Time machine wants to inherit the last backup I did on the same computer

Similar Questions

• Time Machine wants to finish the backup

  I recently had a repair on my MacBook Pro.  They replaced the Logic Board 2.5 GHz.  Time Machine now wants to do a full backup instead of only since my last backup.  Should I just let a backup completes or is there a way to backup only since the last of them?  Will allowing him to make a full backup take too much space on my external hard drive?  The drive is fairly new and I know that there is enough space (for now.)  Apple advice for troubleshooting time Machine said to call the repair center, but I thought someone here might be able to help.  Thank you.

  This is quite normal. Time Machine it's an another computer because the new logic board. So, you have to make a new backup. If you have no space on the backup drive, then erase the disc first.

• Time Machine restore, most of the alias icons are broken?

  I recently restored the system of Time Machine, but my alias (for most) have broken images.  If I copy the aliases, they are all fixed, but I can't do it exactly for each alias on the machine!  Restoration of the alias of Time Machine seems to have the same effect.

  Is it possible for the shot to solve this problem?

  I tried several solutions, compensation resolved cache:

  Deploy sudo rm - rf / *.

  sudo rm - rf ~/Library/Caches/*

  Reset

  If I had known what specific cache which is held the icon broken, images that would have been better.  It turns out that only some of the specific sizes were broken, which explains why the icons seem to appear and then disappear again on another page.

• Time Machine does not register the last backups

  In Time Machine preferences, it signals that the last backup is June 2, but when I go to Time Machine I don't see what

  which seems to be backups in recent days.  How do both to sync to declare the same data?

  

  • Assuming that your profile information is correct, OS X update to the latest version: How can I update to OS X and Mac apps - Apple Support.
  • If you do not already done, simply connect / again or restart your Mac.
  • If you back up the contents of the source that lies in the external devices, make sure they are all operational, mounted and available.
  • If the last time information and the date are still incorrect, continue with the steps below.
  1. Confirm that a backup is not already underway. Then, scroll down to 'Add or remove backup disk... '. "and select it. Choose 'Data' and then delete.
     • If everything works as it should, this will not affect your existing backup history. However, if you have done this until now it is not working as it should, and in an abundance of caution you should consider creating an additional, redundant backup first. If you work with the data that you just can't live without, that a backup is not enough in any case, even if everything works perfectly.
  2. Then select the drive again, connect you and choose 'Back Up Now' in the Time Machine menu bar icon.
     • If you have added previously any exclusion of the element (under the 'Options... button "), you will need to add.
  3. Time Machine will take a lot of time while it makes a 'deep event' scan to determine which files need to be backed up. Meanwhile "preparing backup...". ' appears in Time Machine preferences.
  4. When the "scan deep event" is over, Time Machine will perform a normal incremental backup, which will have the usual amount of time.

  That should correct the erroneous information.

• Time machine is unable to perform a backup. Not able to access the sparsebundle. Problem occurred first on snow leopard OS. Followed Dragon upgrade to El Capitan. Only difference has error code of 109 changed to null. What about someone?

  Time machine is unable to perform a backup. Not able to access the sparsebundle. First of all, there is problem with the Snow Leopard operating system. Dragon followed in the upgrade to El Capitan. Only difference was error code 109 changed to 'null '. What about someone?

  We need some info.

  You can access from the finder Time Capsule? If this isn't the case, then Time Machine will not work.

  You upgrade the computer snow to El Capo and keep the same name?

  If you want to backup, it is best to start again... clean the new backup any attempt to add a previous backup failed.

  I recommend that you actually erase the TC... do a complete factory reset and start again.

  The previous backup if necessary can be archived on a USB drive connected to the TC assuming that Airport utility can still access it. Airport utility accesses the TC?

  With update installs all sorts of things can go wrong... so tell me more if you can not get anywhere.

• Time Machine could not complete the backup-backup drive is not found

  I get a message...

  "Time machine could not complete the backup to Time Capsule

  I can't find the backup disk. Make sure that the backup disk is connected, or select a different backup disk. »

  I have not had this problem before, it's all connected...

  If you have not already made a comprehensive network feeding cycle, it would be a good basic troubleshooting step.

  To turn off some appliances, you actually pull the plug on the appliance.

  Turn off all devices on your network, computers, routers, modem, printers, mobile devices, etc... in any order you want

  Wait a minute

  Turn on the modem and let it run for 2-3 minutes by itself

  Switch on the device connected to a modem and let run for a minute

  Keep turn on devices one at a time about a minute apart, until the entire network is back

  Try a backup

  Report on the results

• Time machine could not complete the backup of... The backup disk image could not be found (error (null))

  Running OS 10.11.3 on my early 2011 Macbook Pro 2.7 GHz Intel Core i7 with 4 GB 1333 MHz DDR3, use Time Machine to back up to my Airport 802.11ac purchased 16/09/2014:

  Backup failed: Time Machine could not complete the backup of... Airport Time Capsule.   The backup disk image ' / Volume/Data/MacBookPro.sparsebundle ' could not be found (error (null)).   Last successful backup: yesterday at 12:17

  I can see the airport and the data file in my network.

  I immediately did a full time Machine backup on a USB key and it disconnected from my system.

  I unplugged the airport, let it rest for a minute and returned the power plug, let it settle for a green light.  I'm restarting Time Machine backup to the airport.

  I need to replace the airport?  The appliance starts to fail?  Or, it is more likely is a problem with winter static electricity that has damaged the image and reconstruction will fix all this.  Reconstruction will take about four hours with no guarantee that it will work.

  Please see #C17 in this document great support... http://pondini.org/TM/troubleshooting.html

• Time Machine could not complete the backup

  Since installing a Superdrive replacement, Time Machine is not back up.  I get an error message that says: 'Time Machine could not complete the backup "Time Machine backup disk. Full backup impossible. An error occurred during the creation of the backup folder. »

  I followed the instructions in the Time Machine error - backup failed, but none of the steps solved my problem.

  I suggest that visit you Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

• Can I partition my drive Time Machine to back up the other 2 drives?

  Is it possible to partition a hard drive and use it with Time Machine to back up the other 2 drives?

  Example: I want to save internal drive of my iMac and my external storage drive, and I wonder if I can partition a hard drive for use with Time Machine, in order to safeguard my internal drive on one partition and the external drive to another partition. Hope that makes sense.

  Yes, if it's not a time Capsule, but I wouldn't recommend it. I would use readers separated for each device you want to back up. If you put all one hard drive and this player goes down, then you have lost all your backups. With separate if backup fails a drive you will always have backups remaining intact.

• new time machine snapshots copied to the old directory of the machine not recognized

  I had a time Capsule 2 TB which showered, and I started a new backup (a USB key) by mode Apple drive. It took me a while to return to deal with the old clichés left on my Time Capsule. I found nothing specific online to tell me how to deal with this, so I made a few decisions naïve. I've disabled the Time Machine, renamed my new store backup and copied over the old store backup on the new backup drive time Capsule. Then in a Terminal on the command line, I mvhad snapshot directories in the newly copied backup of the old backup store store renamed folder. NOTE: On this site, I learned about a Time Machine of assistance called bypasscommand, and I needed to use it to move the Flash files in the command line:

  $ sudo mv 2016-09-17-211302 /System/Library/Extensions/TMSafetyNet.kext/Contents/Helpers/bypass.

  .. /.. /Backups.BackupDB/MyMachine /

  At this point, I thought: well, now, I have all my old and new pictures in the active backup store on the local USB drive. Then I turned on the Time Machine, and the first backup failed:

  "An error occurred during the file copying. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk. »

  Then I noticed that Finder shows only most original snapshots while in the Terminal, I see all snapshots using the ls command. All snapshots have the same names in fashion and the owner/group permissions. So, why don't Finder shows all snapshots and why is Time Machine unhappy?

  Given that I can't modify my own * post, here are the corrections and updates of the original:

  I had a time Capsule 2 TB which showered, and I started a new backup (a USB key) by mode Apple drive. It took me a while to return to deal with the old clichés left on my Time Capsule. I found nothing specific online to tell me how to deal with this, so I made a few decisions naïve. I've disabled the Time Machine, renamed my new store backup and copied over the old store backup on the new backup drive time Capsule. Then in a Terminal on the command line, I mvhad snapshot directories in the newly copied backup of the old backup store store renamed folder. NOTE: On this site, I learned about a Time Machine called command help work around, and I needed to use it to move the Flash files in the command line:

  $ sudo mv 2016-09-17-211302 /System/Library/Extensions/TMSafetyNet.kext/Contents/Helpers/bypass.

  .. /.. /Backups.BackupDB/MyMachine/

  At this point, I thought: well, now, I have all my old and new pictures in the active backup store on the local USB drive. Then I turned on the Time Machine, and the first backup failed:

  "An error occurred during the file copying. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk. »

  Then I noticed that Finder shows only most original snapshots while in the Terminal, I see all snapshots using the ls command. All snapshots have the same names in fashion and the owner/group permissions.

  Then, I thought that the Finder was confused somehow. I turned off Time machine and ejected from the USB drive. When I plugged back it it, of course now Finder shows all snapshots. The tmutil listbackups command confirms also all snapshots. I started a new backup, but it has not yet.

• iPhoto has lost all the additions from June 2015 to 21 Feb 1016. Tried to restore from Time Machine, it still has the gap.

  The date is February 24, 2016.

  I'm studying me ways to copy the library iPhoto in full on an external drive. I've been in the Finder > my username > photos, simply by looking at the dates, and I'm not aware that I made any changes.

  I was adding a handful of photos every day for the last week or two.

  I noticed that the file system is not quite as it was a week ago, and it seems that the last event is June 29, 2015, up to an import on February 22, 2016. In other words, it seems iPhoto has restored to its state of June 2015 then accepted imports from February 2016. I had not yet been in Time Machine!

  In the Finder > username > images, from now on, I see there: -.

  "Today."

  "iPhoto Library", type - package, with a white page icon folded, created may 2012, 30.8 GB, modified today, version 9.4.3.

  'iPhoto Library (original)', kind - iPhoto Library, with a colored icon, created may 2012, 27.46 GB, today, no modified version mentioned.

  «Past 7 days»

  "iPhoto Library (2 originals)" type - package, with a blank icon page folded, created may 2012, 30,77 GB, modified February 19, 2016 (its Feb 24 today), version 9.4.3

  In Time Machine, I restored version Feb 19, I find that the library was complete at this date, but the library has the same gap to date.

  I would be grateful for any suggestion. I didn't have it backed up to the cloud. Please have mercy, I'm not that tech-letter, so I would appreciate instructions step by step to the intermediate level.

  A big thank you Doug - greetings-

  You do not use the finder in any way with your iPHoto photos - when you launch iPhoto see you - especially in the last import, and last month "n"?

  LN

• Time Machine can't see the 2nd Logical Volume

  I have a RN104, there 4x3TB disks in there, configured in 2xRAID 1 volumes.

  The 2nd Volume has recently added so that I can activate and use Time Machine for backups of my Mac.

  That's the problem, when I start to set up Time Machine, it cannot see the remaining space in the 1st volume, I can't find a way to set up Time Machine to see or use the available space of the volume, I have installed specifically for Time Machine backups.

  All the thoughts/views/answers?

  Kind regards

  Glenn.

  Hello Thresherinc,

  The /data/home/USER/.timemachine is where Time Machine stores data, this folder is always the default value / 1 volume of the NAS and can never be moved.

  Kind regards

• Can you download Adobe After Effects on the same computer as many times as you want?

  Can you download Adobe After Effects on the same computer as many times as you want? I just think when I do a routine re-starting from time to time and have to reinstall all my programs.

  Also, I heard that you are limited to download After Effects on only 2 computers. This rule applies for all older versions of After Effects or it is just limited to CC and CS6?

  Thank you.

  > routine re-starting from time to time

  I restart my computer once a week and nothing will never missing

  Do you mean a REFORMAT of your drive?

  If you want to say reformat, just disable before starting, so your number of activations go down one, then allow installation and activation

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• I reinstalled the operating system on the same computer multiple times, however, this time it is said, I'm 'cannot be enabled.

  I have problems activating windows x 64 bits.

  I reinstalled the operating system on the same computer multiple times, however, this time it is said, I'm 'cannot be enabled. Recently, I updated my motherboard and changed to a quad core. I would appreciate help from the administrator. Legitimately, I bought my version of Vista x 64 tiger direct for years and relied on it as my OS for a while now. Any live medium or other assistance, advice, etc., would be appreciated. This operating system has been reinstalled several times, and the last time I had to reinstall it is because I closed windows because he wasn't updated correctly, and then restarting the operating system has not yet worked so I HAD to reinstall. Now windows says that my code is already used. I'm ready to take pictures, show my keycode and do anything to get my system online. Vista is saying I need to activate within 3 days. Also, I have problems installing Service Pack 1. Which maybe has something to do with my questions? Please, someone help me!

  Mark,

  In this case, you will need to contact Microsoft by phone for your landline number. Usually, most product keys have some time, they can be turned on before you reach this State.

  Best,