Analysis fails "Device already in use.

Similar Questions

• "NMH410 do not have access via the Explorer: name of local device already in use.

  I can't connect with my NMH410 through Explorer. It worked fine, but I must have done something wrong. Device name Local message already in use keeps popping up, even after the removal of the former as links indicated elsewhere. I changed the name of the device backward (which may be where it started). Also devices that were not previously connected Gets the same response. I tried on XP and Vista. I have also a router Linksys (WRT610N) that had me install Home Network Defender. It was a pain to get rid of it and I would not be surprised if this is part of the problem.

  I'm running out of options. I would consider same formatting for all start over, but prefer not because I have to get all my MP3 somewhere somehow... Help, please.

  Bart

  Hi bartled,

  I suggest you try to do a hard reset on your NMH410. To do a reset, while the device in operation - press the reset for 10 seconds-, and then unplug the cable (keep pressing the reset button) - wait 10 seconds - reconnect the power cable (by pressing the reset button) - wait 10 seconds before you release the reset button. Once the lights are solid, check out the "friendly name" of your NMH410 via the LCD screen. It should be to the default name "Mediahub. Try to use 'Mediahub' on your browser and check if you can access the user interface of your device.

  See you soon!

• DirectSound resources such as the level of priority were already in use by an other appellant - have no sound - no audio device

  DirectSound resources such as the level of priority were already in use by an other appellant - have no sound - no audio device

  Hi CindySantonas,

  ·         You have made any changes recently?

  This problem can occur if your sound card is not configured in the Panel as default device for sound playback.

  Method 1: Follow the below mentioned article and see if it helps.

  Sounds may not play in programs and you receive an error message "0x8878000a" in the DirectX Diagnostic tool in Windows XP, Windows 2000, or Windows Millennium Edition

  Method 2: Run automated troubleshooting and check if it helps.

  Diagnose and automatically repair audio playback problems

• Error 633: the modem (or other connecting device) is already in use or is not configured correctly. Any solution?

  I have Microsoft Vista Home Premium edition. I use the data card (broadband +, model - HUAWEI EC1262) to connect to the internet.
  I get error 633 whenever I try to use the data card to connect to the internet on my laptop. He says that "the modem (or other connecting device) is already in use or is not configured properly" and preventing me from accessing Internet.

  I tried with a different brand of card data, but still getting same error. Map data even works on another laptop with Win7.

  I did all the options like:
  1 uninstall and reinstall modem drivers
  2. release the COM port and the new port assigng

  We always get but same error. Any solution for this problem would make.

  Have you tried system restore? If you can restore the system to the date where it worked fine maybe it will work.

  System Restore frequently asked questions.

• Sharing of readers do not reconnect - error "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  Original title: Shared readers do not reconnect

  I have two PCs connected wireless. A laptop (Vista Business) was the drives mapped to actions on the other PC (XP). Whenever the Vista PC is started or out of hibernation, or after only a short period of time these discs are not available. Click on the drive in Explorer to display the message "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  If I click on 'Network' within Solution Explorer, the XP PC is not visible. The only way that I can "reconnect" these disks is to go into my anti-virus (Trend) and open the network map. This shows the XP PC and then the shares are available through Explorer - XP PC is still not visible by clicking network however.

  It started only happens in the last two months - cannot locate exactly when, but quite recently. I use connections to store small files and backup critical files a few before nailing the laptop away and it is quite annoying to have to go through this routine every time.

  Any ideas?

  Just in case it helps others - I found that if I make sure that my XP PC has a fixed IP address, and then set up the shares so that they are defined using the IP address and not share names, then I do have more problems - seems like it's something to do with Windows solve the share names rather than something to do with the personal firewall after all.

• net.rim.device.api.io.IOPortAlreadyBoundException: SMS port already in use.

  It's strange, the code works fine on j2me, but it does not work on Blackberry. I'm testing with Blackberry 9000 V4.6 emulator. He throws net.rim.device.api.io.IOPortAlreadyBoundException: SMS port already in use. when I try to open a connection.

  The line below throws the exception:

  MC MessageConnection = (MessageConnection) Connector.open (connection);

  It seems that the port is already open, but I don't know that I finally closed the connection by exiting the application.

  The link below gives me a great help:

  http://supportforums.BlackBerry.com/T5/Java-development/SMS-MessageConnection/m-p/63975#M7177

• Problem: Error 633: the modem (or other connecting device) is already in use or is not configured correctly.

  While I am connected to internet using Reliance Netconnect Huawei 1260, the connection disconnects after 10 to 15 minutes. Shows as connected Netconnect but does not work. I try to disconnect the connection, but it gives an error.

  Reconnect to always remove the modem and then re - login again.

  Please provede me a permanent solution to this. I use Windows 7 Enterprise

  Hello

  1. If it works well before?

  2. what version of Modem drivers do you use? Do you have any other device connected to the computer?

  First of all, I suggest you to check if the modem is compatible with Windows 7.

  Check out the link:

  Windows 7 Compatibility Center:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  I would also recommend to connect the modem to a different computer and check if it detects there. If it does not work on another computer also, then the problem is with the modem and I would ask you to contact the manufacturer of the modem for any further assistance.

  Error 633 indicates that the port is already in use or is not configured for remote access dial out. You may need to check if the VPN and the connection connection try to use the same port that is causing the problem. You may need to check the settings of the modem and change the port for your needs.

  To work around this problem, use one of the following methods:

  Method 1:

  Reserves explicitly the TCP port that is used for the VPN connection. To do this, follow these steps:

  a. click Start, click run, type regedit.exe in the Open box and then click OK.

  b. in the registry editor, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters

  (c) in the Edit menu, point tonewand then click multi-string value.

  d. rename the multi-string value as 'ReservedPorts' and then double-clickReservedPorts.

  e. in the value data box, type1723-1723, and then click OK.

  f. exit the registry editor.

  Registry warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  .

  Method 2:

  Use the netstat command to find the program that is using port 1723. Then, end the process for this program. To do this, follow these steps:

  a. click Start, click run, type cmd.exe in the Open box and then click OK.

  b. at the command prompt, type the following command and press ENTER:

  NETSTAT - aon

  c. in the result which appears, identify the process ID for the program, if any, who is using the TCP port 1723.

  d. at the command prompt, type the following command and press ENTER:taskkill/pid PID/f

  Note: The taskkill command terminates the process that corresponds to the ID of the process. The/F option is used forcefully to complete the process.

  e. at the command prompt, typeexitand press ENTER to quit the command prompt.

  Restart your computer. This may cause the program that uses the TCP 1723 port to use a different port.

  I hope that helps!

• I had to install Vista on a new driver because my current drive has failed. When I try to activate Vista with my key, I get a message that it is already in use.

  IHAD TO INSTALL A NEW HARD DRIVE IN MY GATEWAY COMPUTER. WINDOWS VISTA HAS BEEN INSTALLED ON THIS COMPUTER, WHEN I BOUGHT IT. I'M NOW BEING TOLD I HAVE TO ACTIVATE MY VISTA AGAIN PROGRAM AND THE KEY TO THE CODE THAT CAME WITH THE COMPUTER WILL NOT WORK BECAUSE "HE IS ALREADY IN USE»

  Please, do not type in uppercase.  It is considered as shouting in the forums and is bad netiquette.  We already know your issue is important to you or you would not use the forum.

  Try to activate by phone.  Click Start, type "slui 4" and press ENTER.  Select the region to get a phone number.

• I want to set up Firefox sync from scratch using an account I own which shows as 'already underway use'.

  I had a problem with my old Firefox Sync account (from work, using my work email address) and I want to implement synchronization using my personal account. When I try to set up synchronization, my only options seem to be "Create new account" or "I have an account". If I select Create a new account, I'm stuck because technically the account has already been used (I've set up Sync a few years before using my account personal but never used), even if it is not in use on any of my machines. If I select I have an account, he wants me to synchronize the device with a new one, but I don't have a second to synchronize. I want to use my existing account to set up the synchronization from scratch on my main machine. How can I get this done?

  on another note: firefox 29 that will be released at the end of the month will use a different account system (not compatible with the current accounts of sync), then it might not be useful effort setting a synchronization with the old powers now: synchronize your bookmarks from Firefox, history, passwords, etc.

• Cannot save edited image. Error message: "the file is already in use or left open.

  I tried to save JPEG images after making a few changes to Photoshop CS4. For each file, I get the message "cannot save (file name) because the file is already in use or left open." I checked my apps and nothing is running would be to use the image. Can someone look over my EtreCheck and tell me if there is something current funny? I'm working on hundreds of images, so just change the name is slow and heavy work around. The problem seems to have started after update 10.11.

  Thank you!

  Description of the problem:

  Photoshop will not save modified files

  EtreCheck version: 2.1.8 (121)

  Report generated on May 30, 2016 to 19:09:40 PDT

  Download EtreCheck from http://etresoft.com/etrecheck

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Material Information: ℹ️

  iMac (27 inch, mid 2011) (data sheet)

  iMac - model: iMac12, 2

  1 3.4 GHz Intel Core i7 CPU: 4 strands

  12 GB of RAM expandable

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  OK 4 GB DDR3 1333 MHz

  BANK 1/DIMM1

  OK 4 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ℹ️

  AMD Radeon HD 6970M - VRAM: 1024 MB

  iMac, 1920 x 1080

  System software: ℹ️

  OS X 10.11.5 (15F34) - time since started: 3 days 10:0:4

  Disc information: ℹ️

  Hitachi HDS722020ALA330 disk0: (2 TB)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 2,00 (1.46 free) tuberculosis

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  OPTIARC DVD RW AD - 5680H

  USB information: ℹ️

  Logitech USB receiver

  Computer, Inc. Apple IR receiver.

  Card reader Apple

  Apple Inc. FaceTime HD camera (built-in)

  Seiko Instruments Inc. SII Smart Label Printer 450

  EPSON EPSON scanner

  Nikon LS-5000 ED

  Seagate FreeAgent 1 TB FW

  EFI (disk1s1) < not mounted >: 210 MB

  back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)

  EFI (disk1s1) < not mounted >: 210 MB

  back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)

  Western Digital my book 1140 3 TB

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  Lightning information: ℹ️

  Apple Inc. Thunderbolt_bus.

  Guardian: ℹ️

  Any where

  Kernel Extensions: ℹ️

  / Applications/Toast 8 Titanium/Toast Titanium.app

  [no charge] com.roxio.BluRaySupport (1.1.3) [click for support]

  [no charge] com.roxio.TDIXController (1.6) [click for support]

  / Library/Application Support/Avast/components/fileshield/not signed

  [loading] com.avast.AvastFileShield (3.0.0 - 10.10 SDK) [click for support]

  / Library/Application Support/Avast/components/proxy/not signed

  [loading] com.avast.PacketForwarder (2.1 - 10.10 SDK) [click for support]

  / Library/Extensions

  [no charge] com.LogMeIn.hamachi (1.0) [click for support]

  / System/Library/Extensions

  [loading] com.logmein.driver.LogMeInSoundDriver (1.0.3 - 10.5 SDK) [click for support]

  [no charge] com.seagate.driver.PowSecDriverCore (5.1.1) [click to support]

  com.siibusinessproducts.driver.SLP [no charge] (1.1) [click for support]

  / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  [no charge] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [click to support]

  [no charge] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [click to support]

  [no charge] com.seagate.driver.SeagateDriveIcons (5.1.1) [click to support]

  Demons of launch system problem: ℹ️

  [failure] com.apple.logd.plist [click for more information]

  [loading] org.postfix.newaliases.plist [click to support]

  Launch officers: ℹ️

  [no charge] com.adobe.CS4ServiceManager.plist [click to support]

  [no charge] com.avast.secureline.update - agent.plist [click to support]

  [no charge] com.avast.secureline.userinit.plist [click to support]

  [no charge] com.avast.update - agent.plist [click to support]

  [no charge] com.avast.userinit.plist [click to support]

  [operation] com.carbonite.launchd.status.plist [click to support]

  [loading] com.fujitsu.pfu.ScanSnap.AOUMonitor.plist [click to support]

  Launch of the demons: ℹ️

  [failure] com.adobe.fpsaud.plist [click to support]

  [loading] com.avast.init.plist [click to support]

  [loading] com.avast.secureline.init.plist [click to support]

  [loading] com.avast.secureline.uninstall.plist [click to support]

  [loading] com.avast.secureline.update.plist [click to support]

  [loading] com.avast.uninstall.plist [click to support]

  [loading] com.avast.update.plist [click to support]

  [operation] com.carbonite.launchd.daemon.plist [click to support]

  [operation] com.carbonite.launchd.monitor.plist [click to support]

  [loading] com.carbonite.launchd.watcher.plist [click to support]

  Elements of user login: ℹ️

  Mail request hidden (/ Applications/Mail.app)

  iTunesHelper UNKNOWN (missing value)

  Dropbox application (/ Applications/Dropbox.app)

  Adobe Photoshop CS4 Application (/ Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app)

  Screenhero hidden UNKNOWN (missing value)

  Request for InstUtilLaunch (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)

  Application LOGINserver (/ Library/Printers/Brother/Utilities/Server/LOGINserver.app)

  AOUMonitor Application (/ Applications/ScanSnap online Update.localized/AutoOnlineUpdater.app/Contents/MacOS/AOUMonitor.app)

  Internet Plug-ins: ℹ️

  LogitechHarmony: Version: 2.0 - SDK 10.7 [click for support]

  Web of Google Earth plugin: Version: 6.0 [click for support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 2.4.4.2 [click for support]

  CoolirisWebKitPlugin: Version: Unknown [click for support]

  OfficeLiveBrowserPlugin: Version: 12.3.6 [click for support]

  AdobePDFViewerNPAPI: Version: 15.010.20060 - SDK 10.8 [click for support]

  FlashPlayer - 10.6: Version: 21.0.0.242 - 10.6 SDK [click for support]

  Silverlight: Version: 5.1.20513.0 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 21.0.0.242 - 10.6 SDK [click for support]

  iPhotoPhotocast: Version: 6.0

  AdobePDFViewer: Version: 15.010.20060 - SDK 10.8 [click for support]

  JavaAppletPlugin: Version: 15.0.1 - 10.7 to check the version of the SDK

  The Safari Extensions: ℹ️

  Facebook cleaner

  Latest news

  1 - ClickWeather

  Facebook Photo Zoom

  Unplug

  Ghostery

  Dashlane

  Amazon search discount

  PriceBlink

  WOT

  AdBlock

  3rd party preference panes: ℹ️

  Flash Player [click for support]

  Flip4Mac WMV [click for support]

  TechTool Protection [click for support]

  Time Machine: ℹ️

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 2.00 TB disk used: 536,90 GB

  Destinations:

  Feedback Up [Local]

  Total size: 999,86 GB

  Total number of backups: 50

  An older backup: 2016-04-06 19:21:02 + 0000

  Last backup: 2016-05-31 01:28:34 + 0000

  Backup disk size: too small

  Backup size GB 999,86 < (disc 536,90 GB X 3)

  By CPU process back to the top: ℹ️

  100% CarboniteDaemon

  3% WindowServer

  Console 3%

  hidd 1%

  1% adobe Photoshop CS4

  Top of the process of memory: ℹ️

  Com.apple.WebKit.WebContent 696 MB

  541 MB softwareupdated

  Safari 503 MB

  CarboniteDaemon 399 MB

  348 MB mds_stores

  Virtual memory information: ℹ️

  1.59 GB of free RAM

  3.24 GB of RAM active

  6.54 GB RAM idle

  1.51 GB RAM cable

  GB Page-ins 212,57

  Breaks in Page 443 MB

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• When installing sync tells me my e-mail address is already in use and won't let me go any further. I just got an email and do not want to install another. How can I configure sync?

  I can log in account synchronization with this URL https://account.services.mozilla.com management and is listed. When I go to the tab sync in the Preferences window, only two options are listed: set up a new account and or to pair a device. Setting up an account, I cannot use the e-mail address that I'd like to, saying that the email is already in use. I can not "associate a device" because the computer I'm trying to 'pair' is my main computer (laptop). I used sync mode at the time when it first came out and it seems as if there are new requirements (legal and other) forces me to set up a new account. How to set up and use the synchronization with the email address, I have already in place without having to use another email address?

  There was a major change in synchronization services back in December 2010, but nothing w9th regard to the username / email address and password for this time.

  This will reset your synchronization password if you don't remember, an existing account.
  
  https://services.Mozilla.com/reset-password/

  What ever you have stored on the server will be deleted if you will start with new data in the system.

• Cannot configure synchronization, can not delete 'old' sync acct, cannot create new account (email "already in use") storage = 0,0 FUBAR! Help!

  About 1 month ago received the message "Server error" sync a new device (Virtual Machine), I'm sorry, but I did not copy the exact message, but remember you that the notice was to try later. Long story short, after 3 days worth of 'try later' with the same error and many users have the same error on innernetz that I decided to delete my acct sync & start reading. BAD MOVE.

  When you try to delete the account I get this really fv # "cutesy" stupid $ing Mozilla message (screenshot):
  I AM NOT AMUSED.

  Trying to create a new account receives «already in use»
  NO AMUSED2

  Synchronization of compensation data "claims" successfully cleared. (How can that be, if the "dinosaur is the treadmill power off" at first?) Again, I'M NO FUN 3

  A quota increase request reveals 0.0 k stored: NO AMUSED4

  At this stage (MORE than a month later) in case you didn't notice, I am clearly NOT FUN, not to mention the being without the ability to sync my devices. Next step is to empty Firefox, but reluctantly, for Chrome or any other browser. I can NOT simply continue to use ANY browser without this vital function, and the State of my previously stored data sync 'missing' being so flippantly described BY YOU as "out of the treadmill" causes me MAJOR grief... had HUNDREDS resetting passwords, etc... let... you guessed me it... NOT AMUSED.

  Please advise as soon as POSSIBLE. TYVM.

  EDIT TO add: rank military security? If true, the sky help us...

  I am happy to read that.

  The team has pushed some changes that fixed some errors few users like you were getting while trying to delete the data from our servers.

  We want to give freedom to our users to decide if they want or do not want to delete their data. In this case, technical difficulties prevented some users to do and we are sorry for this topic.

  Go ahead, take into account that our servers store the data permanently and databases are cleaned if the stored data does not within a reasonable period of time.

• Satellite A200: Modem has an error 633: already in use or is not configured properly

  My laptop is A200-FE0.

  When I tried to make a dial-up connection, there is a window of error says:
  "Error 633: the modem (or other connecting device) is already in use or is.
  not configured correctly.

  When I test my modem by clicking the modem of the request under the Diagnostics tab in the modems tool of the
  The modem control panel, normally responds and seem to work
  correctly.

  When I test my modem using Toshiba diagnostic tools, it displays "pass" and I canhear the tone Dáil too.

  I tired to edition and reinstall the driver twice.
  But I can't make a dial-up connection and get error 633. I'm really upset about it.

  Please help me! Thank you very much!

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=27402

• "Impossible to copy the requested resource is already in use" error message when you try to move the file to the thumb drive.

  I'm going to try really hard to do this makes sense, but I don't know much about computers.  Bear with me.

  Brother gave me a computer.  A graphics Nvidia GeForce 9800 inside.  Because it restored the system settings, the drivers are missing.  Can not connect this computer to the internet.

  So, I went to the nvidia site and downloaded the necessary drivers on my OTHER computer, which is what I'm now on the right.  The download ends, and when I try to move the (drivers) file in the USB, I get this delicious "cannot copy xxxx that the requested resource is already in use".  It is not in use.  I can't even use it on this computer as its pilots for a graphics card that is not yet part of this computer.

  What should I do to make sure I put the file with the drivers on a USB key, on the port to the other computer.

  (by the way, this also occurs with a few random mp3s of the mine.  10 of the 12 tracks on a CD, for example, does copy on the USB no problem, but then two of them to come up with the error message, for no apparent reason.  Don't know if it's relevant)

  Try another USB key. That one is may be damaged or failing. In the meantime, to burn the drivers on a CD - R disc (not CD - RW) to take the target machine. MS - MVP - Elephant Boy computers - don't panic!

• Impossible to activate Vista, error: product already in use.

  Original title: activation of Vista.

  I'm trying to activate my vista Home premium on a new drive hard asmy old hard drive failed, but he repeats to me product already in use! How can I activate my product now? as I said I had it installed on a different hard drive but that didn't need now to activate the product on the new hard drive!

  Check how to activate Vista in tribune, here:

  http://support.Microsoft.com/kb/940315

  Tom Ferguson