Selection of tracks with several traces

Similar Questions

• How to add several tracks with offset path?

  Hello

  I would like to create a script that can create multiple strokes with offset path (incremental or material (user will enter value))

  Is it possible to add several traces? I have found no examples in the script reference or elsewhere.

  Note: Mixtures does not give exactly the same results because sometimes especially when you are dealing with fonts outline paths is to be wrongly mixed a way.

  I'd be happy if someone give at least the main command loop.  I'll try to rest and will share here because I find the solution.

  Thank you

  Best regards.

  

  OK, I'm going to assume your sub windows through the capture in the opening screen post.

  This is a completely different approach.

  This example uses executeMenuCommand so is only compatible with CS6 +.

  and Windows is only used from VB

  //-------------------------------------------------------------------
  
  // Offset Path in apperence panel
  
  // Script by Qwertyfly
  // contact [email protected]
  // version 0.1 beta
  
  //-------------------------------------------------------------------
  
  //number of offset paths
  var Qty = 5;
  
  //amount to offset
  var Offset = -5;
  
  //units to offest in
  var Unit = "px"; 
  
  //time to wait in milliseconds before sending keys.
  // more time is slower but more stable
  // I was able to run this with it set to 0, but a little bit of a pause is a good idea.
  var wait = 10;
  
  //-------------------------------------------------------------------
  function FillDialog_Windows(distance){
      var VB = [
          'WScript.Sleep ' + wait + '',
          'Set WshShell = WScript.CreateObject("WScript.Shell")',
          'WshShell.SendKeys "' + distance + '"',
          'WshShell.SendKeys "{ENTER}"'
          ].join('\n');
      var VBgo = new File('~/go.vbs');
      VBgo.open('w');
      VBgo.write(VB);
      VBgo.close();
      VBgo.execute();
  }
  function MakeStroke(offset){
      app.executeMenuCommand('Adobe New Stroke Shortcut');
      FillDialog_Windows(offset);
      app.executeMenuCommand('Live Offset Path');
  }
  
  for(var i = 1; i		   

• Export 6 channel discreet mono tracks (5.1 mix) I have only 2 tracks with audio compressed and 4 empty trace on my exit.

  Export 6 channel discreet mono tracks (5.1 mix) I have only 2 tracks with audio compressed and 4 empty trace on my exit. I use first Pro CC14, pasted below export settings and sequence settings.  Please help export feature for iTunes version trailer next week.  Ouch!

  

  So, I'm bad to think 5.1 sequence option is what you wanted. I'm sorry. You want to separate the 6 channels. Then with your initial configuration, your Audio Track mixing table appears as the posted screenshot?

  

• I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. How can I fix?

  I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. Can I fix?

  I am fairly new to this, but I think it has to do with the way you have drop them downs named. Copy you a then keep stick in each area? If so, that's the problem. You must rename each with a different number: Dropdown1, Dropdown2, etc. I think this might solve the problem.

• How to cut audio tracks with tool blade?

  Hello

  I recently made the switch from fcp7 to fcpx and I'm having a real hard time! There are many things that I can't understand how to do, and it's just one of them:

  Solo Cup audio tracks with the blade tool (or another medium, if there is). Can I cut the audio clips on one side, but how I cut a piece in the middle of the clip?

  Thank you!

  YYou can't cut with the blade tool? Or select it, and press Cmd - B of type point skimmer/reading

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• Background with several pictures

  How can I create a wallpaper for my iPad, iPhone, MacBook Air with multiple photos?

  (El Capitan, iOS 9.2.1 Photos)

  To create a collage of photos, you can create a photo book project and select a template page with several photos. Fill it with photos of your choice and print the page in PDF format.

  The themes of the book are different according to the terms of the photos and the number of photos per page.

  It's the theme travel plans:

  

  If you have installed iWork apps try Keynote to create a slide with many photos, arranged freely.

• Interfacing with several unknown USB devices; all producing NMEA strings

  Hi all

  Question about the peripheral USB interface and their associated drivers.

  I have the obligation to build an application that interacts with the USB devices that produce NMEA strings. I have the library to parse NMEA strings, but I fight with interfacing with several unknown USB devices. When deploying applications, I know not all possible USB devices to use.

  Is it possible to produce one driver who will accept any USB device strings?

  Or, more likely, is there a way to get the LV to recognize a connected USB device and automatically find / install the driver like windows does and is it possible to do in a deployed application?

  I had a trawl of the forums, but I've not found anything that specific.

  Thanks, I really appreciate the help.

  About the VI "set up the serial port", my problem is that the choice of COM port is in a separate menu (not directly related to the VI) and it allows all possible COM ports to be selected. That can be addressed.

  I am not expecting an all-in-one solution but asked the question in case it was possible.

  What I realized, is that for my specific condition to read strings from a USB device. It is likely to be sent over a serial connection. LV can handle this well and easily assuming the device has the installed driver / settings are available.

  LV (and indeed any other program) will not work without a device driver / settings. In this case, parameters set must be found (error) / a USB RAW driver would need to be developed. Devices requirng a RAW USB driver would need a serious review to continue due to the time and effort required. All this effort is work inherited from the AIDS to navigation

  I appreciate any help and I think I got the answer I was looking for! Thank you very much

• SA520W VPN from Site to Site with several VLANs

  Hello

  I have a customer here with several VLANS in their places who wants to set up a VPN from Site to site between 2 devices SA520W. Unfortunately I can not find a way to set it up. In the VPN policy, I can choose between everything (which is not what I want, I want only traffict between subnets the routed via VPN), IP address unique, a beach (in a subnet) and a subnet itself - but only one. I don't find a way to configure several subnets in the selection of local traffic and remotely. Adding another IKE policy between the 2 sites does not either (which is good normally).

  Any ideas? Anything I'm doing wrong?

  Thank you for your help.

  Best regards

  Thomas

  I know that if you have an ASA or a router, you can define as VLANS to pass through the tunnel.

  Do not have access to a SA520W to test...

  A recommendation might be to post the question on the SMB community where they answered questions related to this product, just to check what other people did.

  Federico.

• This is how a SELECT query fails with ORA-1555 occur?

  11 GR 2/RHEL 6.2

  I would like to know exactly how a SQL fails with error ORA-1555.

  Please take a look at the following simple example.

  INVENTORY_DETAIL is a table that stores information about items in a store.

  For this DB UNDO_RETENTION is set to 3 600 (1 hour) and TUNED_UNDO_RETENTION Meanwhile 5400 (1.5 hours)

  At 15:00, there's 12 Logitek involved in inventory.

  ITEM_ID NOM_ELEMENT STOCK_LEFT

  --------- -------------------- ----------

  8432 LOGITEK 12 SPEAKER

  At 15:00 Session1, starts a SELECT large with several tables joins query. Something like

  Select id.item_id, id.item_name, su.supplier_price, su.supplier_code

  Su.batch_code...
  

  of INVENTORY_DETAIL id join in-house suppliers knew on (id.supplier_id = su.supplier_id)

  ...

  ..

  03:02, Session1 reads the block that stores the line with item_id = 8432 and learns that he has 12 Logitek left speakers.

  15:10, Session2 delivers the next UPDATE and he agrees immediately.

  Update inventory_detail set stock_left = 7 where item_id = 8432;

  commit;

  The UNDO data for Session2 transaction are stored in the measure of cancellation remaining, and the UNDO data gets debusquees at 04:40 when the TUNED_UNDO_RETENTION of 1.5 hours is crossed at 16:40.

  Because of the bad of e/s, query SELECT of Session1 manages to retrieve all the records only from 17:00.

  But session1 notice this line with item_id = 8432 changed. Now, there's only 7 Logitek speakers which is inconsistent with what he learned at 15:02 (who was then at 12). Because of this incompatibility SO not able to recover data UNDO on this gap, ORA-1555 is thrown. My assumptions are good?

  3:10PM                             4:10PM                          4:40PM                       5:00PM

  |===================================|-------------------------------|-----------------------------|

  UNDO_RETENTION = 1 HR retention Undo Tuned = 1.5 h finishes of request for enforcement

  Martin, you asked, "are the correct on the circumstances that led to ORA-1555 my explanations?  The answer is no.  Oracle does not notice at the end of the query that changed a line he read.  Instead, each read line is at the same point in time.  When Oracle sees that a row has changed Oracle reads the UNDO segments to find the version of the data corresponding to the query start time.  If these data cannot be found the ORA-01555 error is raised.

  - -

  HTH - Mark D Powell.

• Creating a DVD with several file format of files/best project for export (PE13)

  Hello! I first 13 (just improved 10) elements and trying to figure out the best way to save my movie on DVD. There are at least two different project files (the film, shock and eventually a video "making of") that I want to put on the same DVD with a menu. A couple of years, trying to do this with first Elements 10, I could not get it to work and had to use a separate DVD menu software. I can do that again, if I need to, but the software I used was lost, so I thought I would check to see if it can be done first before going to buy it again.

  If I can't do it in first, I need advice on the best format to save project files to burn to DVD later. I'm a novice, and most of these sizes looks like gibberish to me! I had problems in the past (a few years ago) with a black border appears around the film, after he was saved, reducing the size of the movie, and I'm hoping to avoid that...

  The film is about 1 1/2 hrs long

  The blooper reel is about 17 minutes

  If there is more info to help answer my questions I'll be happy to find it!

  alsyarn

  Thank you for the important information for troubleshooting your Premiere Elements burn on DVD-VIDEO to DVD disc so that it presents throughout without black borders.

  Open the first elements 13/13.1 to his Expert workspace, go to file Menu/New/Project and set the project preset manually to

  NTSC

  DV widescreen

  Do follow the following order

  • Open the project in the workspace Expert and go to file menu/new project and change the settings.
  • In the settings, set the project preset to NTSC/DV widescreen. OK to get out of there.
  • In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.
  • In the Expert workspace, import your media source by using Add Media / choice.

  Import your Source 3 (720 x 480 widescreen display 16:9) - which should occupy all the space area monitor Edit which is a space of DV widescreen size.

  Import your Source 1 (1920 x 1080 16:9)-that must fill the space of the monitor Edit once the scale is automatically just to fill the space of the Edit monitor.

  Import your Source 2 (720 x 480 which is what is because it has a format of 1.0 pixels)-that does not fit properly. Balance this video in Edit area monitor to enter space monitor without black borders.

  It is unclear why the project 720 p settings have been set for this instead of NTSC DV widescreen. But please implement your project as described above, then export as suggested.

  I have suggested above based on destination DVD VIDEO to DVD disc. When you have a montage with several formats, you set an adjustment everything with scaling in the monitor area space Edit put in place by the predefined project and major. General guideline - the project preset should correspond to the properties of the media source... and with more than one type of format, you define major and if adapt everything with scaling if you don't want black borders.

  Another tip... When you want to scale width and height separately in edit box monitor, first go to applied effects tab/Applied effects Palette/panel of the selected clip expanded Motion and remove the box keep the Proportions.

  Please consider. And then we'll try to condense all that into a workflow that will work for you.

  Thank you.

  RTA

• Search feature with several web languages production results in all languages

  I have a question where web search in my outings with several languages results in all languages. For example, if the user enters a word that can appear in all the outputs regardless of the language, the results will display all HTML pages for each language when it appears.

  Is it possible to set up the web output so that if the user displays the English content, only the HTML pages in English are displayed when you use the search function?

  Thank you

  Chris

  Hello

  Personally, I doubt that a patch would solve the problem. Maybe it will be, and it is certainly worth a try, but don't be too shocked if you find that you must apply the service release and nothing changes.

  My own experience (as my little finger) is whispering in my ear (or abdomen) that probably is simple settings, that you set up before and during the build.

  I didn't know any reference to the version of RoboHelp you use here, so I'll use version 11 because it is likely the most common version used at the moment. And if you have 10 or 9 or even 2015 release, the steps should be almost identical.

  When you examine the presentation of single Source settings, expand your content categories and select one. Note that for each of them, you have an opportunity to choose a conditional Expression to build.

  

  I say this because if a conditional build expression causes points to not appear in the output, the elements must also not appear in the search.

  My thought here, you need to configure some conditional tags to build carefully, then associate tags with subjects that do not apply to each category. Thus, for English subjects, create and associate a label named "English". Same thing for the other languages. When you prepare to generate, consider each of the categories, click on this button to set and exclude the languages that do not apply. So if you have four languages, English, Spanish, French and German, maybe, and your category is for English, you would create a create an Expression that looks like this:

  

  Give it a go and see how you rate.

  See you soon... Rick

• I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the doc

  I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the document (replacing the existing document) and close. Then another person can open the same document digitally sign another area of the form, save it, and close it. So on, and so on. Is there a way to do this? At the end of the day, I would end up with a PDF file with literally hundreds of signatures to enable different ACC everywhere...

  I don't understand what the problem is. In the post of the davidr96549424 on May 8, 2015 07:58 you presented a structure of a correct document. Is the issue of the creation of this structure in a PDF file? For this, you will need an Acrobat, not reader.

  XI in Acrobat, select Tools-> forms-Edit. Click 'No' on the form fields 'detect '. In the tasks Panel that opens, click on "add new field". Select "Digital Signature" and move it to the location in the document where you want to than the appearance of the signature to be. Repeat that for signature fields as you want. Users will sign by clicking on the prepared unsigned signature field which shows the dialog box "sign. Do not forget that as TSN has noted that a digital signature applies to the entire document. The entry in the document where it is is irrelevant. Each next signature covers all previous signatures.

  Your users can also sign a document from anywhere that they want without signature fields already prepared. For this select fill & sign-> work with certificates and the type of signing you want to sign up with. A dialog box that will tell you a rectangle for the appearance of signature rises and after you draw the rectangle of the dialog 'Sign' rises.

  PDF/Acrobat doesn't have a limit on a number of signatures in a PDF document. But! Don't forget that when you open a PDF file with Acrobat/Reader signatures valid all of them and takes time (several seconds - until 10 - for every signature), so if you have several signatures of dozens of their validation open can take a long time.

  I don't know how build you your workflow so that each person signs the same PDF and saves it. Economy runs on the same computer where the PDF is stored. You'll have to decide how to allow different people to have access to the same PDF. They, of course, you may sign this only one-at-a-time PDF.

• Import Illustrator file with several layers and sublayers as composition by keeping all layers and sous-calques

  I drew a map of the country with several layers and sous-calques, including the streets, cities, railroads...

  Now, I want to create a template for my colleagues in After Effects.

  To do this, I want to import the AI in After Effects, holding all sublayers and layers in compositions and subcompositions.

  When I do, I get the first two layers correctly, others just in a merged publication.

  What can I do to get all the layers of each as a layer in After Effects?

  Best regards, Raphael

  Illustrator imports only the first level of the layers. If you have groups or paths below you must release layer groups. The layers will then be stacked in the order in the form of layers. Then you need to move them to the top.

  The procedure is to select a layer in the layer Illustrator Panel, then without selecting any which specific element in the layer click on the menu in the upper right corner and select release to layers. All an elements in this layer will be transformed into layers. Now, select all, and drag them to the top above the original layer. This will leave the empty original layer and put all the elements in new layers.

  Here is a tutorial I made there are a bunch of years and who uses this technique to transform a mixture in a morphing.

  Morphing with Adobe Illustrator. I hope this helps.

• Is it possible to 'Load Up' the cursor with several elements of 'Place '?

  It happens quite often that I have a folder with several items that I want to place. I can go back individually and D command to the folder window to choose the order of the day and then place in the document. When there is page after page of items, it would be useful to be able to select multiple items that will go on a single page and then "spit their" so to speak, of the cursor by repeated clicks, machine gun style. Is this possible to do?

  
  TIA,

  Ken

  Altogether. Select all. If they are not in the right order when you go to the place, use the arrows to scroll and the ESC key to cancel an object.