An alert is triggered when the command line is closed

Similar Questions

• Triggers in the command line

  Hello

  I am new to triggers, so I don't know if I'm doing something wrong or if I'm having a 'silent' time

  With the code below, I wrote a trigger I want to apply to a table. Problem is, when I write in my command line and end the command with 'END;' and press 'enter', the grave to a new line command line and does not run my code... and I can't find a way out without closing my command prompt.

  What I am doing wrong?

  I'm using Oracle 11 g Express. Does anyone have any suggestions? Thank you!

  CREATE OR REPLACE TRIGGER EMPLOYEE_AGE_CHECK

  BEFORE INSERTING

  WE EMPLOYEE

  FOR EACH LINE

  BEGIN

  IF ADD_MONTHS(DOB,216) > trunc (sysdate)

  THEN

  RAISE_APPLICATION_ERROR (-20950, "Employee is under 18 years old!");

  END IF;

  END;

  EXAMPLE TABLE:

  CREATE TABLE EMPLOYEE

  (EmpNo NUMBER (6) PRIMARY KEY,)

  DATE OF BIRTH DATE);

  Hello

  I assume you mean SQL * PLUS, when you talk about command line?

  SQL * PLUS expected a / as run command

  See also difference between ';' and ' / ' in the SQL scripts

  Concerning

  Marcus

• Database alert is not triggered when the Oracle database monitor by mistake.

  Hello

  Database alert is not triggered when the monitor of the Oracle database by mistake. If we test the alert manually alert works correctly. Could someone let me know the solution for this.

  This isn't a question of PC or operating system. You should post your questions in the forums of Oracle database.

• When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."

  Elevation required to route add command

  When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."  What is the correct syntax to use?

  You can watch using the PowerShell...

  http://TechNet.Microsoft.com/en-us/library/bb978526.aspx

  http://TechNet.Microsoft.com/en-us/scriptcenter/dd742419.aspx

  .. .and post questions about Windows PowerShell forum...

  http://social.technet.Microsoft.com/forums/en/winserverpowershell/threads

• How to pass variables by using the command line when starting from a native application ActionScript

  How to pass in variables or arguments to start using the command line when starting a native ActionScript application? For example, I have my app MySweetWidget call and it was compiled with Adobe AIR runtime in captivity so now I have MySweetWidget.exe.

  In the command line, I call MySweetWidget.exe and would like to pass in variables or properties of the application. I guess that these variables are read from the loaderInfo.parameters object.

  Please let me know if the Adobe AIR runtime supports passing the parameters to native execution. If so, I would like to help determine the correct format of how pass variables. So would you want to read those loaderinfo.parameters object?

  Thank you

  Jeff

  I found the answer to my own question:

  Yes, it's a feature supported. It is documented on the following page:

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/desktop/NativeApp lication.html #event:invoke

  When you subscribe to the event from the NativeApplication invoke it will subsequently send the event and you read the table of e.arguments object to get the start in the native application arguments.

• Add text from the command line to the output so that I can know how a command has been run when it generated the output

  This is a question and a suggestion...

  I would like to be able to precede or add if it works, the command line in the output file that creates the order.

  Example:

  I run dcdiag with switches, etc. and create an output file of results that gets saved or sent to a person or just put it in a folder. Of course, it could be that someone else ran the command and then sent the file. Anyway the problem is the same - what was the exact command line that has been executed to achieve these results?

  Question:

  Is there a known way to do from the command line that I can apply to any command?

  Suggestion:

  If this isn't the case, then I would suggest MS to include this function in all the BACK and PowerShell commands able to produce text output.

  If all goes well they monitor this forum and find it's a great idea and send me a check (pinky in my cheek) a meeellion of dollars. Then I and I alone will rule the world.

  Here you go:

  d:\>format i: / FS: NTFS > format.txt
  d:\>echo i format: / FS: NTFS > format.txt

• AfterFX.exe always returns 1 on the command line

  I'm trying to script AfterFX.exe to stuff of a command line process, apparently like many people who use this interface.

  
  I found that AfterFX.exe (CC version at least) always returns 1 at the command prompt if the shell wait so he could get out. I would like to use error codes to indicate success or failure, but apparently, despite documentation (after effects Scripting Guide) telling me to value exitCode however, I wish... 1 is the return value. Even if exitCode is zero.

  Directly immediately AfterFX.exe running from the Shell returns so the return code is not useful. If you start with start/wait (indefinite display i.e. start/wait "dummy" "C:\Program Files\Adobe\Adobe after effects CC\Support Files\AfterFX.exe" r - c:\path\to\my.jsx - noui) then the shell does not come until the application is made. You get this same behavior without the start/wait stuff if AFx is managed via the batch file (which is how I use it). Therefore, the return code is unnecessary.

  
  Does this happen for others, it is in its State (i.e., run that after Effects is just a mistake, lol), or...?

  In addition,

  > start "dummy" / / wait "C:\Program Files\Adobe\Adobe after effects CC\Support Files\AfterFX.exe" s '' alert ("Hello")'; app.exitCode = 88' - display undefined noui

  > echo %errorlevel%

  1

  The existence of display undefined-noui doesn't seem to affect the return code. The ILO "dummy" on the command line is a requirement of departure when launching applications with arguments (it's a bit esoteric, but it must be there).

  Yes, I found that you must use AfterFX.com instead of AfterFX.exe. I also remember that it is documented in the documentation of the extension Script somewhere; not really yelled that the examples all use AfterFX.com.

• Run the command line script AfterFX

  Hi all

  I'm trying to run a script from the command line AfterFX.exe and I get the message: "unable to run the script at line 1. Syntax error.

  If I run the same Script AE editor script file, it works perfectly

  Here is the command line that I use:

  "C:\Program Files\Adobe\Adobe after effects CS6\Support Files\AfterFX.exe" indefinite display - noui s 'D:\Product\Watermark\Rendering\WatermarkedSecuritySample.jsx '.

  Someone has an idea of what may cause this error? I tried to run the script directly from the command line like

  "C:\Program Files\Adobe\Adobe after effects CS6\Support Files\AfterFX.exe" indefinite display - noui s 'alert('1') '.

  and it works very well for small script but mine is way big to do

  As you can probably guess with the 'watermark' and 'Security' in the name of the file, I can't post here, the script file, all I can say is that line 1 is:

  {

  projectName = "D:\\Product\\WatermarkTemplate.aep"; var

  I tried to replace the entire script 'alert('1')'; and it causes the same error when running it from the command line

  Also, if anyone knows where I can find the command line arguments AfterFX.exe description, I'd be very happy... everybody talks about aerender.exe, but I need these options to AfterFX.exe

  Thanks for your help

  Have you tried using "-r" instead of "-s"?

  ("-s" argument is a script; and to "-r" argument is a path to the script)

• Access iCloud drive via the command line

  I wanted to write a small script to access iCloud by car via the command line, and to my surprise, this seems to be a very special place that is not displayed in /Volumes or even in my home directory is Dropbox.

  Veterinarians here know the way, if not to enlightenment, then to iCloud drive?

  Thanks in advance.

  It is actually a rather interesting problem. I did research I should have done before I came here and found that iCloud Drive is accessible here:

  ~/Library/Mobile\ Documents

  What is interesting is that the many, many interesting things found in this directory when you reveal all the files through ls - al, is that custom directories seem to appear. Even more interesting, in the Finder, select go > go to folder... and that type path and it does not recognize the path. Type ~/Library/, and then of course that's fine and see you the directory of Documents Mobile...

• Start an application saved on the command line

  Hello

  first of all that I do not know how I can start my data .exe on the command line, I know that. I need a few more tips.

  My problem is that I start my program and set values in my interface and then I save my interface. You can say that I am creating some options with different parameters (option 1, option 2, option3). Now, I would like to open this option on the command line. So first of all the program begins with option1 when this option is over that option 2 should start (I will also create a handler of signals which gives me a feedback if the option before closing).

  It should be like this:
  Path\Application.exe option1 option2 option3

  But know that I have a problem. When I save my slab (SavePanelState) I can not open such a Panel is saved with the command "LoadPanel". In help, there is also information that you can load only such a panel with the RecallPanelState command, but with this command you only update the interface. Now my question is, how can I savel a panel with its States and call it with the command LoadPanel? Or is the only way to load a group of experts and to recall the values the command of RecallPanelState?

  Best regards

  Unortunately there is no way to directly open a control panel preconfigured with controls other than in their default state. You have already discovered it and I can confirm that this can not be changed. However, if you call LoadPanel and RecallPanelState front showing the Panel, that the user will directly see the Panel custom, which is more or less what you are looking for.

• What a privilege is necessary for the judgment on the command line?

  I just finish to manage a bunch of files, something I think is sometimes easier to use a MS-DOS prompt with wildcards with. I wanted to put the computer power off and goto bed. I was connected with my normal user account when I published the shutdown command from the command prompt that I used instead of the mouse. To my surprise, I received this message:
  E:\Shared>shutdown s
  The operation completed successfully.
  A required privilege is not held by the client.

  I can understand this restriction for remote clients, but not for the users of the console. What privilege or registry setting would I need to activate this command works for all users of the console? It seems stupid when they can just as easily use Start-> turn off computer-> Turn Off power.

  I'm also surprised with this if the first time I tried it as a regular user in all these years. I use XP Pro, so I can change the local security policy and the security policy templates.

  Can I stop my system with an account standard account standard Windows XP SP3 in command prompt. Was curious when I saw your post.  I'm sure you have checked user account rights.  You have another user account to test?  I would create a user if you have not just to see what happens.

  Just found this, shows your exact error trying to shutdown from the command line.

  http://www.windowsnetworking.com/kbase/WindowsTips/WindowsXP/AdminTips/utilities/Cantshutdownfromcommandline.html

  If you have a Windows XP desktop computer and you try to stop your machine from the command-line by typing shutdown-s you might get the following in response to this command result:

  The operation completed successfully.
  A required privilege is not held by the client.

• How can I "go offline" from the command line?

  I have programs that need outlook and internet explore on purpose to be offline in order to make them work properly. Currently, I click on file > work offline before starting my programs. I was wondering if it was possible to do the same thing via the command line.

  John

  Search a bit, I found this article: http://support.microsoft.com/kb/195730

  What you can try, is go to

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings

  in regedit and backup the registry key (read the regedit help file to understand how to use it, if you have not before).  Before you run all programs, you can try to merge this key and see if then when you start IE or OE, they start in offline mode.

  The name of the value to the "GlobalUserOffline" and the value of 0 means online and 1 means offline.

  See if it works.  If not, you may need to operate this HKEY_USERS that describes the article and then you need to find the appropriate SID, but then you can do as I suggest above for this key and it should work.

  Steve

• Create shortcuts with the command line switches

  I have three versions of Word on my computer. (I know, I'm a masochist).

  There are times when I want to run one of them in safe mode. Those who get me if I run winword.exe /a in the run window let you guess.

  I know I can get it by including all the way, but it's a pain.

  I would like to make a few shortcuts in Windows that would do this for me. However, I don't know how to add the command line switches. I used to be able to properties (similar to editing a .pif file) but it doesn't seem to be an option.

  You * need to locate executable files and create each shortcut via right click on the executable file.  Shortcuts Microsoft Office may not be "real" classical shortcuts

  Right click and change the shortcut.  In the 'Target' box, add at the end command line switch.

  For example... I found the 64-bit Microsoft Office 2010 Word executable here:
  «"C:\Program Files\Microsoft Office\Office14\WINWORD."» EXE ".

  and created a shortcut on my desktop.  The "target", said:
  «"C:\Program Files\Microsoft Office\Office14\WINWORD."» EXE ".

  I added the / a that you pointed at the end, the target is now:

  «"C:\Program Files\Microsoft Office\Office14\WINWORD."» "EXE" /a

  In fact - the after typing all that above, I realized that there is a Microsoft Knowledgebase Article... Google worked and I do not use it.  Heh

  How to use the line switches of start command to start Word 2010, Word 2007, Word 2003, Word 2002, and Word 2000 (Method 2).

• Install programs by using the command line?

  My computer will not install packaged with Bitrock Installer programs.  How to do this? I used the command line in the past, but I forgot how.  It must be installed all by activating not the installer to Bitrock.  Or what I can do for my computer compatible with the Bitrock Installer?

  Hi sallysantlerart,

  1. what program are you trying to install?

  2. what happens when you try to install the program?

  You can consult the following links to install the program by using the command line:

  http://msdn.Microsoft.com/en-us/library/aa372024 (v = vs. 85) .aspx

  http://msdn.Microsoft.com/en-us/library/Aa367988 (v = vs. 85) .aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details

  Hello

  I can t open Google Earth or Microsoft Office programs because I get this message - the application could not start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.

  A few days ago I could open all what programs. I put t know what is the problem.

  I did sxstrace and that's what I have-

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe
  AssemblyDirectory = C:\Program Files (x 86) \Google\Google Earth\client\
  Application configuration file =
  -----------------
  INFO: File analysis shows C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50727.4053__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.5592_none_517247830f45081d.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Help, please!

  This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.

  Follow the steps below:
   
  Method 1:
  If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
   
  This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

  (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

  (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

  Step 2

  If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

  In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Package redistributable Visual C++ 2008 SP1 (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  I hope this helps.