An ESB Service for publication in the register of Service Oracle

Similar Questions

• What is the. BAR for publication? the one in the folder /Simulator/ or /Device/?

  Just got my problem fixed signature. And now, I want to know what is good. BAR the file that will be submitted to the AppWorld. Is - that of the folder of the device or in the Simulator? or both is ok? Thanks to the advanced guys.

  the in the folder of device is for publication.

  It is the only one that works on the device.

  One Simulator is for the Simulator only

• Continue button works only for publication in the swf format

  I created a quiz in Captivate and my options for success/failure in opening a URL on success.  I need to publish in flash (swf), but the button continue does not open the URL.  This works perfectly if I publish the file to .exe format.

  Here are my current settings (I traded my URL to the Web site of the BBC, while testing)

  

  I use version 5.5

  Can anyone help?

  Have you set up the location of publication record as a location approved in your Flash Global security settings?  Otherwise, Google for information on how to do it.  This is probably the reason why your link does not work.

• The initial index for CRS 11.2 fails: ' Could'nt find the component in the register case number.

  Hello

  I installed CRS 11.2 and started the full initial deployment. The end of it, ProductCatalogSimpleIndexingAdmin automatically starts a benchmark, as it should.

  However, this benchmark index fails with the following exception:

  12:47:49, 111 ERROR [nucleusNamespace.atg.commerce.endeca.index.ProductCatalogSimpleIndexingAdmin] (index - / atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin) null: java.lang.RuntimeException: java.io.IOException: could find the Instance of the component in the register number: http://localhost:8500 / StagingCRS-dimvals /? wsdl

  See the full exception stack trace below.

  When I manually trigger another Index from the base line, the result is the same. The call manually the URL indicated in the error message in a browser returns a page with a simple message "Not found service".

  I did all the CRS installation and repeatedly, installation to check if I missed a step, but with the same result.

  Here's the full stack:

  12:47:49, 111 ERROR [nucleusNamespace.atg.commerce.endeca.index.ProductCatalogSimpleIndexingAdmin] (index - / atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin) null: java.lang.RuntimeException: java.io.IOException: could find the Instance of the component in the register number: http://localhost:8500 / StagingCRS-dimvals /? wsdl

  at com.endeca.itl.service.ServiceLocator.getService(ServiceLocator.java:224)

  to atg.endeca.index.RecordStoreDocumentSubmitterSessionImpl. < init > (RecordStoreDocumentSubmitterSessionImpl.java:233)

  to atg.endeca.index.RecordStoreDocumentSubmitterSessionImpl. < init > (RecordStoreDocumentSubmitterSessionImpl.java:180)

  at atg.endeca.index.RecordStoreAggregateSessionImpl.createSession(RecordStoreAggregateSessionImpl.java:125)

  at atg.endeca.index.RecordStoreAggregateSessionImpl.createSession(RecordStoreAggregateSessionImpl.java:64)

  at atg.endeca.index.AbstractRecordStoreAggregateSession.getSessionForKey(AbstractRecordStoreAggregateSession.java:322) [_DAF. [Endeca.Index_slib_sclasses.jar:]

  at atg.endeca.index.AbstractRecordStoreAggregateSession.getSessionForContext(AbstractRecordStoreAggregateSession.java:284) [_DAF. [Endeca.Index_slib_sclasses.jar:]

  at atg.endeca.index.AbstractRecordStoreAggregateSession.getSessionForCurrentContext(AbstractRecordStoreAggregateSession.java:273) [_DAF. [Endeca.Index_slib_sclasses.jar:]

  at atg.endeca.index.AbstractRecordStoreAggregateSession.submitRecord(AbstractRecordStoreAggregateSession.java:362) [_DAF. [Endeca.Index_slib_sclasses.jar:]

  at atg.endeca.index.PerApplicationExporter.exportRecords(PerApplicationExporter.java:393) [_DAF. [Endeca.Index_slib_sclasses.jar:]

  to atg.endeca.index.PerApplicationExporter$ 1.performActionForApplication(PerApplicationExporter.java:287) [_DAF. [Endeca.Index_slib_sclasses.jar:]

  at atg.endeca.index.configuration.IndexingApplicationConfiguration.executeForEachApplication(IndexingApplicationConfiguration.java:456) [_DAF. [Endeca.Index_slib_sclasses.jar:]

  at atg.endeca.index.PerApplicationExporter.export(PerApplicationExporter.java:282) [_DAF. [Endeca.Index_slib_sclasses.jar:]

  at atg.endeca.index.PerApplicationExporter.performBaselineUpdate(PerApplicationExporter.java:479) [_DAF. [Endeca.Index_slib_sclasses.jar:]

  at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:445) [_DAF. [Endeca.Index_slib_sclasses.jar:]

  at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.java:388) [_DAF. [Endeca.Index_slib_sclasses.jar:]

  to atg.endeca.index.admin.IndexingPhase$ IndexingTaskJob.invoke (IndexingPhase.java:501) [_DAF. [Endeca.Index_slib_sclasses.jar:]

  at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherThread.java:178) [_DAS_slib_sclasses.jar:]

  Caused by: java.io.IOException: could find the Instance of the component in the register number: http://localhost:8500 / StagingCRS-dimvals /? wsdl

  at com.endeca.itl.util.UrlUtils.ping(UrlUtils.java:195)

  at com.endeca.itl.util.UrlUtils.ping(UrlUtils.java:147)

  at com.endeca.itl.service.ServiceLocator.getService(ServiceLocator.java:215)

  ... more than 17

  Thanks for any help,

  Andreas

  Thanks for the information, it looks like the EAC application name that was created and the name of the application SimpleIndexAdmin trying to talk are different.

  initialize_services.sh created dimval record store with the name of CRS-dimvals however your application tries to talk to StagingCRS-dimvals. EHR you can correct the short Atg configs application name, or you can create another application with the name StagingCRS

  Thank you very much

  Vaibhav

• Creation of ESB service for a pre-defined wsdl file

  I was provided with a wsdl file that is predefined for an interface of our society to one of our partners.
  
  This language wsdl based defines the types of message the port types soap bindings, the details of the service:
  
  I need to create a service of BSE that is behind this wsdl file.
  
  I tried to create an ESB based on the existing service, but when the BSE serivce is deployed, it uses a different wsdl definition and a name. I think I may be missing something and I was wondering if someone could possible give me some advice.
  
  To give a bit more information wsdl files can be exposed in a service registry due to the nature of the data being sure, and I noticed that when the wsdl file has been provided in the definition of service location of address: soap has been set to http://set.by.provider. Does that mean I should replace this text with the wsdl again I HAV created a problem of this file wsdl to them?
  
  Hopefull ysomeone can help.

  I think that the WSDL has been provided for use by the BSE SOAP adapter. You can then set the location property of the WSDL or in the .esbsvc file created in the esb console itself after deployment.

  We always have a router in front of the SOAP adapter Service because we use capablity transformation of the Routing Service and then pass this application transformed to the SOAP adapter. There is nothing that prevents you from simply deploy the SOAP adapter by itself.

• Finally, mite update frm FF 3.6 at 14 for html5 (on the work of google last updated frm 3 to 5 services dint). will be history, bookmarks, site prefs etc be preserved?

  Finally, mite update frm FF 3.6 at 14 for html5 (on the work of google last updated frm 3 to 5 services dint). will be history, bookmarks, site prefs etc be preserved? probably used to active connections. extension & plugin compatibility is not really important.

  also, so simply, I hit update and do, will that opera-like "Firefox" menu appear or I have to do a clean install to get it?

  If you do the update of in Firefox bookmarks, preferences, history, etc. will be there. Active connections should work for most as well. The majority of your extensions and the plugin should work as well, but you may need to update after the update of Firefox.

  On Windows XP the menu Firefox is not by default, but if you want you can always enable it by going to view > toolbars and unchecking the menu bar

• How can I print shares on the register of accounts for Microsoft Money 2004 please?

  I am using Microsoft Money 2004

  Can you pls tell me how to print the splits when printing on the register in the accounts there is no option for this

  Thank you

  Hello jenniferbovard,

  There is a separate forum that is specifically due to Microsoft Money.
  Click below for the link to the forum.
  http://social.Microsoft.com/forums/en/money/threads

  They will be better able to solve your problems with Microsoft Money.

  Sincerely,

• Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  Original title: Windows Update

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

• Cannot install Windows update, the error message "" Windows update canoe currently check for updates, because the service is not running ".

  Initial version of updated title: windows

  My "Windows update" is not updated. The problem started recently and its shows the error message "Windows update canoe currently check for updates, because the service is not running. You may have to restart your computer "." I tried it with several reboots, but there still is not up to date. Kindly help.

  Hello

  Have you made changes on the computer before this problem?

  Method 1:

   

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Try the procedure described in the following article and check the status of the issue.

  http://support.Microsoft.com/kb/822798

  Restart the computer and check it please for windows update.

  Hope the above information is helpful.

• Can't get updates for Windows, "Windows Update cannot currently check for updates, because the service is not running." You may need. "" Restart your computer.

  When I try to install the updates I receive the message "Windows Update cannot currently check for updates, because the service is not running."  You may need. "" Restart your computer,   It does not also. check me the update history

  Hello

  1. you made any hardware or software changes the computer recently?

  2. What is the number of update?

  3. do you get this message for all the updates?

  Follow these methods and check if that helps:

  Method 1:

  Step 1.

  Unplug all external devices, restart the computer, and then try to install updates.

  Step 2:

  I suggest that you follow the steps mentioned and try to start the Windows update service.

  Check if the following services are running.

  (a) Background Intelligent Transfer Service

  (b) cryptographic Service

  (c) Windows Update

  (d) Windows Installer

  a. Click Start, type "services.msc" (without the quotes) and press ENTER.

  b. double-click the service name in the Services list.

  c. under the general tab, next to startup type, make sure that automatic is selected.

  d. If the service is not already running, under Service status, click Start and then click OK.

  e. once the services are started and defined as running, try to install the updates and check.

  Method 2.

  You can follow the steps in this article: http://support.microsoft.com/kb/2509997

  Warning check disk.

  Important: All by performing the check disk on the hard drive if bad sectors are found then check disk try to repair this area, all available data on this sector can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  See also: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• "The Windows Update cannot currently Check For Updates, because the Service is not running. You may have to restart your computer.

  Unlike before, I can't launch the Windows automatic update service now, I suspect that my computer is infected virus, I just install demo version free of McAfee internet security and run a full scan, no infection has been detected.

  Description:

  When I click on Windows update for all programs at startup, pop out window update, and then I click on "check update", out another part: list "" Windows Update cannot currently Check For Updates, because the Service is not running. "You may need to restart your calculater ', then I restart the computer a few times, the same problem still persists. before I was using microsoft essential secruty with no problems, but now I can't seem to complete the definition of update, so I think this problem could be related to Windows Update and decide to uninstall MSE and replace it with McAfee, but it does not work.

  any help and suggestions would be very appreciated.

  Hello

  Steps 2 to 6 to identify the program that is causing the problem if the clean boot solves the problem.

  Try the procedure described in the following article to improve your computer's performance.

  Optimize Windows 7 for better performance.

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Ways to improve your computer's performance.

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

• After installing Windows 7 using MDT, Windows displays the message "Windows Update cannot currently check for updates because the service is not running.

  Hi all

  I worked on creating a better system for my business get an OS up-to-date with all the required software, settings, and drivers. I have previously using WDS as autonomous and just syspreping images and pushing them up until he became incoherent and corrupting of the parts of the image. I did a little surfing on the web and discovered that many computing professionals use MDT to produce images of quality with all the customization they need. So that's the problem.

  The image works fine. I'm able to customize the way in which I need to and get most of my successful deployed pilots (problem with trackpad drivers), but the error message I get when I try to run a windows update is "windows that update cannot currently check for updates because the service is not running." After I received this message I check my services and it shows the update of Windows running service and long-term as well running services. Tried to restart as suggested and still no results. Undertook research for a possible fix and still nothing.

  Any help?

  It became quite a headache for me. Thank you guys

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the installation of Windows Update.

  If you your computer are connected to a domain network?

  If Yes, then post your query in TechNet forums because they have more expertise in this issue to help you better. Please follow the below link to do the same.

  T echNet Forums for Windows 7 
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• By RegitryKit told me that I have problems with my 1400 register. I can't find anything in my Windows 7 for the book Dummies on the maintenance of the register. Help, please.

  How to deal with registry issues?

  Thank you

  Registry errors are usually little or no difference in performance of your computer. However big cleaning the registry can cause your computer problems including programs doesn't work don't not or the computer does nothing. Registry cleaners don't consider as a panacea for your computer problems.

  In Windows 7, there is no need to worry about maintenance of the register. Leave it alone. If you have a specific problem, search for an answer specified . People in these forums will be happy to help you.

• "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  This appears when I try to connect with Microsoft Account.

  I tried all the possibilities that was displayed in the link but when even the problem exists... below you please suggest me the solution to add the microsoft account

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/sorry-we-couldn

  Hi Nikhil,

  If you connect through a proxy, then I suggest you to try the steps suggested in this article and checking:

  http://support.Microsoft.com/kb/2778122/en-us

  Keep us updated on the results.

• I paid for my series/product number code, he entered through the service for verification of the adobe product and my eligibility to audit has been approved. Now my Adobe Photoshop and first 14 elements will not be displayed on my Adobe account.

  I paid for my series/product number code, he entered through the service for verification of the adobe product and my eligibility to audit has been approved. Now my Adobe Photoshop and first 14 elements will not be displayed on my Adobe account.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".