Animation Flash pictures

Similar Questions

• Animations Flash of DPS are triggered too early...

  Hello..

  I'm building a small "DPS-brochure" in InDesign, use of the Foilo generator.

  I've done a few animations-flash (web-content-overlays), which are auto-déclenchées when you enter a page.

  Everything works fine, except for one small - but important: part.

  The first animation on page 1 film works very well. But when drag page 2, animation shild is already triggered... Sliding fast back to page one and then quickly to page 2, I can see the last part of the animation... It seems that the animation of triggers Animation 1 2...

  The strange thing is that when you place an article without animation, between the two, everything works a charm...

  Do you have ideas of how to solve the problem...?

  All animations must be set to play with a second delai.125.

• Animation Flash not appearing is not in IE8

  Hello

  I have an animation flash on a login page appears so fine in all browsers apart from IE8 (surprise!), where I see a red cross within a square. You can see what I mean if you look at the page in Internet Explorer:

  http://monthlymixup.com/index.php

  Here is the code:

  

  The film was created in Flash 10 with ActionScript 3. Anyone has any suggestions as to why it is not working in Internet Explorer?

  Thank you

  Nick

  You must also include the name of the file as a param for IE to find:

  Best wishes

  Adninjastrator

• Animation Flash blocks Drop-Down Menu

  I added a simple animation flash (slideshow) to a site, I'm working on which is located under the navigation bar which has a menu drop-down (created in Fireworks). When I saw the site in Firefox or Internet Explorer on a PC, the menu drop-down is behind the flash animation and all links are invisible. Is there a simple solution to this problem?
  
  Thank you
  Troy

  "FlineCo" wrote in message
  News:gopblq$C47$1@forums. Macromedia.com...
  > I added a simple flash animation (slide show) on a site I'm working on
  > that is
  > located under the navigation bar which has a menu drop-down (created by)
  (> Fireworks). When I saw the site in Firefox or Internet Explorer on a
  > PC,.
  > drop-down the menu hides behind the flash animation and all links
  > may not be
  > view. Is there a simple solution to this problem?

  Google "wmode" and use opaque

  --
  Thierry | Adobe Community Expert. Articles and tutorials:
  http://www.TJKDesign.com/go/?0

  Widgets Spry | http://labs.Adobe.com/technologies/Spry/samples/ [click on]
  'Widgets']
  Samples of the Spry menu bar |
  http://labs.Adobe.com/technologies/Spry/samples/menubar/MenuBarSample.html
  --

• [Flash Pro] Motion tween is added an animated GIF picture

  * FIRST - I couldn't find one

  Hi, I'm working on a school project and we have recently I do an animation before Monday.

  So my problem is that I have a GIF of a man walking (which already has images by default to make the man walk) and I can not add a motion tween.

  So we learned essentially to take a car for example. We import a photo of a car (non - gif; no pre animated movement) and select it. make a symbol (video clip), then click on frame 30 and "Create motion tween" as we moved the image to the end; What makes a path automatically.

  But here, I can't do that because when I import the GIF man walking, he already has lots of raster data built in front to make the moving man and I cannot understand how to really add a motion tween to make man to move (of course with its PRE-BUILT animation [gif makes the arms and legs move]) and make him cross a road I built. So basically I want the man to move from one end to the other using a motion tween (or if there are other ways to do?) and alongside with its GIF data that moves its arms and legs.

  Small SS of my calendar:

  http://prntscr.com/b2qqwa

  as you can see here; the second element/first layer called "anyone walk - 1" is a GIF image and when I load it, it loads its pre movements animated and I can't create a Tween to make humans image cross one end to the other with her has pre-built ones again.

  Long, but I tried to make the Guide and all other acts and I tried Googling my head, spent 4 hours and found NOTHING. ABSOLUTELY NOTHING. And our teacher didn't us really learn this type of concept and neither do I class before it is due, so you are my only hope.

  Thank you.

  See if you can follow these steps:

  Right-click on the name of the layer to the market-1 person.

  Select the copy layer.

  Go to the library and click right in and empty the part of the library window and select new symbol. Will it be a movieclip.

  Now, you will be inside this new movieclip. Right click in the layer 1 name and select the layer of dough.

  You now have a moveiclip of your person walking. Go back to the top level of the scene and make a new layer.

  Drag the new movieclip on the stage.

  You should now be able to add a motion tween to this new layer. So who has worked, you can delete your original person market-1 layer.

• Can I use animation Flash CC HTML 5 Muse?

  I noticed that CC Flash now has a canvas of HTML 5 for files.

  If I create an animation of HTML5 in this - is there a way to use this HTML 5 animation in muse?

  When I publush, I get a .html file and also a .js file, but none of this are importable to dream I know.

  Is this possible?

  Hello

  Yes, it is possible to use these files in muse. There are a few steps that you must take in advance.

  1 import the .js files in muse from file > add files to download... (Make a copy of Js file will create in the active tab of the muse).

  2. open the HTML file in Notepad and copy the code.

  3 RETURN to muse and use Insert object HTMl code > insert HTML and paste code copied into the window.

  4. now you must make some changes in the Code according to the imported .js files.

  5. Add "\-assets\" before the names of the Js files in the code. (Look at the screenshot of the example)

  

  Now, if you try to watch it work.

  In case you have used pictures and videos as HTML5 canvas then you need to do the same with the imported file (you must import them into Muse, as we did for the Js file) and will also have to make changes to the location of the file (video, image) in the JS files (must add "\-assets\" before the name of the file).

  Please let me know if you have any doubt with the steps.

  Concerning

  Vivek

• Animation Flash URL problem

  My site uses certain URL's long and ugly to access different documents, pictures, flash animations, etc.. For example:
  
  http://documents.ClubExpress.com/documents.ashx?key=8%2bcj2Xcfx8XgKDfBF6900BGcQbdbjD9K247r aBterH6wx9LO6lpFvjuys09bcMaE
  
  It is a valid url for a valid swf - I can download and play directly (should be on a line without spaces). However, if I use this url in the usual < object > and < embed > tag, it won't play in a web page (the Player loads, but it says "not loaded a movie"). If I move the file and change the tag to use a single file like "\flash\movie.swf" it plays properly.
  
  So, I know that the tag is correct, since it plays the movie with a simple url. I know that the swf file is valid because it can be played. I know that the ugly url is correct as it downloads the correct file.
  
  The only explanation I can think is that there is something in the ugly url that confuses the flash player. Sometimes these things work, then maybe a specific url character a problem (% sign maybe?).
  
  Anyone can shed light on this issue?

  Oh, I did a little more research and found this article on devnet:

  Quote:
  Since version 10,0,2, if Flash Player sees a "Content-Disposition: attachment" header when a SWF file downloading, it ignores the SWF file rather than playing. Note that this restriction applies only to SWF files and not to other types of content, such as images, sounds, text, or XML policy files files, etc.

  If you control the HTTP server where the SWF resides, determine if you trust the SWF file to execute in the server's domain. If so, remove the "Content-Disposition: attachment" header by changing the configuration of your HTTP server.

  Looks like you need to remove the header Content-Disposition :)

• animation Flash in Director heard but not seen... especially not seen!

  Using flash I made a flash animation to use as an intro to my project manager, I imported the flash animation Director and placed on the stage. When I play the director file I can hear the sound of the flash animation but can not see the flash animation, until near the end, that I have a picture on a motion tween in the flash animation that I can see.
  
  Can someone tell me why I can't see the rest of the flash animation?

  Hi Ajrobson,

  I guess you are using Flash 8 and that you have not successfully steering updated for Flash 8
  compatibility.

  Reach:
  http://www.Adobe.com/support/Director/downloads.html
  Make sure that you have downloaded and installed the 10.1 update. Then install the 10.1.1
  Update. This will update your Flash media.

  concerning
  Dean

  Director Professor / Consultant
  http://www.FBE.UNSW.edu.au/learning/Director
  http://www.multimediacreative.com.au

• ANIMATIONS AND PICTURES ONLINE

  MY ANIMATIONS ONLINE AND FACEBOOK PHOTOS ARE NOT VISIBLE > I UPGRADED THE DRIVE FLASH, BUT NO CHANGE > WHAT CAN I DO? WINDOWS XP

  The Texan salvation,

  -How long have you had this problem?

  -What web browser do you use?

  -If you use Internet Explorer (IE), what version of IE are you using?

  If you use IE, follow the steps below:

  Method 1:

  Uninstall Adobe Flash Player, download and install the latest version of Adobe Flash Player and see if that fixes the problem.

  Method 2:

   

  Optimize Internet Explorer settings and check if this solves the problem.

  See How to optimize Internet Explorer

  Note: The article above is applicable to Windows Internet Explorer 7 and Internet Explorer 8.

  Disclaimer

  Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Animation Flash HTML5 in Dreamweaver integration?

  I did a little work with edge animate and found it easy to implement an animation in Dreamweaver.  However, my latest animation had to be done in Flash (and I know that the software a little better) and I realize that CC has now a HTML5 canvas.

  So if I create an animation in Flash CC on a html5 canvas, how I would go about using a dreamweaver page?

  Or I'd better ask in the flash forums?

  Thank you in advance!

  Edge Animate has AutoText features in DW.  Unfortunately, there is no provision for the HTML5 Flash animations again.  If you must do this manually in code view.  Take the Flash compiled code and insert the relevant items in your existing HTML5 document.  Make sure that the paths to the JavaScripts and CSS files are correctly pointing to your site folder and not files: / / / on your hard drive.

  Flash/SWF is not supported on mobile/tablet devices.  This is why Flash/SWF is a web technology dead.

  Nancy O.

• Overview of the animation Flash is all white

  I use Flash CC on a windows computer. My document is a HTML5 canvas. I have my all finished animation, except for the button action. I tested the animation before you add Actions and that it appears in the browser fine (I used both Chrome and IE). But when I add in the Actions of the button to go to another web page and test it, the animation turns all white. I used the code snippet "Click to go to Web Page", while the button is selected.

  I looked at several different sites and books and looks like I'm doing everything right. But my test shows just a white box.

  In the output is the following:

  WARNINGS:

  Supported text is limited. It is generally recommended to include the text as HTML (see DOMElement) elements. (6)

  In EaselJS frame numbers start at 0 instead of 1. For example, this STOP button and gotoAndPlay calls. (2)

  Happy with the two Bitmaps and buttons can generate errors of local security in some browsers to run from the local file system.

  The motion tweens are published in the form of animations frame by frame. Use Classic tweens where possible. (15)

  I thought about it! I used the code snippet in the ActionScript, not HTML5 file folder. When I went there it works fine!

• Export html canvas animation Flash... receptive CC?

  When you export Flash CC animations like html5, can you do the code responsive resulting?

  Looked at the html + tried to change:

  < canvas id = "canvas" width = "980" height = "579" style = "background-color: #5F5F5F" > < / canvas >

  TO

  < canvas id = "canvas" width = "100%" height = "100%" style = "background-color: #5F5F5F" > < / canvas >

  as well as trying to "exactfit" and "*", etc... But each of these attempts of a malfunction of the size.

  It would be great to be able to export html5 Flash animation and have the means to make them sensitive. It's perhaps easier to do with edge animate - but can be done with Flash, too?

  Thank you!

  There is a resize event, spoken here:

  Make the sensitive canvas size / CreateJS / Discussion area - CreateJS Support

  The simplest solution is to put all your Flash experience in a movieclip, while on stage, he is just a movieclip. When there is a resize event you can scale the movieclip to adapt to the new area and whether you can use the code to move the items to the new space.

• Set the range of images to the gif animated Flash

  Exactly what the title says it is far from limiting what frames get sequenced off Flash during an animation. GIF? With one. SWF, I simply write a stop(); action on the last frame, but the. GIF cares As there is nothing in publication for setting a range settings. GIF.

  No support of the range. You will need to adjust well with another program, especially the one who supports the directives of GIF animations as stop and loop X times, like Fireworks, etc.

  I'd be a real problem, but you can convert the motion tweens in animations frame by frame (right click on a motion tween, the option is there). You can then cut out frames on each side. It is however is a rather messy solution.

• Interactive animations Flash from Adobe can be incorporated into indesign DPS?

  Hello...

  I want to know if I can create my interactive flash animation in an application offline via DPS indesign? Is it possible to embed the flash file in indesign?

  Thank you

  N °

• Animation flash automatically close when finished?

  Hello

  So I'm pretty new to flash.  I did a fast fade, animation melted that I would put on an interactive menu in.  So when people loading the home page, quick animation games, then disappears showing the interactive menu behind her.

  Problem I have is that the animation fades completely (using tweening and alpha 0), but once that he "disappears", I still can't click on anything in the menu.  I guess even if the animation seems to disappear, it's really only invisible and always present, it is impossible to click on what is behind it.

  So I wonder if there are any script/code I can use not only making it fade away invisible, but also completely closes this animation when it is finished running.

  Any help is appreciated.

  -Mike

  What you've posted above seems good. As long as the playhead stops at the last image, you can be sure that everything that is on your menu is not the graphic that fades in and out.

  Yes you can have ask what himself removed. 'How' to do this is a matter of how you have your overall project put in place.

  If you have a main storyline that has this splash screen fade in/out animation directly on it, then I'm going to suggest a way. If this animation is loaded externally with code or a CFC, etc then it is deleted in a different way. You'll have to let me know your project setup.

  Meanwhile I have already answered this question before. If you scroll to the bottom of this thread and look at the code I give many examples of code and files to illustrate how to have a display object that is a request for the child to be removed from the parent company:

  http://forums.Adobe.com/message/4855804#4855804

  Note: Here are the versions of code to do. The version of timeline is simply to stop the playhead to where the layer that contains this animation has no frames or empty frames. It is actually removed, right here.

  There is a lot to read here, but the last absolute piece of code I posted is the easiest of all methods. Nevertheless, there are several to choose. See if one of those who works for you.

  The specific section of the code would be placed on the last image under the stop():

  MovieClip (this.parent) .removeChild (this);