When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."

Similar Questions

• I try to add a route using the route add command, the command response is "the requested operation requires a rise."

  I'm traying to add a route using the route add command, the command response is "the requested operation requires a rise."

  Command: route add 10.1.1.0 mask 192.168.31.3 192.168.31.33

  Whay can I do, because I had tried in many cases

  original title: route command

  In response to a previous and similar thread...

  You can watch using the PowerShell...

  http://TechNet.Microsoft.com/en-us/library/bb978526.aspx

  http://TechNet.Microsoft.com/en-us/scriptcenter/dd742419.aspx

  .. .and post this question on the forum of Windows PowerShell...

  http://social.technet.Microsoft.com/forums/en/winserverpowershell/threads

• That's why when I type ipconfig/flushdns in windows command prompt, it shows the requested operation requires a rise?

  Why when I type ipconfig/flushdns in windows works it shows that the requested operation requires a rise?

  Because you must run the command prompt with administrator for most active IPCONFIG commands to work correctly.  Just because your account is that an administrator account does not give appropriate rights as it did in XP.  Passive commands such as interfaces to display work correctly with a normal account, but commands like release, renewal and flushdns require that you run as administrator command prompt.

• Try to download Office 2003 on the new laptop running Windows 7. Get this, "the requested operation requires elevattion."

  I just new laptop to replace the old office.  It works with Windows 7 Premiure.  I am trying to download Office 2003 Pro but get this after I put in the code p/n.

  Line 12

  Code 800702E4

  The requested operation requires a rise.

  Thank you for your help.

  Did you first uninstalled any Office pre-installed trial version?

  You are installing from a cd or the installation of Office 2003 file? (A commercial version?)

  You are connected to the user win std account or did you create a guest account?

  If you are connected to the account admin win, rt click on the installation file and run it as admin

• Operation Failed, error 0 x 00000002 when you try to add printer on Vista Home Premium

  WiFi printer (Kodak ESP 7 all-in-one) works very well for centuries. Had to do a system restore with my HP under Vista Home Premium laptop. Then the printer could not be detected. Removed from the printer. Downloaded latest driver from Kodak. When you try to add the new driver/printer, it gives me an error 0 x 00000002. Also just tried to add the printer in the printer browser window and does not see on the wi - fi network, even though I know that it is connected.  Kodak assures me that it's an OS problem. I know that the print spooler and dependencies are running. Have tried various solutions several times between reboots.

  Hello

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the other links here

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Receiver error message: "error loading the TCP MIB library" when you try to configure a network printer on Windows 7.

  I can't find the answer anywhere else online. I get the error message: "error loading the TCP MIB library" when you try to configure a network of Xerox on Windows 7 printer.

  Steps to follow:
  (1) install the drivers
  (2) add printer > local printer > create a new Port > Standard TCP/IP / IP address
  (3) error message

  Can test the printer.
  Others may use the printer at the same IP address.

  Any other suggestions?
  Thank you!
  Angie

  Can be caused by corrupted files win7 or third parties who have replaced the ones win7

  (for example, ntprint.dll, tcpmib.dll, mgmtapi.dll, smmpapi.dll)

  Maybe run scanow, the System File Checker

• Error 0x800704b3 when you try to map a network drive

  Hello

  I have the following error message when you try to map a network drive in my home network:
  "\\iomegahmd cannot be reached" and the error code is 0x800704b3.

  I already looked in the services, and my strong assumption is that the problem is that 'TCP/IP NetBIOS Assistance' service is not statrted and it is disabled. When I try to start it, there is an error message:
  "The system could not find the specified path".

  I also checked the dependency of the 'TCP/IP NetBIOS Assistance' service components:
  Auxiliary function for Winsock driver
  NetBT
  TCP/IP protocol driver
  NetIO-legacy-TDI Support driver
  in the Device Manager is running, but they are all running. Startup is set to 'system '.

  Under the properties of version 4 of TCP/IP Internet of the wireless device, under Advanced-> WINS I ve put enable NetBIOS over TCP/IP, but it helps t is not either.

  What else could try, so that I can map network drives?

  I should also mention, that the problem persists for a few weeks. Before, it was working properly. In addition, on other computers on my network I don't have access to the same network drive problem.

  Thanks in advance,
  Tithe

  > I should also mention that the problem persists for a few weeks. Before, it was working properly.

  It of difficult to say what's wrong in your case. My first idea is: put installation beginning point of time before this error appeared.

  I recommend also to disable all security software and check if you experience the same problem.
  If you still experience the problem, then follow the link to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• I get "access denied" when you try to add the component 4543BD

  I get "access denied" when you try to add the 4543BD to my diagram. This component has been added since a previous version. I use Multisim version 12.0.0 student edition.

  Hi Diarra,

  I checked my database and the 4543 isn't in the student edition. If you open a drawing that was created in a version more recent as the education edition and copied the part to your database, when you place this part, you will get the access denied message.

  Attached is a diagram with the part, you can open it and build you circuit around it.

• My MMC crashes when you try to add the Certificates snap-in

  My MMC crashes when you try to add the Certificates snap-in

  Error: Microsoft Management Console has encountered a problem and needs to close.

  When to see the details, it shows a mfc42u.dll error.

  Hey Sankar,

  Try Mircosoft Fixit: http://support.microsoft.com/gp/slow_windows_performance

  You will need to authenticate Windows.

• When you try to connect to my router using the IP address, he continues to ask for a password of windows security.

  When you try to connect to my router using the IP address, he continues to ask for a password of windows security.  I don't know what it is, I tried recording with every combination I can think.  Can anyone help?

  If you do not know the password of the router, then chances are good that you will need to reset it to the factory settings. Google your model and you should be able to find the instructions.

  I hope this helps.

• I get a "cannot add that email address" when you try to add a new user. I have enough licenses available.

  I get a "cannot add that email address" when you try to add a new user. I have enough licenses available and was able to add more users later without error.  I have 3 email address that returns this error message.  I tried to add each several times that produced the error message every time.  Connected out of the session and back on and the error message every time.

  It is likely that these e-mail addresses already exist in the eSign environment and you are not allowed to add these emails.

  Please contact support about it, which can help with that.

• When you try to download an Overdrive audio ebook, the 0cC0002751 error message appeared. How can I fix it?

  How to fix error 0xC0002751

  When you try to download an Overdrive audio ebook, the 0cC0002751 error message appeared.  How can I fix it?

  Hello Ellen,.

  Please take a look at the following Microsoft article which seems to answer your specific question:
  http://support.Microsoft.com/kb/913800
  You can also try to download and run this specific update for Windows XP that should solve the problem you are experiencing:
  http://www.Microsoft.com/download/en/details.aspx?; amp; amp; amp; displaylang = en & id = 2292

• When you try to open Windows Messenger, I got the following. C:\ProgramFiles\Windows Live\Mesenger\msnmsg.exe side-by-side config incorect

  When you try to open Windows Messenger, I got the following.  C:\ProgramFiles\Windows Live\Mesenger\msnmsg.exe side-by-side config incorect

  Hello

  The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live Messenger community. Please visit the link below to find a community that will offer support to ask.

  http://windowslivehelp.com/product.aspx?ProductID=2

• I use a PC.  Problem: When you try to export my photo developed in the library, a message appears that says, "can't export, or offline or missing Source files."  How can I get my picture exported to my hard drive?

  I use a PC.  Problem: When you try to export my photo developed in the library, message box appears that says, 'impossible to export... '. Offline or missing source files. "How to fix this to export my photos on my hard drive?

  Lightroom is not in the expected location that he thinks that the photos are in the photos.

  This can happen because you have (perhaps accidentally) moved, renamed or deleted photos or folders containing them outside of Lightroom.

  The solution is to use your operating system to find the new location of the photos. Take note of where they are. Then in Lightroom, you can reconnect to them through these instructions: Adobe Lightroom - find folders and files moved or missing

  As an alternative, if the files were simply moved (and not renamed or deleted), you can use your operating system to move towards where Lightroom is expected to make them.

• Why my computer "freezes" when you try to add an item to the cart in the Amazon?

  My computer crashes when I try to add an article to my Amazon cart.  I deleted browsing history & cookies.

  How to get you the gel?