-
Minecraft fatal error has occurred (4): Connection Reset?
When I start Minecraft, it starts to download the packages, then it stops just to the random % and never ends download.
I've never had this problem before and I don't know what might be the causes as the only changes I made to my computer is a few games on Steam, I installed...
After about 15 minutes, I get a message saying of Minecraft:
Fatal error occurred (4): connection reset
And this happenes, all, simple, time
I have a 32-bit computer ADVENT laptop with Windows Vista?
Thanks for reading! Help, please! :)
Hi guy,
Method 1
If you encounter problem when installing the game, then I you suggests to disable all antivirus and then try to install the game.
Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.
Method 2
Perform the clean boot and then try to install the game.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: follow step 7 of section of boot KB929135 to the computer in normal mode.
If you have any known issues with the game, then I suggest you to contact the game manufacturer.
-
Connection reset error for UNIX connector
Hello
While trying to perform research for unix connector, I get the error in the log below.
java.net.SocketException: connection reset
For this error in the oracle documentation, it says to resolve this problem, verify that you set the UseSSL parameter value in the target system and the connector server COMPUTER resources to yes
and true,
respectively.
But we do not have a server connector and in the COMPUTING resource for target system, there is no UseSSL parameter?
Please suggest
[2015-08 - 03T 11: 21:23.349 - 07:00] [oimext_server1] [WARNING] [] [oracle.iam.scheduler.vo] [tid: OIMQuartzScheduler_Worker-4] [username: oiminternal] [ecid: 77744a889dde03de:-6b95b905:14ee65bb481: - 8000-0000000000000003, 1:30684] [APP: IOM #11.1.2.0.0] IAM-1020021 cannot perform the work: UNIX user group search Recon xxxxxx with history Job Id: 132260 []
org.identityconnectors.framework.common.exceptions.ConnectorException: com.jcraft.jsch.JSchException: Session.connect: java.net.SocketException: connection reset
at org.identityconnectors.framework.common.exceptions.ConnectorException.wrap(ConnectorException.java:101)
to org.identityconnectors.genericunix.GenericUnixConnection$ 3.access(GenericUnixConnection.java:340)
at org.identityconnectors.common.security.GuardedString.access(GuardedString.java:105)
at org.identityconnectors.genericunix.GenericUnixConnection.createSSHConnection(GenericUnixConnection.java:328)
at org.identityconnectors.genericunix.GenericUnixConnection.connectResource(GenericUnixConnection.java:87)
to org.identityconnectors.genericunix.GenericUnixConnection. < init > (GenericUnixConnection.java:74)
at org.identityconnectors.genericunix.GenericUnixConnector.getConnection(GenericUnixConnector.java:138)
at org.identityconnectors.genericunix.GenericUnixConnector.checkAlive(GenericUnixConnector.java:118)
to org.identityconnectors.framework.impl.api.local.ConnectorPoolManager$ ConnectorPoolHandler.testObject (ConnectorPoolManager.java:105)
to org.identityconnectors.framework.impl.api.local.ConnectorPoolManager$ ConnectorPoolHandler.testObject (ConnectorPoolManager.java:74)
at org.identityconnectors.framework.impl.api.local.ObjectPool.borrowObject(ObjectPool.java:229)
at org.identityconnectors.framework.impl.api.local.operations.ConnectorAPIOperationRunnerProxy.invoke(ConnectorAPIOperationRunnerProxy.java:83)
to com.sun.proxy. $Proxy506.search (unknown Source)
at sun.reflect.GeneratedMethodAccessor3690.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.identityconnectors.framework.impl.api.local.operations.ThreadClassLoaderManagerProxy.invoke(ThreadClassLoaderManagerProxy.java:107)
to com.sun.proxy. $Proxy506.search (unknown Source)
at sun.reflect.GeneratedMethodAccessor3690.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
to org.identityconnectors.framework.impl.api.BufferedResultsProxy$ BufferedResultsHandler.run (BufferedResultsProxy.java:162)
Caused by: com.jcraft.jsch.JSchException: Session.connect: java.net.SocketException: connection reset
at com.jcraft.jsch.Session.connect(Session.java:525)
at com.jcraft.jsch.Session.connect(Session.java:161)
to org.identityconnectors.genericunix.GenericUnixConnection$ 3.access(GenericUnixConnection.java:336)
... more than 20
Thank you
My guess is EXIT 328 do not get a response from the server because of permissions or cannot perform the work - check your permissions for remote access and file access system--cannot be a code to deliver all this.
.createSSHConnection(GenericUnixConnection.java:328)
Exit 328
-
Excite AT10-A-104 error after factory reset
Hello
I have reset my Tablet: excite AT10-A-104 to the factory setting (I bought the unit in 10.2014).
The process has completed correctly and update proceeded correctly.
Tablet starts correctly but after 30 sek. He starts the long inscription of the device with the error: device Toshiba App Instaler recording: "the software updates check error".
The same situations when I use applications: Toshiba App manager: "network without an available internet connection error. Connect to Internet, and then try again to update your software.
My internet connection is OK.
Thanks for your help!
I have exactly the same problem, can not see the answers, have you sorted and how? Thank you
-
Connection broadband drops error 12029 connecting to Microsoft
original titleL my broadband guard down as often as 3 or 4 times in the span of an hour. When I connect to IE8 a msg frequerntly Windows back in the diagnose connection problems
Since I changed my router on a month ago (BT HomeHub), my broadband connection keeps falling as often as 3 or 4 times in the span of an hour. When I finally connected to IE8 a Windows XP msg frequerntly arrived in the "window to diagnose connection problems.
Error 12029 connecting to MS, connection with the server could not be established.
Also error 12031 MS server reset, successfully connected to www.hotmail.com.
MS keeps referring me to my ISP or the manufacturer of the software firewall.
Whenever BT checked the line for fouls but there is nothing reported.
What happens if something can do to remedy this?
Hello
Just to put you in tune with my problem.
They sent me two more host regional centres 3 and 2.0.
I plugged the 2.0 directly into a filter and then into the master socket. All the lights were blue.
Then, I plugged the phone line on the same filter and got a tone.
As soon as I checked tone BB light has started flashing on the new homepage Hub2.0.
I then plugged a filter separated from older style (came with my BT Voyager 220V router) of the phone line then connected the filter to an old outlet that I haven't used for more than 10 years.
BB blue light stayed stable on the 2.0.
I was able to make a call on my phone without the BB stall DECT.
I tried 5 filters total on the BB line and the phone, which came with each of the new hubs.
It was just a fluke that I thought to use the old style filter that I used when my old router was in place.
I received a phone call this morning BT say they had gone as far as they could go with their tests and were sending a technician to check the master socket and internal wiring, with a warning that there will be a surcharge of £99 if my son was at fault.
You can imagine what I told them to do?
You were correct in your assumption that it is almost always the filter that is causing the problem.
Thanks a lot for your help.
OBJ
-
Resolved - getting error when connecting to the remote database to the host
Hello
I try to connect to the remote form of database host and get error. Can someone please help.
I've seen a few threads about similar issues, but I am not able to solve this problem.
I use Oracle Apps 12.2.0, Linux 5.1, Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit, using SQL Developer to connect.
I am able to connect using SQL Developer in distance and using the same credentials in SQL Developer host, but in error
Status: Failure-Test failed: IO Error: Connection reset
The host
I am able to ping remote, but cannot tnsping
The tnsping error-
Use settings files:
C:\app\oracle\product\12.1.0\dbhome_2\NETWORK\ADMIN\sqlnet.ora
EZCONNECT adapter used to resolve the alias
Try to contact (DESCRIPTION = (CONNECT_DATA = (SERVICE_NAME =)) (ADDRESS = (PROTO
(COL = TCP)(HOST=192.168.1.102) (PORT = 1521)))
AMT-12547: TNS: lost contact
Here are more details
I have added the following in the TNSNAMES file. ORA file
SCREW =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.102)(Port= 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = SCREW)
)
)
I have added the following in the listener
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.102)(PORT = 1521))
)
)
Finally - the firewall is disabled in Linux Machine
Can you ping the server IP (or nomhote.nomdomaine) address of the client machine?
What is the error you get when you issue "tnsping SCREWS" of the client machine?
You have added the following entry to your client's tnsnames.ora file?
+++++++++++++++++++++
SCREW =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.102)(Port= 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = SCREW)
)
)
+++++++++++++++++++++
Can you reproduce the problem with sqlplus? If so, please see (11.5.10 news: run SQL * Net access for guests (Doc ID 291897.1)).
If the problem with SQL Developer only, please see (SQLDeveloper receives ' java.sql.SQLRecoverableException: IO Error: Connection reset "and ORA - 609 database alert (Doc ID 1483287.1)).
Thank you
Hussein
-
javax.xml.soap.SOAPException: Message send failed: connection reset
Hello gurus,
I try to install IAM on a cluster deployment. I have a physical as a front-end load balancer, which ensures the load to alternately between the two servers where IOM managed servers are deployed.
When I try to start an approval process, SOA server seems to not be able to connect to the servers of the IOM, which gives the following error:
< 23 April 2012 12:01:11 CEST > < error > < oracle.integration.platform.blocks.soap > < BEA-000000 > < could not send request to http://identitymanagement.mydomain:14000/workflowservice/CallbackService because of the exception
javax.xml.ws.WebServiceException: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: connection reset
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:851)
where < identitymanagement.mydomain > is the host name of the cluster. Maybe SOA calls are directed in the timeout while trying to connect to the IOM (cluster balancing algorithm times), so, considering that Web services take time to answer (say 10 min), I want to know if there is such a setting on SOA to configure so that it never go into the time-out in the meantime that web services to answer.
Thank you
Carole Ejani,
If you want to confugure time-out, see as follows:
Re: Asynchronous BPEL 2.0 problem - Transaction rolled back to
But I'm not sure that it is on the side of the soa. Try to increase the parameters of time-out on the (Bounce the server SOA) load balancing
Arik
-
M40-112-WLAN-connection-reset
Hello
I have problems with my M40-112 new for WLAN connections. From time to time the connection will be reset and connected again.
Other users have the same problem. There is no reason to find it by the access point. My old toshiba with WLAN pcmcia has never had connection - reset and no other cell phones in our network don't have such a problem.
There is no real driverdownloads...
Help, please!
Kind regards
Frank Neitzel
[Edited by: admin]
Hello
As you can see there are a lot of discussions on the Intel (r) PRO/Wireless 2200BG card. I found a very interesting discussion. Check it please on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4861.
-
We get an error "NETWORK CONNECTION ERROR, make sure a firewall is not blocking access to the printer.
* Original title: printer error...
I was printing with a printer wireless for months and now all of a sudden I'm getting an error, NETWORK CONNECTION ERROR and then readings make sure that a firewall is not blocking access to the printer. I checked and it is not blocked... I did a session of disorder and it reads no problems found. Can someone please...
Hello
1. what version of Windows is installed on the computer?
2. What is the brand and model of the printer?
3. you have any non-Microsoft firewall installed on the computer?
4. what security software is installed on the computer?
5 have have there been recent changes made on the computer before the show?
Please follow the steps below and check if that helps.
Method 1: Run troubleshooting network printer and check.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
Method 2: Select the file and printer sharing
http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing
Method 3: I suggest to change firewall security settings, or disable the security software on the system and try to access the printer.
Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
For more information, see the articles and check out them.
Understanding Windows Firewall settings
http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings
Enable or disable Windows Firewall
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
Allow a program to communicate through Windows Firewall
http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall
Let us know if it helps!
-
When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it?
"socket error".
When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it? Is - this type of error called a winsock error? It keeps happening to me on this site. What I've read, it happens when you make changes to a program before concluding that under its weight. Could it happen because I'm deleting files, I don't think that will be completed while the other files are D/Ling? That's what I'm doing wrong? I found a solution to correct an error in Winsock that is to enter the "command prompt" and type "netsh winsock. Will this work? (I'm sorry I have so many questions in this post, but I have had TO KNOW!!)
Hello
I suggest you send the question here for best support about the issue.
-
Error: A connection has been established with the server, but then an error occurred during the connection process.
Hello
I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:
ID from step 1
Server NIBKSQLCLUST
Job name LSBackup_DRIB
Newspaper log shipping backup job step name.
Time 00:00:02
SQL severity 0
SQL Message ID 0
Operator by e-mail
Operator Net sent
Operator paged
Retries attempted 0
Message
2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.
2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.
2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.
2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-
The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.
Thank you
Boonlep coulibaly
Hello
I suggest you to send your request from the link and check.
http://msdn.Microsoft.com/en-us/hh361695.aspx
http://msdn.Microsoft.com/en-us/library/bb545450.aspx
-
Internet does not work, make HTTP: error 12007 connection
* original title - error 12007 I need help! *
I have a Windows XP with Service Pack 3 internet does not work. I got tired, he works with this http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/error-12007-the-server-name-or-address-could-not/2cbfb8a8-8970-4aaf-843c-1c781dc8053f post, but when I tried it on my netbook my windows update comes out of @%SystemRoot%\system32\shell32.dll,-22580
I have an idea I have a missing or corrupted WinSock, but I'm not sure.
Diagnosis of last run time: 23/01/12-18:52:53
WinSock diagnostic
WinSock status
attmpting error information to validate the WinSock providers database: 2
error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
user redirection of information in support of the appeal.
user redirection of information in support of the appeal.
Diagnosis of network adapter
|
Network location detection
|
|
Info
|
Using the Internet connection at home
|
Identification of network adapter
|
|
Info
|
Network connection: name = Wireless 3 network, device = Broadcom 802. 1 1 b/g WLAN, LAN = Media Type, type SubMedia = wireless
|
Info
|
Network connection: name = connection to the network of Local 2, device = Atheros AR8132 PCI - E Fast Ethernet Controller, Media Type = LAN, type SubMedia LAN =
|
Info
|
Connections Ethernet and wireless available, ask the user for selection
|
action
|
User input required: select network connection
|
Info
|
WiFi selected
|
State of the network adapter
|
|
Info
|
The network connection status: connected
|
|
HTTP, HTTPS, FTP Diagnostic
|
HTTP, HTTPS, FTP connectivity
|
|
warn
|
HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
|
warn
|
HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
|
warn
|
FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
|
warn
|
HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved
|
warn
|
HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved
|
warn
|
FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
|
error
|
Could not make an HTTP connection.
|
error
|
Could not make an HTTPS connection.
|
error
|
Could not make an FTP connection.
|
|
Hello
You can refer to the suggestion provided by Divya the similar thread with a possible solution:
http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/error-12007-the-server-name-or-address-could-not/2cbfb8a8-8970-4AAF-843c-1c781dc8053f
-
error cannot connect to vworkspace broker for connections. Please contact your system administrator.
Hello
our current facility is the next version:
vWorkspace Version 7.5.304.547 on Windows 2008R2 Standard.
When a new user logs in via the HTTP link brokers, they see the web portal with the logon text boxes, but when they enter their credentials, they receive the following error message:
error cannot connect to vworkspace broker for connections. Please contact your system administrator.
existing users can connect without problems. We have verified that the user account is not locked.
I checked the link, however, we have much farm.
I restarted the connection brokers and checked the event logs without finding the problem.
Good skills in Debug. I remember that the 8000 Char limit. Well, the good news is, we have fixed this bug 4 years ago! He has been vice Id 191744
It was fixed from 7.6.
If you have a support contract, you can switch to one of the newer versions and the problem is solved.
-
vWorkspace 8 - VDI Windows 7 "Error cannot connect to the server '.
Hello
We are soon about to begin the deployment of our vWorkspace VDI solution. We have Windows 7 Client s connection to Win 7 Pro 32 Bit VM on Hyper-V.
Sometimes when the user intiates a connection to the desktop of Windows 7 VDI published the vWorkspace Client launch and are trying to connect, and then an error will be presented "Error cannot connect to the server. We do not understand all the time and it is random.
Go it is addressed urgently as it's going to cause some major headaches with our users.
Someone at - it ideas?
Cool, thanks Dan.
I'll find the case of Mike and send the info from there.
-
"Error: current connection" while creating the debugtoken
I tried to create a debugtoken for my Webworks app. I used the following code:
BlackBerry-debugtokenrequest - storepass
devicepin-
But the execution fails with the error message: "error: current connection.
Anyone know the reason for this message?
Well I fixed it. The reasons were the firewall settings...