Impossible to activate Vista, error: product already in use.

Similar Questions

• Activation error: product already in use key

  I changed my HDD may because old hard drive has been courupted he did reverse what it self and ask me to change the hard drive now, I changed the hard drive. It's been more than a year I m using windows vista, but suddenly microsoft request the activation of the product... I did several times but nothing happens again n it asks again for the activation of the product and when I give the activation code it tells me that it is in respect of the use. now, the deadline has passed n my computer restarts with the same product activation window I entered the key, but displays the error code. I also noticed that my computer restarts every one to two hours. I'm very confused m help please thanks...

  You have to manually enable.  This issue of reactivation occurs from time to time (in fact rarely) but there is nothing to worry.

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate Vista.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to activate Windows Vista, error: key already in use.

  Original title: help!

  would like to know why my windows vista key won't suddenly turn on?  I bought legitimate about 5 years ago.  After formatting my computer, he refuses to re - activate after the episode.  don't ever tell me the key is already used on another computer.  I don't even have a second computer.  key is thank you!

  would like to know why my windows vista key won't suddenly turn on?  I bought legitimate about 5 years ago.  After formatting my computer, he refuses to re - activate after the episode.  don't ever tell me the key is already used on another computer.  I don't even have a second computer.

  ======================================

  Display of product keys is not allowed in this forum.
  
  See the following link:

  "The things that will get you immediately banned from this forum.
  http://answers.Microsoft.com/en-us/page/FAQ#faqCodeConduct4

  The following links might be worth the trip.

  Windows Vista - fix activation problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

  Vista activation - Frequently asked Questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

  (950929) how to contact a Microsoft
  Center of product by phone Activation
  http://support.Microsoft.com/kb/950929

• Impossible to activate Vista, error: 0xC004E003

  Original title: Windows Vista product key required after 5 years!

  I've been running Windows Vista for nearly 5 years, pre-installed on my PC.  Last week he charge upward and said I had to enter my product key that I was not running a genuine version of Vista.  I entered the key, but every time I go there I get the error 0xC004E003 Code.  I have not updated my motherboard and the only change to my hardware was an upgrade of RAM 2 GB for more than a year.

  I'm under SP2 with all the latest news system installed.

  What I really need to buy a new product key/upgrading to Windows 7 (I hope not that the budget is very tight) or is there something obvious that I'm missing?

  Hello

  I suggest you to see the link:

  Error message when you try to activate a copy of Windows Vista: "the Software Licensing Service reported that license evaluation failed: 0xC004E003".

  http://support.microsoft.com/kb/950755.

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

• Vista Ultimate key already in use - can I know who to?

  Microsoft Action Pack subscriber / partner, the company, I work for receives software "evaluations" from time to time. We have a copy of Windows Vista x 86 / x 64 with a license key. I'm trying to implement on a test machine to create a test environment complete with XP Pro, Vista (Ultimate), Win 7 Enterprise, Server 2008 R2 and Server 2003, but the Vista key is already in use. The test environment will be used for the field and GPO access test remote testing, evaluation of software (make sure it works), HCL, etc...

  I know no one in the company is to use it as we are all on the XP Pro machines. Is it possible to know who is using it before calling Microsoft to save my test machine and potentially ruin the someone day?

  MS do not store / identify the PC on which the software is installed, it only identifies a key as used if it was installed / activated within a certain period (a short time of xx days)

• Should UHVVHQWLHV I do to activate windows vista, which has already been used on another pc

  I recently removed my hard drive of a computer toshiba laptop that is is no longer in use, but the custom of software windows vista activate as it says it is already in use. But it is not in use on any other pc now. Installation disks are toshiba original restore discs, but that's all I have.

  Any help would be great.

  Thank you

  Unfortunately, an OEM of Windows VIsta version cannot be activated on another computer.  This license is permanently linked to the original computer Toshiba it comes with and not is not transferable.

• Code key product already in use.

  Hi all

  I bought Windows Vista Ultimate OEM (32-bit) Software a few years when I built my PC (from Newegg.com). I have format my computer every year and reinstall windows using this DVD. I formatted and reinstalled windows over the years and have no issues. I just formatted and reinstalled windows yesterday and I'm now receive a message saying my product key code is already in use. Could this be caused by me in shape and for some reason it now visualize myself as another computer, try to use the same product key code? Would be another re - format and new installation fix the problem or is there another solution?

  I must have typoed my question in the search box the first time because I could not find any solution to my question above but I tried again and I found the solution.

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate Vista.

  I was able to use the automated system and it worked :) Problem solved.

• Invalid key product (already in use)

  Hello team Microsoft,

  Moreover, my name is Tomylight and im from the Philippines. I really need your help please respond to my problem. so there it goes, I bought a new laptop (Compaq Presario) and when I bought it, they gave me my 1st full genuine copy of Windows Vista (Home Basic) with the COA, holographic image to the CD too... it was the first time that I formatted my laptop but after all the minute wait when I checked my computer information it says that I have to activate it then I did However, it is said that my product key is in USE? What is quite comfusing coz this is the first time I coded it. Help me please. I want that my Windows Vista genuine.

  Hoping for your response guys. Please help me.

  Hi Tomylight,

  The product key is used because 'you' use it. In other words it has already been activated once and the number of product key appears on the activation of Microsoft database. This isn't a problem, instead of activate over the internet, a simple call to the activation of Microsoft, line will solve the problem. See this link from my Web site for more details:http://vistasupport.mvps.org/product_key_already_in_use.htm

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web:http://vistasupport.mvps.org ; Web:http://www.silversurfer-guide.com

• Error modem already in use or is not configured properly

  Original title: try to use the modem internet cleartalk on laptop

  Downloaded there screen says.  but when I try to connect it gives me an error that it is already in use or is not configured correctly. It is of ClearTalk EVDO Mobile Broadband

  Hello

  1. If it works well before?

  2. what version of Modem drivers do you use?

  3. What is the model number of your computer modem?

  4. do you have other devices connected to the computer?

  The error you receive is typical of drivers who don't are incorrect or not installed. You run the system with UAC turned?

  I recommend you to connect the modem to another computer that is running Windows Vista and check if it detects there. If it does not work on another computer also, then the problem is with the modem and I would ask you to contact the manufacturer of the modem for any further assistance.

  You can also try the following methods and check if it helps.

  Method 1:
  To resolve this problem, remove the modem, and then restart the computer. When the computer restarts, Windows detects the modem and attempts to install the driver appropriate for that. To do this, follow these steps:
  a. log in the computer as an administrator or as a member of the Administrators group.
  b. click Start and then click Control Panel.
  c. double-click phone and Modem Options.
  d. click the Modems tab.
  e. in the following modems are installed list, click the modem that you want to delete and then click Delete .
  f. click Yes in response to the ""are you sure you want to remove the modem selected from your system? " " message.
  g. restart the computer.
  h. the found new hardware wizard starts. Follow the instructions in the wizard to reinstall the modem.

  Method 2:
  You can re-install the modem driver on the manufacturer's Web site and check.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Reference:--

  Solve the problems associated with the modem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-modem-problems

• Product already in use key

  Your windows product key is already in use. Well well, it is on this computer and must be in use. I upgraded my hardware on this computer, and now I have to activate windows again. I don't need to buy what I already own. Help, please!

  "kmart490" wrote in message News: f7a1819e-2aa9-4aec-bb8f-151a173bde15...

  Your windows product key is already in use. Well well, it is on this computer and must be in use. I upgraded my hardware on this computer, and now I have to activate windows again. I don't need to buy what I already own. Help, please!

  Yep - the key is already in use, from your previous installation.
  What material update you? What Windows license type you have (OEM/retail)?
  Try the Activate by phone.
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Configure Apache HTTP Srvr for WLS12c error - "address already in use: make_sock: could not bind to address 80.

  Hello the Experts of Oracle.

  I already have

  1. installed the Apache HTTP Server (with libraries)
  2. Downloaded the Plugin of Apache WLS12c
  3. copied the plugin files into the appropriate directories.
  4. Modify the httpd.conf (see below)

  At the present time, I try to start the Apache HTTP server and runs in an unexpected error.

  WHY APACHE ATTEMPTS TO LISTEN ON PORT 80. ?  I've SPECIFIED the PORT 8888

  Question: How to go beyond the error.   -| "Address already in use: make_sock: could not bind to address 80 '

  My server is 192.168.1.21.  In my view, that it has ESTABLISHED processes.  Yet, he reports, that it cannot start.

  

  Here is the content of the httpd.conf file.  My customizations are in Red.

  #

  # This is the main Apache HTTP server configuration file.  It contains the

  configuration directives # that give the server its instructions.

  See # < URL: http://httpd.Apache.org/docs/2.4/ > for more information.

  # See especially

  # < URL: http://httpd.Apache.org/docs/2.4/mod/directives.html >

  # for an analysis of each configuration directive.

  #

  # Do NOT simply read the instructions here without understanding

  # what they do.  They are there only as advice or reminders.  If you do not know

  # consult the online documentation. You have been warned.

  #

  # Configuration and logfile names: If the file names that you specify for a lot

  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the

  # server uses this explicit path.  If filenames do * not * start

  # with "/", the value of ServerRoot directive is preceded by - both "logs/access_log".

  # with ServerRoot set to "/ usr/local/apache2" will be interpreted by the

  # Server as "/ usr/local/apache2/logs/access_log", considering that "/ logs/access_log".

  # will be interpreted as "/ logs/access_log".

  #

  # ServerRoot: The top of the directory under which the server tree

  # configuration, error and the log files are kept.

  #

  # Do not add a bar slash at the end of the directory path.  If you point

  # ServerRoot to non-local disk, remember to choose a local drive on the

  # Directive Mutex, if based on mutex files are used.  If you want to share the

  # ServerRoot even for several demons httpd, you will need to change to

  # PidFile less.

  #

  ServerRoot "/ usr/local/apache2.

  #

  # PidFile: The file in which the server should record its process

  ID # when it starts.

  #

  PidFile ' / usr/local/apache2/logs/httpd.pid '.

  #

  # Mutex: Allows you to set the mutex mechanism and the mutex file directory

  # for individual mutex, or change the default global values

  #

  # Uncomment and change the directory if mutexes are based on files and the default

  # mutex file directory is not on a local disk or is not suitable for some

  # other reason.

  #

  # Default Mutex: newspapers

  #

  # Listen: Allows you to bind Apache to specific IP addresses and/or

  ports #, instead of the default value. See also the < VirtualHost >

  directive #.

  #

  # Change this to listen on specific IP addresses below for

  # prevent Apache glomming on all related IP addresses.

  #

  # Example-> look 12.34.56.78:80

  # Listen api.astcorporation.com:8001

  Listen 8888

  #

  # Dynamic Shared Object (DSO) Support

  #

  # To be able to use the features of a module that was built as a DSO you

  # duty place corresponding 'LoadModule' lines at this location until the

  # directives that it contained are actually available _avant_, that they are used.

  # Modules statically compiled (those listed by "httpd-l") is not necessary

  # to be responsible here.

  #

  # Example:

  # LoadModule foo_module modules/mod_foo.so

  #

  LoadModule authn_file_module modules/mod_authn_file.so

  #LoadModule authn_dbm_module modules/mod_authn_dbm.so

  #LoadModule authn_anon_module modules/mod_authn_anon.so

  #LoadModule authn_dbd_module modules/mod_authn_dbd.so

  #LoadModule authn_socache_module modules/mod_authn_socache.so

  LoadModule modules/mod_authn_core.so authn_core_module

  LoadModule modules/mod_authz_host.so authz_host_module

  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module

  LoadModule modules/mod_authz_user.so authz_user_module

  #LoadModule authz_dbm_module modules/mod_authz_dbm.so

  #LoadModule authz_owner_module modules/mod_authz_owner.so

  #LoadModule authz_dbd_module modules/mod_authz_dbd.so

  LoadModule modules/mod_authz_core.so authz_core_module

  LoadModule modules/mod_access_compat.so access_compat_module

  LoadModule auth_basic_module modules/mod_auth_basic.so

  #LoadModule auth_form_module modules/mod_auth_form.so

  #LoadModule auth_digest_module modules/mod_auth_digest.so

  #LoadModule allowmethods_module modules/mod_allowmethods.so

  #LoadModule file_cache_module modules/mod_file_cache.so

  #LoadModule cache_module modules/mod_cache.so

  #LoadModule disk_cache_module modules/mod_cache_disk.so

  #LoadModule cache_socache_module modules/mod_cache_socache.so

  #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

  #LoadModule socache_dbm_module modules/mod_socache_dbm.so

  #LoadModule socache_memcache_module modules/mod_socache_memcache.so

  #LoadModule macro_module modules/mod_macro.so

  #LoadModule dbd_module modules/mod_dbd.so

  #LoadModule dumpio_module modules/mod_dumpio.so

  #LoadModule buffer_module modules/mod_buffer.so

  #LoadModule ratelimit_module modules/mod_ratelimit.so

  LoadModule modules/mod_reqtimeout.so reqtimeout_module

  #LoadModule ext_filter_module modules/mod_ext_filter.so

  Request_module modules/mod_request.so #LoadModule

  #LoadModule include_module modules/mod_include.so

  LoadModule modules/mod_filter.so filter_module

  #LoadModule substitute_module modules/mod_substitute.so

  #LoadModule sed_module modules/mod_sed.so

  Modules/mod_deflate.so deflate_module #LoadModule

  LoadModule mime_module modules/mod_mime.so

  LoadModule log_config_module modules/mod_log_config.so

  #LoadModule log_debug_module modules/mod_log_debug.so

  #LoadModule logio_module modules/mod_logio.so

  LoadModule env_module modules/mod_env.so

  #LoadModule modules/mod_expires.so expires_module

  LoadModule headers_module modules/mod_headers.so

  #LoadModule unique_id_module modules/mod_unique_id.so

  LoadModule setenvif_module modules/mod_setenvif.so

  LoadModule modules/mod_version.so version_module

  #LoadModule remoteip_module modules/mod_remoteip.so

  #LoadModule modules/mod_proxy.so proxy_module

  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule

  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule

  Modules/mod_proxy_http.so proxy_http_module #LoadModule

  #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

  #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule

  #LoadModule proxy_express_module modules/mod_proxy_express.so

  #LoadModule session_module modules/mod_session.so

  #LoadModule session_cookie_module modules/mod_session_cookie.so

  #LoadModule session_dbd_module modules/mod_session_dbd.so

  #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

  #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

  #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

  #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

  #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

  LoadModule modules/mod_unixd.so unixd_module

  #LoadModule dav_module modules/mod_dav.so

  LoadModule status_module modules/mod_status.so

  LoadModule autoindex_module modules/mod_autoindex.so

  #LoadModule info_module modules/mod_info.so

  #LoadModule cgid_module modules/mod_cgid.so

  #LoadModule dav_fs_module modules/mod_dav_fs.so

  #LoadModule vhost_alias_module modules/mod_vhost_alias.so

  #LoadModule modules/mod_negotiation.so negotiation_module

  LoadModule modules/mod_dir.so dir_module

  #LoadModule actions_module modules/mod_actions.so

  Modules/mod_speling.so speling_module #LoadModule

  #LoadModule userdir_module modules/mod_userdir.so

  LoadModule alias_module modules/mod_alias.so

  #LoadModule rewrite_module modules/mod_rewrite.so

  # Added on 23/09/2015 | -enabling reverse proxy requests for users of WLS12c

  LoadModule modules/mod_wl_24.so weblogic_module

  < IfModule unixd_module >

  #

  # If you want httpd to run as a different user or group, you must run

  # httpd as root initially and it will pass.

  #

  # Group / user: the name (or #number) of the user/group to run httpd as.

  # It is generally advisable to create a dedicated and aggregatable for user

  # httpd, as with most system services are running.

  #

  Demon of the user

  Daemon group

  < / IfModule >

  Server configuration # 'hand '.

  #

  # The directives in this section implement the values used by the 'hand '.

  # Server, which meets all demands that are not managed by a

  definition of # < VirtualHost >.  These values also provide defaults for

  # all < VirtualHost > containers you can set later in the file.

  #

  # All these directives may appear inside containers < VirtualHost >,.

  # in which case the value default parameters will be substituted for the

  virtual host of # being defined.

  #

  #

  # ServerAdmin: Your address, where problems with the server should be

  # e-mail.  This address appears on some generated by the page server, such

  # as error documents.  for example [email protected]

  #

  ServerAdmin [email protected]

  #

  # ServerName gives the name and the port used by the server to identify itself.

  # This can often be determined automatically, but we recommend that you specify

  # explicitly to avoid problems during startup.

  #

  # If your host doesn't have a registered DNS name, enter its IP address here.

  #

  Servername 192.168.1.21

  #

  # Deny access to the whole of the file system of your server. You must

  # explicitly allow access to web content directories in other

  blocks of # < directory > below.

  #

  < directory / >

  AllowOverride none

  Need all refused

  < / Book >

  #

  # Note that, from this point forward you must precisely enable

  features special # to be enabled - so if something doesn't work not as

  # you might expect, make sure that you have specifically enabled it

  # below.

  #

  #

  # DocumentRoot: The directory you are going to use your

  documents #. By default, all requests are taken from this directory, but

  aliases and symlinks # can be used to point to other locations.

  #

  DocumentRoot "/ usr/local/apache2/htdocs.

  < directory "/ usr/local/apache2/htdocs" >

  #

  # Possible values for the Options directive are "None", "All."

  # or any combination of:

  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

  #

  # Note that "MultiViews" must be named * explicitly *-'all Options '.

  # is not give it to you.

  #

  # The Options directive is complex and important.  Please see

      # http://httpd.Apache.org/docs/2.4/mod/core.HTML#options

  # For more information.

  #

  Options Indexes FollowSymLinks

  #

  # AllowOverride controls what directives may be placed in .htaccess files.

  # It can be 'All', 'None', or any combination of key words:

  # AllowOverride FileInfo AuthConfig Limit

  #

  AllowOverride None

  #

  # Controls who can get stuff from this server.

  #

  Need of all granted

  < / Book >

  #

  # DirectoryIndex: sets the file Apache will serve if a directory

  # is requested.

  #

  < IfModule dir_module >

  DirectoryIndex index.html

  < / IfModule >

  #

  # The following lines prevent the .htaccess and .htpasswd files to be

  # seen by customers of the Web.

  #

  < files ".ht *" >

  Need all refused

  < / files >

  #

  # ErrorLog: The location of the error log file.

  # If you do not specify an ErrorLog directive in a < VirtualHost >

  # container, error messages related to this virtual host will be

  # logged here.  If you * define an error for a < VirtualHost > log file

  container of #, that host errors will be logged there and not here.

  #

  ErrorLog "logs/error_log".

  #

  # LogLevel: Control the number of messages in the error_log.

  # Possible values include: debug, info, notice, warn, error, crit,.

  # emerg, alert.

  #

  LogLevel debug

  < IfModule log_config_module >

  #

  # The following directives define some nicknames format for use with

  # a directive CustomLog (see below).

  #

  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"

  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune

  < IfModule logio_module >

  # You must enable mod_logio.c use %I and frequency

  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio

  < / IfModule >

  #

  # The location and format of the access (Common Log Format) log file.

  # If you do not have any logfiles access set in a < VirtualHost >

  container of #, they will be saved here.  On the other hand, if you * do *.

  # define per - < VirtualHost > access logfiles, transactions will be

  # logged there and * not * in this file.

  #

  CustomLog "logs/access_log" common

  #

  # If you prefer a log file of access, agent, and referer information

  # (Combined logfile format) you can use the following directive.

  #

  #CustomLog "logs/access_log" combined

  < / IfModule >

  < IfModule alias_module >

  #

  # Redirect: Allows to tell clients the documents used for

  # exist in your server's namespace, but no more. The customer

  # make a new request for the document at its new location.

  # Example:

  # Redirect permanent/foo http://www.example.com/bar

  #

  # Alias: Maps web paths into paths of file system and is used to

  # access content that don't live under the DocumentRoot directive.

  # Example:

  # Alias /webpath/full/filesystem/path

  #

  # If you include a trailing / on /webpath, then the server will be

  # require that he be present in the URL.  It is also likely that

  # duty provide a < Directory > section to allow access to

  # the path to the file system.

  #

  # ScriptAlias: This controls which directories contain server scripts.

  # ScriptAliases are essentially the same as assumed names, except that

  # documents in the target directory are treated as applications and

  # executed by the server on demand, rather than as documents sent to the

  client of #.  The same regulation on flight "/" applies to the ScriptAlias

  # as for the Alias directives.

  #

  ScriptAlias/cgi-bin / "/ usr/local/apache2/cgi-bin /".

  < / IfModule >

  < IfModule cgid_module >

  #

  # ScriptSock: On threaded servers, refers to the access path to the UNIX

  decision # used to communicate with the CGI mod_cgid daemon.

  #

  #Scriptsock cgisock

  < / IfModule >

  #

  # "/ usr/local/apache2/cgi-bin" just need to replace your ScriptAlias

  # CGI directory exists, if you have set up.

  #

  < directory "/ usr/local/apache2/cgi-bin" >

  AllowOverride None

  None of the options

  Need of all granted

  < / Book >

  < IfModule mime_module >

  #

  # TypesConfig points to the file containing the list of mappings from

  # MIME file extension - type.

  #

  TypesConfig conf/mime.types

  #

  # AddType allows you to add or replace the MIME configuration

  # the file specified in TypesConfig for specific file types.

  #

  #AddType application/x-gzip .tgz

  #

  # AddEncoding allows you to have certain browsers uncompress

  # information on the fly. Note: Not all browsers support this.

  #

  #AddEncoding x-compress. Z

  #AddEncoding x-gzip .gz .tgz

  #

  # If the AddEncoding directives above are commented out, then you

  # should probably define these extensions to indicate media types:

  #

  AddType application/x-compress. Z

  AddType application/x-gzip .gz .tgz

  #

  # AddHandler allows you to map certain "manipulators": file extensions

  # No actions associated with the file type. It can be either integrated into the server

  # or added to the directive of the Action (see below)

  #

  # To use CGI outside of ScriptAlias directories scripts:

  # (You will also need to add "ExecCGI" to the "Options" directive.)

  #

  #AddHandler cgi-script .cgi

  # For maps of type (negotiated resources):

  #AddHandler type-plan of the var

  #

  # Filters allow you to process content before sending it to the client.

  #

  # To parse .shtml for server-side includes (SSI) files:

  # (You will also need to add "Includes" the "Options" directive.)

  #

  #AddType text/html .shtml

  #AddOutputFilter INCLUDES .shtml

  < / IfModule >

  #

  # The mod_mime_magic module allows the server to use various boards of the

  content of the file itself to determine its type.  The MIMEMagicFile

  # directive tells the module where the definitions of suspicion.

  #

  #MIMEMagicFile conf/magic

  #

  # Customizable error responses come in three flavors:

  ((# 1) text 2) local redirects 3) external redirects

  #

  # Examples:

  #Error Document 500 "The server made a boo boo".

  #Error Document 404 Missing.html

  #Error Document 404 "/cgi-bin/missing_handler.pl"

  #Errordocument 402 http://www.example.com/subscription_info.html

  #

  #

  # MaxRanges: Number of channels in a Maximum request before

  # return the resource, or one of the extraordinary

  # values 'default', 'none' or 'unlimited '.

  # Default is to accept 200 beaches.

  Unlimited #MaxRanges

  #

  # EnableMMAP and EnableSendfile: on systems that support.

  projection in memory # or the sendfile syscall can be used to deliver

  # files.  Usually, this improves the performance of the server, but must

  # turn off when mounted network is served

  # file systems or if support for these functions is also

  # broken on your system.

  # Default: EnableMMAP, EnableSendfile Off

  #

  #EnableMMAP off

  #EnableSendfile on

  # Additional configuration

  #

  # The configuration files in the conf/extra/directory can be

  # included to add additional features or change the default configuration

  # the server, or you can simply copy their content here and change as

  # necessary.

  # Server-pool management (MPM specific)

  #Include conf/extra/httpd-mpm.conf

  # Multilingual error messages

  #Include conf/extra/httpd-multilang-errordoc.conf

  # Entries to the fancy directory

  #Include conf/extra/httpd-autoindex.conf

  # Language settings

  #Include conf/extra/httpd-languages.conf

  # User directories

  #Include conf/extra/httpd-userdir.conf

  # Info in real time on the applications and configuration

  #Include conf/extra/httpd-info.conf

  # Virtual hosts

  #Include conf/extra/httpd-vhosts.conf

  # Local access to the manual for the Apache HTTP Server

  #Include conf/extra/httpd-manual.conf

  # Distributed authoring and versioning (WebDAV)

  #Include conf/extra/httpd-dav.conf

  # Various default settings

  #Include conf/extra/httpd-default.conf

  # Configure mod_proxy_html to understand HTML4/XHTML1

  < IfModule proxy_html_module >

  Include the conf/extra/proxy-html.conf

  < / IfModule >

  # Secure connections (SSL/TLS)

  #Include conf/extra/httpd-ssl.conf

  #

  # Note: The following text should be present to support

  # start without SSL on platforms without equivalent/dev/random

  but # a statically compiled in mod_ssl.

  #

  < IfModule ssl_module >

  SSLRandomSeed startup builtin

  SSLRandomSeed connect builtin

  < / IfModule >

  #

  # Uncomment on the below to deal with user agents that deliberately

  # violate open standards by abusing DNT (DNT * must * be a specific)

  choice of end-users #)

  #

  # < IfModule setenvif_module >

  #BrowserMatch "MSIE 10.0"; bad_DNT

  # < / IfModule >

  # < IfModule headers_module >

  #RequestHeader unset DNT env = bad_DNT

  # < / IfModule >

  #= WLS 12 c routing Configuration. Seven 2015 =.

  # Added to fix the mistakes of transport of myAST resulting from the use of deprecated SSL 2.0 Mobile Security.

  # The following has been added to activate the reverse proxy requests from users of WLS 12 c-based applications.

  #-8002 port = SSL listener for api.astcorporation.com (managed server)

  # - the port 443 = SSL listener for myast.astcorporation.com (managed server)

  #

  # Phases of deployment:

  API.astcorporation.com:8001/myast # (1).

  # VirtualHost (2) Setup / WeblogicCluster guidelines to register myast.astcorporation.com:443

  # 3-test api & myast

  # 4-regenerate private certificate + all certificates.

  # Minimum nonclustered directive specifies WebLogic IP + port.

  < IfModule mod_weblogic.c >

  WebLogicHost 192.168.1.43

  WebLogicPort 8002

  Debugging now

  DebugConfigInfo WE

  Newspapers/myAst12c_WLS_error_log WLLogFile

  WLS-JSESSION-ID WLCookieName

  < / IfModule >

  # Proxy request per path Note: SetHandler specifies the handler for the plug-in module for the Apache HTTP Server

  < /myast location >

  SetHandler weblogic-Manager

  ErrorPage http://www.astcorporation.com/services/middleware/Middleware_Services.html

  < / location >

  # Added proxy

  ProxyPreserveHost off

  #ProxyPass /api http://API.astcorporation.com:8001 / myast

  #ProxyPass /myast http://myast.astcorporation.com

  I found my answer after I posted.  I'll leave it here to help others...

  The list of all instances of Apache that were started

  • ' ps - ef | grep apache. "

  Kill the persistent process

  

• Satellite A200: Modem has an error 633: already in use or is not configured properly

  My laptop is A200-FE0.

  When I tried to make a dial-up connection, there is a window of error says:
  "Error 633: the modem (or other connecting device) is already in use or is.
  not configured correctly.

  When I test my modem by clicking the modem of the request under the Diagnostics tab in the modems tool of the
  The modem control panel, normally responds and seem to work
  correctly.

  When I test my modem using Toshiba diagnostic tools, it displays "pass" and I canhear the tone Dáil too.

  I tired to edition and reinstall the driver twice.
  But I can't make a dial-up connection and get error 633. I'm really upset about it.

  Please help me! Thank you very much!

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=27402

• error "data already in use"-SR1710NX

  model sr1710nx - XP Home Edition - version 2002 Service pack 3

  When signing as user limited an error message appears, and this occurs even when there is no other user signed in

  ERROR

  Data already in use

  The data required by Compaq connections are always initiated by the user

  Owner of Compaq.

  You wish to proceed here close the other session?

  You can then choose

  Proceed here to the place or output

  Either one you choose closed the box and then you can proceed.

  It's rather boring!

  Thank you

  "Compaq connections" are a service that automatically sends you to support the information, advice, ideas and special offers specifically designed for owners of HP/Compaq desktop PC HP and our partners. " It can also deliver online surveys that provide feedback to HP.

  Connections of Compaq is not necessary. Disable it.

  Disable "Compaq Connections" by using the MSCONFIG Utility.

  Click Start > run > then type "msconfig" (without the quotes) > click on the Startup tab.

  Look for the entry of Compaq connections and uncheck the box

  Reset

  Note: When restarting, you will get a notice that you have used the system configuration utility to change your system settings, just check the box that says "don't show this message again." (It will go away on its own after a few restart.)

• Impossible to activate my error 0xc004e003 win 7

  my computer was starting to become slower at some point, so I decided to make a clean windows installation.

  the sticker on the side of my pc is completely cleared out and unreadable, so I used a program to detect my product key.
  but after installation, whenever I type in my product key is not accepting it.
  There is not activate by telephone option, I also tried a cmd elsewhere I found on the forum and then rebooted twice and it didn't work.
  I also downloaded the MGA diagnostic tool.
  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation code: 0

  Validation caching Code online: n/a, hr = 0xc004f012

  Windows product key: *-* - 73CQT - WMF7J-3Q6C9

  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG

  Windows product ID: 00359-OEM-8992687-00010

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.1.7601.2.00010300.1.0.003

  ID: {9E6BA3AE-4CC4-4322-9DD6-164CD625BE18} (1)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Home Premium

  Architecture: 0 x 00000009

  Build lab: 7601.win7sp1_gdr.130318 - 1533

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->

  Office status: 109 n/a

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {9E6BA3AE-4CC4-4322-9DD6-164CD625BE18}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-3416438033-3394941761-905934286Hewlett-PackardG5130nlAmerican Megatrends Inc.. 6.10 20100702000000.000000 + 000CFC93B07018400F404090409W
  . Europe Time (GMT + 01:00) Standard03HPQOEMSLIC-CPC109  
  Content Spsys.log: 0 x 80070002
  License data-->
  The software licensing service version: 6.1.7601.17514
  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-1033-7601.0000-2022013
  Installation ID: 011313103431140965331025336953077985940426971164982502
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: initial grace period
  Time remaining: 42960 minute (s) on (29 day (s))
  Remaining Windows rearm count: 3
  Trust time: 21/07/2013-17:14:31
  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  --> HWID data
  Current HWID of Hash: LAAAAAEAAAABAAEAAQABAAAAAgABAAEA6GEyCC7gnnXSQIAg6J6ESX4tGHk =
  Activation 1.0 data OEM-->
  N/A
  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  SRAT AMD FAM_F_10
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  LASRYVITRAGE HPQOEM SLIC-CPC
  SLIC SLIC-CPC HPQOEM
  SSDT HPQOEM SLIC-CPC

  Windows product key: *-* - 73CQT - WMF7J-3Q6C9

  The key in the report in the report is key OEM SLP used by HP to install Windows. It won't work if it's the key that you have detected with the key finder. You need the activation key that was on the COA sticker to activate Windows. If you are unable to read the key, you need to restore the windows of the building in the recovery partition which should be on the hard disk. If you do not have the recovery partition, you will need to buy Windows.

  Here's a similar thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-not-genuine-build-7600/ca05a74b-857d-e011-9b4b-68b599b31bf5

• Impossible to activate VIsta printer sharing

  Any ideas why I can't activate printer sharing? I have a HP932C printer attached to my Vista computer I want to share on my home network. Whenever I have activate printer sharing and 'apply' I get an error message 'the printer settings could not be saved. Could not be achieved. "Error (0x0000007a). I checked the firewall and the printer and file sharing is checked. Thoughts?

  In the networking and sharing;

  1 is your network set as Public or private? Public restricted the discovery and sharing of settings... Private (home or office} allows full of discovery and sharing, but is more vulnerable, unless a good security is used (encryption key, modem NAT or router). Home networks are usually defined as private. Across your network name, click Customize to change the Private setting.
  2. just under Customize, click State view. To the local connection status area will go up. Click on properties. Is file and sharing printers for MS Networks listed and checked? If it is not installed and checked, you can not share.

  Also, is there a password on the account? Vista requires the sharing plan.
  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. Click Start
     The collapse of this image to develop this image , type msconfig in the box start looking for and then press ENTER.
     The collapse of this image enlarge this image

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. On the the general tab, click on Selective startup.
  3. Under Selective startup, turn it off box load startup items.
  4. Click on the Services tab, select him hide all Microsoft Services check box and then click on Disable all.
  5. Click on OK.
  6. When you are prompted, click on restart.

  After the reboot, see if you can share it.

  Also try to activate the 'Administrator' account and try to share from there.

  Also try turning off firewall cand completely Windows Defender.

  ~ Engineer Support Microsoft Scott answers
  Visit our Microsoft answers feedback Forum and let us know what you think.