PIX 515E (7.0.1) - problem with the VPN connection between inside and outside

Similar Questions

• Problem with the sharing printers between WIndows & and Windows Xp

  I have a laser printer HP 1150 connected by USB on my computer Windows 7 (Home Premium 64-bit). I want to share with another pc with Xp Pro (SP3), but can not find a suitable printer driver. I read the thread on the sharing of printers and led most of the steps.

  My problem is that, although I can see the printer of the xp machine, it requires a driver. I had already installed the drivers from HP and the printer works fine by direct USB connection on the XP machine, but it appears that I need a driver installed on the W7 machine as well - and I can't seem to find one that works.

  Any ideas what to do?

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=238318&lang=en&cc=au&prodTypeId=18972&prodSeriesId=238316&TaskID=135

  Check HP drivers at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads

  Windows 7 Networking Forum at the link above.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the Internet connection using IE7 and Windows Vista

  Hi all

  I don't know if I'm in the right forum, but I need someone, help please...

  I just bought a new XPS420 with Windows Vista Home Premium and IE7 already installed.  The 2-3 days, internet worked very well.  Now, whenever I open IE7, I get a message on the connection not found or something like that.  I did some research and some forums suggest to reset IE7 using Tools/Internet Options / Advanced.  It worked... but only temporarily.   After that I turned off my computer and turned back on later in the day, open to the top of IE7, it does not work yet.  If I turn off the modem, it does not.  If I do a reset, as shown above, it would work again.

  I finally called AT & T Tech support, but they could not diagnose the problem.  While we were on the phone and try to open and close IE7, and that is, I logged.  Then to test, I turned off the computer and turned it back on and of course, internet Explorer did not work.  The AT & T guy me open system information to check the properties of the network and all said that "this device works correctly.   He also suggested to disable my anti-virus program (I have preinstalled MacAfee), which I was very reluctant to do. So before you disable MacAfee, I tried IE and it worked, so I was happy.  I closed the browser and open it again and it worked; turned off the computer and turned it back and the browser did not work.  I already lost count how many times I had to do that!   When I click on diagnose the problem, I got a message on xxx.xxx.x.xx DNS. do not answer, as the server ping the remote host, but does not got a response.  On hearing this, the representative said that it must have something to do with Vista and that perhaps the OS has not been installed correctly and he suggested that I contact the place where I bought my computer and ask them to reinstall.

  He also asked me to install Firefox as an alternative.  When I did, it worked.  But IE7... at the time.  I could not afford to shut down my computer once again because I was already late to work, but I guess I'll find out later. But maybe I have to use Firefox if IE does not work.  I have not really tested who. Is the thing with Firefox, it is not compatible with our applications work as well as web pages, I am trying to access (I tried one before I left) a work t look the same and difficult to navigate. And it shows "protect on" on the lower right of the browser that performs the same way, he shows up on IE.

  Sorry for the long post, but I also need to evacuate.  The resolution could really be as simple as turn off the anti-virus?  But then, how to get us protected?

  Help, please!  I'm so desperate for a solution.  My mother also uses this computer to access its work files.

  Thank you
  Remms

  
  

• Problem with the published parameters between the movement of FCPX

  Hello

  I have a little problem with the settings published between the movement at FCPX.

  For some reason, the published parameters have different values within FCPX in movement.

  For example, in motion, a parameter is - 187.04 and in FCPX is-0,19. What are the parameters of position for CSOS.

  If I try to change this setting in FCPX, the application crashes after 10 seconds or less.

  No idea what is causing the problem? I re-edited the effect several times, same result. The software that I use is FCPX 10.2.2 and 10.2 of the Motion.

  MOTION

  

  FINAL CUT X

  

  Thank you.

  The values that you have published on the move have been compared to this project that you created. The values shown in FCPX are "consistent" with any project that you create. Often, you will see the center screen is 0.5, 0.5. Left and below are 0, right and up are 1.0. Or you could see Center of 0.0 and a range between - 0.5 and 0.5. Sometimes, you will see the numbers on the scale of some sort of percentage (vertical values will be 0-100 [%] and the horizontal will be based on the aspect of the project, for example, horizontal will be between 0 and 177.7778 for a project of 1920 x 1080, etc..) It will depend on the type of object and the parameters associated with what you posted.

  If you want to "correct" values in FCPX, you will probably need to rig settings, otherwise, just live with it.

  For what is * why * your model crashes FCPX, that will be another reason and not the difference in the numbers. So, can we get more information on the model?

  To use specific fonts?

  You publish alterations settings?

  Anything out of the ordinary?

• Problems with the internet connection, Aspire V15 - V3 - 575G

  Hi, I bought a new laptop and have problems with the internet connection without having to install other programs.

  The problems are the following:

  • I use an ethernet cable to connect and just after passing on the laptop, there is no Internet connection at all. I have to restart the router to do.
  • When downloading or uploading brokes down at intervals of 30 seconds - 1 minute. It is not always the same. Sometimes it works 3 minutes, but it is not enough.

  He has Win10... With my old laptop with Win7, I had no such problems. I do not change ISP.

  I don't know what to do to fix it. I have not tried to uninstall Acer applications yet. Have you experienced something similar?

  Thank you very much for the reply.

  Plese try this:

  device, right-click on your network card Realtek Manager choose uninstall and tick to uninstall the software if requested, restart, and then try again to install the downloaded driver.

• Error - Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Cannot read any DVD.

  Original title: unable to play any DVD

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I tried to update all the drivers but the problem persists

  Hi Neil,

  1. have you made any hardware changes or software on the computer before this problem?

  2. what version of windows Media Player do you use?

  You can follow this link & check if the problem persists.

  Windows Media Player Error Message help

  
  Reference: How to troubleshoot issues that occur when you play a DVD in Windows XP?

  Hope the helps of information.
  Please post back and we do know.

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't play DVDs in Windows Media Player 12 on Windows 7 Pro and get this error msg: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  Hello, thanks for reading and helping me.

  I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional.  The DVD worked a few days ago, but all of a sudden, I get the following error message:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I did a lot of research of these forums and on the ' net.  Here are the suggested steps I tried without success:

  • I tried VLC player.  This works.  However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
  • I tried several DVD for years over the last decade.  These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
  • I uninstalled my Shark 007 codec
  • I tried other codecs (K-Lite)
  • I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
  • I tried to uninstall Nero 9
  • I tried to use the Windows 7 troubleshooting options:
  • > Reading and burning CD, DVD and Blu - ray (no problem)
  • > Windows Media Player DVD (no problem)
  • > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
  • A system restore to a time when the DVD was working did not resolve the issue
  • The different links in Microsoft, I found in this forum about this problem do not seem to be useful.  There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
  • I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
  • I assured that the latest firmware is installed directly from the manufacturer's website.
  • I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
  • I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.

  I would be very grateful if a Microsoft technology could chime.  Thanks for your help!

  MY COMPUTER:
  DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
  Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
  Graphics card: XFX ATI Radeon 5850 Black
  Motherboard: Gigabyte GA-X58A-UD3R
  Processor: Intel i7-920

  -Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case

  Hello

  Try this free program:

  http://www.DVDFab.com/passkey-Lite.htm

  Carlos

• After you have uninstalled an editor audio wave cushion, my DVD stopped playing with the error: because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  ================================================
  If the uninstallation of software caused the problem... it may be worth trying to
  do a system restore to a time before the software has been uninstalled:

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Browse catalyst prepared - export between inside and outside as in the catalyst?

  Hello world

  Dear people of Sony, is possible to add a feature to export / trasncoding files between In and Out marks only as in catalyst go? Was surprised not to find, very handy when there is a large file that has two or more WB settings required, to export part of the file with the parameters a, marking the section with inside and outside and then adjusting those yet to export the or other parts of the shooting with an another WB settings?

  I know there is a feature to copy sections of the files ' between inside and outside "only but it would have been more convenient to have it as in catalyst browse my humble OPINION."

  Or is there a simpler workflow that I'm missing out on?

  See you soon

  Max

  P.S. Thanks to solve the strange Maj WB problem that I reported earlier, Travis and team, I have since reinstalled catalyst prepare 2015 and in awe of the capabilities of the software. Great job.

  Hi maximdryginsony:

  Thanks for the question.

  I think the function of catalyst to prepare that can solve your problem is a subset of creation. What you can do is put an In/Out point with a WB setting, and then click Log. Create a subclip (see screenshot). This will create a subelement with the color settings.

  

  -Travis

• Problem with the network connection security

  When I try to view certain websites, I get an error message that says: "there is a problem with the security of your connection Metwork. In addition, a friend just sent me a copy of an e-mail that was sent to him. Apparently, someone must have hacked into my email account, has obtained my contact list, created an e-mail account using my name and sent e-mails to people on my contact list.

  How can I fix the problem with the warranty of my network connection, and what I can do on the pirate e-mail contacts list?

  Can you give an example of the websites that you see this 'error' on?

• Re: Satellite C650 - problem with the devices connected to USB ports

  Hello

  Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

  The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

  The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
  Thanks in advance

  Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

  Post edited by: leahhw123

  Hello

  What happens with plug n play like USB mouse device?
  You are able to use an external USB mouse correctly?

  > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
  I guess this could be a problem with the software or drivers installed.

  I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

  In addition, you can try to install this software once more, check whether this USB problem appears again.

• I have a problem with the previous results of LEDs and indicators of compensation

  I'm working on a proper VI for my building project, but there is a problem... The project here is to define the occurrence of the error and the error type to decide what actions are required to protect the circuit. This isn't a problem here...

  The problem is when I run the VI for the first time... Everything is good and I got what I need... But when I run it after that... The new results to come out with the results of the first round... So my problem is with the previous results of LEDs and indicators of compensation

  Hope my question is clear and not confusing

  Well, show us a code instead. How do you call the VI?

  Have you tried the option: "properties of the VI... run... clear the flags when called?

• Problems with the windows player video media and internet explorer?

  Original title: Windows Media Player

  I have Windows Media Player 11. I can't play the videos with her. Videos MSN don't is not at all and YouTube loading starts playing and closes exactly 11seconds every time regardless of what particular video. I recently updated my IE 8 browser and tried to use Microsoft Fix it Center Online. It has fixed some problems but not this problem. Any ideas out there? Thanx.

  Hello

  (1) windows operating system you are using?

  (2) have you made changes before the start of this issue?

  (3) what is the exact error message or error code?

  (4) what type of video file you try to play?

  (5) in difficulty he makes you run?

  Step 1: Search for the codecs

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  For reference:

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  According to the problem with the playback of videos in Internet Explorer, try the steps in the following article

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

• problems with the internet connectivity and card # 2 microsoft tun miniport

  Hi, I have problems to connect to the internet and my laptop tells me them a problem with the modem / router. However, another laptop computer connected to the modem/router even works very well. in the Device Manager was an exclamation mark beside "teredo tunneling pseudo interface 10. then it disappeared and I found myself with an error with «#2 microsoft Tun miniport map» now his party in error teredo. I still only have a local internet connection i.e. no internet. not really have a lot of knowledge when it comes to computers. any help would be really appreciated.

  Hello

  You can try the steps in the similar thread to the next with a possible fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Teredo-tunneling-pseudo-interface-this-device/757db042-c91e-464c-B963-c1f442fdf925?page=1