analysis of the error string

Similar Questions

• Express dialogue VI file modifies the error string

  Hello

  today I got a strange error message form the express VI of the file dialog box (with the name of the new folder dialog box):

  1055 error has occurred in the new folder dialog box-> check if the directory exists.vi-> configure the directory path.vi-> load PS config-> program.vi Triax file.vi

  Possible reasons:

  LabVIEW: Object Reference is not valid.

  After some research, I discovered, that VI is not the source of the error, it has just changed the information received from the error in terminal.

  Is this a known problem in Labview 2011? I have not found anything.

  The expressway screws work is that they generate a real VI that will be executed whenever you change the configuration and that VI is saved as part of the VI call. You can watch the VI generated by VI right-clicking and selecting Open the front panel, which will be asked if you want to convert. If you do this and look inside the real VI she calls, you will see that it performs an unconditional call for a VI that modifies the error string. I would say this call should probably not do if it the error was true, then I would call it a bug.

  In practice, I'd say the best option is to call the primitive file of dialogue yourself or call errors to merge and put the initial mistake of wire on top or wrap all express VI into a case of error structure.

• Analysis of the error in normal mode string

  Hi all

  Suddenly, my analysis of the chain has stopped working and started giving me this error. The read string ends up being something like 2.86E - 4 or similar. When I run mode highlighted everything works fine and it interprets the number very well but when he's not in highlight mode it returns an error. Not sure why since it is just a number to convert. Any help? I have attached the error and the highlight mode version. Thank you!

  First guess: synchronization problem. Especially since you said it works in highlight mode. Specifically, when you run culminating point mode you expect probably not long enough before trying to read, and the loop will immediately detect any byte on serial port. This delay function there will not guarantee a delay of 1 second between writing and reading. There is no dependence on the data - a rookie mistake. Use an image sequence or time to late VI to have clusters of error wiring through establishing the data dependence.

• analysis of the error of chain 85

  I can't using string function analysis. For some reason, I can't separate the channel number. I get error 85.

  %s will grab everything that, instead of enter the digits not followed by a number using the format string: % [^ 0-9] %d

• "The analysis returned the error 0XC00CE556.

  Original title: "Parsing returned the error OXCOOCE556.

  When I start my computer, I get 'Parsing returned error OXCOOCE556' several times. What is - this and how to fix this. I use Vista.

  Hi LouisVoorhies,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  It is sufficient to indicate the complete error message you receive.

  Method 1:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 2: Check the box next to Microsoft .NET Framework 3

  (a) click Start, click Control Panel, and then double-click programs and features.

  (b) click on Turn Windows Features on or off.

  (c) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) check the box next to Microsoft .NET Framework 3

  (e) click Ok, and then restart the computer

• Analysis of the errors with 10.6 and F2210

  I have a deskjet F2210 which works very well.

  With my old Mac Mini (G4 based) and 10.5, all the features work very well.  I just bought a new Mac Mini (intel based) with 10.6.4 and scanning always fails with "unknown error" before arrived at the end of the analysis.  Printing is fine.

  I deleted all of the HP software and reloaded.  The same problem.

  The F2210 works very well, because he still works with my old Mini.

  It will be unfair to scan with the new Mini and 10.6.

  Ideals I can do?

  Thank you!

  Kevin

  If you are using Snow Leopard and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the HP software on your Mac before you upgraded), you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• Installing a game gives the error "string was not in the correct format of entry."

  When I try to install a game, I bought recently, a small window appears with the text above. The only option left on the game window is to cancel the installation. After the cancellation, another window opens with 'there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your supplier of staff or the package of support ".

  I have no idea what past: what am I doing wrong?

  Batman Arkham City Game of the Year Edition

  Problem installing game...

  http://www.GamersGate.com/gametutor?issue=239191

• ANALYSIS OF the CHAIN fails with empty quoted strings

  I'm scanning a long text with the STRING SCAN line.

  

  "[My problem in the first place of this part: " [^] "]"

  The string I'm scanning a quotes in it - I want to extract the string in quotes as a single item.

  I can't use %s because the string can have spaces that it contains.

  The format string works fine except if the quoted string is empty ("").

  "[I interpret " [^] "]" a number of things that are not a QUOTE, QUOTE, QUOTES.

  Apparently, 'any number' does not include zero, as it fails (error 85: data not matching format) when the quotes are empty.

  What Miss me?

  This confusion arises as well in RegExes, but you hit on the answer: in the Simpsons "Zero is one percent", but in the analysis of String Nothing is not something.  You asked to match something that's not a quote, and there is nothing here that is not a quote, so it complains.

  In this situation if I really wanted to keep the convenience of analysis of string I would generally use Search & Replace to replace "" with "\00" before scan and then process a string that only contains null as empty.

• The analysis of the data of a string of series

  Alert LabVIEW Express 7

  Sorry, all I have to work with and there is no budget at the moment to upgrade.

  Hello, I am in phase 1 (data transfer reliable to labview) 24/7 of my small Miettinen, who is to display and record data environmental Lab 24/7 our Fisher 02-403 digital barometer that has a serial port. In fact, it came with the software, but no one here seems to like use it so I'll try to find something more intuitive. I can't find any info at all about I/O with this device, so I'm reverse engineering. I'm sure that you cannot write anything to this device only read.

  I started with the connection of the device and the interface with NOR measure and automation and received the following string: P,43,1019,44,31,01,0023.0\r\n.

  I tried to use the Labview 7 Express e/s Companion Instrument, selected 1 COMM, changed the timeout to 5000 (trial and error), added a step reading and analysis, ran and received the following string: P, 43,0999, 44,41, 01,0018.0, XX. After well guess, I determined that the values I have in bold change with the environment and the other 3 are always the same idea 9no what they represent). Alphabetical 1 in bold represents the tendency of climate S sunny = P = C sunny cloudy = etc., the value 2 is the atmospheric pressure in hPa, the 3rd is % relative humidity and the last is the temperature in Deg. C.

  At first, I tried to create simply chips for data I want and operation loop the wizard of e/s in awhile, but often error messages obtained suggesting that I need to define all the tokens in the string. I did it and it worked, then I opened the front panel to access the underlying schemas whence I came with the attached VI. I left this race for more than 24 hours, no error, seems good.

  My question on this forum is, can I simplify this VI losing a part of the analysis of the data that I don't need at this point?

  Please let me know if you can not access this VI maybe I can do a screenshot or something.

  Thank you

  Doug

  Yes, it can be simplified to just a bit.

  

  Since you are new to LabVIEW, you can start with the basic tutorial.

• TO_DATETIME gives the error ORA-01861: literal does not match the format string

  When I use the following in a formula in the column in the business model, the administration of BI tool does not complain:

  TO_DATETIME (LEFT ("registration - College". "D time". " ("' Exercise ', 4) | ("/ 09/01 ', ' yyyy/mm/dd')

  But when I use it in an analysis, I get the error message:

  ORA-01861: literal does not match the format to the call of the OIC string

  The scope of practice is a varchar of 6 characters (e.g. 201213), so I do not know what causes this error. Is this because the TO_DATETIME expects something like hh as argument?

  Without the element that to_datetime is supposed to work, here is an example that I made on SampleApp406.

  

  Try to add the "time", but for me it has always worked without problem.

• The analysis of the non-numeric characters in a string

  Hello

  I am communicating a robot to LabVIEW (2013) via TCP/IP and sockets. The robot is the server, and LV is the customer.

  I start with the target data in this format (in a string):

  "[0 ~ 100 ~ 0] ~ [0.96593 ~-0.25882 ~ 0 ~ 0] ~ [1 ~ 0 ~ 0 ~ 0] ~ [150 ~ 50]."

  [X, Y, Z], [Q1, Q2, Q3, Q4], [C1, C4, C6, Cx], [TCPVel, OrientVel] except replacement ',' (comma) with a ' ~ ' (tilde) because I load the target data in a spreadsheet which is a comma-delimited file.

  In LV, I take this string, the analysis of the chain and split individual items. I then pulled the singular elements as unique, 32-bit of real numbers. I take each one and convert them individually to a string, concatenate them and send them to the robot. The robot decompresses these raw bytes individually and converts them to a target of robot (position in space).

  I train (BT) check if the user has sent a bad character (non-digital) in the target data. Example of this is:

  [- 50 ~-150 ~ 0] ~ [0.96593 ~-0 ] [B2has5D882 ~ 0 ~ 0] ~ [1 ~-1 ~ 0 ~ 0] ~ [150 ~ 50]

  Now in BT, when I'm scanning the chain, these bad character becomes the entire element to zero and everything else then to zero as well. See attachment for example screen similar.

  My question is, my VI, I can analyze all non-numeric characters (that are inside the parentheses and characters that are NOT a ' ~ ' (tilde))? In this way, I can always get this item numbers and do not have this element or other items turn to zero?

  Thanks in advance for any help!

  Sorry for the question of the test

  SM

  
  

• 'analysis of the string' timestamp does not work for 18:00 (18:00)

  I found a strange question in LabVIEW.  I hope I am doing something stupid, but I just found a rare bug.

  Run the extract below by the following for the input string: 03:00, 18:00:00, 17:00:00

  Great for any other time time converts the EXCEPTION 18:00 (18:00), for which he returned as 00:00:00 (midnight). If you even add a second (18:00:01) you get in return the expected result.

  Hoping that I'm not losing my mind

  

  Well, I found a 'easy' solution: wire a valid timestamp default to the analysis of string premative.

  Still a rather unusual reaction

• Internal analysis based on the error Code 7

  I am trying to create the Setup program for one of my application and got stuck with deployment error. Build state indicates as follows

  From a newspaper for the deployment.

  Based on the analysis

  Analysis completed

  Error code internal 7 analysis of departure

  Path must be a directory or a LLB.

  Abandoned

  When you click the Distributor tab, he asks "Do you want to analyze the source files?", when I click OK, it says-" < no="" file="" information,="" analyze="" a="" workspace=""> "

  But it does not give the same problem when I uncheck the "of Teststand public directories' in the Source System tab. But I need to include the public directory to create the installer properly. What could be the problem?

  I created Installer a few months back and its job perfectly well. But now I need to review the sequence, that is why the installation program. But not stuck

  TestStand Version 2012

  Fransico,

  I have re installed Teststand 2012 and the issue has been resolved. could not figure that out what was going on. Then uninstalled Teststand 2012.

• The analysis of the data of a string in an array

  I'm trying to analyze data from this series, which are continually being added to a string. How can I do this in a table that is added to each pass through the loop? The data looks like this:

  20/08/2015-04:31:39, 0,242 4.382 0.219, 22.97, 8.211, 381,.

  20/08/2015 04:31:43, 0,241, 4380, 0,220, 22.78, 8.202, 463,

  20/08/2015 04:31:48, 0,242, 4380, 0.219, 23.06, 8.196, 543,

  I tried to use the block 'string function analysis' with my 'chain' as

  %f/%f/%f % f % f: %f %f %f, %f, %f, %f and %f,

  mikeporter wrote:
  Personally I have never had much luck with how long scan chains. I think that I divide the inflow on the date and then put the rest of the sample in a table 1 d of tanks using the spreadsheet string table. You convert the timestamp separately.

  In fact, converting the first timestamp.

  

• I get the error message "there was an error of analysis of the data on your system" when you try to use Windows Easy Transfer

  Original title: there was an error of analysis of the data on your system

  I get this error when trying to use Windows Easy Transfer to prepare to move from an XP PC to a Windows 7 PC. It passes through the part of the selection on where I later import files then says he is scanning the disc and fails with the above error.

  In the search for this error, I found information of 2007 could be be a nero problem AVI.  I don't have Nero installed and I can't find the log files in the directory MIGWIZ.

  It is a small (50 GB) HD who do not have much space available on it (I'm not in front of it now).  Is there a minimum amount of free space needed to run this executable? That is why it is a failure?

  Could there be other issues behind this failure?
  Thanks in advance

  Hello

  Follow these methods and check if that helps.

  Method 1:

  I suggest to download from the link provided below windows easy transfer tool and install it and then try to transfer the data back.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  Method 2:

  Refer to step 2 and step 4 from the link provided below:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

   

   

  Method 3:

  I recommend you to try different types of transfers using different media. You can also do a disk clean up of the Windows XP computer. Remove unwanted programs from the Windows XP computer. Do a disk clean, right click on the C drive, and then click Properties. Clean, then click on the disc.

  For use with different media windows easy transfer, you can click on this link for steps to follow:

   

  http://Windows.Microsoft.com/en-us/Windows7/transfer-files-and-settings-from-another-computer

   

  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions