Animation button loops between above and outside

Similar Questions

• Browse catalyst prepared - export between inside and outside as in the catalyst?

  Hello world

  Dear people of Sony, is possible to add a feature to export / trasncoding files between In and Out marks only as in catalyst go? Was surprised not to find, very handy when there is a large file that has two or more WB settings required, to export part of the file with the parameters a, marking the section with inside and outside and then adjusting those yet to export the or other parts of the shooting with an another WB settings?

  I know there is a feature to copy sections of the files ' between inside and outside "only but it would have been more convenient to have it as in catalyst browse my humble OPINION."

  Or is there a simpler workflow that I'm missing out on?

  See you soon

  Max

  P.S. Thanks to solve the strange Maj WB problem that I reported earlier, Travis and team, I have since reinstalled catalyst prepare 2015 and in awe of the capabilities of the software. Great job.

  Hi maximdryginsony:

  Thanks for the question.

  I think the function of catalyst to prepare that can solve your problem is a subset of creation. What you can do is put an In/Out point with a WB setting, and then click Log. Create a subclip (see screenshot). This will create a subelement with the color settings.

  

  -Travis

• Panel source of Play/Pause plays between inside and outside

  It is a behavior that has recently changed. I don't know what causes the change I do not remember change parameter. But let's say I put a + point in the source window, then put pause playback. If the playback head is outside of the in + area and I touched the game, playback does not start from the read head, but it is to the point and from there. It drives me crazy.

  Premiere Pro 10.4.0 (30) CC aka 2015.4

  Mac OSX 10.10.5

  If you have activated with points in the source monitor and exit loop, it will always start playing from the point in. Press CMD - L on MAC or CTRL-L on a PC to disable looping. You can also find the loop on your button bar button and turn it off.

• Windows update 7.6.7600.256 agent repeatedly fails, turns off automatically updates then crashes on a loop, between insatll and updates

  the Windows update for vista 7.6.7600.256 agent attempted to repeatedly update fails.  I used the fix it app and how many resources can find your site, on the chance.

  Frustrated, please help.  I go to the update and it says to install the new agent to update so, I can receive the updates, close the window then after 30-40 minutes updates automated message disabled, so turn it back on and still does not work.  Several times after I click on install new update agent he schecks for new updates and I have a backward loop to the installation.

  Help, please!

  Thank you

  Hi Larrygrybos,

  ·         You receive an error code or error message for the update failed?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to manually download the Windows update client according to the edition of the operating system 32 or 64-bit:

  32-BIT downloads: http://go.microsoft.com/fwlink/?LinkId=178959

  64-BIT downloads: http://go.Microsoft.com/fwlink/?LinkId=178960  

  You can also see the following article for more information:

  Windows Update Error 80004002

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-Error-80004002

   

  Method 2: I suggest that you put the computer in a clean boot state and try to install the update.

  You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.

  Method 3: If the method above doesn't help then try steps listed in the following article and verify.

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know if that helps.

• PIX-limit connections embrionic & total between INSIDE and OUTSIDE.

  It is medium possible and straight forward to limit the number of connections embrionic and total if a PIX from the outside to the inside by using the parms in the NAT and STATIC commands.

  This list is possible to limit the embrionic connections and total from one host to the PIX INSIDE make the connections to the outside?

  Follow these steps exactly the same way. Assume that the host inside is 10.1.1.1.

  Keep in mind that if you have the following:

  public static 50.50.50.50 (Interior, exterior) 10.1.1.1 netmask 255.255.255.255 1000 25

  Then, it creates a static for the inside host 10.1.1.1 and will limit connections to or FROM this host to 1000.

  If you do not want to chew a static (and an external address) for this inside the host, you can do something like the following:

  Global interface 20 (external)

  NAT (inside) 20 10.1.1.1 1000 25

  and outbound connections to this host will be PAT had the address of the external interface, but will be limited to 1000 connections or semi-open 25.

• PIX 515E (7.0.1) - problem with the VPN connection between inside and outside

  Hello

  I ve creates a VLAN on the pix.

  In this VLAN, users are allowed to connect only to the Internet. Everything is fine, but when trying to connect with his VPN Client to their company, it has problems... (Outside traffic flow, but no traffic came back.)

  Is the only solution for this problem to create a Pool of Nat with public ip addresses, one to one mapping, or is there another solution with a public IP address (NAT on PAT) possible for this problem?

  Thanks for your replies.

  D.

  The problem is that the esp is an IP Protocol, so PAT will not work in this scenario. When the return traffic returns to pix he doesn't know how to get to the inside host. The only way to do this is by adding a static nat (1 to 1 mapping) and create a rule to allow esp. Is what type of vpn client? Microsoft vpn? Cisco vpn? If cisco VPN, perhaps, they can use NAT - T on the vpn that overcomes the question PAT by encapsulating ipsec within UDP packets. You need to talk to the admin VPN and itself it allow.

  -kevin

• Between relaxation and a target?

  I wonder if there is a way to add an object between a trigger and a target?

  I want a slide show where the images will be larger in the background, and then on top of that a map of the United States and in addition, triggers placed as cities. I want to do this without making the map of each slide part. Now, it's the only solution that I can find.

  An approach that might work for your use case would be to make the card to be the Image to fill the button in the widget of Composition. In the layers panel, you can drag the following button to between triggers and targets in the stacking order. This means that if a viewer clicks on a city background image would go to the city, and if they click on the map it would advance to the next town.

• Convert to timeline Animation button does not appear.

  Convert to timeline Animation button does not appear and its driving me crazy.

  in the window animation animation images mode sound and this button im talking about does not appear!

  Can someone help me please?.

  Animation of scenario is only available for Photoshop Extended. You have not extended if you do not make editing animations

• tried to send emails using the fast-forward button now e-mail flashes on and outside

  tried to send emails using the fast-forward button now e-mail flashes on and outside

  Please disconnect from the Internet temporarily, if necessary, by disabling a Wi - Fi connection or unplug Ethernet cable, whichever is applicable.

  In the Mail menu bar, select

  ▹ Connection Doctor window

  Look for the email account (SMTP) out in the window that opens. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. We'll pick the one affected. Make a note of the settings. Click the sign to remove, and then click OK.

  Reconnect to the Internet and add the account back with the same settings.

• Windows 7 home first OA: start of the laptop but I have a black screen, but the caps lock button led on and outside

  Dear anyone!

  I need a help of deperate. I have a Windows 7 first OA type HP laptop at home that he is the specification that I have.

  I would write what happened. I always before I close my laptop I chose the tab.and of sleep when I open again is to start automatically, but somethimes I do the Start button. So my problem started when I did my usual close choose the sleep tab and he's fine, leater but10 to 15 minutes, I forgot something and I wanted up, after the start I heard my lap top speed and good early but the screen is pitch black, no company logo and nothing! I've noticed that only a seeing of CAPS LOCK button is on and outside. My question is what is the problem, I hope that no Virus! Or I had to close something? How can I start my lap top once again? Help, please!

  sincerely

  Zoltan

  Try a hard reset:

  http://support.HP.com/us-en/document/c01684768

• Control LCD screen flashes on and outside

  Hello
  I have a 6 yr old HP w15e LCD monitor, it is quite old. But recently, it's showing strange things. Whenever I turn on the power to the monitor with or without the CPU video input, continuous screen blinking on and outside (I think there are two seconds between the two slot and power off).
  I tried different power cables, but still screen flashing. So help me to record this thing.
  Thank you.

  Hello @shan678,

  I understand that your w15e HP LCD monitor continues to blink off and off and you seek help to fix. I provided you with a few steps, you can try below:
  
  Step 1. Unplug the power cord at the back of the screen and the wall
  Step 2. Press and hold the power button for at least a minute
  Step 3. Plug the power cable in the monitor, and then to the wall outlet (not a power bar or surge protector)
  Step 4. Press the Menu button on the monitor
  Step 5. Navigate to the factory reset option and select
  
  If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. If not I think it would be preferable that you contact HP Support for service options.
  
  Thanks for posting on the HP Forums. Have a great day!

• Winner 8,1/firefox there are tabs above and below windows. In Win 10/firefox, there is now windows below for switching windows - how can you do that now?

  n Win 8.1/firefox it were the tabs above and below windows.
  Win 10/firefox, there is now NO windows below for switching windows.
  How to you switch windows (tab groups) now?
  Windows Firefox 39.03 10

  On the first program that I started after the launch 10 new windows, I can't do what I have been doing it for years and I can not understand.

  I hate the changes of major operating system.

  plugins installed

  • Adobe PDF plugin for Firefox and Netscape 15.8.20082
  • Garmin Communicator plugin 4.1.0.0
  • GEPlugin
  • Google update
  • HPDetect
  • Deploy Script NPRuntime plugin Library for Java (TM)
  • Next-generation Java plug-in 11.40.2 for Mozilla browsers
  • Plugin to detect Nero Kwik Media.
  • Nitro PDF plugin for Firefox and Chrome
  • Shockwave Flash 18.0 r0
  • VLC Web Plugin 2.1.3 media player
  • Detector of presence of WildTangent Games App V2
  • NPWLPG

  Is the problem that the Windows task bar is hidden by the Firefox window, or that changes to the taskbar make it impossible to change the windows?

  If the taskbar are hidden by Firefox, it is possible that Firefox is in full screen mode. The F11 key toggles between full screen and normal views.

  Another potential problem is that Firefox sometimes seems to collect data of erroneous screen size of the operating system and that the window of Firefox too large. You can rename the relevant settings file to see if that helps.

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  To restore the missing bars, you can use one of the following methods to view the list of the toolbar, and then select the desired bars it:

  • Right click on a place empty on the tab bar (or the button '+')
  • Press the Alt key to activate the classic menu bar > view > toolbars
  • in customize mode > show/hide toolbars (see: Customize Firefox commands, buttons, and toolbars)

  To activate the menu bar, toolbar bookmarks or other bars, click it in the list.

• Delay between angle and entered analog on a 6221

  Hello

  my test setup consists of a (8184 current run LabVIEW RT) embedded PXI controller which uses a PXI-6221 of data acquisition. One of the outputs analog of the 6221 creates a demand for speed that is sent to a servo controller. the servo drives then the test configuration. Between the servo and the remaining test configuration, a quadrature encoder is located. Both the 6221 meters are used to measure the position of the servo (using the trains of pulses A and B) as well as the speed of the servo (frequency of A pulse train). In addition to these counter inputs, some analog inputs of the 6221 serve as well to recored the configuration of test signals.

  In this configuration, one of the analog signal has a frequency of n periods per revolution of servo (determined by the mechanical design of the test facility). But when I leave the servo turn to for example 100 rpm, then decelerate from status quo with a constant deceleration and then draw the analog signal against the measured angle, I see clearly that as long as the speed is telling, I n periods per turn (or a passage from my analog AC to zero each 1/2n towers); However, as soon as the slowdown begins, the plot gets stretched along the axis of the angle (so the plot tells me there are less than n analog periods per turn, which is impossible because it would require the mechanical destruction of the facility).
  However, I can calculate a position based on speed information signal, as I got to the second counter (by integration of the speed). When I do this for the above velocity profile and draw the analog signal against the calculated angle, I see exactly n times / revolution, no matter how fast the installation program is rotating (just the expected behavior).

  So, apparently, the speed measured is "in phase" with analog signals, while the measured angle has a "phase error. Draw the angles measured and calculated against the time tells me the same thing: the measured angle is always late (compared to the calculated angle). The period is not constant throughout the measurement; I've seen values between 30 and 170 ms within a single record. Due to this change of variable, inserting a delay for all channels, but the angle is not a great idea.

  Unfortunately, calculation of the position of the speed signal is no option for me, because the direction of rotation is changed during measurement; because speed information I have based simply on a frequency of pulse train, it contains no information management, therefore a calculated position would be unaware of the changes of direction.

  Does anyone have an idea whence thios delay and what I can do to fix this problem?
  Try a position different methods of decoding or exchanging the meter channels has not made a difference.

  Thank you!

  Hey Kevin,

  attached you will find the last block diagram (no new translation this time, since no changes have been made that require a), which includes your last suggestions (explicitly start the task of AI, remove the excess constraints) with a flat sequence structure that applies all the preparations of task to finish before the start of the first task (I know I could have achieved the same effect of intelligent routing of the signal error, but I think the code is) better readable this way).

  Without OPI, LabVIEW tends to start to have, ao and tasks of the angle of the very different moments, which (for some reason that I don't understand - we have a sample clock based calendar here, and the sample clock is run, well after the three mentioned tasks...) tends to cause delays in the order of several 10-100 ms between tasks. With the structure, this problem is eliminated.

  The Sub - VI just above DAQmx writing contains the "conduct" code that I used in the last screen shot to "serialize" the requested speeds - in this way, the table that contains the requirements of speed does not need to be rebuilt.

  The code that creates a weather channel frequency implicitly timed measure left the VI shown here in a second VI that is running on the host computer, because everything that involves a calculation and does not require any intzeraction with the DAQ hardware is better placed there (the 850 MHz on the PXI controller celeton is slower than 2 definitiely something host GHz Dual-Core system).

  The behavior you mentioned for the task "not started" HERE is what wrote using LabVIEW. I thought the block of relaxation that I had at the beginning would treat the start of the task - at least, the code like this figure repeatedly in the examples that come with LabVIEW.

  I don't really understand what has caused the problems I've had - it seems that it was the combination of the measure quickly loop iteration with the start of task based on trigger HERE, but I do not understand what are the mechanisms in the background caused the problem (too forced loop was not the cause; the same block diagram works well with an additional loop timer).

  If the solution was composed of the following steps:

  -remove the old code calculating speed, replace it with a better code out of the main loop. This allows to

  -reduce considerably the frequency of the main loop.

  -Pull the DAQmx writing out of the loop, and

  s ' ensure that all tasks are started explicitly just before the main loop starts to run.

  -Possibly remove excess constraints of the main loop.

• Photosmart C4480 - sharing between XP and Vista problems

  I have my Photosmart C4480 connected via USB on my desktop running Windows XP. I have a home network set up between the desktop and my laptop running Windows Vista 32-bit. Sharing works files and the computers can succesfully mutually ping no problem.

  I have the printer to share in XP, but Vista does not see the printer on the network. I installed the printer drivers on both computers.

  I know that's not where he's going, but maybe someone will read it. I called the technical support and spent 57 minutes on the phone and got anywhere, not less than 40 of the 57 minutes were spent in complete silence. The only stage of the tech support rep asked me to do is to download the latest drivers on the laptop, but then me has said he did not install. After 57 minutes, he sent me an email with a link to the plug of the printer. He asked me to read him what it says beside 'Connectivity' which of course was USB 2.0. I had already tried to explain once Mr the difference between a printer wireless and a shared printer on a wireless network. Clearly, he never had the image. After reading the option of connectivity USB 2.0 for the guy, he noted that the printer could not be used on any wireless network. So frustrating. Very, very disappointed in HP technical support. Very, very unlikely that I buy another HP product.

  Someone help me please.

  I'll pass by this very detailed and try to think you don't know what you're doing so that the directions are clear and easy for anyone to understand.

  1. you must first install the printer on the computer on which it will be connected to via USB (Windows XP computer in my example). Follow the exact instructions that came with the printer for best results. The directions are simple and clear and the steps must be performed in the order that they advise for a correct installation.

  2. After you have the printer installed and working properly on your computer, the printer is directly connected to via USB, use the installation CD to install all the drivers on the computer you want to access the printer over your home network (Windows Vista computer in my example). When you put the installation provided in this computer CD click on Install or Setup or anything else that is similar in option you are given in the menu. When you get towards the end of the installation, Setup prompts you either to connect the printer to the computer or to continue and complete the installation without connection. You want to complete the installation without the printer connection.

  3. now that you have all the appropriate drivers installed on computers you want to set up your network. On the computer on which the printer directly connected (computer Windows XP in my case), you want to run the Network Setup Wizard to set up the printer share. In Windows XP, you want to click on start > my network places. This will open the my network places window. In this window on the left side, you should see a few options in the section "network management". Click 'set up a home or small business network. This will open the Network Setup Wizard. You will notice that one of the bulleted items listed for what you can do with a network is "share a printer. Follow and complete all the steps in the Network Configuration Wizard. When you are finished, your network must be configured and ready to go.

  4. now you want to turn on sharing the Photosmart C4480. Once more on the computer on which the printer directly connected via USB (once again, the Windows XP computers in my example), you want to click on start > Control Panel > printers and faxes. In this menu, you should see your newly installed Photosmart C4480 printer. Right-click on the printer and select "Properties". This will open the window properties of HP Photosmart C4400 series. You will notice that the window has several tabs at the top. Click on the "Sharing" tab, select "share this printer" and name the printer in the "share name:" text box. Do not the complicated name. I used "HP C4480" for mine. Click 'OK' to close the window and save the changes.

  5. you need to know what the IP address of the computer with the printer connected directly via the USB port, so that we can ensure that your network is configured correctly and that the other computer (Windows Vista in my example) is capable of good communicate with the Windows XP computer. On the Windows XP computer that is connected to the printer, click on start > all programs > Accessories > command prompt. This will open the command prompt window. Type "ipconfig" and press ENTER. This will show you your IP address, subnet mask and default gateway. Note your IP address. There will be a series of four numbers, separated by three points (for example 192.178.1.2). You can close the command prompt window now.

  6. now you know what the name of the computer is on the network. Click the Start button then right-click on "My Computer" and select Properties. This will open the "System Properties" window You will notice that there are several tabs at the top of this window. Select the "Computer name" tab The name of the tab may vary from one computer to another, but there will be a tab named 'Computer name' or 'Network name' or something similar. Select this tab. On this tab, you will see "full computer name:" and then to the right of that will be the name of your computer on the network (the computer DESKTOP for example). Note that. Click 'OK' to close this window.

  7. now you are done on the computer on which the printer directly connected via USB. Get on your other computer (Windows Vista computer in my example). In Windows Vista, click Start > Accessories > command prompt. This will open the command prompt window. Type "ping IP address" and press ENTER. Put your IP (e.g. 192.178.1.2) where I typed "IP address". It tests communication between computers and display the results when the test is performed. If all goes well, it will say something like 4 packets sent, 4 packets received, 0% lost. If packets have been sent but not received then you have a network problem which must be settled before the printer you will work.

  8. assuming that the ping was successful, you are almost finished. Close the command prompt window. Always on the Windows Vista computer (the computer not directly connected to the printer via the USB port), click Start > network. This will open the 'network '. Now your computer will search and display all present on your network. It may take a minute or two so be patient if nothing appears immediately. Finally the name of the other computer should appear (e.g. OFFICE). Double-click the icon above the name of the other computer. This should now show a list of all that on the other computer on the network. The common things to see here are printers and a "SharedDocs" folder You should see that the listed here HP Photosmart C4480. It is listed under the name you gave to the printer in step 4 above. Right-click on the printer icon and select 'connect '.

  9. This will open the "Windows printer Installation" window and says "connecting to the PRINTERNAME on computername. I don't remember exactly what happens the first time you do this, but it can ask you for installation and others. If so, just follow all the steps, it gives you, and he needs to connect to the printer.

  10. at this point, you are ready to go. You should now be able to open Microsoft Word or another program and print on the printer HP Photosmart C4480 from the Windows Vista-based computer on your network. The Photosmart C4480 will very probably not already set as the default printer so you will have to select in the menu of the print window in the "Printer name" drop It can open a window saying that the computer connects to the printer when you do this. After that when you click on print, your document should be sent on the network of the Photosmart C4480.

  11. If you want to set your Photosmart C4480 printer by default on the computer, it is not directly connected to (Windows Vista computer in my example), click Start > Control Panel. This will open the Control Panel window. Under the heading "Hardware and sound", click on "printer".  This will open the Printers window. You should see the "HP Photosmart 4400 series on ComputerName" icon in this window. Right-click on the icon and select "Set as default printer". After that, you should see a green and white check mark next to the icon of the printer. The Photosmart C4480 is now set as default printer on the computer, and whenever you print from any application will automatically be selected Photosmart C4480 printer.

  Hope all that made sense and solves your problems. If you please, after back and let me know if make you it work, or if you have other questions. I'll be more than happy to try to help!

• How can I communicate between MUSE and animate CC OEM element?

  Hi all

  Please let me know how can I call the Muse javascript function (written using the object > option Insert HTML code) by a click of a button.

  This button has been designed and coded using CC animate and its OEM file has been imported in MUSE.

  Basically, I'm looking for a solution communicate between MUSE and OEM, and vice versa.

  Help, please!

  Thank you

  AshishK

  There is no adequate way to do file OAM control over site of muse. In fact, even a simple button OAM is a html document independent, which has a head, body and its own scripts and html code. OAM - is a site within your site are located in an iframe. This format is used for banners and animations for beauty, but not for the features. If you need the functionality, you must export your animation in html and javascript, disassemble the part code and integrate the muse - something on your mind, in the body. And of course, you have to understand with in the code. But even for a experienced, coders this approach would be absurd. It is easier to make a simple button in cssto integrate this a whopper for the site, which would create a disproportionate burden