Analysis of file

Similar Questions

• Any info on a file 'nicco.dll '. He appeared on an analysis of file system Dell as "unsigned".

  Any info on a file 'nicco.dll '. He appeared on an analysis of file system Dell as "unsigned".

  File name: NicCo.dll
  Product name: Intel(r) Network Interface Card CoInstaller
  Intel(r) Network Interface Card CoInstaller Manager

  You can check the Dell website to see if there is a newer driver.

• Adobe speech analysis exports files .avi cineform instead of a text file.

  I have install gopro studio to get the available for first cineform codec.

  I also installed new languages for speech analysis (international English).

  Now, when I try to do the analysis of speech, Adobe premiere opens Adobe Media Encoder and it exports a cineform .avi file in a temporary directory. But I have no text inside the first or anywhere else. And the .avi file does not have a show anywhere.

  Is quite strange.

  What's not?

  Thank you

  Discourse analysis has been discontinued for CC.

• Need help: loop of pl/sql with UTL_FILE reading and analysis of file text 2

  Hello, I am working on a new project using the UTL_FILE utility in oracle 11 g. and I was wondering if someone could help me with a pl/sql code, I can't understand.
  My goal is to open and then read a Type_de_fichier file1.txt
  copy a specific paragraph of the file1.txt where
  the first word in a specific line in the file1.txt starts with "foo" then when the last word in fichier1.txt ends in 'ZEN'
  write to file2.txt only the analysis section in my where statement.
  I don't know if it's possible, but any guidance will greatly appreciate!
  
  My code example:
  
  CREATE OR REPLACE PROCEDURE my_app2 IS
  Utl_file.file_type inFile;
  OutFile utl_file.file_type;
  buffer VARCHAR2 (30000);
  BEGIN
  -Open a file to read
  InFile: = utl_file.fopen ('TEST_DIR', 'mytst.txt', 'r');
  -Opens a file for writing
  OutFile: = utl_file.fopen ('TEST_DIR', "Out.txt", "w");
  
  -Check the file is open
  IF utl_file.is_open (InFile) THEN
  -lines in the file in loop
  LOOP
  BEGIN
  UTL_FILE.get_line (InFile, buffer);
  -Write to out.txt
  UTL_FILE.put_line (OutFile, buffer, FALSE);
  UTL_FILE.fflush (outfile);
  
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  EXIT;
  END;
  END LOOP;
  END IF;
  UTL_FILE.fclose (INFILE);
  UTL_FILE.fclose (outfile);
  EXCEPTION
  WHILE OTHERS THEN
  RAISE_APPLICATION_ERROR (-20099, "UTL_FILE Unknown Error");
  END my_app2l;
  /

  Hello

  According to the code should work-

  CREATE OR REPLACE PROCEDURE my_app2 IS
     infile              utl_file.file_type;
     outfile             utl_file.file_type;
     buffer              VARCHAR2(30000);
     b_paragraph_started BOOLEAN := FALSE; -- flag to indicate that required paragraph is started
  BEGIN
     -- open a file to read
     infile := utl_file.fopen('TEST_DIR', 'mytst.txt', 'r');
     -- open a file to write
     outfile := utl_file.fopen('TEST_DIR', 'out.txt', 'w');
  
     -- check file is opened
     IF utl_file.is_open(infile)
     THEN
        -- loop lines in the file
        LOOP
           BEGIN
              utl_file.get_line(infile, buffer);
  
              IF buffer LIKE 'foo%' OR b_paragraph_started
              THEN
                 --write to out.txt
                 utl_file.put_line(outfile, buffer, FALSE);
                 b_paragraph_started := TRUE;
              END IF;
  
              IF buffer LIKE '%ZEN'
              THEN
                 b_paragraph_started := FALSE;
              END IF;
              utl_file.fflush(outfile);
  
           EXCEPTION
              WHEN no_data_found THEN
                 EXIT;
           END;
        END LOOP;
     END IF;
     utl_file.fclose(infile);
     utl_file.fclose(outfile);
  EXCEPTION
     WHEN OTHERS THEN
        raise_application_error(-20099, 'Unknown UTL_FILE Error');
  END my_app2l;
  /
  

  What I've done here is added a new Boolean variable. Loop in each iteration after reading one line, we check if the line starts with "foo". If yes then set the Boolean variable and writing out the startup file until we get a line that ends with "ZEN." That way even if there are several paragraphs in an input file starting with foo and ending with ZEN, then those should get copied to the output file.

  Hope this helps,

  -Gregory

• The analysis of file and Table

  Hello

  Part of my current work with LabVIEW, I need to analyze a text file to get values of data for further processing. The file contains data in the following format.

  Data1, Data2 / / comment.

  For treatment, his need the Data1 Data2. How can I extract these information one by one from the file without comment.

  Please comment on it.

  -mfp.

  Hi John,.

  Like this:

  

  There are other ways too for sure...

  And Yes, please indicate threads with more or less the same topic...

  In the original thread that you asked for the review, now you request the data. You can get the comment by developing the IndexArray function to get the 2nd column.

• Why is my Windows fax and analysis missing file?

  I can't send a fax more.  I've looked everywhere in my computer and printer don't files now no way to fax. Printer is a HP all-in-one and is supposed to send faxes. Computer has pci soft modem and braodband connection.

  Hi Viv27,

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/3ba1dd59-3cfc-40D6-ab4e-be43c53c601a

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The analysis of file for the source files

  Hello
  
  
  
  I need to analyze the specified source file to extract all files and processing them in the order (launch a script on the file). I have a feeling it's possible via Jython or Shell scripts (Source file is located on the Unix machine). But as I have never Jython, I wish I had some advice how it can be done.
  
  
  
  Thanks in advance

  Hi Shamil,

  Let's get this straight: you call a scenario for each file in a folder, right?
  I believe that the best way to solve that is the case:
  (1) you must load the list of files in a directory (dir or ls, as the operating system) in a temporary table. In this case, you run the command output to a text file (dir / b > test.txt) and then load that file into the temporary table.
  (2) once you create an ODI procedure would then name the source that you select a file in the temporary table and the target, you call the script, the name of the parameter file.
  (3) in the Datastore ResourceName put the variable that will receive the name of the file.

  I hope I helped

  [of]

  Mateus Balen

• Cannot enlarge the thumbnail view in my analysis of file

  The thumbnail views are 10 across the page.  You will have to show all my scans of large miniature views.

  (1) download and install the free Win XP PowerToy TweakUI.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows XP downloads
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP
  (Search for TweakUI featured downloads tab)

  When the program is installed, open it and go to...
  Explorer / thumbnails... to change the quality and
  maximum size of 256 pixels.

  (2) If you download and install Windows Live Photo
  Gallery... He has a slider that allows the size of the thumb
  adjusted tbe nails.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Live Photo Gallery 2011
  http://explore.live.com/Windows-Live-Essentials-Photo-Gallery-get-started
  (There are other apps when you)
  install... uncheck those you don't want to)

• Analysis of system files revealed corrupt files

  Last night I helped all right and when we restarted I was not able to return to my Tech, tech next ha
  very little knowledge and we d deadlocked. I finished the first tech had been asked to do and the result of analysis of file system was that I corrupted files that were present. I have now nheed help to clean up these files and help get the right driver for the construction in the HDMI Port on the MSi - Windows 7. Only ten minutes ago, I had a memory dump.

  IF you mean the auditor of file system (CFS), your next step is to uninstall the Windows Update KB3022345.  If it is installed it will cause SFC produce this message in all cases.  If you need help on how to remove it, just ask.

  Regarding the drivers, still go on the web site of OEM to get.

• Impossible to import the bookmarks file (file is JSON or HTML)

  Recently, I reformatted my laptop with a friend (works in), and from what I remember, he saved bookmarks via the function "import and backup / Backup".
  When I went to import back into Firefox, and I sailed to the location of the file, it was apparently not recognized because it does not appear in the folder, in that I know that it is. While in this process, I noticed also that Firefox is either looking for a JSON or HTML file. When I looked more closely the backup file, I noticed that it doesn't have a file extension. When I looked at the properties of the file, it simply says "file". I went online looking for an online tool to identify the file and found TrID (http://mark0.net/onlinetrid.aspx/). When I ran across this identification software all that I got was:

  "The file appears to be crude/ASCII text. TrID is best suited for analysing binary files! »

  As I don't see any option in Firefox to load this file type, I wondered what could have been hurt during the backup process.
  I was able to open the file in Excel (just a hunch because it "seemed" be a text file based on the identification of online files). The file opened, useless of course, but at least it seems that the file is not corrupted in any case.

  Please could someone help me with this? I have all my links job search in this backup, and it would be a ton of effort to recreate all this!

  My Info:
  Windows XP Home Edition, SP3
  Firefox 14.0.1

  Hi cor - el,.

  Thank you! That solved! I remember years ago with a similar situation, but not Firefox and I thought to try this thing... but I guess I'm getting old... Laughing out loud

  Once again, thanks a lot!

• How to extract specific data from a text file

  Hello world

  For my project, it is necessary that a parameter file is read at the beginning, so that variables be initialized with specific values that change with the user.

  For now, the mode of action is as follows: the values in a sequence specified in a text file are read and saved in a table and the elements of the array are extracted according to their index.

  The problem with this implementation is, that if for any reason any changes file format, for example we want to use a settings file from a previous version of the program, which has the values for the variables of same but in a different order, the only way to have good values for the parameters is to change everything accordingly which is really time wasting.

  Could someone suggest another implementation that make reading the different values independently of their order in the file, for example by analysing the file for specific strings and by reading the value after the string?

  Thank you very much.

  P.S. I've attached a screenshot of the routine, which I use now.

  Hi panagiov,

  Find attached files.

  Method 1: in this you can search for each variable separately. You can use "Live Config file" to get all the keys (variable) at a time, and then you can use for loop to get their values. Or you can access values as indicated in the present code.

  Method 2: Here you will have all the data at once. You will get variables and data (table 2D), you should look for the variables as needed.

  I hope you understand these methods.

  Good luck

• Analysis of chain to get the Timestamp, LV 2012 problem

  I have a VI I wrote in 2013 LV where it works very well.  But with the same VI in LV 2012SP1, analysis of string to get a Timestamp does not work.  Attached is the VI recorded in LV2012 SP1.

  Background:

  I work with an FPGA where I am synchronizing pulses using the clock of 40 MHz.  I connect these impulses in a file on my host PXI. To correlate the clock on the FPGA with a log file and real life someday, I named the file with a timestamp, and the meter 64-bit encoded hexadecimal string.  Now, I have a pretty good correlation between when the 64-bit against him and the time of day to facilitate the search of the data file.

  Now, I try to analyse the file name, so in my analysis of code I can reassociate the value 64 bits with the time of day using the string functions to separate the file name.  With a few regexes (which I've never used in real life before), I've broken down the chain and got the base time as a timestamp, and the counter value as a 64-bit integer.  The VI works very well in 2013 LV.

  But when I saved it to the LV 2012, analysis of string to get the timestamp fails.  No error, but the timestamp shows 19:00 12/31/1599 (I am GMT - 5).  I have no idea why.  A bug in the parsing of the string that was set in 2013 LV?

  Please run the attached VI in LV 2012.  Confirm if it fails for you.  Then open it in 2013 LV and see if it works for you.

  I am trying to make it work in LV 2012 because this project is locked in this version of LV for now.  I can probably do something to reorganize the time string to get something that will scan a digital time stamp if I have to.

  Hi Bill,

  Sorry to be a bit late on this point, I just came across this thread after the hunt for the CAR for a separate issue. The fix for 300375 CAR is what causes the difference in behavior between versions of LabVIEW. It appears on the list of known issues of LabVIEW 2013, although the description focuses more on the fixed number than other possible differences between the versions.

  The thoughts in this thread died on what happened in the difficulty. LabVIEW 2013 now pick up the string of year 2 or 4-digit number when you use the %y or %Y tags, respectively. Previously, the behavior was more forgiving in the year format, leading to incorrect behavior that you have observed strings of 4 digits in the year the %y tag. The original problem, you pointed out (2012 incorrectly string manipulation of tagged %y (2 digits) 2-digit year is precisely what has been fixed in the CAR.

  Regarding your strange result over the years with the tag %Y-2 digit, this is a limitation of the type of data Time Stamp itself. The year will always be converted to between 1600 and 3000. So no time extreme travel journaling. Yet.

  See you soon,.

• SUSPECT in Quarintine file

  After a comprehensive analysis, this file was Quarintined: win32/vb! ceubie. Search Web revealed no results for it. I tried to submit the safety laboratory nothing helps. I can't find any info on this suspicious file in the Microsoft Data base, and it continues to exist in my quarintine. Does anyone have an idea?

  File: win32/vb! ceubie

  Are you referring to Microsoft Security Essentials? If so, post in the MSE forums:

  http://answers.Microsoft.com/en-us/protect

• I had problems with my gc, cleaned and he is now allowed outside my control file system system, that it will take place at 68% and stops running

  I had problems with my graphics card cleaned and it works well apart from the system of checking file system on C: turns 68% and stops. If I have to cancel the computer checking seems to work ok, or is it?

  I guess that Mark_S_Sloan is talking about chkdsk /r or running a disk check with fixed error on a restart. so I would say that what I used to say the performance is chkdsk:

  The chkdsk/r can take a long time to complete depending on the size of the volume, the amount of data on the volume, the speed of the system and what chkdsk is to do.  It take about 2 hours for chkdsk/r run on one of the volumes of my1TB (I'm a right that I rarely run).

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.  Give him a chance.

  @Imran M - Microsoft technical support engineer:

  Don't you know that the performance of the auditor of the filesystem (sfc/scannow) does not provide a percentage of completion?  Have you ever used it?

  He also really tell you anything about what he did, or could have done when it is executed even if she finds something to do.

  Everything you see in the Event Viewer system log are messages like this:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64016
  Analysis of file File Protection Windows has been started.

  .. few time later...

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64017
  Windows File Protection file analysis completed successfully.

  Even if sfc/scannow find something to do, you will know about it, because it is not connected.

  That's why use sfc/scannow still more of a waste of time.

• malware has damaged, is there a system to SP3 File Checker

  This would be true practice to add to the difficulty It Center. Most of the people not the SP3 update online and the their CD SP2 System File Checker will not work.

  Specifically, all my USB drives will launch is more like a real storage unit unless I restart the computer in the diagnosis of msconfig startup.  I have various blue screen of death crash, especially when the search indexer is running, or the computer launches a windows update.  There were several problems of malware found by a number of cleaning products, all are now indicating a clean computer, but the damage is done.  SFC SP2 indicate a number of places during the scan, he wants to get a new file from my XP Pro CD, but does not recognize the CD as the current operating system.  I expect that new operating system would have a procedure to check and repair/replace its files.

  Your expectations exceed reality.

  If you reinstall XP and then download and install SP3 and then reinstall all your apps again and then restore your backup of the data, you still won't be able to run sfc/scannow, use your SP2 CD in the future.

  The best option is if you have a genuine XP installation bootable CD with a plu SP is to do a new installation CD that has SP3 'slipstreamed' inside so what comes out the other end is a new installation of XP you create will be integrated into SP3.  You must already have a genuine XP bootable installation CD to do this.

  What you end up with is a XP installation CD with SP3 integrated into it (and you can book your old version).  Which will make happy sfc/scannow, sfc/scannow is not for fixing problems on a system.  sfc/scannow is designed to run only once when you install XP to populate the folder dllcache with a list of 3498 system protected files which are backups in the case where a protected file come missing later on your system.  That's what all this.  It is not to solve problems, unless your problem is that your dllcache folder must be updated, or your problem is you have too much time and need to lose some of them.

  Here's a method that works the first time if you follow the directions:

  http://www.bleepingcomputer.com/tutorials/slipstreaming-Windows-XP-to-create-bootable-CD/

  Here's another:

  http://Lifehacker.com/386526/slipstream-Service-Pack-3-into-your-Windows-XP-installation-CD

  If you do a search on Google for something like:

  Slipstream XP

  you will find other methods.

  If you run sfc/scannow to completion and you have all the pieces in place, it should find nothing to do.   It ' feels 'good when it is running and can't find anything to do well. "

  However, even if you break your system on purpose to remove or damage a file in the dllcache folder and sfc/scannow is a file in the dllcache folder that needs to be replaced and replace it (it IS what it is), you won't know about it since the only thing you will see when the Observer newspaper is that :

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64016
  Analysis of file File Protection Windows has been started.

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64017
  Windows File Protection file analysis completed successfully.

  Even if sfc/scannow finds something to do, you will never know about it.  It is not his goal.  Its purpose is to populate the dllcache folder.  In the above example, sfc/scannow replaced the 2 files that I've damaged on purpose for a mission of training and test, but you won't see anything about this in the case where log Viewer.

  When you did, come back with your other questions and we can see i we can solve.