Angle Viewer displays incomplete Clips

Similar Questions

• Views of Angle MultiCam sync with Clips

  I ran into a weird issue with a multicam sequence.  I have 4 corners upward, and the views of angles 1-3 are all out of sync with their own clips by a variable number of seconds.  The clips are all perfectly synchronized in the chronology, and the part "out program" display multicam is correct.  It is disconcerting. Multicam playback is also really * restless where, normally, it is very smooth.

  I have another multicam sequence in the same project that is configured in the same way and rereads dead-end, with all views of the angle in synchronization.

  Anyone seen this before?   I emptied all of my preview and cache files and import the sequence into a new project and it's always wrong to behave.

  Also, for some reason, on load audio and video clips keep coming back on 'Even as project', even though I have to direct them to a folder on one of my paintings, and save the project.

  Thank you.

  4 angles on a 1080 p timeline.  All the clips were shot at 23.976:

  (1) RED Epic 5 K HD resized to 1080 p, 23.976

  (2) canon 5 d mk3, 1080 p, 23.976

  (3) canon 6 D, 1080 p, 23.976

  (4) RED Epic 5 K HD fist of 1:1, 1080 p, 23.976

  I solved the problem!  While footage source for multicam problem sequences start to 00:00:00:00, they all contain sequences where the audio begins at the beginning, but the video track starts a few seconds later.  I inserted a black video in the beginning of the video track of the sequence of each source and the angle views were resolved instantly.

• Media Player / my computer shuts down to the down/restart after hybranation... event viewer displays the following errors: 14353, 14349, 1101 6009 1001 and 7000; is there a download to fix this problem?

  My computer restarts several times.  The event viewer displays the following errors: 14353, 14349, 1101, 6008, 1001, 7000.  I know it's related to windows media player.  Is there a download or a patch for this problem?

  Hello John Dorch,.

  1. which version of the operating system is installed on your computer?

  2 did you change on your computer before the show?

  We need more information on the topic to provide you with the best solution.

• The event viewer displays continuously errors with ID 7000 and 7009

  I use Acronis Disk Monitor, which shows the disk health 82% due to a bad block on disk. Observer events poster continually errors on ID 7000 and 7009, but I can't find a solution to these errors or what they mean exactly.

  11/14/2010 08:31 am, Catkin333 wrote:

  I use Acronis Disk Monitor, which shows 82% because of the bad health disk
  block on the disk. Event Viewer displays continuously errors on ID 7000 and
  7009, but I can't find a solution to these errors or that they
  mean exactly.

  If Acronis reports bad blocks on the disk, then you should replace the disk as soon as possible.  Blocks of bad sectors/bad is not repairable, and once they begin to appear that they tend to behave like a snowball rolling downhill, you will get several of them with increasing speed.  You may lose your data if you keep using this drive.

  Regarding the events 7009 & 7000, you will need to copy & paste the events here for give us to you more information.  Double-click on the event to see its properties, and then click the icon of the Clipboard (which looks like 2 pages of paper) to copy the event, you can then paste it in your next post.  These Service Controller errors may be caused by a multitude of different things.

  John

• Design view displays styles

  I just installed Dreamweaver CS3 and when I open a page to be edited, the code works, but design view is not any style. When I have preview in Firefox and IE, it has the style and looks great. If anyone has had this problem or know a fix?

  Problem has been solved by going to view > display external files

• PP - How can I disable "split view" when moving clips on the timeline?

  In Premiere Pro, whenever I have move some clips, this split view appears and for some reason that it makes my computer stall for 2 minutes each time. Imagine how long it takes to make a video then!
  The program does not crash, the only thing I can't do when it stalls is to get a preview of the video (reading timeline)

  Nothing happens when I press play, up to 2 minutes later.

  

  Many times this error pops up when it starts to work again:

  

  Maybe disable split view will fix it, or maybe there's a more legitimate solution?

  To turn off this display, disable the Composite preview at Trim

  

  MtD

• Transfer of temporal settings on a loop of multi-view display edit view?

  When I insert my session in muti-track mode I stretched both the clips that are curly and whenever I load the session it takes time for the program to stretch these loops.  I want to do is go into edit mode and transfer the settings exact time stretch I discovered multitrack to change the display.

  In other words I would like to permenantly, stretch loops (destructive edit) so I have to wait for them to be stretched in MT view whenever I load the session.  However, the settings seem to be different in each view, in fact, when working with a clip-in loop in MT he doesn't tell me same what percentage the clip as stretched... summer seems so impossible to replicate this in edit mode.

  Is there anyway to duplicate my temporal extension settings in edit view without extensive trial and error, seems almost impossible, but maybe I'm missing something, thanks for any help. -kp

  Kristoff P wrote:

  I can't seem to find a way to stretch a certain tempo in editing a file in loop mode, is it possible?

  I don't think that there is a way to do it at all. You must keep in mind that reading mechanisms are different, and that EV is not a player in a loop as such. Really, this is why I suggested you get loops to play properly in MV and export the result of this in a single file to reintegrate.

• The palette view displays is not the content of the palette

  Hello!

  I am new to the community, so "Hello everyone!" and thanks for your help

  My problem: I have a scientific camera that has its own drivers and for Labview VI. I installed the camera correctly, and I have already created a folder and copied records .llb on this subject.

  When I open one of the examples to start working with it, I can see in the palette display, in user, my file controls. But there is nothing in the folder. I can't find the llb or VI that I expected.

  I tried to go to Advanced / Edit defined Palette, but I don't know what to do, because I can find all the .llb and VI. So it seems that everything is correct. But it's not because I don't see one any of them in the view of the normal range.

  Can sby tell me what I'm mising? There should be something that I did not properly, but I don't know what.

  Thank you!

  Hey, welcome to the forums

  The sets of Vis and llbs for your camera are known as an instrument Driver. You must check out these to a specific location so that LabVIEW can update the sets of pallets using .mnu files included in the driver files.

  The location is C:\Program NIUninstaller Instruments\LabVIEW 2014\instr.lib\

  Try to move your files, then restart LabVIEW.

  This section of the Knowledge Base can also be useful for you:

  http://digital.NI.com/public.nsf/allkb/86256F0E001DA9FD86256F0B0057E6E7

  The following white paper explains how to edit, build and install files .mnu to add/change the current set of the palette.

  http://www.NI.com/Tutorial/14528/en/

  See you soon

• multi-angle view z liquid jade s57 camera mode (what should be done, how to use it)

  Hello

  I brought Acer and nobody seem to be able to explain to me what is the view from multiple angles in the camera.

  When I press the photo button there is a green line ranging from the left to the right, I guess so I can move around the object im taking a picture, but I don't know m.

  Only one officer of acer told me take several picture and it will merge them into one, no it's not.

  What is the multi-angle notice, how I use it and what is its role?

  From what I've seen online of other phone its supposed to do a 3d like this image when you turn the screen on the left, you see the left of the object, the same goes for when you turn the phone to the right. But I tried to take a picture while moving the camera 180 degrees around the object and its actually not not something special.

  Thank you for helping me.

  kalmeq wrote:

  From what I've seen online of other phone its supposed to do a 3d like this image when you turn the screen on the left, you see the left of the object, the same goes for when you turn the phone to the right. But I tried to take a picture while moving the camera 180 degrees around the object and its actually not not something special.

  Yes correct.

  I was able to use a picture of multi-angle using Acer abPhoto, select the picture of multi-angle, press the icon of the cube at the bottom on the left, then move your finger on the touch screen left or right, and it will move.

• Group/expandable list view display

  Hello

  I have to create the list view, which brought together the person using his first letter.

  Now, I want to know that is it possible to display the particular item in the listview with header.

  I mean at the same time that a group should be open. and first, the Group should be invisible.

  Any user group will tap the contact in this group must be visible.

  So I tried with the current listview with header.

  But I'm not able to do the job I want.

  So is that what someone did this thing with the default listview.

  Is this possible?

  If Yes, how can I achieve this?

  I want exactly like expandablelistview in the android.

  Thanks in advance.

  bskania.

  Try to look at this example: https://github.com/blackberry/Cascades-Samples/tree/master/FilteredListView. I think that you will find what you are looking for.

  It may be useful

• Windows 7 Photo Viewer displays a bad JPG image colors.

  Yes, I have the same problem with Windows 7 photo viewer. The colors are not with JPG images.  Other image formats (TIF) is displayed correctly.  The problem occurs only when I put the Windows Photo Viewer mode "play Slide Show". If I manually control the slide show the colors are correct.  This problem seems to be connected in some way on the color management profile attached to the Lady JPG.  I have experimented with the help of different profiles (use Adobe Photo Shop CS5 to edit profiles) and some profiles seem to work (such as ProPhoto RGB) correctly or at least differently. Anyone have any suggestions to solve the problem.

  Maybe the following link would provide a few ideas:

  Windows 7-
  Change color management settings
  http://Windows.Microsoft.com/en-us/Windows7/change-color-management-settings

  No guarantee, but it might be interesting to try
  remove all color management profiles.

• How can I configure folder for the thumbnail view display?

  I want to choose a photo of some to show in front of a folder.  Without the record showing mode portrait.  I want to see as well as possible image and the display of the ICON is on a slope.

  Under XP, I could choose to view thumbnail and select the file that I wanted to represent the file.

  Hi Helpemmy,

  You can follow the steps below and check if it helps you to see the pictures in thumbnail stored in the folder.

  a. Click Start.

  b. go to control panel and open Folder Options.

  c. click on the view tab

  d. uncheck the option "always show icons, never thumbnails".

  e. you can also check to see that there is a check mark in the box "Display file on the photos" and then click on apply and then click Ok.

  Now you should be able to see the thumbnail images in the folder.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• addChild() display the Clip outside the parent company

  Hello

  I use the addChild() method to add a nother of Slim Movie Clip we.

  MC1. AddChild (MC2);

  But once the Clip is added (and the second Clip is higher than the first) and then it is displayed outside the first Clip. Is there a way to prevent to display outside the parent company?

  Thanks in advance,

  Joe

  Not quite sure what you mean. If you mean you want to restrict the edges of the additional child to stay inside the mother, then you'll want to use a mask. If this isn't the problem, please explain better.

• If you open/view display the colors that you see a color-block how to change you the choice

  You want to bring a region a color for you the view menu and choose Show colors.  You see the color of each box.  How to change the color of which is in color?  If you want a piano black how can I change one of the other colors to black?

  You can not. This color scheme is wired...

  There are customizations that you can get to change the themes of color and according to me, there is a way to change some of the resource files in the application to change the colors... but in general, if you are looking for a way to change the colors of the palette (color wheel, color pencils, etc)-this option does not exist.

• Properties view displays all the settins, theme shows right and when I leave my computer on some time it crashes. How can I fix it with the windows CD? Compatibility Wizard says bad ini file__

  When I try to change the background, display shows theme instead, properties and when I leave my computer on at a certain time, it freezes. What can I do to fix this? How can I use windows CD to repair, when I put the CD and you press the 'r' key, nothing happens, please help?

  The lack of tabs in display properties usually indicates a malware infection. First run the scans and do not skip the preparatory work. If the machine stands (not frozen) in Safe Mode (where you'll be scanning), it is also a good indication of infection. Regarding the CD does not start, you probably don't have the computer configured to boot from the optical drive. But no matter, because enter the Recovery Console (which is what happens when you press 'R' from the XP installation disk) won't be useful in your situation anyway.

  Go through these stages of systematically General malware removal:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Include analysis with David Lipman's Multi_AV of and follow the instructions to do all scans in Mode without failure. Read the Special Notes about the use of Multi_AV in Vista.

  http://www.elephantboycomputers.com/page2.html#Multi-AV - instructions
  http://tinyurl.com/yoeru3 - download link and further instructions

  When it failed, download Guided Help. Choose one of the specialty forums listed on the first link. Save and read his FAQ display. PLEASE DO NOT DISTRIBUTE NEWSPAPERS IN MS FORUMS

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!