An extension with several panels

Similar Questions

• How to change the extensions on several files with Windows 7?

  * Original title: Extentions

  How to change the extensions on several files with Windows 7?

  You hear no doubt, is that your movie software will only recognize certain types of image file formats.  If this is the case, you will need to reformat format files to any format PNG is recognizable by the software.

  Rather than we guess, please identify your «film» software

  Download and install IrfanView, which is a free utility for images.  http://www.IrfanView.com/

  IrfanView has the ability to read a great many formats of image files.  It can also convert image files formats.  And even better - for you - it can do all these things on a batch of files.

  As test, after I installed IrfanView, open one of your PNG files.  Now click on file > save as, and select the 'Save as Type' to be little matter the file type of your movie software will accept.  Save the file.  Make sure your movie software can accept the new file.

  Once you are convinced that you can modify files that you have in a format that you can use, use IrfanView

  File > Batch Conversion/Rename command.  If necessary, see IrfanView help on this topic.

• several panels, only close reminder?

  Basic question.  I am using a button leave common through several panels in my project.  So with a single callback function, I have a couple nested switch statements, the first of course check out of EVENT_COMMIT and other down looking for the active panel.  For example:

     switch (panel)         // TODO: this isn't working. panel variable doesn't seem to be changing
           {
              case AUTOPANEL:
              printf("AUTOPANEL");
              HidePanel(autopanel);
                      DisplayPanel(frontpanel);
                      break;
              case MANPANEL:
              printf("MANPANEL");
              HidePanel(manualpanel);
                      DisplayPanel(frontpanel);
                      break;
              case PASSPANEL:
              printf("PASSPANEL");
              HidePanel(passpanel);
                      DisplayPanel(frontpanel);
                      break;
                  case FRONTPANEL:
              printf("FRONTPANEL");
              QuitUserInterface(0);
                      break;
              }
  

  However, when I do that, I get very unpredictable behavior.  It would appear that the switch on the Panel is not what, in my view, that it should be in the callback.  The value of the Group seems not to match the value of the macro for the respective panels that I when I click on their buttons QUIT.

  Just to add some details to the answer of Wolfgang, consider that you can load the Panel even more than once, and each instance of the latter will have an independent life!

  Situation is as follows:

  • Whenever you load a Panel, you use the ID of the resource with the file name; as you noted, resource Panel ID are unique in the same UIR file, so the file name + resource ID symbolizes a single object.
  • When you actually load the Panel, LoadPanel returns a handle to the Panel, which, in turn, he identifies among the panels in memory; If you load the Panel once, the handle will be different. The system ensures that the Panel handles are unique in the application, so that each of them identifies a unique object. With the help of the handle Panel to manipulate the Panel itself or controls on that allows you to distinguish between all the existing objects that accurate that you are interesting in even if you have previously loaded several instances of it
  • When you talk to a control on a Panel, you use the ID of control with the handle of the Panel; the resource ID are unique in the same panel, new Panel manage + control ID identifies a unique object of all those in memory

• ASA EzVPN with several remote subnets

  Hello world

  I'll have the challenge of EasyVPN installation based on ASA 5520, and ASA 5505 (with the ASA5505 as the vpnclient) with several networks behind the ASA 5505.

  Access by the network directly connected on the 5505 to the central site works very well.

  But the second network segment (which is behind a router on the directly connected network) cannot connect to the central site.

  I guess I need to specify that some sort of acl's to be able to do that.

  BTW we do not use tunneling split, because all traffic moves through the tunnel (no local internet access).

  The layout looks like this

  (--LAN--)-5520---5505-(--LAN1--)-ROUTER-(--LAN2--)-(WAN)-

  LAN1 and LAN connection works great through the EZVPN Tunnel.

  LAN2 connection to the LAN does not work through the Tunnel of EZVPN.

  Here is the configuration used so far (outside the normal SHEEP, groups of objects and stuff ISAKMP crypto):

  Client:

  vpnclient Server 10.x.x.x

  extension-mode network mode vpnclient

  EzVPN vpngroup vpnclient password *.

  vpnclient username user1 password *.

  vpnclient enable

  Crypto ipsec df - bit clear-df outdoors

  Server:

  internal EzVPN group strategy

  Group Policy attributes EzVPN

  allow to NEM

  allow password-storage

  tunnel-group EzVPN type ipsec-ra

  General characteristics of tunnel-group EzVPN

  Group Policy - by default-EzVPN

  IPSec-attributes tunnel-group EzVPN

  pre-shared key *.

  user user1 password *.

  I hope you can help

  Best regards

  Jarle

  Unfortunately, it is not supported on the platform of the SAA. With EasyVPN on the SAA, only the connected networks can be advertised. To accomplish what you want to do, you need to configure a static IPSec tunnel and announce local networks via ACL interesting traffic. You can also use an IOS device that does not have the capabilities of "multiple subnet" with EasyVPN.

  http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_easy_vpn_rem.html#wp1098057

• Creating a DVD with several file format of files/best project for export (PE13)

  Hello! I first 13 (just improved 10) elements and trying to figure out the best way to save my movie on DVD. There are at least two different project files (the film, shock and eventually a video "making of") that I want to put on the same DVD with a menu. A couple of years, trying to do this with first Elements 10, I could not get it to work and had to use a separate DVD menu software. I can do that again, if I need to, but the software I used was lost, so I thought I would check to see if it can be done first before going to buy it again.

  If I can't do it in first, I need advice on the best format to save project files to burn to DVD later. I'm a novice, and most of these sizes looks like gibberish to me! I had problems in the past (a few years ago) with a black border appears around the film, after he was saved, reducing the size of the movie, and I'm hoping to avoid that...

  The film is about 1 1/2 hrs long

  The blooper reel is about 17 minutes

  If there is more info to help answer my questions I'll be happy to find it!

  alsyarn

  Thank you for the important information for troubleshooting your Premiere Elements burn on DVD-VIDEO to DVD disc so that it presents throughout without black borders.

  Open the first elements 13/13.1 to his Expert workspace, go to file Menu/New/Project and set the project preset manually to

  NTSC

  DV widescreen

  Do follow the following order

  • Open the project in the workspace Expert and go to file menu/new project and change the settings.
  • In the settings, set the project preset to NTSC/DV widescreen. OK to get out of there.
  • In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.
  • In the Expert workspace, import your media source by using Add Media / choice.

  Import your Source 3 (720 x 480 widescreen display 16:9) - which should occupy all the space area monitor Edit which is a space of DV widescreen size.

  Import your Source 1 (1920 x 1080 16:9)-that must fill the space of the monitor Edit once the scale is automatically just to fill the space of the Edit monitor.

  Import your Source 2 (720 x 480 which is what is because it has a format of 1.0 pixels)-that does not fit properly. Balance this video in Edit area monitor to enter space monitor without black borders.

  It is unclear why the project 720 p settings have been set for this instead of NTSC DV widescreen. But please implement your project as described above, then export as suggested.

  I have suggested above based on destination DVD VIDEO to DVD disc. When you have a montage with several formats, you set an adjustment everything with scaling in the monitor area space Edit put in place by the predefined project and major. General guideline - the project preset should correspond to the properties of the media source... and with more than one type of format, you define major and if adapt everything with scaling if you don't want black borders.

  Another tip... When you want to scale width and height separately in edit box monitor, first go to applied effects tab/Applied effects Palette/panel of the selected clip expanded Motion and remove the box keep the Proportions.

  Please consider. And then we'll try to condense all that into a workflow that will work for you.

  Thank you.

  RTA

• I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the doc

  I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the document (replacing the existing document) and close. Then another person can open the same document digitally sign another area of the form, save it, and close it. So on, and so on. Is there a way to do this? At the end of the day, I would end up with a PDF file with literally hundreds of signatures to enable different ACC everywhere...

  I don't understand what the problem is. In the post of the davidr96549424 on May 8, 2015 07:58 you presented a structure of a correct document. Is the issue of the creation of this structure in a PDF file? For this, you will need an Acrobat, not reader.

  XI in Acrobat, select Tools-> forms-Edit. Click 'No' on the form fields 'detect '. In the tasks Panel that opens, click on "add new field". Select "Digital Signature" and move it to the location in the document where you want to than the appearance of the signature to be. Repeat that for signature fields as you want. Users will sign by clicking on the prepared unsigned signature field which shows the dialog box "sign. Do not forget that as TSN has noted that a digital signature applies to the entire document. The entry in the document where it is is irrelevant. Each next signature covers all previous signatures.

  Your users can also sign a document from anywhere that they want without signature fields already prepared. For this select fill & sign-> work with certificates and the type of signing you want to sign up with. A dialog box that will tell you a rectangle for the appearance of signature rises and after you draw the rectangle of the dialog 'Sign' rises.

  PDF/Acrobat doesn't have a limit on a number of signatures in a PDF document. But! Don't forget that when you open a PDF file with Acrobat/Reader signatures valid all of them and takes time (several seconds - until 10 - for every signature), so if you have several signatures of dozens of their validation open can take a long time.

  I don't know how build you your workflow so that each person signs the same PDF and saves it. Economy runs on the same computer where the PDF is stored. You'll have to decide how to allow different people to have access to the same PDF. They, of course, you may sign this only one-at-a-time PDF.

• Import Illustrator file with several layers and sublayers as composition by keeping all layers and sous-calques

  I drew a map of the country with several layers and sous-calques, including the streets, cities, railroads...

  Now, I want to create a template for my colleagues in After Effects.

  To do this, I want to import the AI in After Effects, holding all sublayers and layers in compositions and subcompositions.

  When I do, I get the first two layers correctly, others just in a merged publication.

  What can I do to get all the layers of each as a layer in After Effects?

  Best regards, Raphael

  Illustrator imports only the first level of the layers. If you have groups or paths below you must release layer groups. The layers will then be stacked in the order in the form of layers. Then you need to move them to the top.

  The procedure is to select a layer in the layer Illustrator Panel, then without selecting any which specific element in the layer click on the menu in the upper right corner and select release to layers. All an elements in this layer will be transformed into layers. Now, select all, and drag them to the top above the original layer. This will leave the empty original layer and put all the elements in new layers.

  Here is a tutorial I made there are a bunch of years and who uses this technique to transform a mixture in a morphing.

  Morphing with Adobe Illustrator. I hope this helps.

• Selection of tracks with several traces

  What is the proper technique to select the paths with several lines of the same color?

  Select that even seems to not work properly because it selects just one stroke color.

  I have multiple paths with the same composition of color STROKE, but they do not behave as if they have the same appearance, in function of a path several traits is selected in the appearance Panel.

  magic wand perhaps options?

• Shortcut for the new window with several tabs

  Is it possible to have a shortcut on the desktop to launch a new window with several tabs? For example - home page is set to "www.google.com", but the shortcut opens new window with tabs "www.cnn.com" and "www.youtube.com".

  Then far,.../firefox.exe-nouveau-fenetre followed by the two URL in quotes will open two new windows. Entry - new-window "www.cnn.com" - new-tab 'www.youtube.com' will open two new windows if no instance of firefox is open, but if another window is already open, youtube will add a tab to the already open window, rather than the new window with cnn.com

  In reply to myself... withdrawal-order new window (and-new-tab), now it works.

  Looks like I'm too complicated it.

  shortened final was "C:\Program Files (x 86) \Mozilla ' 'url1'"url2.

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• Background with several pictures

  How can I create a wallpaper for my iPad, iPhone, MacBook Air with multiple photos?

  (El Capitan, iOS 9.2.1 Photos)

  To create a collage of photos, you can create a photo book project and select a template page with several photos. Fill it with photos of your choice and print the page in PDF format.

  The themes of the book are different according to the terms of the photos and the number of photos per page.

  It's the theme travel plans:

  

  If you have installed iWork apps try Keynote to create a slide with many photos, arranged freely.

• WiFi HP ENVY 4500 with several Access Points - same SSIS Configuration

  Hello

  We just got a HP ENVY 4500.  I have a main homenetwork with a wifi Modem/Router and an old router acting as an Access Point to the floor to extend coverage.

  Both have the same SSID and password and are set to different channels.

  My HP ENVY 4500 fails to connect when the Access Point is lit.

  It will connect with it.

  Once connected, I can turn on the PA and all is well.

  The two router an AP using WPA-PSK/WPA2-PSK encriptación

  The router (that it connects to) should have a better sgnal when both are on, so I do not understand why they need the AP to be turned off to connect.

  Any thoughts people?

  Eserim

  I think he has always had problems with several access points.  Try this, what ever AP is closest to the printer, set it to channel 1.  Then try channel 11.  Try now.

• Carpet * a DVD-Ram UJ - 841S comes with several error messages

  My laptop is relatively new, I've been burning some video files in DVD - RW and all of a sudden my DVD drive has stopped working. It came with several error messages format "failed due to damage media", "format failed due to general failure" and "the inserted disc is READ only".

  I also can't rip music discs.

  Can you see ODD listed in Device Manager, and if so what is the exact status it?

  Sorry, but we discus on ODD, but nobody knows what model of laptop you have and what is the history of this problem. Is replaced the drive? Why are you sure that you are using compatible with your laptop ODD.

  Please more information!

• Interfacing with several unknown USB devices; all producing NMEA strings

  Hi all

  Question about the peripheral USB interface and their associated drivers.

  I have the obligation to build an application that interacts with the USB devices that produce NMEA strings. I have the library to parse NMEA strings, but I fight with interfacing with several unknown USB devices. When deploying applications, I know not all possible USB devices to use.

  Is it possible to produce one driver who will accept any USB device strings?

  Or, more likely, is there a way to get the LV to recognize a connected USB device and automatically find / install the driver like windows does and is it possible to do in a deployed application?

  I had a trawl of the forums, but I've not found anything that specific.

  Thanks, I really appreciate the help.

  About the VI "set up the serial port", my problem is that the choice of COM port is in a separate menu (not directly related to the VI) and it allows all possible COM ports to be selected. That can be addressed.

  I am not expecting an all-in-one solution but asked the question in case it was possible.

  What I realized, is that for my specific condition to read strings from a USB device. It is likely to be sent over a serial connection. LV can handle this well and easily assuming the device has the installed driver / settings are available.

  LV (and indeed any other program) will not work without a device driver / settings. In this case, parameters set must be found (error) / a USB RAW driver would need to be developed. Devices requirng a RAW USB driver would need a serious review to continue due to the time and effort required. All this effort is work inherited from the AIDS to navigation

  I appreciate any help and I think I got the answer I was looking for! Thank you very much

• Closure of a state machine in queue event with several parallel loops

  I am trying to find the best way to stop a program that consists of an architecture of State machine in line waiting for event with several parallel loops. Can anyone recommend the best way to achieve this in my attached VI? (To browse the forum, this seems to be a frequently asked question, but I have not found a solution that works for me.)

  I look forward to any comments on my as well code, if someone is willing to offer it.

  My program needs:

  If the user press the 'Stop' button, the program should prompt the user with "are you sure you want to stop the program?" and then return to a State of rest or move forward to stop the program. In addition if there is an error, the program should prompt the user to ' clear the error and continue, or stop the program. Then back to the idle state or move forward to stop the program.

  Architectural details:

  The program consists of 3 parallel loops: (1) a loop of event management that places different States of a queue of the State, (2) a State Machine that enters the State that is removed from the queue of the State and (3) a loop error/Shutdown, which deals with errors in the error queue management.

  During normal shutdown, where running handling loop in the case of event 'Program.Shutdown' and 'Shutdown' and the 'Idle' States are added to the queue of the State. In the state machine, the State of 'Stop' is invoked. Special "5000" error code is added to the queue of the error. In the loop of error handling and stopping, "5000" error triggered a prompt that asks the user if they want to stop the program. If the user chooses not to stop, a notifier StopNotif is sent to the State of 'Stop' and 'Program.Shutdown' event case with notification 'Go '. If the user decides to stop, the Notifier sends the notification "Stop". Loop and event management State Machine ends when they receive the notification "Stop".

  In case of error, the program behaves in the same way: If the user chooses to clear the error and continue, the program returns to the status "pending".

  HOWEVER - if the user chooses to stop the program, the program crashes. The author of the notification that is sent to stop the loop of events and State Machine management cannot be read because event Program.Shutdown and the stop State (which contain the function "Waiting to notify") are not active.

  I was able to activate the stop State by Queuing in the loop of error/Shutdown management. But I don't know how to activate the "Program.Shutdown" event by program and thus access the function "Waiting to notify" inside.

  I tried to put the function "Waiting to notify" outside the structure of the event, so the event-handling loop never ends. Placing timeouts on the "wait for declaring" and the structure of the event makes the programme of work, but I want to avoid using timeouts because I don't want to turn my event program into a program of polling stations. I would also avoid using variables or nodes property to stop loops, because that requires the creation of a control/indicator for something that the user does not need to interact with.

  Thank you!

  First of all, close the notifier outside loops with your queues.  Second, you must use a user event to send the message to the event structure loop so that it stop in the case of the stop on an error.