SUSPECT in Quarintine file

Similar Questions

• Slow extreem Windows Explorer with a right click on the name of the file

  My Windows Explorer is extremely slow when I right click on a file in there. But only when I have the network connection is active.
  I found the reason that on the MS page http://windowsxp.mvps.org/rcdelay.htm but I can't apply the Advisor inside. It shows a very old version of RegScaner and when I run it I get a lot of folder of registry which begin by-string. I'm afraid of making a bad choice!

  It would be nice if someone could guide me on this matter, please!
  Everything that happens on the Dell Latitude D620 with Windows XP SP3.

  PIKO

  You probably don't want to disable one at a time.  Try groups of 20 or 30 at a time.  I'm not sure you need restart between trials.  Some extensions of the sample I tested were immediately disabled and right click on a file did not show the options for this extension.  It wouldn't surprise me that you will not be able to disable each extension.  Work with those that you can and see if something helps you.  Look in the 'File name' column and suspect that any file that begins with "------" or a drive letter that does not correspond to a hard drive on your system.

  If you do not want to use RegScanner, do the same with Regedit.  Run Regedit (start-> Run-> 'regedit'), simple click on 'My Computer' to select it, make an edition-> find, enter your------the field search and click "next".  It stops at the next occurrence.  Press the F3 key to find the one that follows after that.  I think you will find that there are many references to '-', some occurring in places that you probably want to touch.  Unless you know what you're doing, editing the registry can be dangerous.  Always back up the registry first before making any changes.

  HTH,
  JW

• Windows media player; I have a mpeg file played ok before the download Flash Player to move to another place; but now the audio wont play even if the video is very good

  I have a mpeg file played ok before the download Flash Player to move to another place; but now the audio wont play even if the video plays very well.  The mpeg file may was converted from another format mpeg before do me.

  Hello

  1. are you able to play the other mpegs successfully?
  2. what version of Windows Media Player do you use?

  I suspect that the file is corrupted.

  Method 1.
  Check if you can play the same video in a different media player.

  Method 2.
  You may need to check if the codecs work very well to play the file. Check if you have installed third party codecs. Uninstall them and re - install and then check.

  I hope this helps.

• Says the file is not indexed and cannot be imported. ___

  Hello, I am very new to this and get the above message.  I am trying to import WMV files.  I changed the format to MOV with format factory although the video would play in Movie Maker he had no sound with the MOV format.  Now, I can't even import the file.

  Hello, I am very new to this and get the above message.  I am trying to import WMV files.  I changed the format to MOV with format factory although the video would play in Movie Maker he had no sound with the MOV format.  Now, I can't even import the file.

  ======================================
  I suspect that the file is corrupted or damaged in some way...
  It was probably a problem with the MOV file before
  He converted.

  In many cases, I found that convert a. WMV file
  to the. WMV format could produce a new version of the
  compatible file. Sounds redundant, I know, but it
  can work.

  Microsoft Expression Encoder 4 can perform the conversion.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601

  Also... it can depending on the version of Movie Maker...
  help to go to... Tools / Options / Compatibility tab and left
  Click the restore all default settings / OK.

  +++

  If you want to try Expression Encoder 4 following
  info can be useful:

  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  Left click (highlight) the. Left and WMV file, click the Open button.

  You will see the file in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

• Why is my defrag program reported a very large number of files not movable?

  most of these files appear to be located in c:\system volume information and 25 system files.

  I suspect especially two files \windows backup and \windowsimagebackup. Cannot access this last all as my administrator privileges do not appear to be good enough. Remove the statement are not so much denied as totally ignored. backup Windows does not recognize filed.

  a screen CAP is lower with arrows indicating the files not movable.

  Obviously, the free space on the drive is defragmented seriously, but not movable files prevent further action.

  anyone can shed light on this apparent conundrum?

  This problem has been resolved by deleting all restore points.

• Problem of blackBerry Smartphones in the e-mail attachment .csv file download

  Hello

  I'm having a problem to download the attachment through .csv file. Can someone help me?

  As I suspected, the CSV file format is not supported.

  Read this for reference:

  http://www.BlackBerry.com/BTSC/KB03265

• The network drive log file

  Hello

  I have a small business server, which is run through a network with thousands of files on as drawings etc.
  I have an employee who I suspect may copy files to our server for small businesses and keeping them to use in/when he left the company, then potentially to poach customers.
  I was wondering if there was anyway to get a log file which files are copied to the server just so I can make sure that this happens?
  Thank you very much.

  Server gurus all spend time in the TechNet forums, could ask them better.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• Why Acrobat Pro DC hangs up after that Create begins to open the source Word file?

  Why Acrobat Pro DC hangs up after that Create begins to open the source Word file?

  I tried. He created a satisfactory smaller file. After discussion with a colleague, I suspect that the file is too big for my laptop to face. My solution is to go to a specialist agency to do the work. I'm happy to close the investigation.

  Sent from my iPad

• highest average quality to edit dv files

  I have in.dvformat a lot of home movies and change, then transcode h. 264 for distribution. I suspect that the files are intertwined - but don't know how to say. How I change them while maintaining the best possible quality?

  Thank you

  Without knowing how you have created the files, I THINK they are standard definition... but it's perhaps wrong, according to what you used... so the process of NEW ELEMENT will allow the camera body create a project based on the file

  CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 has many links to help learn

  -including a link to learn more about the process of a NEW ELEMENT, with an image in the link you show what to do

• Files of the Update Manager (download patches) eat space on the system drive. Need a way to migrate the files to another volume.

  I am using vCenter 5.1 U3 with Windows 2008 server R2 edition. C: drive have 64 GB, but most of the time get alert as C: drive is full. When I checked that the folder "Program Data" Update Manager from the c: server busy more than space. I suspect that download files eat my space.

  is it possible to change the location of the download files?

  Hi Mike,.

  To change the default download location:

  1. open the vci - C:\Program Files\VMware\Infrastructure\Update Manager\vci integrity.xml - integrity.xml.

  Note: In 64-bit Windows, the default file location is C:\Program Files (x 86) \VMware\Infrastructure\Update Manager\vci - integrity.xml.

  Search for patchStore.

  C:\Documents and Settings\All Users\Application Data\VMware\VMware update Manager\Data\

  Note: Your new directory is empty and contain valid metadata. Copy the data from the old directory, or run the update vCenter Update Manager download.

  Replace the location with the favorite place.

  Save and close the file.

  2. restart the VMware vSphere Update Manager Service.

  I hope this helps with your problem.

• Suspected malware in the form of Adobe Flash Player install crib

  I believe that I have installed a few malware disguised as an update of Adobe Flash.

  I may have made on July 11, 2015, in response to a pop - up in Firefox 39.0.

  My computer shows symptoms of malware. Looking into the problem, I discovered on the 'Flash' malware on the Apple support page https://discussions.apple.com/docs/DOC-3122.

  You are invited by reading that, I searched my system and found a file I think. When I search my Applications folder by using the term "flash," I see an instance of AdobeFlashPlayerInstallManager.app version 18.0.0.209, copyright 2008. It is installed in the Utilities folder. It was created on my Mac on July 11 and amended July 14, which would be consistent with the time period where I now remembers seeing the context menu of browser who said that I was using an outdated copy of Flash.

  Now, I'm trying move the suspect Flash application file to the trash. When I right click and select move to trash, I get a Finder window asking my computer password. Should I do this? If this is not the case, how to remove this suspicious file?

  Please let know us also on all the other steps recommended recovery.

  I learned the lesson is not to update software through pop-up windows in the browser.

  Attach a screenshot of the window read the information of the suspect file.

  Thank you

  Marie Brisson

  

  Hello

  Flash Player creates the AdobeFlashPlayerInstallManager.app in/Applications/Utilities /.  You can check if it is a legitimate "Adobe" file by checking the signature on it.  To do this, follow these steps:

  • Start Terminal.app From/Applications/Utilities
  • At the prompt, type: codesign vdv - Applications/Utilities/Adobe\ Flash\ Flash Install\ by
    • You can type codesign - vdv and then drag the AdobeFlashPlayerInstallManager.app file in the Terminal window
  • The results should have ' authority = Developer ID of Application: Adobe Systems, Inc.

  The reason why you're being invited, by the operating system, for the password is that the directory of the application has elevated permissions and to remove the file from her (or install) requires the admin password to make changes to the protected file system directories.

  Adobe has also released and updated Tuesday, July 14.  If you may have gotten a notification pop up as a result.  However, without a screenshot of the popup notification, I can't verify it was that, or something else.

  If you want, I can take a look at your FlashPlayerInstallManager.log file and see if there was an update around the time that this has happened. Please read the FAQ where can I find the Flash Player on Macintosh Setup log? for the location of the log file.  This FAQ contains several different log files, just look for FlashPlayerInstallManager.log and provide a file using the specified item was not found. instructions.

  Also, if you have not yet done so, you can run a scan for viruses/malware/adware/etc.

  --

  Maria

• 7 re: what is the location of the file of nuances in the part of illustrator to Adobe Creative Suite 3 Design Premium for windows product (date and time)? Drop it eat its funcionallity.  Thank you

  First posting: https://forums.adobe.com/message/6529108#6529108

  Support suggestion: the discussion is posting again to get the response from adobe staff

  ===

  Illustrator does not work as it should...

  I want them to compare the size and date of creation with what I installed on my original computer... I installed several times with my original CD and I tried once downloading the files from the adobe site (using my own license). I suspect that the files have been changed or renamed on my laptop by an unauthorized user external causing dysfunction of the application.

  Customer service does not support CS3 more and the updates / fixes in the adobe site does not solve the problem... They redirect me to the support forums...

  Currently, my problem is that after creating a swatch and drag it to the Group swatch, he does not like it needs a new form... Now, after deactivating and activating my license nuance seems to fill the new form, but when the filter sample's persistence in being created next fill even if a different color is used as a fill (X)... Aid for the creation of a shade over the internet just complicates the matter.

  This is why I would like to know if the updates on my product are received or files are overwritten without my knowledge...

  Thank you...

  PS Do you know how to contact an employer of personal adobe on the forums?

  I saw your post today.

  Move the file hosts on the desktop it will be part of a roaming profile?  It's means that activation will take place from any computer that are a part of my local network of microsoft.  How can I make sure that the program I have access is the one located on my local C drive and not in a roaming profile in may be an environment of Cloud Computing or unknown equipment with access to my network without authorization. I have only 1 laptop where locally install the suite CS3

  My host file has no entries on it and even when trying to copy the desktop, activation can be performed no, same problem.  There are days, I used the trial rather than the activation option, after trying to activate all of the product you mentioned in your response, other period to return to the original 30-day trial.

  Recently, I noticed that I have a roaming profile with a file of different workspace than I have on my local drive (3 files, Control Panel, and type base).  On the roaming profile, I see a directory for adobe illustrator CS3 settings------workspaces-file AIWSPrefs which has different entries that I have on the local drive.  Normally I don't customize much the workspace or safe the setting used, I load the brushes, shades, etc manually from the location, they are on my local drive if directories swatches and brushes on the roaming profile are empty instead. Adobe Kuler pallet and Eureka are on the local base folder not in roaming.

  The directories on my roaming profile are:

  Acrobat

  Adobe Illustrator CS3 settings

  Adobe PDF

  Adobe Photoshop CS3

  Color

  9 Dreamweaver

  Flash Player

  Fonts

  Headlights

  Linguistics

  Newspapers

  LogTransport2

  Save for the Web HAVE

  Updater5

  Workflow

  XMP

  Inside directory itinerant illustrator, the following files:

  Color settings to HAVE it

  AIAppResources

  AIMenuFaceCache

  AIPrefs

  Brushes

  Composite fonts

  Graphic styles

  IllustratorFnt.lst

  Kinsoku

  MojiKumi

  New Document profiles

  Cache.ARTX plug-in

  Plug-ins

  Print presets

  Save Web settings

  Color chart

  Symbols

  Aplatissements predefined transparencies

  Workspaces

  In the above scenario, what workspace and other files of functions will take precedence?  How can I avoid the roaming profile?

  Not being not able to copy the roaming profile on my local disk files, I was wondering how this roaming profile was created and why the files are there.   These files have a date of last month, local files have been installed most recently.

  Your comments will be appreciated at your earliest.

  Thanks in advance

• Cannot open .cp file in Captivate 5.5

  Hi all

  I shall now change more than 30 files with the extension ".cp" with Captivate 5.5 installed in my PC, the files are created in the year 2011 and possibility created using the previous version of Captivate.

  However he warned me that Captivate cannot open files

  

  As far as I know, Captivate 5.5 should be able to open the files of the previous version, I searched on the web and most of the responses refer to the link (http://www.infosemantics.com.au/adobe-captivate-troubleshooting/recover-corrupt-project) but I have not any locked backup or cache files, I suspect that the files are not damaged, since I couldn't open all the files.

  I would like to know if there are any suggestions for my case?

  Really thanks!

  5.5 or 5 can open files-cp normally if they were not damaged and do not use AS2. ActionScript 2 is no longer supported since 5. '2011' bit strange because cp-extension disappeared earlier. Are there no way to check in this ' earlier?

  Lilybiri

• MDUTIL t

  I have OS X 10.8.5 and noted the following message in the console log...

  10/02/2016 12:59:47.893 sandboxd [579]: mdworker32 (572) ([572]) deny mach-search com.apple.PowerManagement.control (import fstype:hfs fsflag:480 D 000 flags: 240000005E diag:0 uti:com.microsoft.word.openxml.document plugin: / library/Spotlight/Microsoft Office.mdimporter - find suspect using the file: sudo mdutil t 567061)

  Can someone tell me what the mdutil t tells me. When it is run it points to one of my own files, in this case one in the documents directory.

  Kind regards

  Martin

  This Doc opens in Word OK?

• Virus in official BIOS driver

  I downloaded * BIOS driver * of * official * Toshiba website for the download link:

  https://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20120814101902.zip

  (Redirected from here: https://www.toshiba.eu/innovation/download_bios.jsp)

  Here are the BIOS driver [VirusTotal report: | https://www.virustotal.com/en/file/394d02a0bc6763d60cf29e6f261c52b96a2195f8f55fa87e7f b31e04f83ada71/analysis/1421784797 /]

  As you can see, 3 (Comodo, Trend Micro and AegisLab) antivirus programs reported the file as * suspicious * / * Trojan *.

  The file is the old version of the BIOS (v1.60), the most recent is v6.80. It is * not * digitally signed *. I accidentally it linked my laptop (I have the latest BIOS version already installed, so when I ran v1.60, it seems that there no install, just shown popup, something like "new version already installed").

  Questions for * certified * technicians Toshiba * (I want to * official response *):

  1. maybe that's just a * detection of false positives *. You can * GUARANTEE * this file is * CLEAN / VIRUS FREE *?

  2. if * virus * how * disinfect * my laptop? Do not forget that if it's BIOS virus I could eliminate it that by flashing the BIOS, but how when my BIOS of the laptop only comes with the .exe file (there no. ISO file to burn CD BIOS and it is not possible to Flash the BIOS within Windows, because I already have the latest version, or you know a work around for this?). Opening laptop is also impossible, because it is under warranty.

  PS: I have already contacted the companies mentioned antivirus (submitted suspect BIOS driver file). I'll post their answers.

  > Questions for technicians certified Toshiba (I want to * official response *)
  So please do not expect here to answer on the user forum.
  Visit http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/ and you will find Toshiba SPAS in your country. Contact the closest to the ASP and tell them what you want exactly.

  All available drivers are put to the test, but you can specify everything with ASP from Toshiba. If there is a problem, they can contact Toshiba and clarify this issue.

  I'm 100% sure that you are not the first or the last person who has updated the BIOS with this version.

  By the way: what model of laptop you have exactly?