Animation of edge becoming over time lag

Similar Questions

• Svchost size seems to me like svchost (s) becomes larger and larger over time (between restart).

  original title: svchost size

  It seems that svchost (s) becomes larger and larger over time (between restart).

  He/they tend to reach the top of the sort (PWS) in memory of my task manager.

  It automatically get rid of her... whatever... it is now for use by more than one process (when they are no longer used)?

  If not, is there a way for him to say?

  Hello

  Sometimes you try more than once (the link of MVP) and there may be a site
  issue.

  Try this link to my profile
  https://MVP.support.Microsoft.com/profile=D2CBAC3A-D59A-4085-BA97-22B57FD00DF2

  Here is the link to the signature
  https://MVP.support.Microsoft.com/profile/Rob1

  I tried to answer the question in paragraph 1 above. Unless you encounter
  a kind of system problem the SVChost in Taskmanager will vary, in particular
  so shortly after a restart. And when you use the computer SVChost entries will be
  adding and removing management tasks on the fly. Check the information in the upper part
  two links in my previous answer.

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Animation animate edge does not start the first time I load the page. But the second time.

  Hi all

  I have problems with animation of edge on a web page. It does not load the first time the page is loaded, but charge very well the second time or at any time after that. To test I empty my cache, then reload the page. It seams to work in Internet Explorer, the first time, but not Firefox or chrome.

  I have a temporary copy of the page here... http://emiwip.com/Monique-Mathieu/landing-page-WIP.html

  Can someone tell me what is happening?

  Thank you.

  Dan

  I found the answer here... Publication is no longer works in the latest edge

  It seems that you need to load the last jQuery in the head of the pag. That suits him.

  Dan

• How to create a list of chips which is aligned which can occur over time (such as powerpoint)

  Hi all. I'm trying to figure out how to create a list of chips for a training video that will appear gradually as the voice on reveals each point, without the need to have a separate title for each point. Even if I create bullets, especially how to align and having the good spacing between each sentence. Basically I want it to be like an animated Powerpoint slide! Please can someone give me advice on how to do this than all my text/bullet alignment points and are spaced evenly. Thank you!

  Each line is revealed over time:

  Title

  • Point 1
  • Point 2
  • Point 3

  Do in the Titler, and start with the complete list of ball.

  Then create "new title based on the current title" and remove the bottom line

  Do so until that there is only a line on the left.

• Over time fill color

  Hello, I am working on an audio model. I'm doing a waveform similar to that which you can see soundcloud. I managed to program an expression to generate the waveform. But I have a problem with filling the waveform with a color based on the time. For example, see you on soundcloud how the waveform fills orange along the song? This is the concept, I am working on that. Here's what I have so far:

  

  I want the blue bar to move to the right over time, but I want only the white parts of the wave to turn blue it progresses (the rest of the hidden solid blue). How would I go to do this? My knowledge in After Effects is limited, so any help is GREATLY appreciated! Thank you

  Please let me know if you need more information

  So just to clarify you are trying create a representation of levels for the duration of an audio file and not an animation audio frequency analysis. If that's what you do just before compose hundreds of layers, or nest the comp in your main comp, then use the cache by approach. If it was me I would probably just import the audio layer in the comp, press the L key twice to reveal the audio waveform, press on the ~ key to make complete timeline screen, expand the waveform, take a screenshot, add the screenshot to the model, apply Keylight, then add a shape layer below the screenshot set the screenshot as a reverse alpha cache approach for the animated gradient and be done with it. This model should be nested in my main computer to complete the effect.

  

  If I wanted a different look for the waveform I edit the screenshot in Photoshop or use a Premiere Pro or any other program to capture a screenshot of the wave. Since you did all the work of your hundreds of layers I just would compose before them, place a layer of shape with a gradient animated below the pre-comp and put in place the track matte.

• Poor memory - rendered Management slows over time

  I noticed a problem with my renders involving sequences. animation and not purely of the layers of things etc, but based on sequences of images as assets. I have a lot of free RAM initially with no other open applications. When I start making my CPU usage is very high and AE takes memory and gives him a number of aeselflink processes. Over time however in my iStatMenus I can see my 'active' RAM drag and my 'inactive' RAM goes upward, while at the same time my CPU usage slowing down my render grinds gradually stopped. It's like once it loads an image of my images in RAM for rendering, that he cannot let go of it completely once it is done so gradually, he eats all my RAM and my rendering slows down. If I stop the rendering and nothing do but running an application to empty all the 'inactive' in 'memory' memory and restart immediately made things are in their fast normal operation. He then proceeds to gradually slow down again. Everyone knows what is happening here? All the images located on the external eSATA drives and are made to external eSATA drives. Here are my specs for reference:

  AE CC 2014 (v 13.0.0.214)

  Mac Pro (early 2008) 3.1 8-core

  18 GB OF RAM

  Memory and multiprocessing:

  18 GB installed RAM

  RAM to leave for other applications 5 GB

  CPU reserved for other applications 2

  Allocation of RAM per CPU / 3GB

  Real CPU that will be used 3

  Any ideas would be greatly appreciated. Thank you!!!

  Robert

  What is the State of reduce the size when system is low on memory Cache preference?

  I describe this preference here:

  http://blogs.Adobe.com/AfterEffects/2012/10/after-effects-CS6-11-0-2-update-bug-fixes-and-added-GPUs-for-ray-traced-3D-renderer.html

• animation of edge always comes to the front of the doc id when played

  Hello.

  How do an animation of edge remain at the back of the other text etc in an indesign doc, he always comes to the fore and covers some of the other elements when played on iPad.

  GAV

  The so-called overlays for a reason. You cannot have static content

  top of interactive content.

  Convert static content in a scrolling frame or an MSO to

  force it over animation.

• Animation of edge trigger on the loading of the page

  I use several Animations of edge in a DPS document I created.  When I opened the book, all of the animation start playing at the same time.

  Is there a way to trigger the animation starts when the user turns the page on animation?

  The value of the retard.125 seconds.

• Animated border and wordpress: loading time

  Hi lovely people of edge!

  I have a site for which I develop some interactive maps using edge. I have no idea how the code so most of my functions is limited to the deactivation of the elements to get things to do what I want. Very basic, I know, please don't laugh too much!

  It's a (custom) Wordpress site and I use the plugin suite of edge to get the edge on the site animations.

  My question is about the load time and the size of file for edge entertainment. My .oam files are approximately 1.5 to 2 MB. Is this great? Should I aim for smaller?

  This is a link to a page on the site:

  e-sheep-at-a-beautiful-coastal-Farm-Park/ http://everywhereyougo.co.nz/2013/04/Duder-Regional-Park-Walking-and-picnicking-amongst-th

  The animation of edge load she particularly slow for you? Doesn't load it at all? I would be interested in your comments!

  Thank you much in advance,

  Lisa in New Zealand.

  Hey, Lisa.

  The animation loaded for me very well, but look in the Net Panel in Firebug shows that a number of your SVG is more of 300K.  This seems quite expensive in a perspective of bandwidth, and the fact that you have a handful of these files which size adds up to 2MB fairly quickly.  Hope that helps,

  -Elaine

• Animation of edge of Wordpress site slow to load.

  Hi the intelligent edge.

  I have an animation (single) Edge, that I put in a Wordpress site but it takes forever to load when you look at the site on a browser - try on ipad, Google chrome, firefox, and safari. The .oam file is 1.9 MB. That is great?

  Here is the link (site development, so a little messy!):

  http://everywhereyougo.co.nz/2012/11/Shakespear-regional-Park-2/

  How it loads for you? Clues as to the reasons, it is slow?

  Thank you!

  Lisa

  Hi Lisa,

  first of all thank you for using EdgeSuite for wordpress. Did you use shortcodes? He would be allowed to use your site as a reference for the rest of the edge, I would list on edgedocks.com if you would agree?

  Now to your question: looking at network traffic, you can tell that your homepage is more then 3.1 MB big, that's quiet a lot. Use google pagespeed extension for chrome, yslow for firefox, tab network firebug or just http://www.webpagetest.org to get an idea of what's going on.

  For example, the three icons FB, twitter, vimeo are each big 500Ko, so these three icons are already have your page size. It's a difficult thing, but probably not the only reason for your publication load slowly. You use a lot of small assets, it takes just takes time to load these. The composition is immediately responsible locally? If you want to further reduce loading times, you can use spritesheets. You can combine the small images in a larger picture and clip the focus when you use the image as a background for a div. And try to reduce the Photo1 2 3, each 150KB large.

  What is, adding a preloader for the animation, the user then at least know that there is more to come.

  A few suggestions.

• animations of edge not always begin

  Hi, I have an animation of edge I want to insert into an article of dps.

  I published the file .oam then inserted one in indesign. I gave him the AutoPlay feature and test.

  the animation isn't always play, some time it starts after a round trip of another article.

  The animation is a simple animation without code or interaction, it does not anywhere any stop().

  I even tried to import it as html and not .oam, but with the same result.

  PS. the animation plays in the preview indesgn and the browser.

  Let us know,

  Thank you very much

  MC

  Edge Animate 1.01 is now available for download, providing a fix for a nasty bug iOS6 the deployment of several compositions animated DPS. If you use EA in conjunction with the DPS, please download the update. Instructions and release notes can be found here:

  imate.html http://helpx.adobe.com/edge-animate/release-note/release-notes-edge-an.

• Since the installation on my Windows 7 64 - bit installed, Firefox has constantly gotten slow that hour passes, hangs for 10-15 seconds at a time and just gets worse over time with updates and all.

  Since the installation on my Windows 7 64 - bit installed, Firefox has constantly gotten slow that hour passes, hangs for 10-15 seconds at a time and just gets worse over time with updates and all. It was fast when I installed first, but of the six latest mos has slown to a crawl.

  upgrade your browser Firefox 8 and try

  • getfirefox.com

• Can I create a spreadsheet to track events over time?  If so, how?

  Is it possible to use the numbers to track events over time?  Dates would be the only numbers you use.

  Can you give more details on what you are looking to do?  Surely you don't want only a column of dates...

  SG

• Want a ramp of output voltage over time and measure input 2 analog USB-6008

  Hello

  I want to produce an analog voltage output signal that increases over time with a certain slope, which I'll send in a potentiostat and at the same time I want to read voltage and current (both are represented by a voltage signal) that I want to open a session and ultimately draw from each other. To do this, I have a DAQ USB-6008 system at my disposal.

  Creation of the analogue output with a linear ramp signal I was possible using a while loop and a delay time (see attachment). Important here is that I can put the slope of the linear ramp (for example, 10mV/s) and size level to make a smooth inclement. However when I want to measure an analog input signal he's going poorly.

  To reduce noise from the influences I want for example to measure 10 values for example within 0.1 second and he averaged (this gives reading should be equal or faster then the wrong caused by the slope and the linear ramp step size.) Example: a slope of 10 mV/s is set with a 10 step size. Each 0.1 s analog output signal amounts to 1 mV. Then I want to read the analog input in this 0.1 s 10 values)

  Because I use a timer to create the linear ramp and the analog input is in the same loop, the delay time also affects the analog input and I get an error every time. Separately, in different VI-programs (analog input and output) they work fine but not combined. I searched this forum to find a way to create the ramp in a different way, but because I'm not an experienced labview user I can't find another way.

  To book it now a bit more complicated I said I want to measure 2 input analog (one for the voltage of the potentiostat) signals and one for the current (also represented by a voltage signal) and they should be measured more quickly then the bad of the analog signal. I have not yet started with because I couldn't read on channel work.

  I hope someone can help me with this problem

  An array of index. You want to index the columns for a single channel.

• Plotting the amplitude of a spectral peak over time

  Hello

  I am creating a VI where the acquired continuously DAQ, plots and save a waveform in millisecond delay (which is already done in this case), then takes this waveform, finds a specific pic (probably the first) and trace the amplitude of this pic over time (+ 30 minutes, one point each scan which is obtained). Essentially, I have a detector quickly attached to a chromatograph, and I want to select a single ion and monitor the amplitude of this ion. I can draw the waveforms along with it in post processing, but I want to do is to have the 'slow' constantly plot to update and display when it moves through time. Joined the VI will go in, using IMS software V1.3.vi, the paragraph is the "GC" Mode it seems I should use the "peak detect.vi.", but I'm not familiar with this operation, and so I don't know how to show a constantly updated graphic or remove the amplitudes and draw. Thank you for your help,

  <><>

  Eric-WSU wrote:

  I get an amplitude on plot of time, but it does not appear until after all the iterations are stopped

  I have not watched your VI (because I'm in a previous version of LabVIEW), but it's probably because your graphic is outside the loop.

  Here's how you can get a graph of the peaks (all vertices, by iteration):

  

  Or if you want to only a certain PEAK (and how this pic changes with the number of iterations):