Connection reset error for UNIX connector

Similar Questions

• psxrun error when installing utilities and SDK for UNIX Applications

  Platform: Windows 2008 R2 (VM) 64-bit

  I've added the feature "Subsystem for UNIX - based Applications" and then in the installation process "utilities and SDK for UNIX - based Applications Setup Wizard." However, I'm getting Psxrun error with the message "Unable to connect to Subsystem for UNIX - based Applications."

  I checked the event log and noticed that the event ID is 2008, so I googled and found the following link:

  http://TechNet.Microsoft.com/en-us/library/dd348833 (v = ws.10) .aspx

  But the solution is application using the POSIX after installation, not during the installation. If someone had the same problem and knows the solution to this, please help.

  Hello

  Welcome to the Microsoft community.

  The question you posted would be better suited in the TechNet Forums. I suggest you to ask your question in the TechNet Forums for assistance.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

  Thank you

  Kulu Sharma.

• an error of connection reset

  I always connection reset error seems to happen on my computer, I checked antivirus and im
  err_connection_reset
  by using this 'Ultra' called ethernet card, I tried many things such as the CMd commands and others again
  err_connection_reset
  work does not help please. I also noticed that my Skype sometimes disconnects and reconnects after 2
  err_connection_reset
  minutes and this happens often. Would it still a problem ISP? I also have to reset my router and does not yet etc.

  Hi John,.

  Welcome to the Microsoft community.

  It seems that you have an intermittent problem of the Internet connection. Please help me by answering the following questions:

  1. don't you make changes on the computer before the show?

  2 does happen with all browsers?

  3. what browser do you speak?

  I suggest you carry out the methods and check them off below if it helps:

  Method 1: Reset Internet Explorer settings

  Use this method if you are using Internet Explorer. See the following site:

  How to reset the settings for Internet Explorer: http://support.microsoft.com/kb/923737.

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2: Reset the Internet Protocol

  See the following site:

  How to reset the Protocol (TCP/IP) Internet: http://support.microsoft.com/kb/299357.

  Method 3: Reinstall the network card.

  a. click Start, type devmgmt.msc in the start search box, press ENTER.

  b. Select network adapters.

  c. right click on the device, then click on uninstall. Restart the computer.

  d. go back to Device Manager, select the Scan for hardware changes. The NIC will reinstall automatically.

  You can also check for the problems of network card:

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

  Hope that information helps. Keep us posted if you are having problems with windows in the future. We will be happy to help you.

• Minecraft fatal error has occurred (4): Connection Reset?

  When I start Minecraft, it starts to download the packages, then it stops just to the random % and never ends download.
  I've never had this problem before and I don't know what might be the causes as the only changes I made to my computer is a few games on Steam, I installed...
  After about 15 minutes, I get a message saying of Minecraft:
  Fatal error occurred (4): connection reset

  And this happenes, all, simple, time

  I have a 32-bit computer ADVENT laptop with Windows Vista?
  Thanks for reading! Help, please! :)

  Hi guy,

  Method 1
  If you encounter problem when installing the game, then I you suggests to disable all antivirus and then try to install the game.

  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.

  Method 2
  Perform the clean boot and then try to install the game.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  If you have any known issues with the game, then I suggest you to contact the game manufacturer.

• error while configuring nfs for unix or openfiler

  Hello

  I need NFS help set up for the test esx host.  I use openfiler nfs and windows to UNIX servers to install the nfs server, but without success.  I have the following errors. Error in the configuration of the host: NFS error: unable to mount filesystem: unable to connect to NFS server Note: I need to configure something special on the esx service console host?  I have already installed nfs components and mounts.

  Audits:

  I can ping my server nfs, listening on port 2049, enable the firewall client nfs on esx host

  Anyone know where the steps by steps to implement nfs or openfiler for nfs work of a to z.

  Thank you for helping

  You should check your settings of double and proceed again, enable NFSv3 with ESX 3.x is very simple. To install NFS using Windows Services for UNIX, follow these steps:

  On NFS Windows 2003 Server:

  1. download the component on microsoft.com

  2 copy the/etc/passwd and/etc/Group password of ESX 3.x folder c:\etc\ windows host.

  3. install on your windows 2003 server and choose the "custom" option and choose "User mapping Service" and point the to these 2 files in c:\etc\

  4. use Windows to Unix admin console add 'administrator' and 'root' and click 'apply '.

  5 create a share as 'd:\data\sharefolder' and click on the tab 'NFS Sharing' and pass 'read/write' option and allow root access.

  On ESX 3.5 hosts:

  1 turn on the firewall for the NFS client settings

  2 chkconfig nfs and portmap autostart level 235 as mentioned

  3. create the network porgroups as (SC, VMotion, Production, Test, iSCSI, NFS) make sure you use different subnet for NFS/iSCSI traffic.

  4. you can customize your files /etc/hosts.allow and /etc/hosts.deny to hold account access restrictions. for example (rw, async, no squash root)

  5 restart your NFS daemon.

  Notes:

  Allows you to add storage wizard NFS Client VI-> the server name or IP address (this is your nfs server) and (mount point) such as /sharefolder and give him a "(NFS LUN01) label something like that."

  Check your ID, permissions, and settings, and ping them test information.

  Nothing else I can think of at this point if its does not work. Everyone is welcome to jump in.

  Best luck!

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.

  What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  
  

• xw9400: xw9400. Pinout of the need for the connectors of the case (no psu connectors, only those in the case)

  I need the list of pins for various connectors case-Strip pin, especially J24 but other multispindle those too.

  Manual of Tyan S2915 Board for is a different version than that of poor quality that they OEM would be at HP for the 9400 and HP Tech Ref for the 9400 only provides pinouts for connectors well defined including pinout lie anywhere.

  The connector of the Panel before xw9400 J34 (there is no J24) pinout, the mother, is map:

  

  There are 2 key positions (lack of spindle) on pins 10 and 15.  Use these empty pins to help identify the signals.

  The pinout is very similar to other former workstations HP.  A few tips:

  -Pins 1 and 3 are for the harddrive activity led.

  -Terminals 2 and 4 are for the power light.  HP systems have back to back LED connected between these pins.  A green is on and functioning normal and red lights (and flashes error codes) when there are errors.

  -Connect a momentary between pins 5 and 6 switch will turn on the computer and off.

  -Connection of a momemtary between pins 7 and 8 switch will force a system reset.

  -PIN 9 is designated as + 5V, but it is powered by a 100 ohm pullup resistor to + 5V, so it will not provide a lot of power.  FOR INFO.

  -SPKR + and SPKR - are for the internal speaker.

  Most of the other connectors xw9400 follow standards of industry, i.e. the IDE drive and floppy connectors.

  Is there anything else you want to know?

• I can't connect to certain things (connection refused error)

  Hello

  recently I am experiencing an error where my mac does not connect to certain things, to make an example and explain

  -I can't open the web page of google

  -I can't open another page Web (connection refused error)

  -I can't open steam but downloads don't work and so used to the store

  I had this problem once before, but a call for assistance from apple and everything worked again.

  I would like to know what causes this problem and how to solve this problem, so I can't call assistance all the time

  Thank you

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  The first three are clearly not VSearch files because the names match either of the above models. The last two are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these legitimate files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• IOM 11 GR 2 UNIX connector make up inquiry UNIX users

  Nice day!
  
  I would like to ask if there is a way in IOM that when I reconcile all new users to my UNIX server, IOM will also create the resource that this user is provisioned on?
  
  Here is my scenario:
  
  1.) 11 GR 2 freshly installed IOM.
  2.) connector installed UNIX on OIM 11 GR 2.
  TRUSTED configured UNIX resource 3)
  4.) reconciled all users of UNIX in IOM. (New users are created from my IOM is a not any user)
  (5.) the problem is when new users are now created in IOM, they do not have rights or accounts related to the UNIX server which they were fired on.
  
  I would like to ask if I need to configure something to have possible linking rights/accounts?
  
  If not, what are the ways I can do this?
  
  The only way I can think of is have UNIX users created in a flat file first then load via BMS were then having IOM to these users a link to UNIX which I think should be able to do the screenplay, I ask for reconciliation.
  
  Thanks in advance!
  
  Kind regards
  Jeff

  You must first run the trust reconciliation against source target that will create the user to IOM. Once you reconciled all users of IOM, you can run all the recon target against source configured target which will create account to IOM and it will connect the user to the respective IOM

  If you have more than one target system. install all connectors and configure (ex: AD, OID... etc)

  To your question let me know the version of the Unix connector

• RH10: Test connection displays error: could not contact the site at the specified url.

  Hello

  I am using sharepoint as a control source code for my project. Here are the steps mentioned in the link of reference robohelp 10.

  • Configure RoboHelp for SharePoint settings
  • Configure the SharePoint document library settings
  • Add a project to a SharePoint document library

  Step 1 & 2 are completed successfully. But in step 3, when I add version control, an error message appears.

  File-> Version Control-> add to version control-> connector Sharepoint RoboHelp-> Ok-> enter Sharepoint site-> test the connection

  Error message: "test connection displays error: could not contact the site at the specified url.» There is no web named *. "/ _vti_bin/sites.asmx.

  Help, please.

  Hello

  Using SharePoint 2010? Earlier versions are not supported for version control.

  What is the URL that you use? You must point RH on the site or subsite holding library. Not the library itself.

  Take a bow

  Willam

• Flex/Zend Channel Connect failed error...

  Hi guys.

  I use Flex and php to develop my project. Everything works fine on my local machine. However, when I upload my files on my server (godaddy.com). I got the error when loading my flex application.

  The popup error message is

  Send failed

  Channel.Connect.failed.Error

  Netconnection.call.Badversion: url:

  http://mydomail/folder/gateway.php

  I send my ZendFramewrok folder on my server and amf_config.ini has been set up. (webroot = ) http://mydomain )

  I don't know what is happening here. Help, please. Thank you.

  Update: my gateway.php

  <?php
  ini_set("display_errors", 1);
  $dir = dirname(__FILE__);
  $webroot = $_SERVER['DOCUMENT_ROOT'];
  $configfile = "$dir/amf_config.ini";
  
  //default zend install directory
  $zenddir = $webroot. '/ZendFramework/library'; //I did upload the ZendFramwork folder
  
  //Load ini file and locate zend directory
  if(file_exists($configfile)) {
   $arr=parse_ini_file($configfile,true);
   if(isset($arr['zend']['webroot'])){
    $webroot = $arr['zend']['webroot'];
    $zenddir = $webroot. '/ZendFramework/library';
   }
   if(isset($arr['zend']['zend_path'])){
    $zenddir = $arr['zend']['zend_path'];
   }
  }
  
  
  // Setup include path
   //add zend directory to include path
  set_include_path(get_include_path().PATH_SEPARATOR.$zenddir);
  // Initialize Zend Framework loader
  require_once 'Zend/Loader/Autoloader.php';
  Zend_Loader_Autoloader::getInstance();
  // Load configuration
  $default_config = new Zend_Config(array("production" => false), true);
  $default_config->merge(new Zend_Config_Ini($configfile, 'zendamf'));
  $default_config->setReadOnly();
  $amf = $default_config->amf;
  
  // Store configuration in the registry
  Zend_Registry::set("amf-config", $amf);
  // Initialize AMF Server
  $server = new Zend_Amf_Server();
  $server->setProduction($amf->production);
  if(isset($amf->directories)) {
   $dirs = $amf->directories->toArray();
   foreach($dirs as $dir) {
       // get the first character of the path. 
       // If it does not start with slash then it implies that the path is relative to webroot. Else it will be treated as absolute path
       $length = strlen($dir);
       $firstChar = $dir;
       if($length >= 1)
        $firstChar = $dir[0];
  
       if($firstChar != "/"){
        // if the directory is ./ path then we add the webroot only.
        if($dir == "./"){       
         $server->addDirectory($webroot);
        }else{
         $tempPath = $webroot . "/" . $dir;
      $server->addDirectory($tempPath);
     }     
    }else{
        $server->addDirectory($dir);      
    }
   }
  }
  // Initialize introspector for non-production
  if(!$amf->production) {
   $server->setClass('Zend_Amf_Adobe_Introspector', '', array("config" => $default_config, "server" => $server));
   $server->setClass('Zend_Amf_Adobe_DbInspector', '', array("config" => $default_config, "server" => $server));
  }
  // Handle request
  echo $server->handle();
  

  Error in gateway.php if I call him directly.

  WARNING: require_once(Zend/Loader/Autoloader.php) [function.require - once]: failed to open stream: no such file or directory in /home/content/79/4687979/html/parkerList/gateway.php on line 27

  Fatal error: require_once() [function.require]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path ='.: / usr/local/php5/lib/php:http://blackwheels.info//ZendFramework/library"") in /home/content/79/4687979/html/parkerList/gateway.php on line 27

  Gateway.php is the rat. but I can't understand what is wrong. Zend/Loader/Autoloader.php is under the "ZendFramework/library" of server root folder. I don't understand why my application can't find it. Thanks again!

  Hello

  I had the same problem (I think). I have some sort of solution: not a very good, but at least it works (for me)...

  So, I put the ZendFramework directory in my application directory (this is why it is not a good solution...) and changed the layout of directories in amf_config.ini and gateway.php.

  (on my server: .../myFlexApp/ZendFramework)

  new file amf_config.ini:

  [zend]
  ; define the absolute path to the webroot directory, example:
  ; Windows: C:\apache\www
  ; MAC/UNIX: / user/apache/www
  Webroot =.

  ; define the absolute path to the zend installation directory, example:
  ; Windows: C:\apache\PHPFrameworks\ZendFramework\library
  ; MAC/UNIX: / user/apache/PHPFrameworks/ZendFramework/library
  zend_path = ./ZendFramework/library

  [zendamf]
  AMF.production = true
  AMF. Directories [] is. / services

  and at the beginning of the gateway.php file:

  ini_set ("display_errors", 1);
  $dir = '.';
  $webroot = $_SERVER ['DOCUMENT_ROOT'];
  $configfile = "amf_config.ini";

  By default zend installation directory
  $zenddir = $webroot. "/ ZendFramework/library";

  And for me it's OK.

  I will try to solve the problem in a more clean way later, with a repertoire ZendFramework separated from the application directory. Maybe someone else can help? With a few "echoes" in the gateway.php file, I was not able to understand what was wrong, I'm not familiar enough with the configuration of php.

  I hope this can help you!

• All of a sudden, after a update of firefox, I get "this connection is untrusted" for Facebook, no matter if I use http: or https:, WHY?

  All of a sudden, after a update of firefox, I get "this connection is untrusted" for Facebook, no matter if I use http: or https:, WHY? Here are all the details of the error message:

  This connection is Untrusted

  You asked Firefox to connect safely to facebook.com, but we cannot confirm that your connection is secure.

  Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
  What should I do?

  If you normally connect to this site without problems, this error can mean that someone is trying to impersonate the identity of the site, and you should not continue.

  This site uses HTTP Strict Transport Security (HST) to specify that Firefox didn't connect safely. As a result, it is not possible to add an exception for this certificate.

  Facebook.com uses an invalid security certificate.

  The certificate is not trusted because the issuer certificate is unknown.

  (Error code: sec_error_unknown_issuer)

  (Also included a screenshot).

  COR - el said

  You can check the date and time and time zone in the clock on your computer: (double) click on the clock icon in the Windows taskbar.

  • https://support.Mozilla.org/KB/secure+connection+failed

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page: "I understand the risks".
  • Let Firefox recover the certificate: "Add Exception"-> "get certificate".
  • Click on the button "View" and inspect the certificate and the Coachman, who is the issuer.

  You can see more details like the intermediate certificates that are used in the Details tab.

  If you cannot inspect the certificate by "I understand the risks", then try this:

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • Click on the "view..." button. "to inspect the certificate in the certificate display

  Check which is the issuer of the certificate.

  You can get more details like the certificate chain in the Details tab of the certificate display.

• Safari throws "Safari cannot open page because the server is not responding" error for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Can anyone help?

  Safari throws "Safari cannot open page because the server is not responding" while Chrome throws an error "this site is not reachable, connection timed out" for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Sometimes, however, I am able to get the site on Google and access one page other than the home page and everything on the site works fine afterwards. I use a Macbook Pro OS X El Capitan (10.11.5) running. Can anyone help?

  Test in safe mode, if it works back to the normal mode safe mode start-up to test again.

  Try safe mode if your Mac does not end commissioning - Apple Support

  Let us know if the problem occurs in mode without failure or even once after start in normal mode.

• Connection reset when HTTPS access through proxy

  Since upgrading to firefox 27 when you try to access https://www.birtles.org.uk , I get a reset of the connection or connection interrupted error. I connect through a proxy. 26 Firefox works fine.
  I tried on 3 different machines 2 windows and a Mac with the same results.

  This could be a problem with my employers proxy server, seems to work fine now

• M40-112-WLAN-connection-reset

  Hello

  I have problems with my M40-112 new for WLAN connections. From time to time the connection will be reset and connected again.

  Other users have the same problem. There is no reason to find it by the access point. My old toshiba with WLAN pcmcia has never had connection - reset and no other cell phones in our network don't have such a problem.

  There is no real driverdownloads...

  Help, please!

  Kind regards
  Frank Neitzel

  [Edited by: admin]

  Hello

  As you can see there are a lot of discussions on the Intel (r) PRO/Wireless 2200BG card. I found a very interesting discussion. Check it please on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4861.