Start an application saved on the command line

Similar Questions

• System Restore cannot be started from any level, including the command line.

  Using XP Pro SP3. "System restore is not able to protect your computer. Restart your computer and run the restore of the system again. "Tried Msconfig and the following at the prompt to commande--C:\WINDOWS\System32\restore\rstrui.exe

  Using XP Pro SP3. "System restore is not able to protect your computer. Restart your computer and run the restore of the system again. "Tried Msconfig and the following at the prompt to commande--C:\WINDOWS\System32\restore\rstrui.exe

  Have you checked services to make that system restore is set to start automatically?

  http://support.Microsoft.com/kb/302796

• The application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details

  Hello

  I can t open Google Earth or Microsoft Office programs because I get this message - the application could not start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.

  A few days ago I could open all what programs. I put t know what is the problem.

  I did sxstrace and that's what I have-

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe
  AssemblyDirectory = C:\Program Files (x 86) \Google\Google Earth\client\
  Application configuration file =
  -----------------
  INFO: File analysis shows C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50727.4053__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.5592_none_517247830f45081d.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Help, please!

  This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.

  Follow the steps below:
   
  Method 1:
  If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
   
  This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

  (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

  (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

  Step 2

  If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

  In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Package redistributable Visual C++ 2008 SP1 (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  I hope this helps.

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• How to pass variables by using the command line when starting from a native application ActionScript

  How to pass in variables or arguments to start using the command line when starting a native ActionScript application? For example, I have my app MySweetWidget call and it was compiled with Adobe AIR runtime in captivity so now I have MySweetWidget.exe.

  In the command line, I call MySweetWidget.exe and would like to pass in variables or properties of the application. I guess that these variables are read from the loaderInfo.parameters object.

  Please let me know if the Adobe AIR runtime supports passing the parameters to native execution. If so, I would like to help determine the correct format of how pass variables. So would you want to read those loaderinfo.parameters object?

  Thank you

  Jeff

  I found the answer to my own question:

  Yes, it's a feature supported. It is documented on the following page:

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/desktop/NativeApp lication.html #event:invoke

  When you subscribe to the event from the NativeApplication invoke it will subsequently send the event and you read the table of e.arguments object to get the start in the native application arguments.

• How can I enter in the start page of the command line "firefox.exe"?

  I want to write a script to use firefox to download information about a series of addresses on a street. For example: 101 State St, 102, 103 State St State St,... etc. The script will travel addresses and streets, on interest. Firefox.exe accepts command line parameters that define a web page specific and data to be filled in this page?

  You can start Firefox to open a specific web page or a local file by adding the url to the command line, but you cannot specify the data to display, unless these data does not appear in the page source.

  • https://developer.Mozilla.org/en/Command_Line_Options

• Windows 7 on a computer hp laptop, start menu never ceases to appear and disappear if often I can't type on the command line.

  Windows 7 on a computer hp laptop, start menu never ceases to appear and disappear if often I can't type on the command line. I can open Google Chrome and click here to read the games. If I need to type anything it either in the menu popping up any program does not allow me to do. I have it in safe mode to try to run a full scan check but not able to do. Any suggestions?

  Help, please

  You have another keyboard, say a connected USB, try? If this occurs only when you try to type, I was wondering if the keyboard is faulty and its operation to sort of the windows key?

  If this is likely, you can try https://support.microsoft.com/en-us/kb/216893 if you click on the toggle bits.

  If not that, perhaps of possible malware? Can you go as far as to update your antivirus software and then run a full scan to see if it finds problems? When you say "able to do" whats happening?

• Deployment of final application with the command line Question

  OK so I have my finished application.

  on a folder in my office called "CODBOUG".

  So I tried different methods to run the application and complete the test on the Simulator with the command line. But it's just too much. So I need your help community!

  I tried:

  BlackBerry-deploy-installApp-package CallofDutyBlackOpsUltimateG
  

  uide.bar - device 192.168.18.128

  I'm a little lost with the help of the command line, if someone could guide me on the right lane.

  I'm on windows, btw.

  Thank you.

  When you run a command, Windows will search in a series of directories for this program to run. The list of directories is stored in what is called an environment variable. You must add the path to the bin of the sdk at this variable directory (e.g. C:\Program Files (x 86) \Adobe\Adobe Flash Builder Burrito\sdks\blackberry-tablet-sdk-0.9.3\bin).

  You can access the path variable by right-clicking on my computer > properties. Select the Advanced tab and click on approx. Variables.

  Under System Variables, search PATH and edit it. Add the path to the sdk bin directory (make sure that there is a semicolon, that separates the directories).

  Open a command line window in the directory where your .bar file. When you run the command, Windows will look for blackberry - deploy and can be found in the directory that you have added to your PATH variable so to run it.

• Unicode character on the command line

  I have a folder that contains a non-ASCII character, "registered sign" (®), which can be typed in a Terminal by using the-r option.

  It is U + 00AE, and as an 8-bit character, it is 174 decimal. I want to be able to enter this character on the command line without

  typing Option, because I have to build a Terminal command using an application that

  is not respectful of Unicode. So option-r helps me create a string that contains this character.

  For example, in the Terminal, I made a folder in ~ with as its name in full (I typed a r while pressing the option key):

  > mkdir ~ /.

  I can list help

  > ls ~ /.

  but I have to be able to do so * without using any modifier key * (as option).

  I thought I could use something like (after cd ~)

  > ls \302\256

  or

  > ls \u00AE

  or

  > ls \xc2\xae

  but I could not do the shell to interpret what I type as registered r symbol. Everything what I enter is interpreted

  literally as individual characters rather that, for example, the \xC2 is considered a single character. I also tried different combinations

  quotes as double the backslash, but I continue get "No such file or directory".

  How can I represent this character on the command line without modifier keys? I'm on El Capitan, OS X 10.11.2, running bash 3.2.

  Have you tried zsh instead of bash?

  I think bash supports \u starting only 4.2

• CAP of the command line and the 8800

  I have a terrible time this morning trying to release some software for the Blackberry 8800. In our generation, we have been calling the compiler of Cap 4.3.0 of the command line (which I always have loads of doubts) generating a cod file and unzip for OTA deployment. It worked ok for 8830 phones so far. Once we started to try to do the same thing for 8800 phones we hit a major roadblock. We started to experience random errors when loading our application on the device. (The problem is also reproduced in the AT & T 4.2.1 emulator.) Sometimes the application will work but only on a particular plu model Cingular blackberry where as our QA guy has a bit newer model phone. The application will also work if it is compiled using slightly different source code. The source code that causes a failure will run when compiled and loaded on the same device a build running with the other working source code. After attending the recent virtual conference, I learned that the compiler is not backward compatible. In other words, the CAP generated 4.3.0 cod files will not work on devices with an OS older than 4.3.0. My immediate reaction was to return to the version of the CAP to 4.2.0 and try again. I hit another block when I started having:

  WARNING! : no entry point found
  com.mypkg.MyMidlet: WARNING! : no definition not found [INFO] com.rim.resources.MyProjectRIMResources: error! : class: com.mypkg.MyMidlet has no members:

  So, I upped the version 4.2.1 retries and still got the error. Compiler error goes away with the 4.3.0 CAP but I'm not confident to go into production by using this compiler and targeting the older operating system. I use the same exact command line parameters in both cases. (I pass the flag - midelt and MyMidlet has a public ctor). Can someone tell me what has changed between 4.2.0 and 4.3.0. Y at - it another option or another flag that I have to give. Research on the error, suggests that the old compiler assumes a CLDC application instead of a Midlet. Could someone also explain if there is a problem to start the 4.3.0 SignatureTool.jar against the binaries generated by older Cap (if ever make us it work), targeting older OS 4.2.1? I am desperately looking for answers... Thanks in advance!

  This highlights a problem with Java environment.  Please see the link below for more information.

  Support - i/o Error: CreateProcess
  Article number: DB-00081

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800901/support...

• I get the error message: 87A required option does not appear in the command line.

  * Original title: errors

  I'm trying to reformat my Windows 8 operating system, because I have pop-ups, lack of slow response files and a host of other problems which seem to have started when my son downloaded things on the Internet. I have missing files and was trying to solve this problem so that I could go back to reformat the hard drive.

  I get the following error:

  Error: 87

  A required option is missing from the command line.

  Make sure that /index or/Name is specified.

  The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

  How can I solve this problem?

  MD

  How are you trying to "reformat"?

  Have you thought about running a malware first application to see if it is the problem?

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• AfterFX.exe always returns 1 on the command line

  I'm trying to script AfterFX.exe to stuff of a command line process, apparently like many people who use this interface.

  
  I found that AfterFX.exe (CC version at least) always returns 1 at the command prompt if the shell wait so he could get out. I would like to use error codes to indicate success or failure, but apparently, despite documentation (after effects Scripting Guide) telling me to value exitCode however, I wish... 1 is the return value. Even if exitCode is zero.

  Directly immediately AfterFX.exe running from the Shell returns so the return code is not useful. If you start with start/wait (indefinite display i.e. start/wait "dummy" "C:\Program Files\Adobe\Adobe after effects CC\Support Files\AfterFX.exe" r - c:\path\to\my.jsx - noui) then the shell does not come until the application is made. You get this same behavior without the start/wait stuff if AFx is managed via the batch file (which is how I use it). Therefore, the return code is unnecessary.

  
  Does this happen for others, it is in its State (i.e., run that after Effects is just a mistake, lol), or...?

  In addition,

  > start "dummy" / / wait "C:\Program Files\Adobe\Adobe after effects CC\Support Files\AfterFX.exe" s '' alert ("Hello")'; app.exitCode = 88' - display undefined noui

  > echo %errorlevel%

  1

  The existence of display undefined-noui doesn't seem to affect the return code. The ILO "dummy" on the command line is a requirement of departure when launching applications with arguments (it's a bit esoteric, but it must be there).

  Yes, I found that you must use AfterFX.com instead of AfterFX.exe. I also remember that it is documented in the documentation of the extension Script somewhere; not really yelled that the examples all use AfterFX.com.

• VMWare Player startup with the command line command does not work!

  Hello everyone,

  I'm new to the community and it will probably show. So, I say sorry in advance for the flaws, I'll do. Since I am of German native language I need to translate it into English. So, I could use special terms wrong, but I'll certainly try to avoid this. Just keep in mind. And now my question:

  I was running VMware Player 3.0 with VMware Tools installed and VMware VIX 1.8.0 installed on a host of Win7 Ultimate 64-bit. The Useraccount on the host has administrator rights. Guest operating system is WinXP SP3. Since I need two softwares of different recording/Dictation on my workstation and I could only one of them simultaneously open (which is very uncomfortable, when you need to change frequently), because those two were always challenging who got to use the microphone, I installed a second microphone (that only the application for the two contest) and then created a virtual machine to run the software second with one of the two microphones connected only to the prompt. (Directly/comfortably) to start the second software I created a. LNK shortcut file (and attached to the startmenu) who run the command

  Departure of player "C:\Program Files (x 86) \VMware\VMware" t "C:\Users\USERPROFILE\Eigene virtual Computer\Recorder Windows XP Pro Windows XP Pro SP3.vmx VM SP3\Recorder VM.

  with the recorder VM "VM Windows XP Pro SP3" opening the second software automatically (autostart).

  This worked well, until I updated my VMware Player to 3.0.1. Since the update however, my shortcut file simply is unable to start the virtual machine. However, starting the virtual machine of VMWare Player normal window still works. By running the command mentioned above constitute the command line prompt, I got the information, this vmrun.exe could not connect to the host, due to an error, the specified version is not found, which probably means that the VMware Player.

  P:\ & gt; "" Player t C:\Program Files (x 86) \VMware\VMware VIX\vmrun.exe "start"C:\Use ".

  virtual rs\USERPROFILE\Eigene Computer\Recorder VM Windows XP Pro SP3\Record

  ER VM Windows XP Pro SP3.vmx"

  Unable to connect to the host.

  Error: The specified version is not found

  P:\ & gt;

  I tried the VMware VIX update (from 1.8.0 to 1.8.1) without success. The errormessage even remains.

  The three relevant paths for VMware Player, VMware Vix and the VM are spezified in the systemvariable path as follows:

  % SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\; "" C:\Program Files (x 86) \VMware\VMware VIX ". "" C:\Program Files (x 86) \VMware\VMware Player. " "' Virtual C:\Users\USERPROFILE\Eigene computer; C:\Program Files (x 86) \QuickTime\QTSystem\

  Today suddenly wrong?

  Any help would be greatly appreciated.

  Thanks in advance to one that solves the Enigma.

  Hello

  Meine VMs starte ICH mit dem VMplayer so:

  vmplayer.exe _

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• 10.11.5 only stops the command line

  I have an iMac late 2013 and since the public beta 1, up to the final version of the published 10.11.5 today, my computer just stops or restarts from the command line. There is no problem on 10.11.4.

  Please, what can I do?

  Quit all applications and then disconnect all external devices except the mouse and keyboard and try a stop