Always the last one to know... SDK releases.

Similar Questions

• I never had the chance to restart firefox after an update was ready to be installed it crashed, now when I go about firefox to see if there is an update he says im at day, but under recent updates, he said the last one was on 6 September.

  Firefox crashed before I could reboot to update, how do the update to latest installed today? The last update was 6 under recent updates.

  The update has been disabled due to a problem with some Add - ons endangered when they were updated at the same time as the installation of the update of Firefox 7.0. An update of Firefox 7.0.1 'chemspill' is being developed on fix that issue, but it may take a few days to get it ready for release.

• How to get the notice preceding the last one

  How can I get the record that is before the last? I.e. last record - 1 or something?
  
  Any help on this?

  ROWNUM tell you nothing. It is a value that oracle assigns to a result set, it is not an attribute of a line.

  If you have a digital ID column that is the primary key (i.e. do not review links)

  SELECT *
    FROM (SELECT a.*, dense_rank() over (order by your_id_column desc) rnk
            FROM your_table)
   WHERE rnk = 2
  

  Justin

• Restart the PC under Windows XP, Firefox Sessions restore previous Session, not the last one I closed Firefox on.

  I formatted my PC and re-installed Firefox I saved application data about the configuration of firefox, after having reinstalled everything on pc and install firefox I can see my old tabs from last session, but when I say delete and or to make new tabs and option tools States still show my windows and last time labels , I then restart my pc and when firefox loads again the session is loaded from a former session before the format, I have create new sessions and the Firefox saves when I close and open them but whenever I restart my pc it still load pre format sessions. How can I make normal firefox once again without wiping my application data, passwords and settings and re - install the program? There must be a way.

  You can check for problems with the sessionstore.js and sessionstore.bak files in the profile folder of Firefox that store session data.

  Delete the sessionstore.js file possible sessionstore-# .js files with a number and sessionstore.bak in the Firefox profile folder.

  • Help > troubleshooting information > profile directory: opens showing the file
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Delete sessionstore.js will cause App Tabs and tab groups and opened and closed the tabs (back) to get lost, so you will need to create them again (take note or bookmarks).

  • http://KB.mozillazine.org/Multiple_profile_files_created
  • http://KB.mozillazine.org/Session_Restore
  • https://support.Mozilla.org/KB/session+restore

• ON the computer Vista Home Basic is not able to analyse the updates of the last one year and I already disable the software of MAcafee and stop and start the updates of windows, the cryptographic services, services of BITS. Still, I don't get the resoluti

  With the help of computer Vista Home Basic

  Hi Rupesh Goel,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C

• Updates cc PS - I missed the last one?  What should I do?

  I have PS cc and I have not installed the update of June... and there is now another update.  Can I go directly to the updated... or do I update on June first, then the current?

  Thanks for any help you can give me.

  Usually with Photoshop you don't have to install the previous updates. The update of June is indeed effectively Photoshop 2016 as it installs in a completely separate file. It's a good idea to use the Advanced installation option and choose to keep your existing computer version until you get used to CC2015.5.1

• can partition recovery deleted like a fool, I make a new one that will work like the last?

  I had an old backup of partition I made when I upgraded to 7 since vista it was the same size at the HP_Recovery partition factory. in some ways, I deleted the one badly. I have the iso of windows 7 on my computer, I can put on a partition named exactly the same as the last one with the same drive letter and have it accessible by pressing f11 at startup? Thanks for the help. im going to go ahead and try it but if anyone knows the correct way to do it would be great. Once again, thank you.

  You can start from your set of recovery disks and reinstall Vista, then make your upgrade again. Or install an operating system on it and it will be bootable.  Symantec Ghost can create an image on a partition and in... Acronis True Image that I think has the same option. Software Paragon above can create image and store on the partition, but to do a cd bootable, or usb flash drive in the boot of an acess partition.

  While all of this might be useful, seen reinstall them the files on the partition would be useless in the event of hard drive failure. I use Macrium Reflect, which is similar to Paragon (but not easy) to create images of a disk-based backup external hard usb. In the event of system failure or replacement of complete same hard drive can I boot from my practical boot cd and restore the image on all of my files added and programs including in about 30 minutes. Macrium, Paragon and Acronis can do everything, or even to burn the image to DVD.

• E270 freeze when refreshing, redefinition and install the last firmaware v2 and nothing

  Hello! I have a big problem, I just copied mp3 on my e270 player, as I have done all the time in months past, but this time everhing want badly... Updated database and reset... databases update and reset... like that, impossible to stop, just to be able to and the same thing happened when I restart, then I just read on the way to reset it with the lock and hold the recording and the power , goodddd, I saw a thread of the text, version 03 o something like that, then I saw for a Player V2 it should say 03, well, I download the firmware for the V2 and extract it on the drive of 16Meg that is appeared in my computer, and then disconnected it and the player says something like COPY ROM and nothing more happened then I turned off the player and tried to restart it, but it does not, restart it just doesn't turn on at all... He's dead? What can I do? is it possible to reset as a new? don't forget the music he have in it, I copy everything... hope you can help... Thank you very much!!! Steve

  Now I TAPED! with a lot of work, I founded the whole thing to do as a new... I just make a simple guide, I think it can be useful for many people, if they do not know LINUX.

  If the rom is corrupt or you did something wrong whith the flashing rom.

  you have to use LINUX, I use UBUNTU 8.10 Intrepid, if you are a windows user, you can download it.

  Here I give you a few options, the last one is to download the CD, but you can visit the Web site and select a download location.

  Site of Ubuntu:
  http://www.Ubuntu.com

  Direct download of this CD:
  http://less.Cogeco.NET/Ubuntu-releases/intrepid/Ubuntu-8.10-desktop-i386.ISO

  Burn it to a CD.

  Restart your computer with UBUNTU inside and boot from the CD.

  You can switch to another language and change the keyboard before you begin, use the first option to start, it will not install anything and nothing changes nothing in your system.

  you need to open some windows, don't close them until you finish the process, you will have to play from one to the other, just to see the bottom of the screen where are the windows list.

  go to APPLICATIONS/accessories/Terminal
  type in the terminal:
  sudo knew

  at this point, you will be the master of your system.

  Open a file browser of your system, where Firefox will put the files you downloaded.
  go to PLACE/DESKTOP

  Open the FIREFOX web browser
  go to APPLICATIONS/INTERNET/FIREFOX

  you need last rom:
  DOWNLOAD:
  http://mp3support.SanDisk.com/firmware/E200/e200v101.02.24A.zip

  go to the file browser, right-click, click on the downloaded zip file and select EXTRACT HERE.
  Extract in its own directory (we need to create a directory named: e200v101.02.24a)

  go to Firefox
  DOWNLOAD:
  http://Daniel.haxx.se/Sansa/e200tool/I2C-E280.bin

  Go to the file Explorer, select the bin file and put it in the same directory (e200v101.02.24a):

  in this directory (e200v101.02.24a), simply create a file with nothing in it,
  Click with the right button and select CREATE NEW FILE DOCUMENT/EMPTY and name:
  Sansa.fmt

  go to Firefox
  Download the e200tool and save it in the same directory (e200v101.02.24a).
  http://Daniel.haxx.se/Sansa/e200tool/e200tool

  Go to the file Explorer, select the e200tool file and put it in the same directory (e200v101.02.24a)

  in the end, you should have this directory (e200v101.02.24a):
  BL_SD_boardSupportSD.ROM
  e200tool
  I2C - e280.bin
  PP5022.MI4
  Sansa.fmt

  go to the TERMINAL (you must take care of the CASE, upper and lower are different under linux)
  NOTE: you can press on it were you (TAB key) to complete the file name or to see a list of files.
  type (depends on your language, can be desktop, desktop, etc.):
  CD Desktop
  ls-l

  You should see something like this and other files:
  drwxr-xr-x 2 steve steve 4096 2009-01-01 10:02 e200v101.02.24a

  If you have this directory, go inside, otherwise, stay there.

  to go inside, type:

  CD e200v101.02.24a

  now, to pass us...

  with the sansa
  put on hold (LOCK LOCK switch),
  Press and hold the (down arrow) button for 5 seconds pass in Factory mode
  Connect the sansa to the USB port of your computer, the wheel turns again now.
  leave the button
  Press and hold the rec button

  in the TERMINAL, type:
  sudo. / e200tool init
  sudo. / e200tool i2cprogram i2c - e280.bin

  Disconnect the Sansa
  Power the power button off, holding 20 seconds
  On mode factory
  connect to the computer usb

  in the TERMINAL, type:
  sudo. / e200tool recover BL_SD_boardSupportSD.rom

  Unplug and restart the Sansa player in manufacturing modeholding the REC button, connect it to the USB, you should now have the 16 MB drive in a new file browser. At this point, the player to show something like:
  Lun0 locked
  Lun0 unlocked
  and he repeats a lot of time...

  Open the first FILE BROWSER,
  Select the 3 files with the CTRL key and click with the mouse, go to the EDIT menu and select COPY.
  Http://mp3support.sandisk.com/firmware/e200/e200v101.02.24a.zip BL_SD_boardSupportSD.ROM
  PP5022.MI4
  Sansa.fmt

  go to the other EXPLORER of FILES with the open 16 MB disk.
  now simply copy the 3 files on the 16 MB drive:
  go to the EDIT menu and select PASTE

  Click the icon of the COMPUTER a high Center of the browser, and with the right button of the mouse, select the 16 MB drive, in the menu that appears, select REMOVE.

  Remove disk 16 MB of your computer, wait for the confirmation to take it apart and disconnect the Sansa.

  put the button of BLOCKING (LOCK) in the unlock position, turn off the SANSA pressed the button to power 20 seconds if necessary, turn it on and it will report formatting the SANSa as a new one, erasing everything in it and you will be able to use it as the first time.

  NOTE: I tried everything first without the sansa.fmt to save all files inside, but he ran like before with the problem, and then I had to format.

  Hope it may help someone in the future, thank you all for your help and all who have written something on how to restore the Sansa e200 series V1 (e270 in my case).

  Steve

• SkyDrive links added to all default email on the last document

  Attaching a series of 4 documents to an email in Hotmail via skydrive translates into hyperlinks for each document appearing as a list in the email as well as hyperlinks allowing you to ' go to ' 4 documents or download as a zip file.

  Using the two links this last fine, but all four of the hyperlinks in the list title will take you to the same document, which is always the last document added.

  It's weird and annoying.  Any body know why this happens and how to fix?

  Hello

  Check with the support of SkyDrive and Forums.

  SkyDrive
  http://explore.live.com/SkyDrive

  SkyDrive - Help Center
  http://explore.live.com/SkyDrive-Help-Center?T1=T1

  Windows Live SkyDrive (forums on the right side)
  http://windowslivehelp.com/product.aspx?ProductID=6

  Windows Live Solution Center
  http://windowslivehelp.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Using the two PB 2.0 + SDK &amp; BB10 Air SDK in Flash Builder 4.6

  Hello

  Any of you have experience creating applications using the PB2 + and BB10 Air SDK in Flash Builder? How do you change the build configuration between two SOFTWARE development kits? So let's say you make apps for Playbook and at the same time you are doing apps for BB10...

  Where do you set your IDE with these settings?

  Looking forward to your answers.
  

  There is essentially only one way to do it: you first install the 2.0 + SDK, then the BB10 Beta SDK. This is how you make sure that you have the data of these two software development kits installed on your pc. The Flash Builder plugin will be the BB10 sdk.

  I tested some of the components of the SDK BB10 on PlayBook OS 2.0.1. Needless to say that some features are not supported.
  Note: When I talk about libraries and 'ane's, I mean those provided by the SDK BB10. The following findings are valid with a pre-BB10 PlayBook OS 2.0.1 is the last one I think. PlayBook OS 2.1 can be considered BB10, although some features don't work there either.
  Here's what I found: you can use fuse controls, but the classes in the package "qnx.fuse.ui.dialog" do not work because the classes in the package "qnx.fuse.ui.window" do NOT work.
  You cannot use "QNXDevice.ane" because "NavControl" class which is indispensable to the actions of the bezel does not work and the notifications do not work either.
  If you use "fuse" components, you must also use 'QNXSkins.ane '.
  The "QNXLocale.ane" does not work. 'QNXNetwork.ane' no test however. The framework of the call does not work.

  Phew, that was some writing. If I missed something or you have any other questions, feel free to ask.

• I used download exec to install for FF &amp; save on USB key to reinstall after a complete system restore last one I have is FF12 can do with FF27 or even 26?

  I'm used to be able to download the exec of set-up for FF and save it on a USB key to reinstall offline after a complete restore of the system. This is very useful. The last one I have is FF12, so after a restore, I now install FF12 so I can take care of tasks offline restore without having to resort to IE. When I go online I go from FF12 to the latest version. Is there a way I can save the exec of set-up for FF27 or even 26?

  Hello, you can download the offline full installer for your system https://www.mozilla.org/firefox/all/

• Time machine wants to inherit the last backup I did on the same computer

  I made a backup for a while (6 months).  At the start of time machine, I get a box asking if I want to inherit the history of backups from another computer.  The problem is that the backup was not made on another computer... earlier versions have been but not the last one...

  Do I need to worry about this? Something is wrong with my computer or the last backup or should I go ahead and inherit the backup?

  I am running 10.8.5 a macbook pro retina early 2013 model and want to update os soon...

  Click the menu drop-down and select the correct computer.

• The last was held 2 times a auto update, I lost the Volume control icon

  The last one was held 2 times a auto update, I lost the volume icon on the toolbar control.  Only if I restore my computer to an earlier date, he returned.  I presume I need updates, but how can we retrieve icon so that I can cut and adjust the volume?

  When I got to the tab area of Notification, the volume and the box is grayed out, so impossible to check the

  99.99% of the time, you will find that box grayed out. It's almost a waste of time to go through this query.

  Use this tutorial and keep the reg file to desktop instead of remove it as advised by the tutorial.
  You will need this file reg again someday. It is preferable that it is handy as the fish for the tutorial again.

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Scroll down to three method.
  Use #2 - for the Volume icon

  To activate the Volume - icon Enable_Volume.reg< click="" to="">

  Do you to restart the computer to complete the procedures.

• Firefox Initialise OK with latest update crashes, bu then always in short time (very reliable). When are you going to get rid of the last update?

  Firefox last update allows you to initialize OK, but then in short time suddenly block it) whatever the operating mode, but immediately always when you use multiple windows). Obviously the last update has not been sufficiently tested. When will you update the update?

  Hello Thomas.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

• No approval of the last period of one month.

  Hello

  No approval of the last period of one month. Totally in confusion. Anyone know what the problem is.  We are totally confused. Help, please.

  You say that your applications are queued for a month now?
  These days, it's rather normal to have rather long waiting times until the apps are approved, it is mainly because of the Port-A-tuna (but I have suggested, that you browse through some other threads on this forum for more information).

  A month is now the peak time for approved applications, so it will only take more time to ensure that your applications will be approved/rejected.

  Sometimes you can speed up the process by BlackBerryDev Twitter, but it does not always help. There are also some BlackBerry people on this forum who can help, so contact them is an option to consider: samyotte

  I hope that your applications are approved soon :-)