Setup cannot copy the c_20936.nl file during the installation of additional languages

Similar Questions

• I get an error "Setup cannot copy the file els.dll" during the installation of Service Pack 3.

  The installation fails every time with this error. I can see and select the file in the temp folder, but it won't work. Any help would be appreciated. '

  Original title: 'Setup cannot copy the file els.dll' during the upgrade to Windows XP SP2 to SP3.

  In fact, I corrected it an hour ago and was meaning that close the message. I cleaned with CCleaner temporary files, downloaded the SP3 Installer on its own (no windows update) and disabled the antivirus. I was able to complete the installation.

  Thanks for the reply!

• Setup cannot copy the file hpinkins5412.exe

  Setup cannot copy the file hpinkins5412.exe

  Using full features software and pilot OJ6500_E710n - z_334.4

  When I use this version:

  full feature software and driver OJ6500_E710n-z_1315

  All software installs normally.  I get all the correct screens.  I connect to a network printer. He fined the printer. He asks me where (postcode), I use the software.  I re - start.  The drivers are not installed.  I have run the diagnostics.  He said that the drivers are not installed.

  HP Officejet 6500 has more 710n

  XP Pro sp3

  I solved the problem with the latest version of the software:

  full feature software and driver OJ6500_E710n-z_1315

  The pilot would not have installed.  I used this web page to fix:

  http://support.HP.com/us-en/document/c01084522

  Thank you

  Docfxit

• I am trying to format my PC and when the installer loads of my key USB Kingston, he said: Setup cannot copy the file XPtspCom.inf.

  Setup cannot copy the file XPtsp Com.inf

  Hi all!
  I try to format my PC and what configuration is loading my Kingston USB key, said he: Setup cannot copy the file XPtspCom.inf.

  I use Windows XP Professional Edition SP3.
  How do slove this problem please to continue to work with my PC?
  Thanks in advance!

  You should not use these programs, but if you want a USB key to install then you should make an ISO file and then using Unebootin according to me this is a best software to USB for xp and if you have windows 7 installed in one of your system, then you can use tool usb windows 7.

• Error: "Setup cannot copy the NTLDR file" installation of SP3

  original title: try to day XP Professional SP2 to SP3, but a 'copy' error "Setup cannot copy the file NTLDR.

  Try to XP Professional Service Pack 2 update for... SP3, with "The Wizard software update Installation" through "automatic Microsoft updates.
  Everything is going very well until a "Copy error" window saying:
  "Setup cannot copy the file ntldr.
  It gives 3 options
  1: "Retry" (does not work)
  2nd: 'Cancel' ('do you want continue Setup without copying this file?' by clicking 'Yes' gives 'Warning', "" If you cancel copying this file Windows might not work correctly. "") "Are you sure?) and
  3rd: "Browse..." So I just restart and... "The installer was interrupted..." Restore the previous configuration... "And here I am with sp3 refuses to read its own files!
  Any suggestions?
  Thank you

  PS. : Before installation I disable the Avast! Anti-virus service. No daemon or alcohol 120% installed.
  No other problem except when I try to update to the latest ATI AGP adapter CCC (catalist control center) I got a "failed to install".

  Information on the machine:

  Operating system: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.100216 - 1441)
  Language: English

  System manufacturer: Dell Computer Corporation
  System model: OptiPlex gx270s
  BIOS: Phoenix ROM BIOS MORE Version 1.10 A06
  Processor: Intel (r) Pentium (r) 4 CPU 2.60 GHz (2 CPUs)
  Memory: 1022MB RAM
  FG 0, 015 M/b: Dell Computer Corp.
  Chipset: Intel i865PE
  NorthBridge: Intel i865PE
  SouthBridge: 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge Disk Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) EIDE
  HARD drive: Maxtor 6E040L0
  AGP: ATI Radeon HD 2400 Series

  You can trust in the security of any computer used until you have formatted the hard drive & then did a clean install of Windows.

  Note: The free version McAfee to test which is preinstalled on the computer is now permanently disabled .

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to return the computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  PS: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• Windows xp sp2 Setup error: Setup cannot copy the file: usrshuta.exe.

  I want to install windows xp sp2 on the new hard drive and got the following error: Setup cannot copy the file: usrshuta.exe. How to do this?

  Hi grant561,

  Usrshuta.exe is a process belonging to the family of US Robotics communications hardware and provides additional support to the US Robotics modems.

  I suggest that you disconnect all external devices connect to the computer except the keyboard and mouse and proceed with the installation.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

• SP3 for Windows XP Home Edition installation failure. "Setup cannot copy the file wmpcd.dll.

  After that I bypassed this error, he continued to install SP #, but then could not find "wmi.dll',"msjet40.dll"and one bunch of others. Should I have to interrupt the installation?

  problem solver Windows xp service pack 2/3

  http://winhlp.com/node/125

  Give it a try and see if it solves the problem

  http://support.Microsoft.com/kb/950718

  http://lmgtfy.com/?q=slipstream+Windows+XP+Service+Pack+3

• When I try to install service pack 3 I get a message saying "Setup cannot copy the file c:\windows\system32\drivers\mrxdav.sys.

  He asks me to specify a location and also proposes to ignore this file that I don't know what to do

  Hi Lisa,

  You are able to correctly install the other updates?

  You can follow this link & check if the problem persists:

  How to troubleshoot an installation fails in Windows XP Service Pack 3?

  Hope the helps of information.

• Windows XP Professional Setup copy iaStor.sys then the OS says that it cannot copy the file iaStor.sys.

  After the RAID 0 disk partitioning, installing Windows says it will copy the files in the file system. The first file is iaStor.sys. My SATA CD drive runs for a few seconds, then there is a long pause, then the OS says that it cannot copy the file iaStor.sys. He goes on to say that I should check that there is a CD in the drive. Any ideas?

  Here's the solution to this problem:

  1. in the disk driver (a:\) root directory create a directory called holiday of $ $OEM existing files as they are, we will not delete or replace anything.

  2. in the directory $ $OEM you have created, create another directory called TEXTMODE

  3. copy all the driver files located in the root directory to the A:\$OEM$\TEXTMODE subdirectory, try to reinstall, it should now work.

• Cannot install the update of security KB2698365, get the error message ' set up cannot copy the file msado15.dll.

  Tried several times, if I check the update log it shows canceled, have tried to disable Norton. Tried to install it manually through the Setup Wizard.  He gets up then I get the message "set up cannot copy the file msado15.dll.

  Hello

  You did changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  I suggest you register the Msado15.dll file required.

  a. Click Start and then click Run.
  b. in the run dialog box, type the following commands in the Open box and then click OK.

  Regsvr32.exe ">"

  The> placeholder is the absolute path of the file Msado15.dll.

  The following examples show how you can specify an absolute path:

  Regsvr32.exe "C:\Program Files\Fichiers Files\system\ado\Msado15.dll"
  
  If the Msado15.dll file is saved successfully, you receive a message similar to the following message:

  DllRegisterServer in C:\Program Files\Common Files\system\ado\Msado15.dll successful.
  c. click OK.

  Method 3
  I suggest to perform the clean boot and then try to install the updates. Clean boot will disable all of the third-party program to ensure that all third party program is not causing the problem.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 4
  I would say that you can download and install the update to the clean boot from Microsoft download center.

  Update security for Windows XP (KB2698365)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30228

• While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  KB952155 Setup Error.

  While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3

  Eivind Aakhus Hello,

  If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.

  Follow these steps to activate the ActiveX module.

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  b. click Tools, point to manage add-ons and then click Enable or disable add-ons.

  c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.

  d. choose the one you want to activate, and then select Enable.

• blue screen (setup), saying: Setup cannot find the files temporary installation and press f3, it is that I get

  Original title: unerase my hard drive
  

  I had a work beautifully computer (Dell INSP 6000) until I decided to add Media Center to my Xp - sp3. I bought the drive from a seller on ebay with numbers of coa who did not work. The drive has been formatted by attempts of constant relocation. Using XP and Media Center disks, I can get as much blue screen (setup) saying that Setup cannot find the temporary installation files and press f3. It's that I get. I also have a blue screen telling me to insert the diskette labeled 'Windows Automated System Recovery disk' in on the floppy drive. That's all. I am doomed.

  E-mail address is removed from the privacy *.

  How to request backup discs Dell

• How to fix a packaging error - "cannot copy the linked files?

  I use a file that I used previously to a directory.  I rename to use the layout, but use all of the new images, etc.  It shows all links are good in the document, but when I go to package, I get the message that it cannot copy the related files.  I have InDesign CC 2014 and OS X El Capitan.  Any ideas on a fix?

  Looking for special characters in link names. I think that only dashes and underscores (maybe a few others) are allowed in file names. Also look for foreign language characters.

• When Microsoft Excel loads the following error occurs: Error 1406 Setup cannot write the value in the \xlsx registry key.

  I have Windows XP on a PC, I bought at the beginning of 2009.  I have been using Microsoft Office applications with no problems until now.  When I try to open Excel, the following events occur: 1) a presentation box appears and poster - "Please wait while the window configures Microsoft Office Home and Student 2007.  Collection of the required information.   2nd) another box displays the following message: Error 1406 Setup cannot write the value in the \xlsx registry key.  Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help.  For more information about how to contact PSS, see PSS10R. CHM.
  3rd, the next area said cancel, start over or ignore.   Retry and ignore just redisplays the same message box again.  When I click Cancel, the following error message is displayed - fatal error during installation.   I do not understand why this is happening since 1) I've been using Excel for quite a while and 2) I'm not trying to install office as it was installed on my PC when it came from the manufacturer (Dell).  Also, I have no problem with the opening of other Office programs.  I am the only user on this computer.  Help, please!  Thank you, Dennis

  Okie dokie.

  Well I dug on the web and found someone with the same problem, and they said that when they have disabled "McAfee VirusScan 8.5 Access Protection", this error has disappeared. If this applies to you, give it a whirl if you wish.

  But the best support that I found came from this website: http://support.microsoft.com/kb/838687. The jist of it is (trying to fix it yourself):
  Fix it myself to fix this problem yourself, follow these steps:

  1. Log the computer by using an administrator user account.
  2. Start Microsoft Windows Explorer.
  3. On the Tools menu, click Folder Options.
  4. Click the view tab.
  5. Under hidden files and folders, click Show hidden folders and files.
  6. Clear the Hide extensions for known file types check box, and then click OK.
  7. Open the following folder: C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data\
  8. If you are running Office 2003, right-click Opa11.dat, and then click Properties. If you are running Office XP, right-click Data.dat, and then click Properties.
  9. Click the Security tab.
  10. Click Advanced.
  11. Click the permissions tab.
  12. Click to select everyone in the list entered permissions and then click change.
  13. Click to select the full control check box.
  14. Click OK three times. If these steps do not resolve this issue, delete the Opa11.dat file or the Data.dat file in the following folder and then restart an Office 2003 program or an Office XP program:
      C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data

      If this does not work for you, I would take my installation CD< completely="" uninstall="" microsoft="" excel="" (or="" any="" other="" problems="" that="" are="" giving="" you="" this="" error),="" then="" install="" microsoft's="" windows="" installer="" cleanup="" utility="" (which="" completely="" removes="" all="" stuff="" pertaining="" to="" whichever="" program="" you="" delete,="" for="" you,="" excel)="" and="" then="" reinstall="" microsoft="" excel.="" this="" utility="" program="" is="" really="" powerful,="" and="" you="" can="" download="" your="" copy="" from="">http://support.microsoft.com/kb/290301.

      So, here are three options for you to try. I hope one works for you - let me know it to be.

  -Carson

  P.S. - KC Chiefs? Colts all the way! :)

• Cannot copy the email from the printer.

  Original title: printer will not email to the new computer

  I have my printer hooked up to my new computer I can print OK but cannot copy the email from the printer that I did with my previous

  CPuter I have to use my old computer! Help please

  Hello

  1 Windows operating system you are using?

  2. what happens when you try to copy the printer to enamel?

  3. you receive error messages or codes?

  4. What mail client do you use?

  5. What is the number of brand and model of your printer?

  6. did you check the configuration on the printer options (or help)?

  7. are you able to save the copy of your printer hard disk and the copy of e-mail?

  You can try to save the copy of your printer on your hard drive and try to copy or attach to e-mail and check if it helps.