Analyze the BSOD

Similar Questions

• Compaq Presario SR2177 BSOD Win 7 - help analyze the .dmp file.

  New installation of Win 7 Home Premium, Compaq Presario SR2177CL.

  AMD X 2 3800 + 2 GHz Dual-Core CPU

  1 GB of DDR2 Ram (2 x 512)

  HDD Sata 200 GB WD

  After a clean, led installation to all updates MS blue screens started.

  MemTest 86 +: pass

  HARD drive test: pass

  Last crash dump file is here:

  https://SkyDrive.live.com/?CID=e714ffc82e58b1a6#CID=E714FFC82E58B1A6&ID=E714FFC82E58B1A6%21174

  As noted, this is a clean install, online only for MS. updates I tried to parse the file .dmp myself, but certainly need some help here.

  Power supply tested ok without ceiling blown on the Council, the onboard video, the lan & sound. No cards installed.

  Blue screen appears almost immediately once the initialization is complete.

  Thanks in advance for any suggestions.

  PDI

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:

  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.

  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).

  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.

  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.

  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.

  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use diagnostics from built-in memory (run MDSCHED) or the utility memtest86 3rd - party to run plenty of evidence of hours of testing.
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.

  
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:

  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.

  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• Why do I get the BSOD?

  In recent days, I've known BSOD 7 or 8 per day. This includes "MEMORY_MANAGEMENT", "SYSTEM_SERVICE_EXCEPTION", and sometimes it does not give a reason, just a list of suggestions. I tried it without success. I ran the Diagnostic tool and it told me nothing. I don't know where are the minidump files, but if someone can tell me, I'll try and bring it to the top. In the meantime, I need help. It is impossible to get anything done.

  Hi Zack,

  Thanks for posting your question in the Microsoft Community forum. I understand that you get the BSOD error under windows 7.  I would like to help solve you the problem.

  Before troubleshooting, provide us with information.

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. don't you make changes to the computer before the show?

  This problem may occur if one or more of the modules Random Access Memory (RAM) that is installed in your computer are damaged or if the RAM configuration is incompatible. It can also be any device, its pilot or related software.

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.  If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files: http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65

  Additional information.

  I suggest you to refer to this article to check if this help.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• Analysis of the BSOD

  Hi all

  I've been making BSOD every few days.  I analyzed a memory full dump and found specific things that lead me to think that I can be infected by malware.  As I am new to the analysis of the BSOD, I'd be happy to get your insight as it seems logical or not and what other steps can I take by completing the analysis.  Here's the info from the analysis:
  3: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: fffff680000198c0, memory referenced
  Arg2: 0000000000000000, IRQL
  Arg3: 0000000000000000, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: fffff80002de9a66, address memory

  Debugging information:
  ------------------

  READ_ADDRESS: fffff680000198c0

  CURRENT_IRQL: 0

  FAULTING_IP:
  NT! MiGetWorkingSetInfo + 286
  fffff800'02de9a66 488b 0408 mov rax, qword ptr [rax + rcx]

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0XA

  Nom_processus: svchost.exe

  These two related AVGIDSFilter.sys ID Application activity monitor filter driver. by AVG Technologies

  I notice that you have of moy.
  AVG can be a cause of BSOD.
  Please remove and replace it with Microsoft Security Essentials
  http://www.Avg.com/ww-en/utilities'] download tools and utilities | AVG worldwide

  http://www.Microsoft.com/security_essentials/ "] Microsoft Security Essentials - free Antivirus for Windows"

  Error checking 24, {c08a5, 0, 0, 0}
  Probably caused by: avgidsfiltera.sys (avgidsfiltera + 1 b 88)

• Satellite C660 - 2 EV suddenly started giving me the BSOD

  Last week my laptop 2 years suddenly started giving me the BSOD. It doesn't seem to be anything that triggers it. Do not know what information I provide, but I tried a restore of the system to an earlier date, but that did not fix.

  I managed to make a backup of data, and I have no recovery disks. I also bought an extended warranty last year.

  I should arrange to have it repaired or is there something else I can try first?

  Thank you.

  > I provide but I tried a restore of the system to an earlier date, but that did not fix.

  I put t think it's the best choice. I would recommend you to retrieve the computer laptop back to the factory settings, either using the Toshiba HDD recovery or the Toshiba recovery disc.

  If BSOD would appear after the system recovery, I recommend you to check exactly the content of BSOD.
  Sometimes non-compatible drivers could cause the BSOD.

  But of course, also the hardware problems (memory problems) could be the reason for BSOD.
  In this case, you must contact the Toshiba ASP to verify the material.

• Satellite M100 - I can't analyze the CPU temperature

  I am a Toshiba Satellite M100 series owner (Core Duo T2300, X 1400, etc.). The problem is that I can't analyze the CPU temperature variations in such popular application such as Everest or Notebook Hardware Control. Also any other software provided by Toshiba and installed already on my HARD drive does not include some CPU diagnostics, including temperature changes!

  The only software that seems to work is the HWiNFO32 so there is a thermal probe inside which specifies that Centrino Duo processor temperature, but this software is not very user-friendly :(

  There is a request for Toshiba do something with this... I've updated the BIOS in my template for a version 1.70, but this does not change I could easily noticed (or is he?)  :(

  Hello

  In most cases applications can give you info on the hardware and the different settings but the temperature of the CPU in most cases is not visible. Toshiba has no tool or utility that can read or modify.

  BIOS update has absolutely no influence on it. Satellite M100 is one of the latest devices and I really don t understand why it is so important to you. Important in my opinion is the stability of the system, the operation of the equipment and no problem with the software you are using. Am I wrong?

• Google Cloud Print setup - impossible to analyze the capabilities of the printer

  I am trying to add my CP1525nw to Google Cloud Print as a Cloud, and not as a LOCAL printer printer, however every time that I add my eprint email I get the following message. "Impossible to analyze the capabilities of the printer" - I tried for public and private use for eprint settings with no luck.

  Any help would be greatly appreciated.  I tried the reset email with no luck...

  EDIT - 01/04/11:

  I chatted with HP support, and although the representative was extremely courteous, they could not help me.  The support agent assured me that the matter would be taken at a higher level and looked so I hope that we can have a resolution here shortly.

  EDIT - 04/04/11:

  Received a response from the original HP rep that I chatted with online.  In short, it was not able to find a solution and States, that the question will be sent upwards to the highest level of technical support from HP...  We shall see.

  EDIT - 05/25/11:

  After 2 months of waiting, HP has corrected the problem.  Don't forget to upgrade to the latest firmware and check all the settings before continuing.

  The fix came from the side server - this defiinitely had nothing to do with the firmware.  I've updated on Monday for the latest on the HP website and it was still not working.   The gentlemen of tech support that helped me sent me an email a few hours after we talked, saying the sea a fix was to come.

  Nevertheless, I am happy without worrying how the fix is here!

  It took only 2 months to fix, but I'm glad it is.

• Updating BIOS on Equium A60 to cause the BSOD?

  Hey,.
  I had my Equium A60 for a little less than 2 years and now it has started flasihing a blue screen when it works for a while, I tried to read what he says but it's too fast and then it restarts the computer! the only things I can do out there are BIOS of letters that I've now put together probably need an updated (or so I hope this is just the problem)...

  given that I've never updated the BIOS until I was wondering if I make a mistake it will cover on my extended warranty? I think I also insurance on it could someone help please?

  Hello

  This document explains how to disable the automatic restart of Windows XP after a system failure:
  http://support.toshiba-tro.de/KB0/FAQ5B01770000R01.htm

  If you turn off it does not restart the laptop and you can read the error message.
  But I think that this message is not really a help. You will get a memory address, and a common user is not able to read this BSOD.

  The BSOD appears especially because of the misconduct of software or a hardware malfunction.
  I put t think that BIOS update will help you with this problem.
  I think you should try to reinstall the operating system. Especially the new facility allows to solve software problems

  But probably the high temperature may also be responsible for these BSOD errors.
  In this case you should check the fans. Most dust and debris would be responsible for the high temperature because fans may not turn with a maximum return.

  If you have no experience a technician must clean the notebook professionally.

• I get the BSOD when trying to install Bluetooth on Satellite A200

  Hello!

  I have a problem:

  When you try to install the bluetooth for the first time since the reformatting of the hard drive, I get the BSOD. During its restart and tries to launch the bluetooth I, once more, get the dreaded blue screen of death.

  I have Vista home premium 32 bit
  I recently reformatted the hard drive and reinstalled the operating system
  I checked for viruses, etc., and it's clean...

  Don't know what else to say...

  How can I resolve this problem and install the bluetooth?

  It is very mysterious, because the laptop should run fine after using the recovery CD.

  In your case, you should check if your BIOS is up to date. If this isn't the case, then update the BIOS. But to be honest, I guess there could be a hardware problem.

• nipalk.sys, causing the BSOD 000000c 4 Win7 64 bit stop

  I am running Win 7 64 bit and installed "Windows Software Development Kit (SDK) for Windows 8 consumer Preview" today.

  Now, I get the BSOD Stop 0x000000C4 on each time you start nipalk.sys error

  The only work-around, I could come up with is to rename the driver in nipalk.bak, obvisously I can no longer use it in this case so it's not a solution.

  There's a PAL 2.6.5 update on ni.com site, but this does not solve the problem for me.

  nipalk.sys is the 2.1541.3.0 version of the 14/02/2011.

  I would be grateful all the solutions.

  Here is a partial output of the minidump:

  MODULE_NAME: nipalk

  FAULTING_MODULE: fffff80002e1e000 nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 4d59b378

  BUGCHECK_STR: 0xc4_f6

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from fffff800033243dc to fffff80002e9ac40

  STACK_TEXT:
  "fffff880 '0d12f138 fffff800' 033243dc: 00000000 ' 000000 c 4 00000000' 000000f6 00000000'00000390 fffffa80 ' 111945e0: nt + 0x7cc40
  fffff880 '0d12f140 00000000' 000000 c 4: 00000000' 000000f6 00000000'00000390 fffffa80 '111945e0 fffff880' 0148f191: nt + 0x5063dc
  fffff880 '0d12f148 00000000' 000000f6: 00000000'00000390 fffffa80 '111945e0 fffff880' 0148f191 00000000'00000018: 0xc4
  fffff880 '0d12f150 00000000' 00000390: fffffa80'111945e0 fffff880 '0148f191 00000000'00000018 fffffa80' 111945e0: 0xf6
  fffff880 '0d12f158 fffffa80' 111945e0: fffff880 '0148f191 00000000' 00000018 fffffa80 '111945e0 fffff800' 03339ae4: 0 x 390
  fffff880 '0d12f160 fffff880' 0148f191: 00000000'00000018 fffffa80 '111945e0 fffff800' 03339ae4 00000000'00000390: 0xfffffa80'111945e0
  fffff880 '0d12f168 00000000' 00000018: fffffa80'111945e0 fffff800 '03339ae4 00000000'00000390 fffffa80' 111945e0: nipalk + 0x8f191
  fffff880 '0d12f170 fffffa80' 111945e0: fffff800 '03339ae4 00000000'00000390 fffffa80' 111945e0 00000000'00000002: 0 x 18
  "fffff880 '0d12f178 fffff800' 03339ae4: 00000000 ' 00000390 fffffa80 ' 111945e0 00000000'00000002 00000000'00000963: 0xfffffa80'111945e0
  fffff880 '0d12f180 00000000' 00000390: fffffa80 '111945e0 00000000'00000002 00000000'00000963 fffff880' 0148f191: nt + 0x51bae4
  fffff880 '0d12f188 fffffa80' 111945e0: 00000000'00000002 00000000'00000963 fffff880'0148f191 00000000 00000000': 0 x 390
  fffff880 '0d12f190 00000000' 00000002: 00000000'00000963 fffff880 '0148f191 00000000 00000000' fffffa80' 10d4d880: 0xfffffa80'111945e0
  fffff880 '0d12f198 00000000' 00000963: fffff880 '0148f191 00000000 00000000' fffffa80' 10d4d880 00000000'0000001 c: 0x2
  "fffff880 '0d12f1a0 fffff880' 0148f191: 00000000 ' 00000000 fffffa80 ' 10d4d880 00000000'0000001 c fffff800'03175375: 0 x 963
  fffff880'0d12f1a8 00000000' 00000000: fffffa80 '10d4d880 00000000' 0000001 c fffff800 ' 03175375 fffff800' 03339878: nipalk + 0x8f191

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  nipalk + 8f191
  fffff880'0148f191 85 c 0 test eax, eax

  SYMBOL_STACK_INDEX: 6

  SYMBOL_NAME: nipalk + 8f191

  FOLLOWUP_NAME: MachineOwner

  Nom_image: nipalk.sys

  BUCKET_ID: WRONG_SYMBOLS

  Hi grcutter,

  This assertion of specific Verifier, STOP 0xC4 in nipalk.sys with P1 = 0xF6, was reported to R & D such as CAR #185772. It will be corrected in a future version of NOR-PAL, which should be delivered with a future version of any drivers OR you use. Until then, the solution is to disable the "Security controls" setting in the driver verifier.

  Brad

• How to analyze the data of 10 bytes encoded in the HH306 of Omegatte data logger/thermometer?

  I am trying to write a simple code for a HH306 of OMEGAETTE thermometer/travailleursduweb.com data recorder.

  That is the problem. I communicate with the device via RS - 232, using Labview 8.5.1 and windows xp. I ask her for "all the coded data", which is actually the only option. He returns 10 bytes of encoded data, the manual describes the meaning of each byte and I understand that. The problem is that I can't analyze the information for use in labview, for example: I want to extract the temperature and simply display it.

  on request, I get: 10bytes (read as a string from the serial port read buffer): display HEX: 02 00 A8 48 FF EF B6 49 B6 03 is perfect, and what I expect.     Display codes: \02\00\A8\B6H\FF\EF\B6I\03 The Normal display is a series of special characters, I don't understand, especially since I don't think they are ascii characters that must match returned hexadecimal numbers!   For the life of me, I can't understand how to extract the information (what are the 48 6 hexadecimal display) of what is returned. All string manipulation functions seem to work only on what is given in Normal view. (The 4th and 5th byte of the data are the codes of the BCD for temperature: for example the temperature was 64.8 degrees farenheight when I took this reading).

  Can someone help me to analyze the data returned by this device?

  Ok... I think that I thought about it. I found this: http://digital.ni.com/public.nsf/websearch/77C8F61D36F5A23086256634005ACB38?OpenDocument.

  I guess the normal display garbled is corresponding to each hexadecimal ascii characters. I'm just not used to seeing characters beyond the decimal number 127 ascii or hex 7F.

  So, basically, to analyze the 10 bytes of data:

  (1) break the string read from the serial port in the 10 ascii characters (using String subset vi)

  (2) son of each output string in the left input of 10 separate Type vi Cast.

  (3) wire a constant U8 in each terminal 'type' VI Type Cast.

  cables of 4) the chain of each Cast of Type vi output to the input of a number hexadecimal string vi.

  (5) concatenate or use as you wish as hexadecimal numbers (now in string format) which cause.

  See you soon.

• analyze the 2 bytes at a time series data

  I am acquiring 8 bytes of serial data and I would like to analyze the data in 2 bytes of data, so that I find myself with 4 measures of different temperatures. I tried a lot of things that I found in the forum, but I can't make it work. I have attached the VI is using string function analysis, but I'm not very familiar with this function. My fault my serial data so that you can see the data that I get.

  Thanks in advance for your help

  Lowski

  See if it's to help you get started. You must understand the scale yourself.

• Analyze the text and identify which columns contain unpaired data

  Hello world

  I want to write an elegant solution in LabWindows-CVI to accomplish the same thing as what I implemented in LabVIEW.

  The client does not use or do not own LabVIEW.  I have to code the solution in the CVI.

  Order to simpify the explanation of what it is that I try to do, I wrote a small example in LabVIEW (see below):

  

  The code needs to parse a string to determine which data column includes unpaired.  To do this, I first removed the unwanted text on the top and bottom.  I also removed the extra space between the 2 groups of data by replacing the two separated by one to facilitate the next step.  The result string has been converted to a table 2D-string.  Only the columns you want to search for remained (total of 16 columns).  Table 2D has been transposed as the table 1 d of research searched each line, I want to look in each column.  2D table transposed in its entirety was sought of all no corresponding values, which fills a table 1 d of boolean.  I converted the table 1 d of boolean to a number to see if data 'no match' has been found.  If none have been found, the value would be zero.

  I need help to encode this in CVI.

  Thank you very much

  RayR

  Ray, aspect string makes me think that it's a memory dump, while I designed a solution that analyzes the values of the whole of the chain and operates on them, instead of working on the string itself. Take a look at the attached example which should be what you're looking for. feel free to add comments or ask for clarification on some instructions if you need.

• Photosmart 7520: Impossible to analyze the documents of legal format on HP7520

  I've read the post of the so-called solved this problem, but NOT for me.

  I use Photoshop > import > HP Photosmart Twain... I have setup the parms legal analysis and I have the document using the charger from the power supply.

  It scans but cut above the bottom.

  I am unable to find any setting in the printer to be configured for legal size, I suppose that the charger has NO need!

  I'd appreciate your help!

  Thanks in advance for any help!

  Hello there @Skoutariotis , I hope you're well

  I read on digitization as legal size problems you are currently experiencing and wanted soft hand with my suggestions.

  The Photosmart 7520 should be set to analyze the legal size through to choose parameters in the HP scanning software, I posted below as an example.

  If the options are not in your printer software as described, perhaps the full functionality driver and the software is not installed, which you can download and install it here: HP Photosmart 7520 e-all-in-one printer full feature software and drivers

  You can also check for a firmware update and complete if necessary, which can help as well:

  Get the latest Firmware and updates

  You should see the option to select to analyze as legal size in the printer software.

  I hope this helps, have a wonderful weekend

  

• How to analyze the data of the cDAQ and Signal Express, especially after analysis?

  In the first series of tests of my instrument, it took longer than expected for the race.  Thus, the data was saved in 6 days.  The file is too large for export to Excel.  At the beginning of the project, I was as ignorant as I could go ahead and add analysis and the scaling of measures.  By the scaling, I mean my data of switching current dew points or whatever it is that I record.

  How to evolve the data to read the output data as expected 4mA = point of dew of-20 C or 0 PSIG?  Can I pre program this to be recognized for each event?

  For real analysis I am doing – I would first analyze the data I recorded and choose different points to send to Excel to graph and analyze.  Is this possible?

  Secondly, I would like to know how to scale and analyze my data in the project without having to do this later analysis in the future?

  I have a cDAQ-9172 with LabVIEW signal Express 3.0 that uses four modules - 9211 2 modules of thermocouple, my 4-20 1-9201 module +/-10V module and 1-9203.

  Thank you for any assistance.

  Hi Patricia,

  "' You can do this by adding a step Load/Save signals ' analog '.  I hope this helps!