Animation of Instances of an object created by a For loop

Similar Questions

• Windows Exception object; Create a failure for window...

  OS: Windows 7; 64 bit

  I recently installed an older program that works ok.

  Now when it is launched I get an "Exception ObjectWindows of" error window with the message "failed to Create for window... ».

  There is no change of the system, but clearly something has changed. I don't know what happened or where to start looking for the problem.

  Thank you...

  Have you considered a type of Virtual Machine solution?

  Windows Virtual PC
  Download Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."    If you have an old XP CD (or other older Windows CD) available you can simply download the Virtual Machine and spend the XP Mode download.

  This warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look.  Of course you will need a licensed copy of XP to install and run in any of them (except XP Mode).

  VirtualBox is an impressive VM competitor
  http://WindowsSecrets.com/search/?CX=017937947691920082874%3A_ilcm6kdy_y&COF=FORID%3A11&q=VirtualBox+is+an+impressive+VM+contender+&SA=search&advWS=1&advSAN=1&advPages=15

  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  Windows Anytime Upgrade: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions

  This example may or may not work for you with your program, use the built-in Administrator account to perform the installation?

  "It seems that the"Run as Administrator"command gives you administrative privileges only, and they are not enough to install Java (and OpenOffice, by association). To work around this problem, you must actually connect to the built-in administrator. Open a command prompt with admin rights by clicking Start, type cmd in the search/run box, hit CTRL-SHIFT-ENTER. At the prompt, type:

  NET user administrator / Active: Yes

  Then disconnect from your regular account and folder administrator integrated, where you might be able to install the program. When you are finished, open a session to your regular account and, for security reasons, disable the built-in using administrator account:

  «net user administrator / active: No.»

  Solve installation errors using the SubInACL tool to repair the file and registry permissions
  http://blogs.msdn.com/astebner/archive/2006/09/04/solving-Setup-errors-by-using-the-Subinacl-tool-to-repair-file-and-registry-permissions.aspx

• Creating tables in a nested for loop

  Hi all.

  I was stuck in this problem for quite a while now and I still don't know how to continue. Some outside the entrance would be greatly appreciated!

  I'm doing the following:

  -Take an array of numbers, to check if they are within a certain range (e.g. between 2 and 4)

  -Build two new arrays: one with all the numbers that are inside the beach and the other with the rest.

  An additional condition is that the amount and value of the range conditions will change (for example, it could be between 2 and 4 only / 2, 4 AND 6 and 7 according to the entry)

  To treat this, I created two nested for loops - one that goes on a table that contains conditions of the beach and inside that actually go and check if the values are in the range. I think I did that part successfully, but the next part is confusing to me - how to actually create the tables separated within two loops for?

  My apologies if I did not explain it well. Another method to support this problem is I want to translate following LabVIEW:

  Ranges of table / / [1 5 7 10] exodus-> This means we want to divide numbers based on those who are in (1,2) and (4.5) against those who are not

  Table of values / / [2 3 6 11 3]

  EndOperationDelegate table / / array of values within the range
  Table outValues / / Array of values out of range

  for m = 1:size (ranges)

  for n = 1:size (values)
  If (THE NUMBER IS on the INSIDE of EACH RANGE)
  EndOperationDelegate = [EndOperationDelegate NEWNUMBER]
  on the other
  outValues = [outValues NEWNUMBER]
  end

  end
  end

  Sounds easy enough, but it gets so chaotic with Labview that I don't know what to do. I have attached a reference image - insertion in the array function is not in fact add to the table, it creates a new table. How can I save that for when the nested for the ends of the loop?

  I have seen a few examples with shift registers which lie in a loop and I couldn't successfully that transfers in my block diagram.

  Any help/direction would be greatly appreciated.

  Hello!

  See the following example to understand how you can create a table in the loop For

  

  In your case, you also can uce conditional terminal to create a table only when then located nearby. It makes the code much cleaner that the structures of the case

  Hope this helps, if not, let me know if I can help you!

  Marcin

• How can I associate unique information / variables with different instances of attachMovie when creat

  I am creating an interactive animation of experience, whereby the user must detect if there is a well of oil beneath the surface by selecting and drill a series of points of coordination on a map.

  I did the first step in establishing a background image containing a grid of 20 x 20 points coordinates, for example 1-20 columns and rows A - T. On top of that, I created a dynamic array of clickable objects (open circles) and the center of each is placed on a coordinate point, so when you hover over a coordinate point, for example, C3, an open circle becomes visible and when you deployment, it becomes invisible.

  However, I am stuck on the next step. I need to be able to assign variables unique to one or more clickable objects (open circles). Is it possible to do? For example:

  coordinates of the grid point give a) to each object (open circle), so, for example, if someone rolls the coordinate of the C3, the empty circle (object) associated with this coordination, a message appears: "Click on the point of grid to Pierce in C3"

  (b) assign a variable to one or more objects, so that when the user clicks on an open circle, the animation associated with that point of coordination will be triggered. There will be different animations, depending on which object (point is clicked)

  There are other variables that will need to be installed, but if I know how to assign variables to one or several objects, I can probably figure out the rest.

  Here is a copy of my code so far:-

  set up the grid for solid table

  spacing = 5.75;

  cols = 20; the number of columns in the grid

  lines = 20; number of grid lines

  leftMargin = 154;

  topMargin = 169;

  depth = 100; starting point for the depth

  for (i = 1; I < = lines; i ++) {}

  for (j = 1; j < = cols; j ++) {}

  current = attachMovie ("openCircle_mc", "openCircle_mc" + i + "_" + j, depth ++);

  Current._x = leftMargin + ((i-1) * (spacing + current._width));

  Current._y = topMargin + ((j-1) * (spacing + current._height));

  Open the circle initially invisible, visible on rollover

  Current._alpha = 0;

  current.onRollOver = function() {}

  This ._alpha = 100;

  }

  current.onRollOut = function() {}

  This ._alpha = 0;

  }

  }

  }

  Here's the background and a roll in the instance of the object "openCircle' in 'C3 '.

  

  I would appreciate help. Thank you very much.

  Pippa
  

  You can assign properties (and methods) to clips:

  set up the grid for solid table

  spacing = 5.75;

  cols = 20; the number of columns in the grid

  lines = 20; number of grid lines

  leftMargin = 154;

  topMargin = 169;

  depth = 100; starting point for the depth

  for (i = 1; i<=rows; i++)="">

  for (j = 1; j<=cols; j++)="">

  current = attachMovie ("openCircle_mc", "openCircle_mc" + i + "_" + j, depth ++);

  Current._x = leftMargin + ((i-1) * (spacing + current._width));

  Current._y = topMargin + ((j-1) * (spacing + current._height));

  Current.Row = i;

  Current.Col = j;

  Current.Oil = Math.floor (Math.random () * 1.1);  about 1/10 objects have oil = 1, 9/10 oil = 0

  Open the circle initially invisible, visible on rollover

  Current._alpha = 0;

  {current.onRelease = function ()}

  trace (this.row + "" + this.col +"" + this.oil);

  }

  current.onRollOver = function() {}

  This ._alpha = 100;

  }

  current.onRollOut = function() {}

  This ._alpha = 0;

  }

  }

  }

• "Object reference not set to an instance of an object." on track

  Dear members,

  Today, I tried to "build and Run...". ' a rule base that I created some time ago and executed correctly. Now, I get the error "Object Reference." not set to an instance of an object When I try to run the basis of rules using Oracle Web determinations (construction is always successful). When I run the basis of rules by using "build and debug...". "no errors are presented and the basis of the rule is executed successfully as well. I can also access the basic rule in my web browser without having any problems. I expect that the cause of the problems lies in the recent installation of Google Chrome or Mozilla Firefox, but I don't know where to look for a solution. I already tried to install the latest version of the Oracle Policy Modeling, but the error has not been resolved by then.

  Dear Frank,

  Thanks for putting me in this direction. I never looked in the browser by default settings, because they never changed. In other words, Microsoft Internet Explorer is and has always been my default browser. Do even Mozilla FireFox or Google Chrome my default browser solved the problem (partially). Since we are analysts we of course want to know how the problem occurred. In addition, because the problem is not completely solved yet, it seems to be some sort of bug left in the Oracle strategy modeling.

  • I used the modeling of the Oracle strategy for six months without having any problems. The basis of rules was always run correctly in Microsoft Internet Explorer (which has been configured as the default browser).
  • I installed Google Chrome and Mozilla FireFox at the same time, but has not changed my default browser settings (so Microsoft Internet Explorer is the default browser).
  • Run a basic rule of now caused the "object reference is not set to an instance of an object." even if the default browser has been set successfully.
  • I changed the default browser to Google Chrome or Mozilla FireFox (which of the two is not serious) and rules was performed correctly in the specific browser.
  • I changed the default browser to Microsoft Internet Explorer, but the Oracle strategy modeling keeps using my default browser defined previously (Google Chrome or Mozilla FireFox).

  From there, I guess we can conclude that the Oracle Policy modeling does not resemble the right registry key to determine the default browser. In other words, Oracle Policy modeling is unable to identify Microsoft Internet Explorer as the default browser, where other applications (like Google Chrome and Mozilla FireFox) do this properly. I expect that the HKEY_CURRENT_USER\Software\Classes\http key is sought (which did not exist after I installed Google Chrome and Mozilla FireFox), but for the Windows operating system this key is only used until Windows XP. Windows Vista from the HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\Associations\UrlAssociations\http\UserChoice key should be used to find the default browser settings.

• Error "Object reference not set to an instance of an object" when you try to use a disk with vSphere Client

  Hi all

  I searched exhaustively positions but found no answear that.

  I'm trying to access a virtual disk that is free (no machine not in use now).

  For this purpose, I am went to a virtual computer, then clicked on edit settings - & gt; Add hard drive - & gt; use a disc

  Then, when I am prompted for the disk, I select it and click ok.

  When I click on 'Next', you will receive the following message:

  Object reference not set to an instance of an object

  (it seems really in Spanish: Referencia an object no set como UN instance object)

  And then the next button appears as non-cliquable.

  Any suggestions?

  It could be related to the .NET Framework, so I write here the versions I have currently installed:

  .NET framework 2.0 SP1 LanguagePack

  .NET framework 2.0 SP2

  .NET framework 3.0 SP1 language pack

  .NET framework 3.0 SP2

  .NET framework 3.5 SP1

  All this with the patches.

  Thank you in advance for your help!

  Juan J.

  PS: I found there was information about the lost pilots and VSphere Client. I already changed those:

  %RootDrive%\%ProgramFiles%\VMware\Infrastructure\Virtual infrastructure Client\Launcher

  Where I copied libeay32.dll and ssleay32.dll

  I would then watch the logs on the ESXi console.

  Re-create the error, and then search for log entries that appear at the same time.  That should shed more light on what could be causing it.

  Good luck!

• How to access an instance of an object through activex

  I try to retrieve data in real time to a FSA pressure mapping system and uses the activex of LabVIEW tools to connect.  I interfaced with hardware (can recover soap operas and others), but were not able to read real data.  The company programmers use Javascript for their programs and know nothing of LabVIEW.  Here is the info I got from them so far.  I'm reading an instance of an object through its activex reference.  Got out readings, I'm stuck trying to read an individual reading.  Thank you

  The InterfaceModule.Read method returns an object Frame.  The framework
  
  object contains a collection of one or more readings (Frame.Readings).
  
  There is an indication for each sensor connected to the IM table.  If
  
  they use a single mast, then the reading will be in
  
  Frame.Readings (0).  Value of pressure of the probe is contained in the
  
  Property Value of Reading (Reading.Value (column, row)).
  
  So to take a read and retrieve the pressure for sensor A1
  
  (column = 0, = 0 line):
  
  ...
  
  Frame = im. Read();
  
  pressureA1 = section. Readings (0). Value (0, 0);
  

  Difficult to say without having the ActiveX library, but there is probably a method "Item" that will allow you to access a specific element in the collection. For example, with Excel ActiveX library you can get to a specific worksheet to the collection of sheets in a workbook by using the Item method, as in the attached photo. Note that you may need to convert the object returned in the appropriate type, depending on what is returned. For the Excel library the 'Article' method returns a Variant.

• Object reference not set to an instance of an object

  After the opening of the "Microsoft SQL Server Management Studio" for SQL 2012 and tries to connect to the server, I get this: reference object not set to an instance of an object. (Microsoft.VisualStudio.Platform.WindowManagement)

  

  

  Can someone HELP me please? I'm VERY NEW to this...

  Thank you for your time!

  Install a service pack sql or sql to reinstall or repair. Something must have erased part of the installation, it has not installed right or he needs a SP for SQL.

  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/b04f3626-87f8-475D-8277-276efb6b4cac/object-reference-not-set-to-an-instance-of-an-object?Forum=sqltools

  It is a forum for windows users. I post a question on this forum, it will be more useful, because they treat of this

  Good luck

• "Reference to the error object not set to an instance of an object."

  Why after an automatic update of windows 7, I get this error "error object not set to an instance of an object reference"?

  Hi AHurst,

  1. When you receive the error message?

  2. the updates have been installed on the computer?

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  If the problem does not still in safe mode, and then perform the clean boot procedure to verify if a third party installed on the computer program is causing the error message.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Message = "Object reference not set to an instance of an object."

  I was running my site Visual studio in mode on the local computer and everything worked very well. I added something to your cart, then it looked as if we'd send her to the last step before you check out through paypal and I closed it. That must have caused a problem because after that, when I tried to open another page, I get this message:

  System.NullReferenceException was unhandled by user code
  Message = "Object reference not set to an instance of an object."
  Source = "App_Web_iy6hza-b".
  StackTrace:
         at ASP.controls_shoppingcartbox_ascx.__DataBind__control4 (Object sender, EventArgs e) in c:\A_Taurus\Controls\ShoppingCartBox.ascx:line 14
  to System.Web.UI.Control.OnDataBinding (ByVal e As EventArgs)
  to System.Web.UI.Control.DataBind (Boolean raiseOnDataBinding having)
  to System.Web.UI.Control.DataBind)
  at System.Web.UI.Control.DataBindChildren)
  InnerException:

  And when I've debugged, it stopped in the code of the controls/ShoppingCartBox.ascx and gives to this line in yellow:

     
    
       
          
          
           < %="" #="" eval("title")="" %="">- < %="" #="" (this.page="" comme="" basepage).formatprice(eval("unitprice"))="" %=""> (< %="" #="" eval("quantity")="" %="">)
          
  
              
    

  And debugging box States: NullReferenceException was unhandled by user code.

  Object reference is not set to an instance of the object.

  It gives then a few suggestions like the use of 'new' somewhere but I don't know where I would put that or if it would help.

  Help please!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Object reference not set to an instance of an object in c#

  I'm getting "reference object not set to an instance of an object in c# when I try to access the data using the cobol program.

  We did already shape 5 windows and have applied the same code on this form, but only this form get the error.

  so my question is that is it possible that this problem occurs the cobol program.

  Thank you

  I'm getting "reference object not set to an instance of an object in c# when I try to access the data using the cobol program.

  We did already shape 5 windows and have applied the same code on this form, but only this form get the error.

  so my question is that is it possible that this problem occurs the cobol program.

  Thank you

  Your question is probably better asked in this forum: http://social.technet.microsoft.com/Forums/en-US/home

• Together-NetworkAdapter - object reference not set to an instance of an object.

  Guy.

  I moved a bunch of virtual machines to a group that had a vSwitch Standard to a cluster that has a distributed vSwitch. Now I'm banging my head against the wall with this one. I thought that the code below would work but I get a message

  All-NIC

  Object reference is not set to an instance of an object.

  What I'm doing wrong here?

  --------------

  SE connect-VIServer SERVER1

  $OldNetwork = 'EU VDI ILIO network storage'

  $NewNetwork = 'EU UCS VDI Port Group (VDI Desktops - VLAN148).

  Get - VM | Get-NetworkAdapter | Where {$_.NetworkName - eq $OldNetwork} | Together-NetworkAdapter - NetworkName $NewNetwork - confirm: $false

  Strange... it works for me, but I used double quotes and I have no spaces in the names of dVportgroup:

  $myNetworkAdapters = Get-VM wintest1 | Get-NetworkAdapter -Name "Network adapter 1"
  myVDPortGroup = Get-VDPortgroup -Name "v4094--BLACK_HOLE"
  Set-NetworkAdapter -NetworkAdapter $myNetworkAdapters -Portgroup $myVDPortGroup
  

  Try with oneliner (sorta, that you always need myVDportGroup variable):

  $myVDPortGroup = Get-VDPortgroup -Name "EU VDI Workstations PortGroup"
  Get-VM Test| Get-NetworkAdapter -Name "Network adapter 1" |Set-NetworkAdapter -Portgroup $myVDPortGroup
  

  If repeated failure, please provide an output of command "get-member" against your variables (gm is an alias):

  $myNetworkAdapters|gm
  $myVDPortGroup|gm
  

• Maximum number of instances that can be created on an oracle server?

  Hi all...

  Can you tell me what is the maximum number of instances that can be created on an oracle server?

  Thanks and greetings

  Raymond Vinay

  Raymond Vinay wrote:

  Hi all...

  Can you tell me what is the maximum number of instances that can be created on an oracle server?

  Thanks and greetings

  Raymond Vinay

  The answer would be that as much as the ram in the server will stand. Is not limited the case as such. Maximum of how many you have created so far?

  Aman...

• For each object, create a new layer and rename it

  Hello!

  I want to export an Illustrator file to DWG, and I have many things I want to keep the name. But to keep this info in AutoCAD, I need to transfer them as layer names (DWG/DXF export does not record the name of the object, but the name of the first level layer) and put all these layers as layers of level first (DWG/DXF export maintains just first layers of level).

  So I would like to make or find a capable script something like this:

  in my file,.

  for each object,.

  see if there is a layer with the name of the object

  If there is any layer with the same name

  then

  Create a layer,

  give the name of the object to the layer

  endif

  Place the object in this layer

  Is there someone who can help me?

  Thank you!

  You can select your layer, then use "Release to layers", which will create a sublayer for each object that you have, and then a script can rename these layers based on the named object it contains... so you can drag them all out of their layer sublayers parent so that they become the main layers... everything that is explained here, including the script

  Selected lap HAVE sublayers in top-level layers?

• Is it possible to export objects created by the user who is in system schema?

  Legends of dear,

  I need your help which is at - it a way to export the user objects created in the schema of the SYSTEM? Sorry I hope the question is silly, but unfortunately one of our user created all their objects in the SYSTEM schema.

  Oracle 11g XE Windows environment

  1. we try to identify objects created by the user of the SYSTEM.

  2. check the number and names of objects with tables, procedures, functions, triggers, and sequences.

  Thank you

  Knockaert

  karthiksingh_dba wrote:

  Legends of dear,

  I need your help which is at - it a way to export the user objects created in the schema of the SYSTEM? Sorry I hope the question is silly, but unfortunately one of our user created all their objects in the SYSTEM schema.

  Oracle 11g XE Windows environment

  1. we try to identify objects created by the user of the SYSTEM.

  2. check the number and names of objects with tables, procedures, functions, triggers, and sequences.

  Thank you

  Knockaert

  Search the object created recent & owned by SYSTEM.

  Since duhveloper object creation, then would have same DDL to repeat once again, in different schema.

  It is a professional organization that maintains the source code in the code repository?