AMD Cool n Quiet

Similar Questions

• fans of zv5000z

  I have a hp zv5000z I can say that one of the fans is not working.  Is it possible to test the other fan to see if it works? Is there an article step by step on how to clean the fans?

  I've owned a zv5000z and I think she can still hold my personal record for the laptop that I owned the longest. about 3.5 years. I sold it to a family to give their teenage son and he wrecked it within 30 days. Another story. At the time that I bought the girl was considered a player. 64-bit AMD Athlon and a nVidia GeForce graphics card. I had Windows XP 64-bit on it and 2 gigs of RAM together.

  Here is the Manual:

  Manual

  Simply follow the instructions for disassembly down to the motherboard and the withdrawal of the processor. Look at point 7 on page 3-3. Fans are integrated in a sort of large insert module like a piece of cheese in a "sandwich". See Page 5-75. Keep in mind this manual covers several models, and sometimes it is a little confusing. Its a laptop big and there is a good amount of clearance in there, but also a lot of parts and subsets and lots of screws to follow. You certainly want to remove top the processor and the heat sink and apply new thermal paste sparingly. Just on the processor core. Clean the blades on the two fans with a q-tip and rubbing alcohol and let it dry. The dust that accumulates on the fans that makes them rotate more slowly and move less air.

  If both fans are working there is no substitute to keep the vents two fan up to your ear or just simply watching them to see if the blades begin to turn. If I remember the second fan does not hit unless you put the load on the processor. So do something like defragmentation of the hard disk or play a game and it should so this second fan on. I think that model also uses the old processor driver AMD Cool n Quiet and you want to ensure that is installed.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion 15 p002st: I need help on the speed of the processor (HELP)

  When the computer is idle when browsing the Internet seems same 2.9 GHz processor 2.6. But when I went to the game processor speed 2.1 GHz fixed. Please help I need to increase the speed of the processor. If can be found, why wouldn't you be?

  Let me put it this way I wrote may be cancelled...

  System idle 2.9 Ghz

  2.1 game set

  How to play 2.9 can I do?

  HP Pavilion 15 p002 st

  AMD 10 5745 M

  HD8610G & R7M260

  SLYMN

  I have an older AMD desktop computer and it runs something called AMD Cool and quiet - which causes the processor to slow down when is not necessary. I like it because it causes run cooler, thus extending its life.

  You should check to see if you have it on your PC.

  Disable it CAN allow your CPU to run faster on a regular basis - it's worth a try.

  Good luck

• Overclocking on Acer AM3450-UR30P

  I have an Acer AM3450-UR30P. Can I overclock my AMD FX-4100 with AMD overdrive to 4500 Mhz and everything is stable. My question is will be AMD cool n quiet Butterfly always my processor until a low Mhz when I do not use the full 4500 Mhz? I also brought up my 12 GB ram. I use my computer for the video and photo editing and also for copping movies on my hard drive.

  Hello

  Overclocking too often has negative effects such as the heat while introducing the waiting
  States that actually causes the computer to run more slowly.

  Check with Acer and AMD Support, as well as the Forums from AMD. And check with the sites
  who specialize in OC, but there will be a lot of very bad advice available.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/AC/en/us/content/support

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  Forums and support AMD
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  OverClocker.net
  http://www.overclock.NET/

  The beginner to overclocking Guide
  http://www.TechRadar.com/us/news/computing-components/processors/beginners-guide-to-overclocking-1040234

  Wolfram of Overclocking beginner's Guide
  http://www.TomsHardware.com/Forum/272214-29-Wolfram-Beginner-Guide-overclocking

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Is temp CPU to 131-140 iron an AMD Athlon II X 4 620 2.6 GHz Quad - Core Processor normal or high?

  I have just instlalled an AMD Athlon II X 4 620 2.6 GHz Quad - Core (ADX620WFK42GI) instead of my 2 215 dual core athlon processor and my temporary hoovers around iron 131-140. is this normal operating temp?   Cause now my CPU fan turns up every 5 minutes for about 5 min and it never ran full front

  As tetraethyle3 says, if you use the one provided with the dual core cpu, it can
  be insufficient. Dual-core coolers are similar, but not the same thing.
  However, you may have gotten the paste application heat badly too.
  There are tutorials of application of thermal paste on the i-net.

  Try a Coolermaster EVO Hyper 212.
  They are well regarded as a good value for the effective cooler money. You have to
  remove the motherboard to mount, unless you have a case with a hole in the motherboard tray to allow replacement of cooler.

  All three AMD I've used for the Athlon 64 came out slowed in the bass
  40 c in summer, but my Phenom 965 now stands at 35 ° C (temperature of 22 c air).
  In the summer with temperatures of air between 28-32 + C it will hit 60-65 ° C under full load.
  The stock AMD cooler also kept the 965 at similar times, but unlike my previous
  AMD coolers the fan was loud, so I installed a Noctua U9 with fan only.

  .

• Motherboard for Windows 8.1 updates 64-bit

  Hey guys! I encountered a problem, I have a desktop HP Pavilion HPE PC h9-1130 Phoenix but I guess I could say HAD one. I changed the GPU for a Nvidia GTX 760, put a H80 Corsair on the CPU to keep cooler and quieter while game, replaced the ram with 16 gb GSKILL 1600 mhz Ripjaws X and I changed the case for a larger case of Rosewill supplies HP one given 1 exhaust which to be honest is not that great when it is exhausting all the warmth of an AMD system based. BUT anyway, I've upgraded to Windows 8.1 a few weeks ago because he said that I could update. I had this problem, even when I got Windows 7 64 bit, where some games like Borderlands 2 or Dead Island: Riptide will be unplayable as he would go from 100 + fps for a unplayable 10-15 fps what constant stuttering, I tried everything BUT an update of the Bios for the motherboard. I can't find one for my motherboard for some reason any. Could someone help me to find one? I've looked everywhere, honestly, it's a last resort. N °

  Here you go... You will need to install this update on Windows 7;

  Description

  This package provides an update card BIOS mother M3970AM-HP for the supported desktop models and the operating systems supported.

• Compaq presario sr511onx

  I'm running an AMD athlon 64 X 2 2.5 GHZ cpu how to activate cool and calm on this machine its vista running.

  If you go into the power settings and see "Balanced" in the list of available power plans, then cool and quiet is enabled. Essentially, it is built into Vista and Vista automatically takes advantage of the technology when it is available.

  By default, HP has enabled in the BIOS and I don't think it can be turned on or turn off (all or most consumer desktop PC).

  For more information on this... see AMD FAQ

• "The speed of the CPU 0 in group 0 is restricted by the system firmware."

  Hello!

  My computer has recently been very slow. I tried to format and reinstall, but it did not help. When I checked the system event log, I saw this warning message repeatedly:

  Microsoft-Windows-Kernel-Processor-Power
  37
  Warning!
  The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for X seconds since the last report.
  

  My CPU time are OK, and I've updated the drivers and BIOS. All power saving settings are set for maximum performance. Does anyone know what causes this problem and how it is fixed?

  Model: Pavilion DV7 6010so

  CPU: AMD Turion Dual-Core processor P560

  OS: Windows 7 Home Premium

  EDIT: According to the performance test PassMark, my CPU performance is one-third of the exception. There is definitely something wrong.

  I do not have the main function of parking in any case, it's Intel only, I guess.

  With the help of AMD Overdrive didn't completely solve the problem, as something of force multiplier to 4 a few minutes after changing. I thought it had to be a kind of BIOS-side power save "feature", but the official BIOS of HP sucks and it is not all the options related to it. I installed the modded BIOS (it's risky, I know), disabled AMD Cool ' silent mode and now sticks to 12.5 x multiplier.

  Pretty weird, huh? Cool ' Quiet is supposed to increase multiplier when necessary and lower it when the computer is idle, but for some reason it has stopped working properly a few months ago and stuck the multiplier to 4 x.

• Windows 7 and Bose Companion 5 speaker system lose sound intermittently.

  I use Windows 7 Ultimate RC, bought the version complete, simply have not yet installed.  I also use speakers Bose Companion 5.  Card mother Asus M3A79-T Deluxe and an AMD Phenom II processor.  My problem is this, my speakers work for a period of time, usually less than a day, then all of a sudden they'll stop working, is in the middle of playing World of Warcraft, viewing a video, whatever, all of a sudden they just stop working.  The speakers are still reported by default in the sound settings and remain are worth in the hardware Manager, I can unplug the USB and plug it back and he presents himself as the work, etc. but no sound until I restart the computer.  I do not use a hub and have tried different ports, please help.  I read around other people have problems with the function of ' cool n quiet AMD acting, but mine is disabled by default in the bios and I also ran the AMD power monitor, the two have no effect, I always lose her completely and randomly.

  None of this works... the problem still exists.  I thought I had resolved in the power settings... If you go to advanced there is a place to turn off USB, select suspend settings, it worked for 3 days this time before deciding to just turns off again.  Anything that you can do to watch it all would be appreciated.

  You encounter a driver problem, and the only real solution is a driver of his best. You should keep control of driver updates, if you want to use the devuice in Windows 7.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Qosmio X 300 - 14V - accidents while playing games

  Hello! I have some problems with my Toshiba Qosmio X 300 to 14V. While I play games installed on the computer "crushes". The screen goes black and the speakers start droning.
  I noticed that if I reinstall windows, driverers and directX it won't happen for a while. I should also mention that this does not happen with ALL games. He especially happenst to games that require more performance of the computer. games like Just Cause 2, Neef For Speed Hot Pursuit, Fallout New Vegas. In one case, he joined a pretty old game, shadows on the surviving ground.

  If anyone can find all reasonable explanation please help me. Thanks in advance.

  P.S. There are about 4-5 months my HARD drive crashed, so I bought a new one and installed win 7. At that time, I was working with win Vista Edition home premium x 32 with drivers that were included in the recovery package. Before the new HARD drive, I had no problem with the computer. Apart from some overwhelming sometimes because of ovearheating because the ventilation channels were filled with dust.

  Post edited by: donrumata_1

  Hi donrumata_1,

  Maybe the laptop goes down cause overheating? Have you ever tried to clean up your laptop with a jet of compressed air?

  This can blow the dust from the cooling fans and only takes a few minutes. In addition it s not necessary to disassemble the laptop so it s very easy and not complicated.
  => [How to clean a Toshiba laptop cooling system | http://aps2.toshiba-tro.de/kb0/HTD7A01ZZ000AR01.htm]

  From my own experience I can say s very useful and I do every 3 months. If the laptop is much cooler and quieter because the fan doesn't run so often more.

• The CPU temprature is high

  Hello

  I need a software tool to monitor my CPU temprature.
  My laptop chrashes if I start the applications and I think that the CPU temprature is high.

  Tanks for help,
  by F_E_O_S

  Hi Enrico,.

  You don't say what model of laptop you have, but I strongly recommend to remove any accumulation of dust etc. the heatsink from the CPU and cooling fans.

  Also to ensure that there is sufficient air circulation around the laptop for good cool the CPU. If the fans are running high-speed quite frequently this will normally indicate insufficient air flow in the radiator.

  The Toshiba power management utility has a setting to set the cooling fans to give you two maximum performance of CPU (i.e. maximum of cooling) or quieter operation (Minimum cooling), I'll make sure that it is set to your needs (available in Control Panel).

  HTH

• Satellite A100-158: fan is always on with BIOS 5.9

  Hello.

  I have an a100-158 and use Windows XP and I installed the BIOS 5.9. I noticed bios versions 5.x are for those who use Vista so the cooler still works because of the Aero interface.

  When I got the BIOS 1.3 the cooler was quiet but now with 5.9 the cooler makes a lot of noise and that is not very comfortable for study to the laptoc near us...

  No chance to solve this problem?

  The A100-158 belongs to the PSAA9E series and it was delivered with the XP and with Phoenix BIOS am I good?

  Well well, a question; Why update you the BIOS if the laptop works properly. You know that BIOS update is always risky and should be only last resort to solve any problems.

  However, I recommend to reinstall the Toshiba power saver and change the settings in the menu of basic-> cooling methods

  Maybe it helps.

  If note, you will need to set the BIOS to the original version. But in this case, the ASP must be contacted ;(

  Good luck

• HP 15 r078tu: overheating problem Hp 15 r078tu

  Hello, I recently brought a computer 15 store.today official hp r078tu hp laptop I play some videos on youtube and notice the temprature of the laptop is too high, I measured using cpuid hwmonitor software is 62 c. also, I can't hear the fan noise and no air flow comes from events. This laptop have fan or not I'm asking this because intel build new processors that do not require a fan.

  product link: http://support.hp.com/in-en/product/HP-15-Notebook-PC-series/6875200/model/7472446/

  Please answer as soon as possible

  Hello
  
  Data sheet:
  http://support.HP.com/in-en/product/HP-15-notebook-PC-series/6875200/model/7472446/document/c04435648/
  
  Your laptop's cooling fan/heatsink - Page 63, 64 in the manual.
  
  Manual: http://h10032.www1.hp.com/ctg/Manual/c04512950
  
  It has processor Intel Pentium N3530 with Intel integrated graphics is not suitable for even moderate-to-heavy games.
  
  The temperature is quite correct.
  You try some of the tips in this document useful to reduce overheating:
  http://support.HP.com/in-en/product/HP-15-r078tu-notebook-PC/6875200/model/7472446/document/c01657439
  
  Fanless CPU's processor Core M, which fortunately is currently built in the HP Envy x 2 15 notebook/tablet PC t, who lent me to HP. It's pretty cool and quiet.
  
  Concerning
  
  Visruth

• I can add a laptop as media extender Center

  I have my desktop PC my computer that I watch and record tv on main library, I can add a laptop as an Extender, so I can view records tv?

  How can I get a license key if I can?

  Hello

  Welcome to the community of Windows Vista answers.

  I'm afraid that you can't add your laptop as an Extender. Extender technology is integrated with some of your favorite such as televisions, DVD players, home entertainment devices and cool and quiet devices that fit comfortably with your other components home cinema. We call these "Extender for Windows Media Center" devices.

  Here are some of the links through which you can get a clear picture on the Extenders can be used with media center.

  Extender for Windows Media Center.
  http://www.Microsoft.com/Windows/products/winfamily/mediacenter/features/Extender.mspx

  Set up a Windows Media Center Extender device.
  http://windowshelp.Microsoft.com/Windows/en-us/help/8076aff3-16ec-4751-9F57-d36e0ff407201033.mspx

  Use a Windows Media Center Extender device.
  http://windowshelp.Microsoft.com/Windows/en-us/help/c48f1279-4F0F-472b-8f54-a275109bd8341033.mspx

  Windows Media Center Extender FAQ.
  http://www.Microsoft.com/Windows/products/winfamily/mediacenter/extenderfaq.mspx

  Concerning
  Anthony.

• Windows 7 64-bit mouse pauses/freezes/stutters often accompanied by an event sound Windows

  Symptoms:

  Erratic mouse behavior. Mouse hanging, the gel for a full second or more, accompanied by a Windows event sound, generally. Sometimes, there is just a slight pause and no noise Windows event. Sometimes the mouse acceleration changes after freezing. Sometimes, more rarely, my mouse will be dropped by the operating system... the laser light on the underside turns off and I have to unplug the mouse and plug it in again so he can be recognized.

  What happens almost all the time. I want to use Windows mainly to play a game, World War II online: Battleground Europe. It is a shooting mmo first-person. This problem is annoying enough on the desktop. Unsuable for FPS games. I plan to have to file using Windows 7 64 bit for now.

  I have this problem as soon as Windows 7 64-bit.

  The problem with Windows 7 64 bit after trying many many solutions/solutions offered on the Internet.

  I did not need to determine what event could be linked to it in the event Log Viewer, or if it is even an event that is be connected here.

  NOTE: My mouse (G3) Logitech MX518 Gaming tips works fine, without any problems whatsoever, under Windows XP Professional SP3 32-bit with all latest updates or on Ubuntu 10.4 (Lucid Lynx) 64-bit. I never had no problem with this mouse at any time under these operating systems. These operating systems will run an intensive game if I want to, throughout the day.

  -----------------------------------------------------------------

  Steps in my last attempt to solve the problem.

  I was looking not all parameters of the BIOS at once at the beginning. For example, I have disabled "Intel Speedstep" to see if that would solve the question. Then restarted in BIOS and disabled the C1E function when I discovered that disabling Speedstep alone does not resolve the issue. ECT, ect...

  I have not installed Norton Internet Security 2010 for awhile while I tried various solutions of Workaround available and listed below in case this is the question. No difference, so NIS 2010 is now installed.

  Remember, that this behavior occurs that when Windows 7 64 bit is installed properly.

  (1) clean install of Windows 7 64-bit, for the third time now

  (2) installed the Runtime Visual C++ 2008 64 bit v9.0.30729.4148 than kb973552/KB969706 downloaded from--> http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=2051a0c1-c9b5-4b0a-a8f5-770a549fd78c

  (a) just in case Rebooted and then install the same version of the Visual C++ 2008 for 32-bit environment Runtime in Windows 7 64 bit

  (3) installed Windows 7 64 - bit drivers

  (a) Marvell Yukon 88E8056 Gigabit Ethernet on-board NIC Driver v11.24.5.3 (15/02/2010)

  (b) various software of Creative Labs creative Labs X - Fi Titanium 64-bit driver v2.17.0007 and all updates for them.

  (c) Software Driver of Intel Chipset v9.1.1.1025 (22/12/2009). Seems to just install an update from the hard disk of 64-bit driver.

  (d) ATI Catalyst 10.3 Driver

  (4) installed Windows updates

  NOTE: I have not installed the latest four updates for now, three of them are security updates have a publication Date: 09/02/2010. I decided to not install these due to a mistake of "Circular kernel context logger" that I already saw in the viewer of the event log, recorded by "Microsoft-Windows-Kernel-EventTracing" event ID: 2 now, I'm not having this issue.

  NOTE: I also installed a driver in option, the ACPI ATK110 driver, which installs the following file--> C:\Windows\System32\drivers\ASACPI.sys - he has listed as the version of the file 1043.2.15.37 and dated 29/03/2005. In a previous installation of Windows 7 64 bit, I downloaded an update of the present of Asus contained in a file/AMDCoolnQuiet_Utility_V21801_XPVistaWin7.zip utility and installed. I started the utility and he gave me the message that my system was not supported by "Asus Cool ' n Quiet. It's ASACPI.sys file was dated some time in 2009, rather than in 2005. Since my last Windows 7 install, I have currently a bit the 2005 version proposed by Windows Update installed. I don't know if this file is to load or used by Windows 7 64 bit. But I wonder...

  Is this a problem?

  (5) installed software v6.00.68 Logitech Setpoint (Version 4.90.80 driver) for Windows 7 64-bit

  NOTE: I have not installed this in previous installations of 64-bit Windows 7 and had hoped that this would cure the problem. No change, the problem still persists.

  (6) went into the BIOS and reset to the default settings

  (7) BIOS: Set A.I. OC (overlcock) to "Manual" and left to deafult values so that the CPU isn't overclocked automatically or manually sort

  (8) BIOS: Establish timimgs settings memory, memory voltage and the voltage Northbridge, according to my memory (memory Mushkin) manufacturer's recommendations

  NOTE: Again, I didn't have never had any problem at all in Windows XP Pro 32 bit SP3 or Ubuntu 10.4 64 bit with these settings. These operating systems will run an intensive game if I want to, throughout the day.

  (9) BIOS: The value of Intel Speedstep "Disabled".

  (10) BIOS: C1E (Enhanced Halt State) value to "disabled".

  (11) BIOS: Set the Mode of the ACPI Power / Suspend 'S3' only '

  (12) BIOS: Set ACPI 2.0 Support to 'Active '.

  NOTE: On, off, on any settings/functions above not has not solved the problem. I have I have not tried all the single 'combination', but in any case, make no change with the mouse.

  (13) in Windows 7, I selected the Option to 'High Performance' and the value "USB selective suspend setting" to "Disabled" with updated BIOS options as shown in steps 9 to 12 above

  NOTE: With BIOS defined that way there is no setting "Processor Power Management" in the Options of food, other than the 'political cooling system' (active/passive).

  I left this game to 'Active '.

  Is this a problem?

  (14) tried monitoring DPC latency with the download link for the "DPC latency Checker" utility No visible ears in the utility during the mouse freezes / breaks

  -----------------------------------------------------------------

  System Specs:

  (1) Intel Core2Duo E8600 (3.33 GHz, 6 MB L2, Stepping E0, CPU Cache not OC had) on Asus P5Q Deluxe (Intel P45 Chipset + ICH10R Southbridge) with BIOS 2301
  (2) Zlaman CNPS9700 LED 110 mm thermal heatsink / CPU fan
  (3) Thermaltake W0116RU 750W modular POWER supply
  (4) Mushkin 4 GB (2 x 2 GB) DDR2 1066 (PC2-8500) RAM in Dual-Channel mode (value 5-5-15-2T timings and various other such defined memory recommended by Thierry timings.) Voltage of the memory the value 2.02v and Northbridge as recommended by Mushkin value 1.32v in the BIOS. I have never had any problem in Windows XP 32 - bit or Ubuntu 10.4 64-bit)
  (5) driver software Intel Chipset v9.1.1.1025 (22/12/2009)
  6) HIS (ATI) HD 512 MB 4850 with IceQ4 cooler with Catalyst 10.3 driver
  (7) creative SB X - Fi Titanium with driver v2.17.0007
  (8) Marvell Yukon 88E8056 Gigabit Ethernet NIC onboard with driver v11.24.5.3 (15/02/2010)
  (9) Unicomp Tactile Feedback(non-mushy, clickity-clack) USB wired keyboard
  (10) Logitech (G3) Gaming MX518 Wired Optical mouse with the Logitech Setpoint software (Version 4.90.80 driver) v6.00.68 for Windows 7 64-bit
  11) MultiSync Samsung 214 t 21 "screen LCD Digital (1600 x 1200 native res)
  (12) Microsoft Sidewinder Forcefeedback 2 USB Joystick
  (13) western Digital 500 GB GB w/16 MB Cache SRTL disk HARD 7200 RPM Sata 3.0 GB / s
  (14) v9.28.1886 DirectX Redistributable (February 2010)
  (15) cooler Master Cosmos 1000 Full-Tower Case
  (16) Norton Internet Security 2010 (firewall and anti-virus)
  (17) Internet Connection Comcast 1.5 MB/s cable
  (18) Windows 7 64 bit ultimate
  19) Ubuntu 10.4 (Lucid Lynx) 64-bit

  Hello again,

  Can I have found the solution that worked for me. It is probably too early to tell, I'll need more time to be sure. But in case he solved the problem for me, I'll post what seems to have worked as suggested on a post, I came across from another forum. Consider a guy who tried many suggestions, maybe that's the answer. Heck, I had tried a few other things that I have said in my original post. But in any case, so far, my system and mouse seem to work very well on the desktop for the last hour and a half. I have not tried yet game.

  (1) uninstall the Windows Update KB977074 (January 2010 stability and reliability update for Windows 7 and Windows Server 2008 R2).

  (2) reboot and leave your system for a couple / few minutes after the restart.

  (3) just in case... Restart again, and then reinstall the KB977074.

  (4) restart to complete the installation.

  January 2010 stability and reliability update for Windows 7 and Windows Server 2008 R2 info and the download link-->

  http://support.Microsoft.com/kb/977074

  Best regards and good luck,

  OneTinSoldier