malware has damaged, is there a system to SP3 File Checker

Similar Questions

• I can't run all the files on my computer it shows either a spyware or malware has infected my computer

  I can't access any of my files on my computer anymore and I saw some pop on my screen that my HDD has damaged cluster and the RAM memory is extremely low... I do not remember to do anything on my computer to cause this problem, so I've read things about her and figure that maybe it's a malware o spyware but still I can not understand a thing about this and how to solve this problem, I was also wondering if I could still access my old files if I get my system working again... Thank you for any response I can get from this post... It would be a great help :)

  Hello

  What is the exact error that you receive when trying to open any file?

  Step 1: Virus or malware scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356

  Step 2: Check the problem in safe mode and after the same return.

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:

  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Remote procedure call (RPC) - how can I determine if a person has been access to my system remotely? I think someone is.

  I think that my computer is accessed remotely, files and emails being read. I disabled remote access in the Services section and have also disabled Mobile Sync; I did not use one of these services.

  When I took the remote procedure call (RPC) service and open the properties, the logon tab has the section "This account" clicked, "Network Services" typed in the box and a password. I can't change anything on this tab properties. I can't disable the service or disable the 'unattached profile '. How access to this service to make changes and more importantly, how can I confirm that someone logging into my system to remote and checking e-mails, files, etc.. This isn't a networked system, it's my computer in my home office. I am running Vista Ultimate.

  Thanks in advance for your help anticiapted.

  Hello

  Ultimate also has group policies that you can set to lock the machine - GPedit.

  Management of Windows Vista Group Policy (part 1) - see links to part 2 and 3
  http://www.windowsecurity.com/articles/managing-Windows-Vista-Group-Policy-part1.html

  Don't forget someone might access your email on the server, so do not forget to set a new password.
  As someone else has physical access to the computer?

  System Services stop isn't really the best/correct method to ensure safety.

  1. make sure that the system is free malware:

  Do a thorough check of the malware as no program detects and removes everything. Easy to find addition
  Malware is often accompanied by more difficult to discover and remove the payloads. Better to be cautious
  now that suffer the consequences later.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  =======================================
  =======================================

  2 configure security - get a router with a built-in hardware firewall to add to your safety.

  Check with your router manufacturer and their forums because they usually have great information.

  Better to use WPA/WPA2 security if they are available and you can hide the SSID that will help
  help others to see the network (note on some routers more hide the SSID)
  causes of connection problems and if they find out the name he is more useful).

  Wireless network general recommendations of security for individuals
  http://theillustratednetwork.MVPs.org/LAN/SoHoWirelessSecurity.html

  Introduction to wireless network security
  http://netsecurity.about.com/od/Hackertools/a/aa072004b.htm

  10 tips for Wireless Home Network Security
  http://compnetworking.about.com/od/wirelesssecurity/TP/wifisecurity.htm

  Securing your wireless network
  http://www.practicallynetworked.com/support/wireless_secure.htm

  How to secure your router Linksys Wireless - similar can be used for other routers
  http://www.pctipguys.com/index.php?option=com_content&task=view&ID=57&Itemid=36

  What are the different wireless network security methods?
  http://windowshelp.Microsoft.com/Windows/en-us/help/b385cc8a-AF25-489e-a82e-decf6df26b681033.mspx#EZB

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Software Distribution Service 3.0. my wallpaper, all my documents, my videos, my photos, my desktop shortcuts, etc. all gone. has had to do a system restore. How can I avoid this in the future?

  XP Professional 5.1.2600 Pack 3. Automatic updates are on. After that an automatic update on Mei and June 2012 identified as Software Distribution Service 3.0 my wallpaper, all my documents, my videos, my photos, my desktop shortcuts, etc. all gone. has had to do a system restore. How can I avoid this in the future?

  Software distribution service 3.0 is a system restore point, not an update.

  When an update is installed a SDS is created.

  To check the name of the update, go to the Microsoft Update Web site and check your update history, search for the date, that the error occurred.

  Also make sure that your system is clean:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  I guess 'Mei' is your abbreviation of Microsoft Security Essentials under your antivirus protection, is this correct?

  After return with answers to the questions and the results of the analyses.

• KB2446708 has downloaded on the complete system of 21 times on Win Vista 32 bit SP3

  KB2446708 has downloaded on the complete system of 21 times on Win Vista 32 bit SP3

  How does this apply to Microsoft Security Essentials?

  See http://answers.microsoft.com/thread/72c67372-e968-e011-8dfc-68b599b31bf5

  PS: There is no SP3 for Vista.

• the ibm product recovery feature has been removed from this system

  I have a thinkpad R51, and recently, I decided to reset to the factory settings. However, I also had installed linux and when I tried this it has failed and to restart, there was a grub error. As I was doing before, I put a CD in XP randomly and did a fixmbr, but this time, when I tried to restart the entire disk had disappeared. So now, windows no longer existed. Then I installed linux again and followed the instructions here: http://www.thinkwiki.org/wiki/Rescue_and_Recovery to allow grub to access the partition rescue and recovery and tried again.

  However, this time when I click on the "content of factory restore", all I get is a saying "the recovery of product feature ibm has been removed from this system"

  Is it still possible to reset this top of the Tower, or I have to install my own OS as if he is not a thinkpad?

  Thank you

  rolandFlagg wrote:
  What do you mean by "spare parts installation media? Do you mean buy a BONE altogether?

  Yes the commercial version of the XP operating system, you have the OEM version of the XP operating system.

• System Restore has been disabled by your system administrator

  Problem of administrater

  Hello all, I thought that my problem was a simple one but not so much. I am logged on as administrator Windows 7 Ultimate, I went to restore my system files and is turned off by mistake, while I thought was not a problem, I knew not that it deletes the system restore all files, so here I am again to make it back on and guess what, it is said that the administrator should be informed that they are off their After trying several ways to achieve this, I resorted to no protection on my UAC, it has not helped, tried a new UAC which did not help either, so now I'm on my hands and knees hoping someone out there can help, after such a simple mistake that I was allowed to do because I was Admin , I went to not even be able to system restore back on without contact my administrator! Is any way around this, there must surely be, any help would be greatly apreciated.

  Steve.

  Hi Steve,.

  Step 1: Use the Group Policy Editor

  a. Click Start, type gpedit.msc and press ENTER

  b. go to the following branch: Computer Configuration | Administrative templates | System | System restore

  c. double click on disable the Configuration and set it to not configured.

  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.

  d. Quit Group Policy Editor.

  If using the Group Policy Editor do not fix the problem, try the registry fix from the following.

  Step 2: Using the registry editor

  Important: The below mentioned method contains steps that tell you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

  a. Click Start, type regedit.exe and press ENTER

  b. navigate to the following key:

  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

  (c) in the right pane, delete the value named DisableConfig

  d. Quit Registry Editor.

  e. restart the computer and check

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Is there a system of electronic commerce, where you can transfer money to a bank account, rather than pay cash immediately?

  Is there a system of electronic commerce, where you can transfer money to a bank account, instead of paying the money immediately?

  It is about 6 trips (6 products) that my client has been designed to get as an e-commerce site, but travel is very expensive, it's too expensive to use paypal for example because they take so fresh (, for example a trip cost $2950, and paypal take fees of 2.9%, and if peopele 50 buy this trip--paypal will be 2.9% of the §147.500 - and it's a lot of money)

  So we look for an alternative.

  It could just be an e-commerce system, where the buyer choose their trip - and press 'buy' and then go all the way to the extraction and to pay - but then it would be responsible to transfer the money to a bank account, and when the money is transferred to the seller, the customer get their ticket.

  -What system of e-business I could use for this purpose?

  I look forward to hear from you!

  1: both forms will be probably different areas in order to tell them apart should not be difficult.

  2: in the properties of the form, name for example a Contact form and the other a purchase order.

  

• How do I know what version (update / output level) version 6 has been applied to my system?

  Question
  How do I know what version (update / output level) version 6 has been applied to my system? I applied several different publication levels to version 6 of FF, but all about feature tells me is Version 6.0. No version! This seems to be a change in the updates in the way which are managed. What is a distortion because of the speed in which you push updates and what's new?
  contact me if you need something more

  e-mail address removed

  For those who are in need of a photo/screenshot, see attachment below. Right click on the image below, choose "Open in New Tab", click on the image to open in the new tab to zoom in and enlarge the image.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Windows security - they have my computer was attacked by viruses and other malware, has offered assistance to the evaluation, indications of problems

  Received a phone call from an organization called Windows Security (or similar name). They advise that they have indications that my computer was attacked by viruses and other malware, has offered assistance to the assessment, problems, etc.  I went through a series of tasks that I believe that gave them access to my computer, but then got suspicious, and said I would call back. Given telephone number was (520) 720-0786.  Given names were Sean Wilson and Bryan Hussey.  Please indicate if they are legit, and if not, what can I do to protect myself?  Appreciate your help... Brian

  Received a phone call from an organization called Windows Security (or similar name). They advise that they have indications that my computer was attacked by viruses and other malware, has offered assistance to the assessment, problems, etc.  I went through a series of tasks that I believe that gave them access to my computer, but then got suspicious, and said I would call back. Given telephone number was (520) 720-0786.  Given names were Sean Wilson and Bryan Hussey.  Please indicate if they are legit, and if not, what can I do to protect myself?  Appreciate your help... Brian

  This is a complete scam.  You can report it to your local police.

  For your own protection, you should:
  • Change your passwords on email accounts, accounts financial and sensitive to which accounts you access online from this PC.  RIGHT NOW!
  • Run a full scan of your PC using your antivirus application...    Also download and run a full scan with Malwarebytes Anti-malware (free edition).  MBAM is a very good solution in addition to your primary backup antivirus/antimalware application.
  • I would also go here: https://www.microsoft.com/security/portal/Shared/Help.aspx and follow the advice of "I think that my PC is infected", including potentially calls MS help.
  • Above all, do not delay!  If you have any concerns about the handling of it, then disconnect your computer from the internet and call MS before anything else.

• my computer has sent me a message system error dthtml.exe what I would do. or the computer denies me ijl15.dll is missing from my system

  My computer told me that is missing on my system or systems error dthtml.exe ijl15.dll.

  Thanks, Kassie

  Hi Kassie,

  (1) what version of Windows are you using?

  (2) what is the complete error message you receive?

  (3) when exactly you get this error message?

  If you run Windows Vista or Windows 7 on the computer SFC scan and then executed.

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• last 10 automatic updates has not installed on my system; windows xp x 86 service

  last 10 automatic updates has not installed on my system; windows xp x 86 service

  jump,
  We could use a little more information.  What updates fail and the error codes are, to start.
  However you can check these links because they have some general troubleshooting steps that may help you.

  Reset the Windows Update components

  Solve Windows Update installation issues

  Troubleshooting Windows Update: offered on several occasions to update

  Last Windows Update Agent

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System Restore error: file spp.dll is not designed for windows or there is an error.

  Original title: download spp.dll

  My SPP.dll file is 0 kb.  When I try to access the system restore, it indicates that the file spp.dll is not designed for windows or there is an error.

  How can I get another spp.dll file? I can download one from the internet.  I tried but just keep getting a service offering public fixit. I bought RegUtility, but it did not fix the file.

  Try to run the System File Checker:

  http://support.Microsoft.com/kb/929833/en-us

• I am trying to add itunes to an old computer for my kids. It has the windows xp operating system. problem of Setup Windows how can I solve the problem?

  I am trying to add itunes to an old computer for my kids. It has the windows xp operating system.  When I try to install itunes, I get an error message that says: I'm having problems with my windows installer.  I don't have an existing copy of itunes on the computer that would be a new installation.   How can I solve the problem?  I have a new computer with windows 7 and had no problem with installation on it.

  If you can not receive answers that will solve your problem, I would suggest that repost you to...

  Cummunities to Support Apple - itunes for Windows:

  https://discussions.Apple.com/community/iTunes/itunes_for_windows

• Another version of microsoft visual studio 2008 has been detected in this system must be updated for sp1. What to do next?

  The complete error message that I receive is less when I try and install SQL Management Studio on a PC running Windows 7 64 bit running SQL Server 2008 R2. The only point is that Visual Studio is not installed then, how can I update something that is not installed in the first place. At the end of the day, I'm trying to install SQL Management Studio so that I can recover my backup of clients.

  Another version of microsoft visual studio 2008 has been detected in this system must be updated for sp1. Please update all installations of visual studio 2008 sp1 by visiting Microsoft update

  My mistake

  

  Programs installed

  

  Hello

  Please read the following support article:

  https://support.Microsoft.com/en-us/KB/956139

  Maybe you have the Visual Studio Tools for Applications 2.0 installed.

  In addition, you can get a quick response with SQL Server related questions in the following forum:

  https://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com