an error occurred resetting on usb drive

Similar Questions

• 8.1 Windows Media Library problems because there are read errors after removing the USB drive

  Whenever I plug a USB key with music on it; It gets automatically added to my library of players. Then when I remove the USB key; I left with a lot of read errors. How can I get my USB drive does not automatically add its contents. I set AutoPlay, even not use. This never happened with Windows 7.i do not know what they changed to do this.

  Hello Chris,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the issue.

  This problem can occur either because of bad parameters of Windows media player.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Resolution of the problems of Run Windows media player library and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press ENTER.
  b. click on 'show all' and then click 'Windows Media Player library'.
  c. click 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Database rebuild Windows media player and check. Please follow these steps:

  a. press Windows + R key, type %LOCALAPPDATA%\Microsoft in the immediate window and press ENTER.
  b. Select the "Media Player" folder, right-click on it and select delete.
  c. restart Windows media player.

  Note: Windows media player automatically rebuilds the database.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Apple Mobile Device USB Driver has not passed Logo testing for compatibility with Windows XP, I ran the suggestion to "fix" 925196 that it still does not work. What can I do else?

  Bought the iPhone 3 g (not 4) trying to run the material but get the following error: Apple Mobile Device USB Driver no has not passed Windows Logo testing to verify compatibility with Windows XP continues the installation of this software may impair or destabilize the functioning of your system.

  Windows XP Service Pack 3 is running.

  I ran the 'Fix - It' 925196 solution, but the problem could not be solved. What is a malware problem?

  Hi deanie3,

  We will check if the following is useful.

  Method 1: Run the next Fixit and check the issue.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the steps in the below article mentioned to see if it helps.

  You cannot install some programs or updates

• USB driver is not support for HP Deskjet 1050 j410a.

  My HP Deskjet 1050 j410a is installed on a windows 7 and show a code 37 error message which means usb driver is not supported. I had reinstalled so many times and also restarted the pc but the problem does not resolve itself. kindly help me to solve this problem.

  Hello

  Make sure you first upgrade the driver by uninstalling the HP software and install the latest version below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109412-2&cc=us&DLC=en&LC=en&OS=4062&product=4027465&sw_lang=

  If the same continues to try to plug the USB key into a different port on the PC and check any change.

  Then try another device (for example, the disk on the key) and check if you can see a similar behavior, if so the problem may be with your PC Chipset problem.

  If the issue appears only on the Deskjet 1050 and no step has not resolve the problem, try an another USB cable from the printer and check any change.

  Shlomi

• An error occurred when to partition the drive

  I have a MBP 2012 retina end 13 "El Capitan 10.11.6

  The hard drive in the machine is swapped with Transcend SSD of retinaTRIM is not enabled.

  I'm trying to install 10 Windows using Boot Camp, and I get this error.

  An error occurred when to partition the drive

  Your drive cannot be partitioned.

  I've tried-

  • reset the PRAM,
  • First aid running in the desktop utility and
  • running/sbin/fsck - AF in single user Mode.

  Nothing has worked.

  Any help is greatly appreciated.

  Maybe you have not enough contiguous free space to create the partition.

• Password reset disk error - "year error occurred while the wizard attempted to set the password for this user account.

  Hello!

  -A bit of background: the desktop PC that I use is Windows Vista Ultimate Edition, with active user accounts total five. I have my own account, and I can access the computer through (or through account from my brother, because I know its password).--

  I had this problem recently came where the administrator password (that I know for a long time and never changed) no longer works. So, after some research, I created a reset password on a USB disk, that I found in my house. I managed to create the disc, but when I tried to put the new password, I got the message error "an error occurred while the wizard attempted to set the password for this user account', which I must say is not very clear. I found a few methods of force - reset the password for the account of the admin, as using a sort of Windows Vista DVD or go to Safe Mode to find the hidden administrator account... but I have no idea what this DVD is or where to find, and in Safe Mode, there is no account user administrator to be seen. I believe that my machine is corrupted, but I don't want to buy a new. I want just to reset a password...

  Any help is appreciated. If I was not specific enough, I can specify in comments.

  Thank you!

  Hello

  You must make a password reset disk before that there are problems with a password, not afterwards.

  ________________________________________________________________

  Read this for your problem:

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  _____________________________________________________________

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• attempt to copy to the windows drive is not an unknown error occurred (-54)

  When syncing my iPhone, I get the following error message near the end of the processs of 6s + 128 GB

  attempt to copy to the windows drive is not an unknown error occurred (-54)

  
  

  Someone has an idea what is the cause to happen and what I can do about it?

  Thank you

  Hello

  Here is a solution for your problem

  http://www.IMore.com/having-trouble-syncing-iTunes-after-updating-Windows-10-her're-your-fix

• Satellite Pro M10: IO error, cannot read DVDs/CDs, USB driver for Port Replicator

  I had to format my m10 pro like the multidrive dvd kept as an IO error and refuses to read my dvd/cd etc.
  I reloaded all software and the multidrive dvd (Panasonic coursc 810) will always return the same IO error.
  I have also continued to asked a USB driver load? Replicator port, I can't find my original installation CD?
  Someone help please?
  Thank you very much
  Joe Dawson

  [Edited by: admin on 21 January 06 16:24]

  Hello Joe

  I saw in some your previous assignments that you use external DVD drive too.

  I use my Tecra with Replicator port and a multi LG external DL disk attached to the port replicator (due to the fast data transfer firewire connection). Everything works fine and I wonder how you can have all of these problems.

  If your device is set up correctly, including all the original drivers, tools and utilities that you can find on Toshiba download page should not have any problem. I hope that you have installed the unit without port replicator and you don t forget Mobile extension tool. As much as I know there is no driver for Replicator port and all the signals are loop just to the ports of the replicaror port.

  What is the status of the Panasonic player in Device Manager? The drive is displayed in Windows Explorer?

• Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

  Original title: problem installing scanner

  EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

  Hey there, MAHIPALSINGH143

  Welcome to the Microsoft community forums.

  So that the community help to install your printer, we will need more information. Please answer these questions:

  1. Windows what operating system are you running (Windows 10, 8.1, 7)?
  2. The troubleshooting steps have so you far?
  3. Did you upgrade to a new operating system?
     1. If Yes, what operating system you were on before?

  When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

  Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

  When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

  Kind regards

• Stopper 0x000000F7 blue screen error occurs when you try to access the floppy drive.

  The error occurs on computers 3differnt.  Sometimes using "My Computer" to access the floppy drive.  Malware, spyware and viruses, the computer has been verified.  Clean everything. No new disk drivers listed.

  Tell us what you have done that you are convinced that it's clean... Here is a description of the error code in the Windows debugging tools help file:
  "Bug Check 0xF7: DRIVER_OVERRAN_STACK_BUFFER.
  Bug Check 0xF7: DRIVER_OVERRAN_STACK_BUFFER

  Bug DRIVER_OVERRAN_STACK_BUFFER control has a value of 0x000000F7. This indicates that a driver has saturated a stack-based buffer.
   
  Parameters

  The following settings are displayed on the blue screen.
  Description of the parameter
  1 the battery's actual security check cookie
  2 the expected security check cookie
  3 the bit complement of the expected security check cookie
  4 0
   
  Cause

  A driver invaded a buffer based on the stack (or a local variable) in a way that would have replaced the function's return address and jumped to an arbitrary address when the function returned. »

  This is the classic "buffer overflow" attacks of piracy in my opinion. The system has been reduced to prevent a malicious user to take complete control of it.

  This is very probably a malware problem or a problem with a driver.  I suggest several anti-malware scans to make sure you are clean and then begin to check your drivers to see if there are some more updated versions available.

• Sharing of readers do not reconnect - error "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  Original title: Shared readers do not reconnect

  I have two PCs connected wireless. A laptop (Vista Business) was the drives mapped to actions on the other PC (XP). Whenever the Vista PC is started or out of hibernation, or after only a short period of time these discs are not available. Click on the drive in Explorer to display the message "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  If I click on 'Network' within Solution Explorer, the XP PC is not visible. The only way that I can "reconnect" these disks is to go into my anti-virus (Trend) and open the network map. This shows the XP PC and then the shares are available through Explorer - XP PC is still not visible by clicking network however.

  It started only happens in the last two months - cannot locate exactly when, but quite recently. I use connections to store small files and backup critical files a few before nailing the laptop away and it is quite annoying to have to go through this routine every time.

  Any ideas?

  Just in case it helps others - I found that if I make sure that my XP PC has a fixed IP address, and then set up the shares so that they are defined using the IP address and not share names, then I do have more problems - seems like it's something to do with Windows solve the share names rather than something to do with the personal firewall after all.

• Year Error Occurred While ejecting DVD/CD-RW drive

  My dvd/cd-RW drive is recognized in windows 7 and said that the work, but when I go to open it, I get "an error occurred eject disc dvd/cd-rw" and nothing happens. Two days before that I had burned a recovery of AVG disk barely shoot a problem on another computer and everything's fine. The next time I went to use the error message appeared. I reinstalled the drivers and delete the upper and lower filters in regedit as recommended by Microsoft, with no result. Any help will be appreciated,

  I replaced e DVD/CD player and everything works fine now. The problem was the original CD/DVD drive has failed.

• How can you correct - an error occurred in ejecting ' DVD RW drive (e) "."

  I was wondering what is happening. Works perfectly an hour ago now, it does not respond when I press the button to eject the trey. When I try right click then eject it comes with, an error occurred while ejecting ' DVD RW drive (e) "." What is happening to her?

  Hi Scorpion1138,

  Please use the forum.

  Quick question, have you tried to reboot your PC and eject the DVD until windows loads? It might just not be well wedged into the slot.

  Give that a try and let us know if it worked for you.

  JohnD
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error ' year error occurred while ejecting cd rw drive E: "Windows 7

  Original title: cd tray stopped working.  an error occurred when ejecting cd rw drive E.  I think it has something to do with IHP k LAUNCHER and simple save hard drive

  CD tray stopped working.  an error occurred when ejecting cd rw drive E.  I think it has something to do with the fact IHP k LAUNCHER and simple save hard drive.

  Hi Martin,

  I understand the inconvenience caused to you. I will certainly help you in this matter.

  This could be due to the CD/DVD drivers not updated or physical corruption.

  I would like to know;

  1. What is the brand and model of your computer?
  2. How do you try to eject the CD?
  3. Do you have any pending updates?

  I suggest the following methods and check.

  Method 1: run Convenience hardware store

  The convenience store is a tool that will check the hardware attached to the computer for all known with him of the issues and provides details and how to fix them. Follow these steps and run the troubleshooter.

  Follow the instructions in the link given below to run the Troubleshooter:

  Open the hardware and devices Troubleshooter

  If the problem persists, follow method 2.

  Method 2: Bad eject button.

  1. Press Windows + E on the keyboard

  2. Right click on the drive icon and choose the option to eject it.

  If it is ejected from your CD-ROM drive tray button on the hard drive is faulty and it is recommended that you replace the disk, if not use method 3.

  Method 3: Update the drivers.

  I suggest you to update the drivers for CD-ROM/DVD-ROM and check:

  Steps to follow:

  1. Press on Start, click on Control Panel
  2. Select Device Manager.
     Double-click on CD/DVD-ROM drives.
  3. Right-click on the device, and then click Update driver software.
  4. Select search automatically for updated driver.
  5. Restart the computer.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• Download tool Windows 7 USB/DVD - bootsect USB drive error - desktop windows Home premium 64-bit

  So I get the bootsect error when you create a windows 7 Professional 64 bootable USB key when the machine I'm using is windows 7 Home premium 64-bit! Anyone know what is happening here?

  Thank you

  Hello Hardwareeingineer,

  Thanks for posting your question on the forum of the Microsoft community.

  According to the description of the problem, it seems that you are facing problem creating bootable USB drive. If you get the error bootsect so I recommend you follow the suggestion provided by Sanketp responded on July 4, 2010 in the following thread.

  Problem using the USB/DVD of Win7 download tool (concerning bootsect.exe)

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.