Animation LOOP when I use SPRITE?

Similar Questions

• Bug (?) in preview (audio) in 2015.3 (13.8) - Audio looping when you use option frames skip

  Can someone confirm a new bug with audio playback while previewing? It seems to happen when you use the option to skip frames. This causes the audio preview loop after a few seconds, even if the video preview continues to run curly.

  It happens to me on Windows 7 and 10. The audio is a .wav file.

  The more I do the amount of frames ignored, more audio looping section becomes, so try affecting executives jump 5 for the most obvious result.

  Memory and cache purging does not solve this problem.

  This problem is fixed in update fixes after effects CC 2015.3 (13.8.1). This update, available now, can be installed by using the creative Office Cloud app, or by choosing Help > updates within any Adobe application.

• Looping FLV does not play when I use addChild

  Hi all

  Kglad wrote the code below (located in a frame of a clip to child script). It works very well to seamless loop the FLV in an FLVPlayback component in this clip.

  In the main timeline, I use removeChild to remove this clip of film when it was used. Can I use addChild to add at the time where the clip must be used/seen again. (I do it to preserve the resources of the machine).

  However, when I use addChild to add the MC back, for some reason, it does not immediately play like the first time it times. He expects a cycle before it begins to play again. Does anyone know why it does not play the moment where it is added in? ('Auto play' is checked in the FLVPlayback properties.) I can post more code if necessary.

  Thank you very much!

  The code in the script of the frame of the child clip that holds the FLVPlayback:

  Fl.video import. *;
  
  FLV animation loop
  var int index = 0;
  childMovieClip.addEventListener (fl.video.VideoEvent.COMPLETE, completeHandler);
  childMovieClip.source = "FroggyTop.flv";
  childMovieClip.play ();
  readyNextPlayerF();
  
  function completeHandler (e: fl.video.VideoEvent): void
  {
  childMovieClip.play ();
  childMovieClip.visibleVideoPlayerIndex = index;
  readyNextPlayerF();
  }
  
  

  function readyNextPlayerF (): void
  {
  index ++;
  childMovieClip.activeVideoPlayerIndex = index;
  childMovieClip.source = "FroggyTop.flv"; assign the source

  }

  Post edited by: paul_james123

  The game of the FLVPlayback instance is not dictated by its presence as a child.  Using addChild does not reset it to a starting state.  If you remove it, it remains to do everything what is done out of sight of the scene.  When you add to this is probably in the middle of everything he did while sitting in its limbo deleted.  When you remove it, you should stop it, and when you add it back in you should start it.

• When to use the cursor for loop and the cursor (open, fetch, close)

  Hello world
  I have a small doubt about when to use the cursor for loop and when to use the cursor for loop and the cursor (open, fetch, close).
  Well, I'm not the difference between implicit and explicit cursor. So please tell me how I got to know, what to use and when?
  
  
  
  
  Kind regards
  BS2012
  
  Published by: BS2012 on January 29, 2013 12:15

  All SQLs are analyzed, stored and executed as cursors. Thus, you will always use a cursor.

  The problem is that languages, such as PL/SQL, provide different interfaces to interact with the SQL cursor. As the ref, the slider interface, the interface DBMS_SQL slider interface and so on.

  Each of these interfaces offers different features. For example, using the interface DBMS_SQL allows binding dynamics and dynamic recovery. The Ref Cursor interface allows your code PL/SQL pass a handle to a reference pointing to the SQL cursor, to an external client. Etc.

  The fundamental reason for the use of an explicit cursor interface is mainly that you own and manage bulk made extraction output provided by PL/SQL cursor.

  With a cursor FOR , the motor loop of PL/SQL optimize the loop by extracting block a 100 lines both. However, you cannot access this collection in bulk directly inside the loop.

  With an explicit cursor interface, you specify the size of the extraction in bulk via the clause LIMIT , and you set the variable of collection to use. This allows you to use the collection directly variable inside the loop.

  However, the need to do - code manually in bulk collection - rarely occur in the daily programs in PL/SQL. A line of treatment is both slow and not well fits. And even if your bulk code collects lines, these lines must still be processed one at a time in your code. It is much more efficient and scalable rather write SQL code, and make the engine SQL the line of treatment for you.

• Loop Finder crash after upgrading to El Capitan.  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.

  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English.  The e is a compatibility issue with dropbox or Google drive in El Capitan?  Those are the plug-ins only that I could find.  Thank you very much.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Windows 7 infinite loop when using Robocopy

  Your report of all Junction Points shows the junction:

  C:\Users\user name\AppData\Local directory

       Application data [C:\Users\user name\AppData\Local]

  This junction creates a loop from the intersection of data Application goes back to AppData\Local which contains the output of Application data that...

  This seems to be the loop that follows you Robocopy.  I think that Windows responds to the permissions defined for the junctions as a file search is not going in a loop with the standard permissions but ran in a loop when I changed the permissions for connecting Application data under my user while trying to find out what was going on in Windows 7 based on my knowledge of Window XP.  Without knowing the existence of junctions, I did not understand what were doing all of the apparent shortcuts.

  I have fed up of my old Windows XP system and you can see why this junction is necessary.

  For Windows 7, some of the application data AppData\Local.  For example, the Outlook.pst file is in AppData\Local\Microsoft\Outlook.

  For Windows XP, the .pst file is Local Settings\Application Data\Microsoft\Outlook.

  Local settings is now a crossroads AppData/Local for Outlook will search the .pst file in AppData\Local\Application Data\Microsoft\Outlook.  This requires Application data in to be a hub to AppData\Local AppData\Local where the Microsoft\Outlook file.

  It's even worse than just an infinite loop.  I tried Robocopy files from one PC has crashed with the system drive in a USB enclosure and copy all the files on my drive (c).  The USB (f) contains the Documents and Settings junction point, but it points to C:\Users. So my attempt to copy F:\Documents and Settings resulted in C:\Users copy instead. Now the target of the copy on my C: drive - which is intended to contain all the content of the disk (f) crashed, now contains the content of my directory of users.

  I guess I can't delete Documents and Settings everywhere (including a USB key containing another image of the system) without deleting my C:\Users directory as well.

  How can I clean the misleading Documents and Settings points that have been created by the robocopy junction?

  Jacques

• To refer to a first keyframe in an animation loop

  Hi, I have an animation loop with two keyframes, I use loopOutDuration to repeat this animation for the duration of the model. I am wanting however to randomize the starting position of the first keyframe on the axis of the x. I wrote the term for this, but it applies to a distribution at random at EACH FRAME of the animation, rather than at the beginning (IMAGE 1) starting point and stick to this position of x with a constant value.

  The only solution I can think of right now is to note the length of the loop, allowing this time elapse before before applying a momentary position x change, however, I think that on a frame when I call value it will recover to what the value of the key frame is rather than the value of the expression. I hope it is clear enough...

  TLDR;

  I want an expression to change the value of a position of x on the two keyframes. What gives a random but constant value for the duration of a loop.

  I would be better off ditching keyframes entirely and make the entire animation via expressions? Or is it possible to reference in an expression?

  You can try this:

  xOffsetMin = -500;
  xOffsetMax = 500;
  //===========================
  
  t1 = key(1).time;
  t2 = key(numKeys).time;
  t = time-t1;
  dur = t2-t1+thisComp.frameDuration;
  n = Math.floor(t/dur);
  pos = valueAtTime(time-n*dur);
  seedRandom(n, true);
  pos[0] += random(xOffsetMin , xOffsetMax);
  pos;
  

  Xavier

• How to create an animation loop files photoshop without them all overlapping on the frame before the last?

  Hi, I use a mac and have attempted to create an animation loop in legacy but when I delete the last keyframe on my original composition, for some reason any all my layers of stitching to merge into one on one before the last keyframe and creates a slight glitch all along. Thank you.

  This could have cache problems. I would approach this kind of animation differently. Instead of sequencing layers could import as a sequence of images. Make sure you have defined the interpretation of your sequence of images based on the cadence of your final file. Looks like you have picked 2 image by image, the standard for animation-Cellulo. 12 fps to 24 fps project where each image is duplicated. So, if that's what you want, import your sequence of photoshop 6 framework as a sequence, the film as 12 fps, drag the sequence in a model of 24 fps which is long enough for the complete shot, enable time remapping effect, go to the last time remap keyframe using the k key and then return a frame by using the page to the top or Ctrl/Cmnd + key left arrow , add a new keyframe, remove the last keyframe and add the expression loopOut(). That's all there is to it.

  If you want to use your sequenced layers and you have a cache problem or a problem of frame between the comps rate then to restore your layer comp sequenced like a movie and loop that.

• Can't view photos on Facebook with Firefox 9.01. Do not have the problem when you use IE

  If you use Firefox (ver 9.01) on Facebook I can't see the photos/videos that are published by a friend. Only a setting with nothing iside the frame is shown other images as logos etc. are visible. Operating system is Windows 7. When you use Internet Explorer, though I can view the pictures.

  You can use the following steps to check if the images are blocked:

  • Open the web page that has the missing images in a browser tab.
  • Click the site favicon (How do I know if my connection to a Web site is secure?) on the left end of the address bar.
  • Click on the "More information" button to open the "Page Info" with the Security tab selected (also accessible via "tools > Page Info").
  • Go to the Media of the window tab "tools > Page Info.
  • Select the first link of the image and scroll down through the list with the arrow down.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  See also:

  • http://KB.mozillazine.org/Images_or_animations_do_not_load
  • https://support.Mozilla.org/KB/images+or+animations+do+not+show

• goes into infinity "tabs" loop when I type any email 'Contact us' button how can I stop the loop?

  goes into infinity "tabs" loop when I type any email 'Contact us' button how can I stop the loop?

  You use a Mac, or you're on another platform?

  Any other use of platforms:

  • Mac: Firefox > Preferences
  • Linux: Edit > Preferences
  • Windows: Firefox > Options

  Press F10, if the menu bar is hidden under Windows and Linux, or use "> Firefox Options/preferences.

  • http://KB.mozillazine.org/File_types_and_download_actions
  • https://support.Mozilla.org/KB/managing+file+types

• infinite loop when connecting to time warner cable

  I get an infinite loop when you try to connect, it keeps going to connect and flashing then go back to the login page.  This site allows me to watch TV via my internet connection that works normally, including HBO, pay-per-view movies, guide, etc.  Currently only Firefox works, but I prefer to use Safari who has this problem.

  I suggest you only begin by taking the measures recommended in this support article.

• creeping memory usage when you use NEITHER-9477

  Hi, I write output digital (4 outputs line, on request, 10 updates per second) in a loop using the DAQ assistant. When I use a NOR-9477 as the device output application use memory increases about 10 MB for 15 minutes and will eventually run out of memory.

  If I use a USB6009 as the output device, the memory usage is stable. Same code is used, the only difference is the physical channel.

  Any suggestions as to what might cause this behavior?

  

  Thanks for the tip Ravensfan.

  To distill the code down for the most part, one of the two VI is leaks memory - the NOR-9477 one. The other not...

  In any case, the solution to my problem is to convert the express VI DAQmx code.

• RIO crashes when you use tcp communication and web server

  Hello

  my controller cRIO crashes after a short time (usually less than a minute), when I use simultaneously to the web server (to interact with a remote control) and make some tcp communication (using STM 2.0 library) for data logging. Is it a problem of overall performance of the controller, or a problem of band network bandwidth (I'm happy to send some values every 100ms), or a programming problem; in the latter case, what should I do to make the system more stable?

  Kind regards

  PS: I use a cRIO 9022 with LV 2009f2 + RT and NOR-RIO 3.3.0

  Hello

  You can try with a simple while loop + delay instead of loop timed for TCP communication loop.

  Concerning

• Auto image compressed/Resized by system only when you use BIS

  Hi all

  My application download a picture, the url is the direct image (http://url/path/image.jpg). the problem is, the image I downloaded always get resized/compressed. the size to become subject to 300px wide. I check my image on the server, I have not the images in this format. and I have no code to resize an image.

  then I realize, it doesn't occur when you use the BIS connection. the return of normal images when I use the WIFI. If it is resized by RIM Server? I test on 9860 and 9900.

  Kind regards

  Danz

  Hi all

  Sorry for my late reply, I've been very busy lately.

  I did some debugging n test with my http code. Apparently, the problem occurred because I added a few headers in my http connection:

             _headers.setProperty("Profile", getProfile());
              _headers.setProperty("x-wap-profile", getProfile());
              _headers.setProperty("x-rim-transcode-content", "*/*");
              _headers.setProperty(
                      "Accept",
                      "application/vnd.rim.html,text/html,application/xhtml+xml,application/vnd.wap.xhtml+xml,application/vnd.wap.wmlc;q=0.9,application/vnd.wap.wmlscriptc;q=0.7,text/vnd.wap.wml;q=0.7,text/vnd.sun.j2me.app-descriptor,image/vnd.rim.png,image/jpeg,application/x-vnd.rim.pme.b,application/vnd.rim.ucs,image/gif;anim=1,application/vnd.rim.css;v=1,text/css;media=screen,*/*;q=0.5");
              _headers.setProperty(
                      "x-rim-original-accept",
                      "application/vnd.rim.html,text/html,application/xhtml+xml,application/vnd.wap.xhtml+xml,application/vnd.wap.wmlc;q=0.9,application/vnd.wap.wmlscriptc;q=0.7,text/vnd.wap.wml;q=0.7,text/vnd.sun.j2me.app-descriptor,image/vnd.rim.png,image/jpeg,application/x-vnd.rim.pme.b,application/vnd.rim.ucs,image/gif;anim=1,application/vnd.rim.css;v=1,text/css;media=screen,*/*;q=0.");
              _headers.setProperty("x-rim-gw-properties", "16.10");
              _headers.setProperty("x-rim-accept-encoding", "yk;v=3;m=384");
  

  I forgot which article, I got that. but I think that the headers have something todo with BrowserField. as I remember, I cannot load authentication facebook page without headers.

  I deleted just this code now.

  Thanks for your response guys!

• Using Adobe Presenter will not solve the problem of police when I use Acrobat Connect Pro?

  So my fonts in my PowerPoint presentation are not preserved when I use Acrobat Connect Pro (as it is not one of the Adobe fonts). I saw that a member of staff said that thanks to Adobe Presenter it should solve this problem, so if I buy Adobe Presenter and use it on my presentation it will preserve my fonts and also my animations/transitions, etc? Thanks in advance

  It should be. The problem is that when you load a PPT (X) at Adobe Connect it converts to a Presenter presentation. However, it can use only the fonts on the server, which is the basic MS fonts. Publishing locally with the presenter should allow you to use the fonts you have on your computer, so this issue. Your animations and transitions must also be preserved, but you will have your animations sur-Cliquer for control when they are placed in Presenter.