content

• Reset the default printer after each print job.

  I wish that my printer to reassign the default printer after each print job.  I have a Hp LaserJet 1020 on my desk as my default.  Sometimes however, I print on our printer color etc.  Then when I go to print again immediately after the color printing - it is (and not my default).  I looked in the printer properties, devices, etc. - but do not see where I could update this?  Can you let me know.  Thank you.

  You don't say how you make that decision to change printers. I have two printers, all-in-one (default) HP4135 and HP6122 duplexer.

  Example: Leave in MS Office Word 2007 default print would always be. But I can choose a printer to use. With this selection, as long as I stay within this project, the HP6122 could be used. It would default to the HP4135 if I closed the project.

  If you go: start, Control Panel, printers, you will see all printers. The default value has a green check mark. Right-click on the printer icon and a menu descends with an extra function "Set as default printer".

• How can I get Word 2007 to reset the default printer after each draw?

  I'm not the most tech savvy person in the world, but I know my way around MS Office well enough; When my boss got a new computer last month, I helped to set up, install the MS Office, etc.  Now, she complains constantly that he does not restore the default printer after each draw and "my old computer used to do that for me - I never know where it'll print now."

  How can I configure sound MS Word to print from the default printer each time unless otherwise selected?

  I have the default printer specified in Windows, but each time she chooses an active printer, MS Word uses the current printer instead of the default printer.  I just need to know how to solve this problem?

  If you open a doc Office that it allows to print to the printer origonal used when saving this doc.

  If you use the Btn Office Orb, you can select the printer

• OfficeJet pro k8600: why my printer print after each letter printing

  Why my printer print after each print format appromitate letter of 30mm at the top of page new Board every time.

  N N N N N N N

  Hi @mohitarnold,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems with your HP Officejet Pro K8600. To better help you, please let me the following information:

  1. what program you print to depart from or arrive the fact in all programs, email, Notepad, etc. ?

  2. have you recently made any changes to the Windows 7 computer?

  3. How did you install the software and drivers for your K8600 JO?

  I would like as begin you printing HP and doctor Scan > www.hp.com/go/tools

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  What is the PSDR, please leave me with the requested information so that we can continue to troubleshoot.

  Thank you for being a part of the community of HP. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• After the creation of pdf in update of Microsoft Office 2011 14.6.2 in border printed on each overview pages but not Adobe Reader

  As I upgraded Microsoft Office 2011 updated 14.6.2, Word documents are converted to PDF in Word 2011 appear in the preview with a ¼ of an inch from the edge of the page border and the border is printed on each page. This happens not when the pdf file created in Word is opened in Adobe Reader. Is this a problem with preview (probably not?) or a problem with Word?

  I have the 14.6.2 Word and do not have this problem.

• CM1415fn: all-in-one printer HP CM1415fn clining after each numbered page process

  I have all-in-one printer CM1415fn. After each page same printer starts cleaning process, then the even pages printed again. For example, I print or copy 4 pages. First are the pages 1 and 2, and then the process begins, then clean again page 2, then pages 3 and 4, then againg cleaning process and once again the page 4.

  What is the solution of this problem?

  (we tried the firmware update, but it's the same result)

  The cause was in contact with the sensor of pollution with foreign body (a piece of packing material). After removing the periodic cleaning of the object has stopped.

• Printer HP Laserjet Pro M201dw: Drop-outs of HP M201dw print after the 1st page of the multiple-pg docs

  Installed M201dw HP laserjet on home network: router Asus Dark Knight (RT-N66U).  All PC running IE 11, Win 7/64 Prof.  Config page shows no IP addr for printer.

  Printer does not print more than 1 page of multi-page documents.  PCL XL Error message print at the top of page 2 and printer abandoned the remaining pages in the print job.  Printer display reads "Ready"; serial printer ' wireless on.»  No error message on PC.   No special printing parameters for employment; sided printing.

  Latest printer driver downloaded from HP; printer "USB001 Virtual printer for USB Port."

  Note: Took 3 hours to install this printer 'plug and play '.  Installation kept failing.  And, earlier this evening, when the printer was falling asleep, all computers thrown off network... None of this was happening until we added the printer to the network.

  Can anyone help with our printing problem?   If not, it goes back to the store before April 30 and I'm going to buy a used HP 1200.  (Thank you, in advance, for any help you provide.)

  All your suggestions had already been verified or updated before posting, but kept for lack of print documents from PC Word.  Called HP technical support never coming back as they promised, so I was wondering what was different between implemented for HP M201dw and previous HP printer laserjet that printed very well... and it was the printer port.

  Automatic installation, put in place a port USB001 wireless printer... the port should be Port TCP/IP Standard.  Once the port has been changed, all printed documents without fail.  (This will, we hope, also fix PCs disconnection from the WIFI when the printer goes to sleep). Printer port has been at the origin of the recent problems of printing with printer upgrades or changes to router and I should have changed it first, but I assumed that the Technical Support representatives two HP I knew on the phone knew better.

  Thanks for all your suggestions.  I appreciate the time you took to provide as much detail.  You can now add "try changing the printer port" to your suggestions!

• How to stop the reports printed after each fax?

  I want to stop having a printed report after every fax I send - passed or failed - on my new officejet 8600.  Any ideas?

  Thank you!

• HP Envy 5532: Printer stop printing after 2.5 pages

  The last three times I used the printer to print multiple copies of a page that the printer has printed the pages about 2.5 then stops printing.  The hologram always stops in the same paper.  I print wirelessly from a laptop HP.

  Hello
  Microsoft has released a patch that should answer this question.

  Install the hotfix below and check differences:
  http://support.Microsoft.com/kb/3000461/en-us

  Please let me know if that helps get the problem resolved.

  Concerning
  Shlomi

• 4500 ENVY: ENVY 4500 printer stop printing after a few pages.

  If I printed only 1 or 2 pages, it works fine for my printer. But if I print more, he may stop printing in the middle of the process and on my laptop says "Error on HP ENVY 4500 (network) printing" but nothing else.

  I tried to use the HP print and scan doctor software but it does not solve the problem and has not detected and errors

  Hey @saycheese,

  I understand that you get the "error printing" message when you print multiple pages of your computer Windows 8.1 documents to your HP ENVY 4500 e-all-in-one printer. I would like to help you today with this printing problem. Right now, it sounds like a conflict of WSD Port (network) takes place within your computer Windows 8.1. Therefore, at the beginning troubleshooting I'll have you run a patch to correct this problem. Please follow the steps below.

  Microsoft has released a hotfix to correct printing problems in Windows 8.1 operating system. Printing problems seem to affect printers on a network, regardless of the brand or model, and there is a conflict with the WSD Port network Windows 8.1. Please click here to download and run a Microsoft Fix it Tool. "Once the site opens for the fix, please click on the button 'available hotfix download". Please follow the prompts on the screen to install the hotfix. Once the fix has been loaded please try again to print a multi-page document.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• BatchModel - 10 loops and save the test report after each complete loop

  Hello everyone,

  We are using TestStand 2010 and currently using the BatchModel.seq for a quantity of 4 four DUT in a configuration of Burn-In.  Ten 10 times in a loop sequence of customer.  I wonder if there is a way to save the test at the end of each loop data report and create a new one for each of the loops after that.  Is this possible or I asking me too many software TestStand?  Thanks in advance for your responses to this last post.

  Kind regards

  Scott

  Hi Doug,.

  Thanks for the reply.

  I will discuss with my colleague who had a hand in the development of this customer file.  This customer file has been developed mainly by a contractor who works for our client.  These sound options as they will do the trick.  The customer file is used to Burn-In, so there are three levels of testing at three different temperature levels.  We strive to find some possible bugs in the code to that contractor that blocks the client file and all data is lost.  This will at least give us some options of data collection in a way that we should not worry if there is an error during the process and at least keep some data.  Thank you for your reply and if there is anything else, with that we have trouble, I'll post again.

  Kind regards

  Scott